| “This site contains affiliate links for which OEMDTC may be compensated” |
March 6, 2020 NHTSA CAMPAIGN NUMBER: 20V136000
Improper Traction-Power Harnesses
Uncrimped or improperly crimped cable lugs can cause loss of drive power, increasing the risk of a crash. In addition, it can also cause localized high heat and arcing, increasing the risk of fire.
NHTSA Campaign Number: 20V136
Manufacturer Arcimoto Inc
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 66
Summary
Arcimoto Inc. (Arcimoto) is recalling certain 2019-2020 FUV motorcycles. The traction-power harnesses large-gauge cable-lugs may be uncrimped or improperly crimped.
Remedy
Arcimoto will notify owners and will replace the traction-power harnesses, free of charge. The recall began March 24, 2020. Owners may contact Arcimoto customer service at 1-541-683-6293.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
This notice applies to your vehicle: 7F7ATR31XXXXXXXXX
March XX, 2020
Safety Recall: Improper Traction-Power Harnesses
NHTSA Recall: 20V136
Dear <First name, Last name>:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Arcimoto has decided that a defect which relates to motor vehicle safety exists in certain 2019 and 2020 model year FUVs.
Why is your vehicle being recalled?
Your vehicle was manufactured with improperly crimped large-gauge cable-lugs on completed traction-power harnesses, which may cause loss of drive power, increasing the risk of a crash. In addition, it can also cause localized high heat and arcing, increasing the risk of fire.
What will we do?
A trained Arcimoto Service Technician will remedy the improper traction-power harnesses by replacing all of the traction-power harnesses. The replacement will be performed at no cost and can take up approximately six (6) hours to complete.
What should you do?
Contact Arcimoto to schedule a service appointment.
Do you have questions?
Do not hesitate to contact Arcimoto if you have any questions or concerns. Arcimoto main at 541-683-6293 or Arcimoto Service and Product Support 541-780-0032.
If after contacting Arcimoto, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is 20V136.
We apologize for any inconvenience this recall may cause you.
Thank you for being an Arcimoto customer.
Sincerely,
Arcimoto, Inc.
Tel: (541) 683-6293
2034 W. 2nd Avenue, Eugene, OR 97402
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| ARCIMOTO | FUV | 2019-2020 |
11 Associated Documents
Recall Quarterly Report #1, 2020-1
RCLQRT-20V136-9917.PDF 211.115KB
Loading...
Reload document 
Open in new tab
Part 577 Owner Notification Envelope
Loading...
Recall 573 Report
RCLRPT-20V136-4860.PDF 215.192KB
Loading...
Recall 573 Report
RCLRPT-20V136-1564.PDF 215.198KB
Loading...
Recall 573 Report
RCLRPT-20V136-8574.PDF 215.837KB
Loading...
Recall Acknowledgement
RCAK-20V136-4885.pdf 244.874KB
Loading...
Owner Notification Letter(Part 577)
RCONL-20V136-0202.pdf 98.838KB
Loading...
Recall Quarterly Report #2, 2020-2
RCLQRT-20V136-3758.PDF 211.216KB
Loading...
Defect Notice 573 Report
RCLRPT-20V136-9341.PDF 215.203KB
Loading...
Recall Quarterly Report #4, 2020-4
RCLQRT-20V136-5971.PDF 211.411KB
Loading...
Recall Quarterly Report #3, 2020-3
RCLQRT-20V136-3852.PDF 211.303KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V136&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
- High temp Wire Harness Automotive Cloth Tape with excellent sound and rattle dampening performance. Lessens coil whining and lasts well against elevated temperatures (-40℉ - 257℉).
- Sports a race-spec heavy-duty bundling performance but cleanly tears with just bare hands, EMPOWERING average car owners with LITTLE TO NO EXPERIENCE in automotive maintenance to achieve PROFESSIONAL-GRADE results in function and form.
- This Wire Loom Tape features an extremely strong adhesive but does not turn into a messy goo. Rated to last up to 6 years and can easily get you through 150k miles of mileage.
- Its bi-directional weave makes it puncture-resistant and abrasion and corrosion-resistant. This automotive felt tape preserves cables in their pristine condition.
- This engine tape wrap is similar, if not better, in thickness, tensile strength and looks with OEM wire harness tapes. Extra-sticky adhesive enables users to bundle hard-to-reach cables quickly.
- Widely application: The material of wire harness cloth tape is soft and corrosion-resistant, which is suitable for the use of wire harness in automobile interior noise reduction part, such as wire harness of the dashboard, main harness wound and applied for wire joint and wire fixing. It can also sort out home appliance wiring and more.
- Easy to tear. Just stick one end of tape to cable, start pulling and wrapping onto the cable and tear it gently. No need scissors and other tools. You can decide the length of the wire cloth tape according to you needs.
- Professional cloth tape material: It is made of polyester non-woven fabric and strong acrylic pressure sensitive adhesive. High viscosity, high temperature resistance ( -40°F ~ 221°F ), well seal and excellent flexibility.
- Excellent performance: The wiring harness tape maintains features high adhesive force, good noise reduction, hand tearable and heat insulation performance, and wear resistance. It is suitable for electrical automotive engine and circuit maintenance to achieve the purpose of insulation protection.
- Specification: A set of 5 rolls wire harness cloth tap. SIZE: Each roll black electrical harness tape is 50 FT long and 3/4 inch wide. It is work for your different daily needs in diversified use scenarios.
- Harness Cloth Tape Application: Suitable for the use of internal wiring harness of automobiles and can reduce the noise. Such as the wire harness of the dashboard.
- Harness Cloth Tape Material: These wiring harness tape are made of high quality cotton flannel and strong adhesive glue.
- Harness Cloth Tape Features: 1High Adhesive Force 2 Noise Resistance Well 3 Strong Abrasion Resistance 4 Hand Tearable 5 Strong Chemical Resistance.
- Harness Cloth Tape Size: Length 15 m, Width 15 mm.
- Car harness cloth tape is very convenient to use; just wrap the tape around the wire and gently tear it apart. No scissors or other tools are needed. The length of the tape can be determined according to your needs.
- Wire Harness Cloth Tape Application: Automotive wire loom tape is widely used in the area near the engine, battery or on normal wire harness and also suitable for the use of wire harness in automobile interior noise reduction part, such as instrument panel harness. Wrap any wires that need to be repaired
- Temperature Resistance: Electrical wiring harness cloth tape made of high-quality polyester non-woven fabric and strong acrylic pressure sensitive adhesive, with high adhesive Force, abrasion resistance and high-temperature resistance (-40℉- 225℉)
- Easy to Tear: Oyviny automotive cloth tape is easy to tear and convenient to use, just wrap the harness cloth tape around the wiring harness and gently tear it apart, No tools required! You could tear the tape at any length according to your need
- Good Performance: Automotive wire loom harness cloth tape is wear-resistant and with strong anti-aging, which can be applied for a long time. It is also suitable for automotive circuit and engine maintenance to achieve the effect of insulation protection
- Harness Cloth Tape Size: Package comes with 5 rolls 25mm x 15m electrical wire harness tape. Each roll radio wiring harness cloth tape is 1 inch width and 50 feet length. The size and length is suitable for your daily use
- Safe material: the automotive wiring harness cloth tape is made of polyester non-woven fabric, quality pressure sensitive adhesive, no solvent residue, high viscosity, high temperature resistance; The material is soft and tough, please rest assured to use
- Wide range of uses: the material of wire harness automotive cloth tape is soft and corrosion-resistant, which is suitable for the use of wire harness in automobile interior noise reduction part, such as instrument panel harness and main harness wound; It can also be applied for wire joint and wire fixing
- Various sizes: a set of 24 rolls engine harness tapes, 1 inch/ 25 mm for each; The large size width of 1 inch can better meet your use needs; The 24 rolls are 1181.1 ft/ 360 meters in total, the sufficient length is suitable for your different daily needs in diversified use scenarios
- Perform well: the wire harness tape has good noise reduction and heat insulation performance, high temperature resistance and wear resistance, suitable for automotive engine and circuit maintenance to achieve the purpose of insulation protection
- Easy to use: the automotive cloth tape is convenient to use, just wrap the tape on the wire and tear it gently; No need scissors and other tools, you can decide the length of the tape according to your needs
- Enough to Use: you will get 2 rolls of wire harness tapes in the package, measuring approx. 2 inches x 49.2 ft/ 50 mm x 15 m for each; The proper size and sufficient length is suitable for your different daily needs in many use scenarios
- Safe Material: the wire harness tape is made of polyester non woven fabric material, quality pressure sensitive adhesive, high temperature and wear resistance, which can be applied for a long time
- Nice Performance: the adhesive fabric tape has nice noise reduction and heat insulation performance, very suitable for automotive engine and circuit maintenance to achieve the purpose of insulation protection
- Easy to Use: the wire loom tape is simple and convenient to use, just wrap the tape on the wire and tear it gently, and you can decide the length of the tape according to your own needs
- Scope of Usage: the cloth electrical tape is suitable for automobile interior noise reduction part, such as instrument panel harness and main harness wound, and can also be applied for wire joint and wire fixing
- Size : A set of 10 rolls cloth electrical tape, features 0.75 inch x 49 feet (width x length) each roll, is suitable for your different daily needs in diversified use scenarios.
- Quality Material : The cloth wire tape is made of polyester cloth base with strong acrylic pressure sensitive adhesive, have strong adhesive, can hold up well overtime and offer a strong grip. No hazardous substances, good flexibility.
- Performance : The wire harness tape features high adhesive force, noise resisitance well, strong abrasion protection, hand tearable, strong chemical restistance, high-temperature resistance, suitable for automotive engine and circuit maintenance to achieve the purpose of insulation protection.
- Easy to use : Stick one end of tape to cable, start pulling and wrapping onto the cable, make sure the thread pitch of wrap is not over than 0.2 inch ，No need for scissors, it can also be torn by hand ,a well done wrap can last more than 6 years.and can easily get you through 150k miles of mileage.
- Widely Application : Widely used in automobile, truck engine wiring harness, flexible wiring harness and all automotive-related applications, household appliances, electrical component wiring, motor wiring protection.
Last update on 2024-06-14 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.