“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10110610
Manufacturer Communication Number: SMB128
Summary
Service Manual Bulletin – Door Sensitive Edge Preventive Maintenance & Functional Test
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
NEW FLYER | NEW FLYER | 9999 |
SMB-128
ISSUE DATE: Sep 13 2013
Door Sensitive Edge Preventive Maintenance & Functional Test
16 – Entrance & Exit Doors
This bulletin provides revised information on testing the sensitive edges located on the exit door as installed on your New Flyer vehicle.
This information supersedes any prior information on this subject already provided in your New Flyer Manuals. Make this Service Bulletin available to service personnel to inform them of changed information.
SEOCONTENT-STARTSMB-128 Copyright © 2013 New Flyer Industries Canada ULC Cover
SERVICE MANUAL BULLETIN
This Service Manual Bulletin is prepared by the Publications Department of New Flyer Industries
Canada ULC. Refer to details below.
ISSUE DATE: Sep 13 2013
SMB-128
APPLICABILITY
VEHICLE LENGTH ???? 30ft. ???? 35ft. ???? 40ft. ???? 60ft. ???? ALL
VEHICLE TYPE ???? High Floor ???? Low Floor ???? Invero ???? Xcelsior ???? ALL
FUEL TYPE
???? Diesel ???? Electric ???? CNG ???? LNG
???? ALL
???? Diesel/Electric ???? Gas/Electric ???? Fuel Cell
SUBJECT Door Sensitive Edge Preventive Maintenance & Functional Test
SECTION TITLE 16 – Entrance & Exit Doors
DETAILS This bulletin provides revised information on testing the sensitive edges
located on the exit door as installed on your New Flyer vehicle.
This information supersedes any prior information on this subject
already provided in your New Flyer Manuals. Make this Service Bulletin
available to service personnel to inform them of changed information.
SMB-128 Copyright © 2013 New Flyer Industries Canada ULC 1 of 1
SERVICE MANUAL BULLETIN
SMB-128
1. Door Sensitive Edge
Inspection & Test
1.1. Preventive Maintenance
Inspect and test the door sensitive edge
function daily and perform a complete
inspection every year or 100,000 miles
(160,000 km), whichever occurs first. Visually
inspect door sensitive edge for cuts,
tears, or other damage. Replace sensitive
edge if damaged.
❒ Inspect for properly connected tubing from
sensitive edge to pressure wave switch.
❒ Inspect electrical connections on pressure
wave switch.
❒ Perform a functional test on the sensitive
edge system as outlined in the following
Functional Test procedure
1.2. Functional Test
1. Ensure that the system is at full air pressure,
the vehicle is parked and the parking
brake is set
2. Open the doors to be checked.
3. Set the doors to close.
4. Standing outside the bus and while the
doors are closing, firmly pinch the sensitive
edge seal on the left hand door panel. The
doors should reopen. See “Fig. 1: Pinch
Test.
5. Repeat steps 3 and 4 for the right hand
door panel.
6. Standing outside the bus with the door
closing, hold a 1 inch diameter rod (hardwood
or metal approx. 18 in. (45.72 cm)
long) perpendicular to the side of the bus
at the vertical centerline of the door opening,
12 inches above the bottom of the
door panels. See “Fig. 2: Rod Test.
7. The doors should reopen when the door
edges contact the rod.
8. Repeat steps 6 and 7 two more times. First
with the rod held at the mid point of the
door opening and again with the rod held
at a point 12 inches below the top of the
door panels.
9. If the doors open when tested according to
steps 4 through 8, the sensitive edge system
is working properly.
10.IIf the doors fail to open at any testing step,
this may indicate a problem with a component
of the sensitive edge system (sensitive
edge seals, pressure wave switches,
tubing or connection point). Verify proper
operation of these components and then
repeat this test procedure.
Fig. 1: Pinch Test
Fig. 2: Rod Test
s0915306a.svg
s0915307a.svg
SMB128
https://www.nhtsa.gov/recalls?nhtsaId=10110610
https://static.nhtsa.gov/odi/tsbs/2013/MC-10110610-9999.pdf
“This site contains affiliate links for which OEMDTC may be compensated” |
- Ideal for metal-to-metal applications that require heavy-duty lubrication and protection against rust and corrosion
- Sprays on evenly as a liquid and sets dry with a thick, protective coating that won't run off. Safe from 0° F to 300° F for unbeatable protection
- Perfect for auto hinges, gears, sprockets, latches, door tracks, pulleys, cables, and more
- Excellent for lubricating equipment before placing in storage, and is 50-state VOC compliant
- WD-40 Brand believes in creating high-quality products that will not fail in extreme conditions. Professionals rely on WD-40 Specialist to get the job done right
- Ideal for metal-to-metal applications that require heavy-duty lubrication and protection against rust and corrosion
- Sprays on evenly as a liquid and sets dry with a thick, protective coating that won't run off. Safe from 0° F to 300° F for unbeatable protection
- Perfect for auto hinges, gears, sprockets, latches, door tracks, pulleys, cables, and more
- Excellent for lubricating equipment before placing in storage, and is 50-state VOC compliant
- WD-40 Brand believes in creating high-quality products that will not fail in extreme conditions. Professionals rely on WD-40 Specialist to get the job done right
- MULTI-PURPOSE: Ideal for many applications in automotive; shop; and home
- LONG LASTING: Lithium-based grease delivers corrosion protection and a long grease life
- UNIQUE FORMULA: This spray lubricant is water-resistant; heat resistant; and contains advanced additives to deliver high film strength
- APPLICATIONS: Hinges; latches; overhead door tracks; open gears; chains; cables; slide conveyors; guide rails; cams; pistons; machinery; tools; & equipment
- CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain; protect and repair different marine; heavy-duty motor vehicles; industrial-grade engines; household tools and electrical equipment.
- Protects Against Moisture and Oxidation
- Leaves a Thick Layer of Grease
- Keep Surfaces Lubricated in Extreme Temperatures
- Keep Surfaces Lubricated in Extreme Temperatures
- Protects Against Moisture and Oxidation
- Leaves a Thick Layer of Grease
- Clean, low-odor lithium complex formula
- Enhanced with Teflon for optimal performance
- Resists washing off, melting, freezing and extreme heat
- Appropriate for outdoor use
- Ideal for metal-to-metal applications that require heavy-duty lubrication and protection against rust and corrosion
- Sprays on evenly as a liquid and sets dry for a thick, protective coating that won't run off. Safe from 0° F to 300° F for unbeatable protection
- Sprays on easily with a thick, protective coating for auto hinges, gears, sprockets, latches, door tracks, pulleys, cables, and more
- Excellent for lubricating equipment before placing in storage, and is 50-state VOC compliant
- WD-40 Company has been around for 65 years and has never stopped their innovative mindset. The WD-40 Specialist product line has been refined to perfection so you get the results you need with ease
- WhiteLith Is An Lithium Thickened Light Duty Grease That Prevents Rust And Corrosion
- An Excellent Choice Anywhere A Non-Staining General EP Grease Is Required
- Useful For Greasing Automotive Doors, Bicycle Parts, Household Doors, Garage Doors & Overhead Tracks
- Additional Applications Of Water Pumps, Universal Joints And Chassis Points, Cars, Farm Tractors, Construction Equipment And Trucks
- A Great Solution To Fix a Squeak In Door Hinges, Latches and Most Motorcycle Springs, Tools And Much More!
- Price For: Each Base Oil: Mineral Item: Multipurpose Grease Lubricant NSF Rating: Not Rated NLGI Grade: 2 Grease Thickener: Lithium Grease Container: Aerosol Can Grease Color: White Flash Point: 200 Degrees F Specific Gravity: 0.80 Container Size: 10.25 oz. Country of Origin (subject to change): United States
- Everything you need in a garage door lubricant: High performance and fast drying. Select a wide or narrow spray for fast, easy application
- Lubricate and protect metal between moving parts on garage doors to keep them moving and free from corrosion
- Quick drying, non-sticky application ensures your parts don't attract dirt and other contaminants over time
- Professional grade formula designed to keep even the heavy duty commercial garage doors operating smoothly
- Use on all moving parts of a garage door - hinges, tracks, chains, pulleys, rollers, and more
Last update on 2024-06-16 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.