NHTSA ID Number: 10093965
Manufacturer Communication Number: SMB162
SERVICE MANUAL BULLETIN PROVIDES REVISED INFORMATION ON PRESSURE RELIEF DEVICE (PRD) - ACTIVATION TEMPERATURE.
1 Affected Product
|NEW FLYER||NEW FLYER||9999|
ISSUE DATE: Sep 22 2016
Pressure Relief Device (PRD) - Activation
This bulletin identifies the activation temperature for Pressure Relief Devices (PRD) manufactured by OMB, P/N 554507 on your New Flyer Vehicle.
This PRD will activate when the temperature rises above the eutectic ring melting temperature of 230 °F (110 °C).
This information supersedes any prior information on this subject already provided in your New Flyer Manuals. Make this Service Bulletin available to service personnel to inform them of changed information and procedures.
- ✪【High Quality】TOP quality Fuel Rail Pressure Regulator Sensor,made of premium quality for strong stability,which will built to long lasting durability.This sensor is well made and is a breeze to install. Save you much time and money by replacing the fuel parts yourself and resolve the fuel problem in your precious vehicle.
- ✪【Powerful Function】Driving anywhere depends on smooth and efficient operation of Fuel System, especially the Fuel Pressure Sensor. With this item, you can get rid of troubles such as "Check Engine Light ON; Difficulty Starting Engine, Weak Acceleration, Stalling and Bad Fuel Mileage". Fuel rail pressure sensor will restore the performance of your fuel delivery system for storing and delivering the gasoline or diesel fuel your engine needs to run.
- ✪【Reference OE Part Number】Replace Part Number: Fuel rail pressure sensor 3R3E9F972AA / 3R3E-9F972-AA / FPS7 / F8CZ9F972BE / XW4Z9F972BA / F8CF9F972BG / 3R3Z9F972AB.
- ✪【Fitment】Fits Ford Lincoln Mercury Vehicles with 2.0 2.3 3.0 3.8 3.9 4.6 5.4 Liter V6 V8 L4 Engine, for 2004-2005 Ford Explorer, for 2003-2004 Ford Crown Victoria, for 2004-2008 Ford F150, for 2000-2004 Ford Focus, for 2005-2006 Ford E150 Club Wagon E250 GT, 2002-2007 Ford Taurus Thunderbird.
- ✪【OEM Design Direct Fit】Replacement Fuel Rail Pressure Regulator Sensor 3R3E-9F972-AA constructed of premium material for long lasting durability and reliability. Worked as good as the original. Even though this is not a genuine Ford or Motorcraft original equipment fuel pressure sensor, but it works even better and lasts longer at a much lower price.
- Helps protect RV plumbing and hoses from high pressure city water
- Attaches easily with 3/4" garden hose threads
- Durable brass construction that is drinking water safe
- Reduces water pressure to a safe and consistent 40 50 pounds of pressure
- CSA low lead content certified. Complies with California's AB1953 and Vermont Act 193, Maryland HB 372, and Louisiana HB 471 low lead content laws
- 50332 for presto canner parts
- 50332 Canner Pressure Regulator Fits Presto Pressure Canner models: 01/C22, 01/C17, 01/C13, 171003, 174001, 171001, 171002, 0174510, 177001, 02/CAA12H, 02/CAA16H, 02/CAA20H
- Pressure Cooker Pressure Regulator 3 Piece. Adjustable to make 5-10-15lb weight
- For low-acid canning (vegetables, meat, poultry, seafood), use 10 pounds of pressure for altitudes up to 1,000 feet. For altitudes above 1,000 feet, use 15 pounds pressure. For high-acid canning (fruits), use 5 pounds of pressure for altitudes up to 1,000 feet. For altitudes above 1,000 feet, use 10 pounds pressure.
- Plce the 3-pice pressure regulator on the vent pipe after the 10-minute venting perod is complete. Proessing time begins once the pressure regutator egins to tock gently. Adjust heat to maintain a slow, steady rocking motion during the processing time.
- [Safety and Healthy]: Made of Lead Free Brass, our regulator meets NSF lead-free requirements of less than 0.25%.Our water pressure regulator can reduce original water pressure and make it stable to use.
- [Compatibility]: Compatible with U.S. 3/4" water sources(ND20) & NH threads, the regulator can compatible with all U.S. water sources.
- [Durability]: Built in oil design can damps vibrations of internal parts or sudden pressure changes and to prolong lifespan of gauge.
- [Adjustment]: Through screw driver, the water pressure can be adjusted from 0-160psi easily (Maximum tolerable water pressure: 240psi). Just adjust the brass screw (at the top of regulator) to change the pressure - or +. Arrives with our easy installation guide.
- [Easy to clean]: The removable valve spool is easy to clean or replace.Double-layer inlet screened filter design will filter the particles like gravel, debris to prevent impurity blocking and valve body damage.
- 2016 Improved Version. We have upgraded our brass regulator after examining other reviews; Our new lead-free regulator contains a more durable pressure gauge with oil to prevent friction of internal components, particularly low lead content, well under the lead free requirement, and comes with a 1 Year WARRANTY.
- Lead Free. This regulator was modified to contain lowest amount of lead of any regulator on the market. Each batch of regulators is tested to contain less than .13% lead, well under the NSF lead-free requirements of .25%. Email us for a copy of our testing certification.
- Regulator gauge contains oil to reduce friction of internal components and greatly increases the life of the product.
- Compatible with all U.S. water sources, including 3/4" garden hose threads and NH threads. Contact us for any compatibility questions by clicking on our store name, "Cartlee", and clicking on the ask a question button.
- Adjustable up to 160 PSI. Arrives with easy installation guide. Email us for an additional copy of the guide or quality control test.
- GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column
- PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in the picture’s table.
- CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer to the pictures before buying.
- MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column.
- OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
- 【Measure Your Pressure】Use the pressure gauge to determine and regulate your propane PSI. Measuring from 0-60 psi (as well as 1-4 100xKPA), the Pressure Gauge lets users control their heat with a precise level of accuracy.
- 【End Fitting to Appliance】12Foot 0-30 PSI High pressure stainless steel hose, 3/8” female flare fitting,fit for gas grills, gas stoves, turkey fryers, burners, smokers, cooker, fire pit and heater, hot water heater, as long as your appliance connection is 3/8’’ male flare connector.
- 【New upgrade】Black part fitting is POL connector, you can directly connect your 40 Pound propane tank to 100 Pound, Don't need to move your atmospheric bottle. Gas Pressure Gauge allow you control of the heat output with a precise level, to keep your outdoor cooker in optimal operating condition.
- 【Durable Material Design】The propane hose body is made of stainless steel it can effectively reduce damage caused by friction and animal bites. Defeat ordinary rubber that ages in the sun, provides secure, airtight connection between grill and turkey fryer or burner and tank.
- 【SAFETY】Pass CSA certificate for your safety, excellent sealing quality is promised for your safety. propane regulator and hose has excess flow protection and will automatically shut off, easy to install your propane bottle and propane appliance.
- Lowers incoming water pressure from a water source and filters out particulates for optimal performance of your drip system; Connects to pipe commonly used in underground valve systems
- Attach the pressure-regulating filter to pipe with a ¾ in. MPT connection point; Use with a ¾ in. FPT Swivel Adapter to connect supply tubing
- Attach the pressure-regulating filter to pipe with a ¾ in. MPT connection point; Periodically flush out the system by removing the flush cap, also known as a cleanout cap, and running the water; the filter can also be removed from the middle housing and pulled out to clean
- Regulates water pressure from water source; preset at 30 PSI, ideal for most drip irrigation systems; 200-mesh filter washer blocks particles in the water from clogging emitters; filter is removable for cleaning and maintenance; Filter can be flushed out by removing the flush cap or cleanout cap and running water through; also can be removed from the middle housing to clean
- Maintain steady stream of compressed air with clearly visible control gauge for easy setting and air flow control with the use of Le Lematec AR-02 air compressor regulator with gauge.
- Le Lematec AR-02 Diaphragm type Air Flow Regulator provides precise air flow control. Suitable for ¼-inch inlet and outlet configuration, and can measure pressure of 0-140PSI,0-10 BAR.
- AR-02 air flow regulator offers a wide variety of applications. Perfect compressed air accessory for air tools such as spray guns, sandblasters, plasma cutters, HVLP guns and other air tools.
- Le Lematec AR-02 air flow regulator is impact and solvent-resistant designed to withstand tough applications. With metal and glass gauge for easy setting. Ideal for any compressed air operations.
- Lightweight and saves space. Weighing only 0.35 kilograms, AR-02 air regulator is lightweight with compact design without taking up space and add weight on air tools when in use.
- Ideal for installations requiring lower flows such as solid set, drip line, soaker hose and other low pressure agriculture, residential and commercial irrigation. This PRLG (Pressure Regulator Landscape Grade) maintains a constant outlet pressure of 25 PSI (1.72 bar) with a flow range between 0.5 - 7 GPM (114 - 1590 L/hr).
- 100% water tested for accuracy. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance.
- Proper use of this low flow water regulator maintains sprinkler or droplet flow, distribution uniformity, and the overall efficiency of an irrigation system. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery. Works with any standard 3/4" outdoor faucet, hose bib, garden hose, water hose, sprinkler manifold, garden soaker hose or home irrigation system.
- Made in the USA of engineering-grade thermoplastics. This sturdy inline plastic water regulator can be installed above or below ground. No external metal parts for excellent corrosion resistance.
- Note: This irrigation pressure regulator regulates dynamic water pressure (the pressure while water is flowing). If measuring this regulator with a pressure gauge, do not screw the gauge directly onto the end of the regulator. This blocks the flow of water and measures static pressure, not dynamic pressure. To measure dynamic water pressure, attach a gauge at the end of your irrigation tubing line, or use an inline gauge that allows water to flow unblocked through the regulator.
Last update on 2021-10-20 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2021-10-20 / Affiliate links / Images from Amazon Product Advertising API