| “This site contains affiliate links for which OEMDTC may be compensated” |
April 21, 2020 NHTSA CAMPAIGN NUMBER: 20V225000
Battery Fuse Holder Improperly Mounted
An electrical short circuit can increase the risk of a fire.
NHTSA Campaign Number: 20V225
Manufacturer Altec Industries Inc.
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 92
Summary
Altec Industries Inc. (Altec) is recalling certain 2017-2020 ST Spray Trucks. The battery fuse holder may have been improperly mounted, potentially causing an electrical short circuit.
Remedy
Altec will notify owners and will install a new battery fuse holder, free of charge. The recall is expected to begin June 16, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec’s number for this recall is CSN 758.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
This notice applies to your vehicle. See attached serial number list
NHTSA Safety Recall
No. 20V-225
May 28, 2020
Dear Altec Owner,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act, and Canada Motor Vehicle Safety Act.
Altec Industries, Inc. has decided that a defect which relates to motor vehicle safety exists in certain ST500-G, ST550-SS, ST600-G, ST600-GL, ST720-SS, ST750-SS, and ST900-SS Spray Equipment Units. These units possibly have a battery fuse holder that was not properly secured. An improperly secured fuse holder can contact a ground and either blow the fuse or short circuit the battery with an increased risk of fire.
Refer to CSN 758 for the items covered under the warranty policy. Altec will supply, free of charge, a battery fuse holder kit to correct this condition.
In order to determine if your unit is affected by CSN 758, compare the serial number of your unit with the list of affected units attached to the CSN. The repair can be performed by the customer or you may contact Altec at 1-877-GO-ALTEC (1-877-462-5832) for further assistance. The repair is expected to take 45 minutes to complete.
At any time, you may contact Altec at 1-877 GO ALTEC (1-877-462-5832) with your unit’s serial number to determine if there are any other outstanding notices.
For US owners: after contacting Altec, if you are still not able to have the safety condition remedied without charge and within a reasonable time, you may submit a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590 or call toll-free 1-888-327-4236 (TTY: 1-800-424-9153) or go to https://www.safercar.gov.
For Canadian Owners: if you are still not able to have the safety condition remedied by your dealer within a reasonable time, please contact Altec Customer Service at 1-877-GO-ALTEC (1-877-462-5832).
If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. If you have sold or retired the unit please call Altec at 1-877-GO-ALTEC (1-877-462-5832) so the records may be changed.
If you have leased this equipment to another person or company, you are required by Federal Law to forward a copy of this notice to the lessee by first class mail within ten (10) days of the receipt of this notice.
We are sorry to cause this inconvenience; however we are taking this action in the interest of your safety and continued satisfaction with Altec products.
Thank you for your immediate attention on this important matter.
CSN 758
Customer Service Notice
May 28, 2020
Units Affected: ST500-G, ST550-SS, ST600-G, ST600-GL, ST720-SS, ST750-SS, and
ST900-SS Spray Equipment built from October 2017 through January 2020 (see attached list)
Battery Fuse Holder Replacement
Altec is committed to providing our customers safe and reliable products from initial delivery throughout the useful life of the machine.
Altec has discovered that the battery fuse holder was not properly secured on the affected units. This can allow the recessed terminals on the back of the fuse holder to contact a ground and either blow the fuse or short circuit the battery with an increased risk of fire.
Altec has designed service kits for the affected chassis models to secure the battery fuse and prevent the potential electrical issues. Altec requires that the appropriate kit be installed on each unit no later than the next regular maintenance interval or 90 days from the receipt of this CSN, whichever comes first. Select the appropriate service kit from the list below and call 1-877-GO ALTEC (1-877-462-5832) to order the kit.
| Chassis | Kit Part Number |
| Isuzu NPR | 991082809 |
| Isuzu NRR with PTO controls | 991082810 |
| Isuzu NRR without PTO controls | 991082813 |
| HINO 258ALP | 991082850 |
This repair is covered under the Altec Warranty Policy and can be performed by Altec, the customer, or the customer’s warranty provider. Altec will perform the repair for free at an Altec facility. If the customer, or the customer’s warranty provider performs the repair, a warranty claim must be submitted to be reimbursed for the cost of the parts and/or labor. Altec will allow up to $67.50 for the labor to perform this repair. There is no warranty reimbursement for the inspection. Call 1-877-GO ALTEC (1-877-462-5832) to schedule the work to be done by an Altec service technician. Customers are responsible for the travel costs of an Altec Mobile Service technician if the technician performs the inspection or repair at the owner’s location.
| Altec Use Only | |
| Inspection labor | 0.0 hr |
| Repair labor | 0.75 hr |
| Account # | 010.1690.43151.852.000.000 |
| Travel | Not Included |
| NHTSA code | 11 |
| Prime fail P/N | 059640035 |
| Doc ref | 074900716, 074900717, 074900718, 074900719 |
| Parts Kit | Part Number | Qty | Warranty |
| Fuse Relocation Kit, Isuzu NPR | 991082809 | 1 | Yes |
| Fuse Relocation Kit, Isuzu NRR w/ PTO Controls | 991082810 | 1 | Yes |
| Fuse Relocation Kit, Isuzu NRR w/o PTO Controls | 991082813 | 1 | Yes |
| Fuse Relocation Kit, Hino 258ALP | 991082850 | 1 | Yes |
4 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| ALTEC | ST SPRAY TRUCK | 2017-2020 |
6 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-20V225-9947.pdf 253.869KB
Loading...
Reload document 
Open in new tab
Recall Quarterly Report #1, 2020-2
RCLQRT-20V225-6506.PDF 211.131KB
Loading...
Defect Notice 573 Report
RCLRPT-20V225-1847.PDF 212.572KB
Loading...
Recall Acknowledgement
RCAK-20V225-1368.pdf 245.279KB
Loading...
Recall Quarterly Report #2, 2020-3
RCLQRT-20V225-8399.PDF 211.232KB
Loading...
Recall Quarterly Report #3, 2020-4
RCLQRT-20V225-9675.PDF 211.32KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V225&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
- SAFETY PROTECTION: Heavy duty 14 gauge (AWG) red color wire, great look and added protection to the circuit
- SUITABLE FUSES: Fits for 1A, 2A, 3A, 4A, 5A, 7. 5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse of 19. 1 × 18. 5 × 5. 1 mm
- WATER RESISTANCE: Tight-fitting waterproof lid, great damp-proof and waterproof performance, this item is safe and reliable
- PREMIUM QUALITY: High-quality materials ensure good bending performance, melting resistance and excellent electrical conductivity
- PACKAGE INCLUDE: 10 x 14AWG ATC/ATO Inline Fuse Holder
- Standard Blade Fuse: 0. 75 x0. 74 x0. 3 Inch. Fuse Type: Blade. Material: Zn alloy/Plastic. Protect your car and your electrical device from short circuit, overload etc.Material:plastic
- 10 Pack In-Line Fuse Holder: Heavy duty 14 gauge (AWG) red color wire, great look and added protection to the circuit.
- Safety Protection: Unique design of the dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is an inline fuse holder extremely safe and reliable. Easy to use: Turn one fuse slot into two while providing protection for both circuits
- Suitable Fuses: Fits for 1A, 2A, 3A, 4A, 5A, 7. 5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse of 19. 1 × 18. 5 × 5. 1 mm
- [Package Include]: 10 x 14AWG ATC/ATO Inline Fuse Holder and 120 pcs standard blade fuse Puller. 2 Year Warranty by Nilight.
- Heavy duty 12AWG wire, better protection to the circuit.
- Wire length: 8.7 inches 12 gauge wire each side, Fuse holder dimension: 41x35x15mm
- Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse.
- The rubber cap fits on tightly to protect any standard blade fuse inside.
- Package included 5 x fuse holder & 5 x 30A blade fuse.
- [ PROTECTION CIRCUIT ]: The fuse holder as isolation from the outside world, thus protecting the circuit from running safely.
- [ LONG SERVICE LIFE ]: Made of copper wire, soft and easy to bend, good electrical conductivity, more durable, and greatly extend the service life.
- [ WHAT WILL YOU GET ]: You will get 5 pack fuse holders and 60 pcs standard blade fuses (5 each for 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 35A, 40A, 50A).
- [ WIDELY USED ]: Circuit protection can be added to your system of interest. Suitable for cars, trucks, RVs, jeeps, boats, etc. Supports ATC/ATO standard blade fuses of 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 35A, 40A, 50A.
- [ WATERPROOF DESIGN ]: The inline fuse holder has a cap to protect the fuse inside, and it can effectively prevent dust, moisture and water.
- Heavy duty 10 (AWG) Gauge red color wire Allow you to splice it into any project.
- Inline fuse holder for ATC/ATO blade fuse.
- Package included 4 x fuse holder and 4 x 40Amp fuse.
- Water resistant, This fuse holder comes with cap to seal out moisture.
- Fuse holder dimension (42x35x13mm),Support up to 40A Standard fuses for 12V.
- 𝐖𝐈𝐃𝐄 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍: RED WOLF 4 way circuit fuse block widely used in Car, Truck, Boat, Tankers, Marine, Suv, Yacht, Rv, Van, Ships etc. Each fuse can be connected to any electrical circuits like ceiling lights, headlights, fog lights, tail lights, rocker switch, toggle switch, etc.
- 𝐒𝐄𝐂𝐔𝐑𝐈𝐓𝐘 𝐅𝐔𝐒𝐄: It is prevent damage to Auto RC Boat Marine Yacht SUV Vehicles equipment from current overload. And The role of ATC/ATO fuses is to protect any vital wiring of your equipment from being burned.
- 𝐏𝐑𝐎𝐅𝐄𝐒𝐒𝐈𝐎𝐍𝐀𝐋 𝐌𝐀𝐓𝐄𝐑𝐈𝐀𝐋: 4 way blade fuse block comes with 4 fuses (10A/15A/20A/30A) , which made of by tin-plating copper components, non-toxic and tasteless layer and excellent conductivity. Sturdy and robust construction with transparent cover for dust and moisture protection.
- 𝐄𝐚𝐬𝐲 𝐭𝐨 𝐢𝐧𝐬𝐭𝐚𝐥𝐥: Equipped with 2 screws to secured. RED WOLF 4 way blade fuse box is provide a multi-function stickers for DIY your specific needs, convenient for examination and repair. You can easily identify which device is wrong, which is definitely suitable for outdoor troubleshooting.
- 𝐏𝐀𝐂𝐊𝐀𝐆𝐄 𝐈𝐍𝐂𝐋𝐔𝐃𝐄𝐃: 4 Way ATC/ATO blade fuse block box w/4 fuses (10A/15A/20A/30A) Included.
- ATC/ATO Blade Fuse - The 12 AWG wire inline fuse holder 12v will come with additional ATC/ATO blade fuses for unexpected use, includes 6 x 20A, 6 x 30A and 6 x 40A fuses.
- Mounting Hole Design - There is a mounting hole on the cover of this automotive fuse holder, and each 12 volt fuse holder will come with a mounting screw for fixing the holder.
- Wire Design - The wires of these in line fuse holders 12v is tinned wires, which have better performance in corrosion and oxidation resistance compared with bare copper wires.
- Waterproof Design - The cover and silicone seal rings of the 12v inline fuse holder effectively enhances the waterproof performance of this waterproof fuse holder, makes it have better performance in marine use.
- Application - Due to the excellent waterproof performance and large capacity of the marine fuse holder, it can be used under a wider application range, such as car, truck, automotive, marine, boat, etc.
- ★【NEW DESIGN 6 WAY FUSE BOX】Electop 6-Way Blade Fuse Block accepts 1A to 20A ATC/ATO(middle size) fuses. It has positive and negative sides, which means that each positive terminal screw has a negative terminal screw to make your circuit clear at a glance. This device is intended for branch circuit protection and has good conductivity. Max. 32V DC operating voltage. Max. 20 Amp per circuit & 75 Amp per panel.
- ★【PREMIUM QUALITY & SAFE MATERIAL】Made of environment friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon.
- ★【PROTECTION COVER & PRE-PRINTED DIY STICKERS】Transparent plastic cover with screw nut, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. Come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor.
- ★【WIDE APPICATION】This 6 Circuit Fuse Block widely used in Car, Truck, Boat, Tankers, Marine, SUV, Yacht, RV, Van, Ships etc. Each fuse of fuses box can be connected to any circuit of electrical appliances. For example: car dome light, auto headlight, width lamp, fog lamp, warning lights, car refrigerator, car charger and car fan, car TV.etc.
- ★【PACKAGE INCLUDED】Package includes 1 x 6 Way Blade Fuse Block with Protection Cover, 4 x 20A Fuse, 2 x 15A Fuse, 2 x 10A Fuse, 4 x 5A Fuse, 4 x Screw, 2 x Sticker. If you have any questions about this 6-way fuse box holder, please feel free to contact us. Our costumer service team always be there for you.
- Package including: 10 pieces 16 AWG dust and moisture protection inline fuse holder with cover. Waterproofing IP65. Fit Boat Car Marine Electric Automotive Plug-in mini fuse.
- Wire Type: 300mm 16 AWG Wire. UL1015 16 Gauge wire, Tinned copper conductors, not CCA
- Support for ATM/APM type fuse: 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A. DC 12V 24V
- For safe electric protection, we produce metal sockets in our fuse holders tightly enough to hold blade fuses, so that fuses have no movement and no electric sparks in working. In this way, fuse holders reduce extra heat and avoid failures of work.
- Ingress Protection level 65,Tight-fitting waterproof lid, the rubber cap fits on tightly to protect fuses inside. Water tight, water resistance.
- Dual-slot Fuse Holder: Provides 1 fuse holder to protect existing circuits and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise
- Easy to use: plugs into occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting
- Great compatibility: Automotive and non-automotive use for Cars, Trucks, SUVs, ATVs, UTVs, Campers RVs,Motorcycles,Boats,snowmobiles,and most general DC applications etc,covering such components as radio, light,etc. Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box
- Superior quality: made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity
- Package include: 3pcs Standdard fuse tap,3pcs Mini fuse tap,3pcs Micro2 fuse tap,3pcs Low Profile mini fuse tap,12pcs blade fuses. 2 Year Warranty by Nilight.
Last update on 2024-03-22 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.