“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10052377
Manufacturer Communication Number: TA-20004
Summary
SAF-HOLLAND: INFORMATIONAL INSTRUCTION TO BE USED IN CONJUNCTION WITH SERVICE MANUAL REGARDING THE REMOVAL OF OUTER ROUND CAM WASHER AND INSTALLATION OF NEW S CAM GUIDE PLATE FOR DRUM BRAKE AXLES. NO MODELS OR MODEL YEARS LISTED. *PE
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
SAF-HOLLAND | ADL |
Service Bulletin
Drum Brake Axles
S-Cam Guide Plate Installation
These instructions are to be used in conjunction with the SAF Service Manual for Drum Brake Axles XL-TA10006OM-en-US Rev A available on the SAF-HOLLAND website at www.safholland.us. All safety procedures contained in the Service Manual MUST be read and understood before starting any work on the suspension/axle.
- Remove the following by referencing the appropriate Section of the SAF Service Manual for Drum Brake Axles: a. Wheels and brake drum, Section 6.
- Brake shoes, Section 13.
- Automatic slack adjuster, Section 15.
- S-Cam, Section 17.
- Remove and discard the outer round cam washer (Figure 1).
- Install the new S-Cam guide plate. The S-Cam guide plate MUST be installed with the tabs bent toward the center of the vehicle and the wider space between the bent tabs toward the axle (Figure 2).
- Install the S-camshaft according to instructions in Section 18 of the SAF Service Manual for Drum Brakes Axles.
- Make sure that the newly installed S-Cam guide plate is properly orientated (Figures 3). DO NOT install the S-Cam guide plate with the tabs toward the S-Head (Figure 4) or with the narrow space toward the axle (Figures 5).
- Install the following by referencing the appropriate Section of the SAF Service Manual for Drum Brake Axles: a. Brake shoes, drums and wheels, Section 14.
- Slack adjuster, Section 16.
- Verify brake adjustment according to the procedures in Section 19 of the SAF Service Manual for Drum Brakes Axles.
XL-TA20004SB-en-US Rev A 2013-05-29
TA-20004
https://www.nhtsa.gov/recalls?nhtsaId=10052377
https://static.nhtsa.gov/odi/tsbs/2013/SB-10052377-8280.pdf
- Easily Removes and Replaces the S-Cam Return Spring.
- The tip design cradles the return spring to keep it from sliding off.
- Heat treated material and extra-long shaft provides strength and stability.
- Ergonomic handle for comfort.
- 2-in-1 S-Cam Brake Tool, offers technicians a more efficient method for changing brake shoes on an S-Cam drum brake assembly
- The tool is comprised of a steel shaft with a U-shaped fork on one end to stretch the retaining spring so that both halves of the brake shoe are held together, which enables the user to hook up the pin
- An S-shaped device on the opposite end enables the user to position the brake shoes in a way that allows leverage for installation of the rollers
- The hooked end pulls the brake shoes apart so that the rollers can be installed faster and more safely
- Function: Safely replace brake shoes on heavy-duty tractors and trailers
- Hook Design: This tool has a little hook that engages the spring at the J eye on the end, and the bar goes under the axle to leverage the spring out of position
- Easy to Use: Simply hook the retaining spring loop and press down against the axle.
- Material: Made of high quality steel. Corrosion-resistant & Durable Steel construction with extreme anti-wear property.
- Package Include: 1pcs Air Brake Spring Tool
- 【GREAT COMPATIBILITY】-- This brake return spring tool fit for large trucks and trailers with air brakes with S cam design. Use for install and remove return springs on commercial truck and trailer.
- 【WIDE APPLICATION】The Spring Tech Tool compatible with s-cam return spring. If is s-cam brake type, the Truck Brake Spring Tool works on the return spring install/uninstall.
- 【EXCELLENT FUNCTION】-- Provides leverage to back out brake shoe and remove roller cam. The tool can cups the return spring to prevent it from sliding off and possible injury. The end with unique slight bend design to make it fit better and not slip as easily.
- 【EASY TO USE】-- Safely, quickly and easily remove and install the return spring. Slide the Brake Return Spring Tool between the shoe webs over the top roller and hook the top of the return spring below the coil. Push down on the handle and unhook the spring from the pin by pulling back or pushing forward on the handle depending on the direction of the spring opening.
- 【SUPERIOR QUALITY】-- Made of high quality steel, will no deformation and not break. surface black coated to ensure resistance to corrosion and rust, protection and years of trouble-free use. Non-slip, extra long handle provides excellent stability.
- OTC's S-Cam Air Brake Spring Tool eliminates makeshift, unsafe methods of unhooking and reconnecting brake shoe retaining springs
- For use when replacing brake shoes on heavy-duty tractors and trailers
- Simply hook the retaining spring loop and press down
- Lever action agains the axle makes the job a snap
- Crafted from high-grade materials to ensure quality performance over the lifetime of the tool
- -Brakes Tool for Trucks- Heavy duty, anti-corrosion materials ensure high performance of the brake repair brake adjusting tools.
- -Easy to Connect and Disconnect- Rear drum brake return springs. Make it easy to handle with our hands.
- -Great Value- The tool for shoe brakes has a hook in the middle which is used to engage the J-eye of a spring. Simply hook the spring loop, and then press down against the axle.
- -Color- Black 5081.
- -12 Months Warranty-
- OTC S-Cam Brake Slack Adjuster Tool
- Enables you to quickly check the brake adjustment on class 7 or 8 trucks and trailers equipped with S-cam brakes
- Features a sturdy four-position handle to provide the leverage you need at the proper angle
- Works on manual or automatic slack adjusters
- Crafted from high-grade materials to ensure quality performance over the lifetime of the tool
- 【GREAT COMPATIBILITY】-- This brake return spring tool fit for large trucks and trailers with air brakes with S cam design. Use for install and remove return springs on commercial truck and trailer.
- 【WIDE APPLICATION】The Spring Tech Tool compatible with s-cam return spring. If is s-cam brake type, the Truck Brake Spring Tool works on the return spring install/uninstall.
- 【EXCELLENT FUNCTION】-- Provides leverage to back out brake shoe and remove roller cam. The tool can cups the return spring to prevent it from sliding off and possible injury. The end with unique slight bend design to make it fit better and not slip as easily.
- 【EASY TO USE】-- Safely, quickly and easily remove and install the return spring. Slide the Brake Return Spring Tool between the shoe webs over the top roller and hook the top of the return spring below the coil. Push down on the handle and unhook the spring from the pin by pulling back or pushing forward on the handle depending on the direction of the spring opening.
- 【SUPERIOR QUALITY】-- Made of high quality steel, will no deformation and not break. surface black coated to ensure resistance to corrosion and rust, protection and years of trouble-free use. Non-slip, extra long handle provides excellent stability.
- Safely work and replace brake shoes on heavy-duty tractors and trailers.
- The tool has a little hook that engages the spring at the J eye on the end, and the bar goes under the axle to leverage the spring out of position.
- The tool is used on the 2 springs on the side of the shoe and it can in close proximity to the brake chambers or suspension. Simply hook the retaining spring loop and press down against the axle. Lever action against the axle makes the job a snap.
- Made of high quality carbon steel, have a unparalleled long lifespan with great durability.
- Package: 1*S-Cam Spring Tool. Having any questions, contact to us and got an ideal reply. With a 180 days warranty. Thank you.
- [Function]: This tool is used to install and remove return springs in commercial truck and trailer applications.
- [Fitment]: For s-cam return spring, if is s-cam brake type, it works on the return spring install/uninstall.
- [Features]: Unique design cups the return spring to stop it from sliding off and possible injury, fast, safe, and easy way to remove and replace return springs. The slight bend at the end makes it fit better and not slip as easily.
- [Material]: Tool is carefully forged from the finest alloy steels for a long service life. Easy to use and reduce your maintenance costs, extra-long handle provides exceptional stability.
- [How to use]: Slide the Spring Tech Tool between the laces over the top roller and hook the top of the return spring under the coil. Press the handle down, and depending on which direction the spring opens, pull back or push the handle forward to unhook the spring from the pin.
Last update on 2024-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.