“This site contains affiliate links for which OEMDTC may be compensated” |
February 13, 2020 NHTSA CAMPAIGN NUMBER: 20V085000
If the lug nuts loosen while the vehicle is in motion, the wheel may detach and become a road hazard, or there may be a loss of control of the trailer. Either scenario increases the risk of a crash.
NHTSA Campaign Number: 20V085
Manufacturer Vermeer Manufacturing Company
Components WHEELS
Potential Number of Units Affected 7,986
Summary
Vermeer Manufacturing Company (Vermeer) is recalling certain 2016-2020 BC1000XL, BC1200XL, BC1500, and AX19 brush chipper trailers. Incorrect lug nuts may have been installed, possibly resulting in the lug nuts loosening.
Remedy
Vermeer will notify owners and dealers will provide replacement 17.5 wheel/tire assembly, new wheel maintenance safety sign, tire specification placard, and supplemental operators and maintenance manual with wheel maintenance instructions, free of charge. Vermeer issued owners an interim notification on March 19, 2020. The recall began July 6, 2020. Owners may contact Vermeer customer service at 1-800-829-0051, extension 7060. Vermeer’s number for this recall is IK3922.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
SEOCONTENT-START
DUAL HORIZONTAL OFFSET FEED ROLLERS.
Improve performance by aggressively grabbing
and feeding material to the drum. The offset helps
the upper feed roller climb over big logs or
material with lots of branches and forks.
EASILY LIFTS HEAVY MATERIAL. An optional
winch allows operators to move large logs
effortlessly. The 150′ (45.7 m) winch line can
handle logs up to 2000 lb (907.2 kg) and can be
used to lift the log onto the feed table.
ELECTRONIC FUEL INJECTION ENGINE.
With improved fuel economy, the 135 horsepower
(101 kW) Power Solutions International (PSI)
engine allows for more effi cient working
conditions and boosts engine response under load.
A CLUTCHLESS PTO SYSTEM. Avoids
premature wear to the belt-drive system by
preventing high-speed engagement of the cutter
drum. The throttle is integrated with the belt drive
to help ensure the PTO can be engaged only while
the engine is at low speed.
EXTENDED WARRANTY. The 3-year/
3000-hour extended limited warranty on drum
housing, cutter drum, shaft and ring-fetter hubs
offers you peace of mind, in addition to the
1-year/1000-hour Vermeer equipment
limited warranty.
ECOIDLE™ ENGINE CONTROL SYSTEM.
When the EcoIdle function is selected by the
operator, the engine speed automatically lowers
to a preset rpm after 1 minute or 5 minutes of
inactivity to help reduce fuel consumption when
not chipping material. Due to this idling, noise and
greenhouse emissions are also reduced.
VERMEER.COM
GAS BRUSH CHIPPER
BC1200XL
EiC::~IIC>LE:™
Vermeer· y
EQUIPPED TO
DO MORE:
GENERAL
Length: 168″ (426.7 cm)
Width: 79″ (200.7 cm)
Height: 103″ (261.6 cm)
Weight (with winch): 6450 lb (2925.7 kg)
Weight: 5680 lb (2576.4 kg)
ENGINE
Make/Model: PSI 4.XL Electronic Fuel Injection
Horsepower: 135 hp (101 kW)
Max torque: 258 ft-lb (349.8 Nm) @1400 rpm
Fuel type: Gasoline
Number of cylinders: 6
Cooling medium: Liquid
CUTTING SYSTEM
Drum dimensions: 20″ diameter x 20″ wide (50.8 cm x 50.8 cm)
Drum speed: 2000 rpm
Knives: Two A8 chipper steel
Bedknife: Four usable edges
FEED SYSTEM
Chipping capacity (max): 13.3″ (33.8 cm)
Infeed opening height: 32″ (81.3 cm)
Infeed opening width: 52″ (132.1 cm)
Feed roller orientation: Dual horizontal offset
Feed table height: 32″ (81.3 cm)
Feed speed (max): 110 fpm
Feed roller dimensions (upper roller): 15″ (38.1 cm) diameter x
17″ (43.2 cm)
Feed roller dimensions (lower roller): 11.1″ (28.2 cm) diameter x
17″ (43.2 cm)
CAPACITIES/ELECTRICAL
Fuel tank: 25 gal (94.6 L)
Hydraulic tank: 12 gal (45.4 L)
System voltage: 12 V
Lights: LED brake, turn, tail, license, side indicators
CHASSIS/BRAKES
Frame: 7″ x .25″ (17.8 cm x .6 cm) Z-channel
Tires (option 1): ST235/80/R16 Load Range E
Tires (option 2): ST285/75/R16 Load Range E
Axle/Suspension: 7000 lb (3175.2 kg) rubber torsion
Electrical brakes with breakaway switch
BC1200XL GAS BRUSH CHIPPER
Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment
shown is for illustrative purposes only and may display optional accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer
logo, EcoIdle, Equipped to Do More and Vermeer Confidence Plus are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries. PSI is a trademark of Power Solutions International Inc.
© 2016 Vermeer Corporation. All Rights Reserved. Printed in the U.S.A. Please recycle.
PN 180007865
OPTIONS
Extended warranty
Special paint
Planned maintenance
Vermeer Confidence Plus® asset protection program
NOTES:
08/16.50
***************************************************************************
OFFSET HORIZONTAL FEED ROLLERS.
The offset horizontal feed rollers are designed to
efficiently take on oversized, branchy limbs.
ROBUST FEED TABLE. Mechanized feeding
is made convenient with a 28.9″ (72.4 cm)
feed roller opening and a durable, fixed infeed
table design.
SMARTCRUSH. Increase jobsite productivity
with the SmartCrush system that includes
intuitive hydraulic crushing capabilities to
minimize chainsaw work.
POWERFUL PERFORMANCE. Equipped with up
to 11,674 lb (5295.2 kg) of pull-in force, this unit
has optimized efficiency while working in tandem
with the patented SmartFeed system to increase
productivity when chipping large diameter logs.
OPERATOR CONTROL. The Tree Commander™
remote control comes standard with the AX19,
and an optional full-function remote is available.
The operator is able to control the functions
of the brush chipper remotely to improve
jobsite productivity.
OPTIONAL WINCH. The 150′ (45.7 m) winch line
has a pull-in force of 3250 lb (1474.2 kg), making
it easy to lift logs directly onto the feed table.
The winch boom can be removed and installed
conveniently with just six bolts. By removing the
winch boom, the operator can mechanically feed
the chipper more efficiently.
VERMEER.COM
BRUSH CHIPPER
AX19
Vermeer· y
EQUIPPED TO
DO MORE:
AX19 BRUSH CHIPPER
NOTES:
GENERAL
Length: 221″ (561.3 cm)
Height: 108″ (274.3 cm)
Width: 79″ (200.7 cm)
Weight (without winch and hydraulic jack): 11,200 lb (5080.3 kg)
Weight (with winch): 11,650 lb (5284.4 kg)
CAPACITIES/ELECTRICAL
Fuel tank: 40 gal (151.4 L)
Hydraulic tank: 20 gal (75.7 L)
Max hydraulic flow: 14.8 gpm (56 L/min)
DEF tank: 5 gal
Lights: LED front, rear, side, brake and taillights
CHASSIS/BRAKES
Frame: Z channel, 7.5″ x .25″ thick (19.1 cm x .64 cm)
Tires: LT285/75R16 load range E
Axle/suspension: Tandem torsion 7000 lb capacity (3175.1 kg)
Hitch: Pintle
CUTTING SYSTEM
Drum speed: 1100 rpm
Drum dimensions: 36″ (91.4 cm) diameter
Drum thickness: .5″ (1.3 cm)
Knives: 4 knives – 5.5″ x 10″ x .625″ (14 cm x 25.4 cm x 1.6 cm)
Shear bar: 4-sided – 3″ x 20.25″ x 1.25″ (7.6 cm x 51.4 cm x 3.2 cm)
Engagement system: Automotive style clutch
FEED SYSTEM
Chipping capacity: 19″ (48.3 cm)
Infeed opening height: 24″ (61 cm)
Infeed opening width: 28.9″ (73.4 cm)
Feed roller orientation: Horizontal
Feed table height: 35″ (88.9 cm)
Feed speed (max): 119 fpm (36.3 m/min)
Feed roller dimensions: 19″ dia x 28.25″ length (48.3 cm x 71.8 cm)
DISCHARGE SYSTEM
Discharge height: 108″ (274.3 cm)
Degree of rotation: 270°
ENGINE
Make/model: John Deere 4045HFC09
Gross horsepower: 173 hp (129 kW)
Max torque: 492 ft-lb (667.1 Nm)
Fuel type: Diesel
Number of cylinders: 4
OPTIONS
Special paint
Extended warranty
Preventive maintenance
Adjustable height discharge chute
Full function remote control
Manual outriggers
Hydraulic jack
Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is
for illustrative purposes only and may display optional accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped
to Do More and Tree Commander are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries. John Deere is a trademark of Deere & Company. © 2016 Vermeer Corporation. All Rights
Reserved. Printed in the U.S.A. Please recycle.
10/16.5k PN 180026148
*****************************************************************************************
CHIPPING PRODUCTIVITY. The SmartFeed
system monitors engine rpm and automatically
stops and reverses the feed rollers to enhance
production. This system also senses feed roller
jams and manipulates the material automatically
to reduce the need for manual control bar use.
EASILY LIFT HEAVY MATERIAL. An optional
winch allows operators to move large logs
effortlessly. The 150′ (45.7 m) winch line can
handle logs up to 2000 lb (907.2 kg) and can
automatically lift the logs onto the feed table.
OPERATOR SAFETY. Mounted over the feed
table, the four-position upper feed control bar
enables the operator to stop the feed rollers and
select forward/reverse. The patented bottom feed
stop bar is strategically located to make it possible
for an operator’s leg to strike the bar and shut
off the feed mechanism either intentionally or
automatically in an emergency situation.
TAKE CONTROL. With the optional Tree
Commander™ remote control, jobsite productivity is
improved by allowing the operator to control brush
chipper functions remotely. The remote can be
attached to the operator’s belt or held in an optional
bracket mounted directly to the operator’s station of
a Vermeer compact utility loader.
ECOIDLE™ ENGINE CONTROL SYSTEM.
When the Ecoldle function is selected by the
operator, the engine speed automatically lowers
to a preset rpm after one or fi ve minutes of
inactivity to help reduce fuel consumption when
not chipping material. Due to this idling, noise and
greenhouse emissions are also reduced.
SMOOTH FEEDING. Vertical feed rollers with
helical cleats help hold material fi rmly to the
infeed table, which reduces vibration, shock and
structural loading to the rear of the machine.
VERMEER.COM
BRUSH CHIPPER
BC1500
Vermeer· y
EQUIPPED TO
DO MORE:
Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation.
Equipment shown is for illustrative purposes only and may display optional accessories or components. Please contact your local Vermeer dealer for more information on machine specifications.
Vermeer, the Vermeer logo, Equipped to Do More, Tree Commander, Ecoldle and Vermeer Confidence Plus are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries.
Cummins is a trademark of Cummins Inc. John Deere is a trademark of Deere & Company. © 2017 Vermeer Corporation. All rights reserved. Printed in the U.S.A. Please recycle.
BC1500 BRUSH CHIPPER
PN 296431562
GENERAL
Length: 179″ (454.7 cm)
Height: 104″ (264.2 cm)
Width: 86″ (218.4 cm)
Weight (without winch): 7490 lb (3397.4 kg)
Weight (with winch): 7800 lbs (3538 kg)
CAPACITIES/ELECTRICAL
Fuel tank: 45 gal (170.3 L)
Max hydraulic flow: 5.5 gpm (20.8 L/min)
DEF tank: 5 gal (18.9 L)
Lights: LED front, rear, side, brake and taillights
CHASSIS/BRAKES
Frame: .25″ (6.4 mm) Z channel, 7″ (17.8 cm)
Tires: LT 285/75R16 LR E
Axle/Suspension: Torsion
CUTTING SYSTEM
Drum speed: 2208 rpm
Drum cutting diameter: 23.8″ (60.5 cm)
Drum thickness: .375″ (.95 cm)
Knives: 2 knives – .625″ x 5″ x 8″ (1.6 cm x 12.7 cm x 20.3 cm)
Engagement system: Automotive-style clutch
FEED SYSTEM
Chipping capacity: 15″ (38.1 cm)
Infeed opening height: 18.3″ (46.5 cm)
Infeed opening width: 15.8″ (40.1 cm)
Feed roller orientation: Vertical
Feed table height: 32″ (81.3 cm)
Max feed speed: 125 fpm (38.1 m/min)
Feed roller diameter: 21″ (53.3 cm)
DISCHARGE SYSTEM
Discharge height: 104″ (264.2 cm)
Degree of rotation: 270°
ENGINE OPTION ONE
Make/Model: Cummins QSF3.8L Tier 4 Final
Gross horsepower: 130 hp (97 kW)
Max torque: 360 ft-lb (488.1 Nm)
Fuel type: Diesel
Number of cylinders: 4
ENGINE OPTION TWO (INTERNATIONAL)
Make/Model: John Deere 4045H Tier 3
Gross horsepower: 125 hp (93 kW)
Max torque: 355 ft-lb (481.3 Nm)
Fuel type: Diesel
Number of cylinders: 4
OPTIONS
Tree Commander™ remote control
Extended warranty
Special paint
Planned maintenance
Vermeer Confidence Plus® asset protection program
Winch
Hydraulic chute rotate
01/18.2k
Contact your local Vermeer dealer for engine availability in your region.
***********************************************************************************
OPERATOR SAFETY. Combined with the
patented bottom feed stop bar is the four-position
upper feed control bar with dual stop positions and
forward/reverse feed positions. Mounted over the
feed table, it enables the operator to stop the feed
rollers and select forward or reverse operations.
Dual reset/hold-to-run buttons allow the operator
to readily reset the bottom feed stop bar.
ECOIDLE™ ENGINE CONTROL SYSTEM.
The EcoIdle engine control system can help aid in
noise reduction, as well as help consumer less fuel
if the feeding process has frequent interruptions.
SMARTFEED. The patented SmartFeed system
helps increase operator productivity while
reducing strain on vital engine parts.
The feedsensing control system monitors engine
rpm and automatically stops and reverses the
feed roller when feeding larger, hardwood material.
LARGE FEED OPENING. A large rectangular
12” x 17” (30.5 cm x 43.2 cm) feed opening helps
boost productivity by reducing the need to trim
material before feeding it into the chipper.
EXTENDED WARRANTY. The 3-year/3000-hour
extended limited warranty on drum housing, cutter
drum, shaft and hubs offers peace of mind,
in addition to the 1-year/1000-hour Vermeer
equipment limited warranty.
CLUTCHLESS PTO. The throttle integrated with
the belt drive engagement process helps ensure
that the PTO can only be engaged while the engine
is at low idle/low rpm. Automatically, the engine
throttles up to full rpm after the belt drive is fully
engaged. This system helps to reduce premature
wear to the belt drive system by preventing high
idle engagement of the cutter drum.
VERMEER.COM
BRUSH CHIPPER
BC1000XL
GENERAL
Length: 150″ (381 cm)
Width: 66.5″ (168.9 cm)
Height: 101″ (256.5 cm)
Weight: 4995 lb (2265.7 kg)
ENGINE OPTION ONE
Make and model: Deutz D2.9L Tier 4 Final
Horsepower: 49 hp (36.5 kW)
Max torque: 108 ft-lb (146.2 Nm)
Fuel type: Diesel
Number of cylinders: 4
Cooling medium: Liquid
CUTTING SYSTEM
Drum dimensions: 20″ diameter x 20″ wide (50.8 cm x 50.8 cm)
Drum speed: 2050 rpm
Knives: Two A8 chipper steel reversible
Shear bar: Four usable edges
Engagement system: Clutchless belt drive PTO
CAPACITIES/ELECTRICAL
Fuel tank: 25 gal (94.6 L)
Hydraulic tank: 7 gal (26.5 L)
Hydraulic flow (max): 2.7 gpm (10.2 L/min)
Electrical: 12 Volt
Lights: LED stop, turn, tail, license
BC1000XL BRUSH CHIPPER
ENGINE OPTION TWO
Make and model: Deutz TD2.9L Tier 4 Final
Horsepower: 74 hp (55 kW)
Max torque: 181 ft-lb (245.4 Nm)
Fuel type: Diesel
Number of cylinders: 4
Cooling medium: Liquid
CHASIS/BRAKES
Frame: .25″ x 7″ (63.5 cm x 17.8 cm) Z channel
Tires: ST235/80/R16 load range E
Axle/Suspension: 5200 lb (2359 kg)/Torsion
Optional axle/suspension: 7000 lb (3175.1 kg)/Torsion
Electric brakes with breakaway switch
OPTIONS
Extended warranty
Special paint
Planned maintenance
Vermeer Confidence Plus® Asset Protection Program
Hydraulic surge brakes
Tree Comander™ remote control
FEED SYSTEM
Chipping capacity (max): 12″ (30.5 cm)
Infeed opening height: 12″ (30.5 cm)
Infeed opening width: 17″ (43.2 cm)
Feed roller orientation: Single horizontal
Feed table height: 26″ (66 cm)
Feed speed (max): 105 fpm (32 m/min)
Feed roller dimensions: 20″ x 17″ (50.8 cm x 43.2 cm)
NOTES:
Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation.
Equipment shown is for illustrative purposes only and may display optional accessories or components. Please contact your local Vermeer dealer for more information on machine specifications.
Vermeer, the Vermeer logo, Equipped to Do More, EcoIdle, Tree Commander and Vermeer Confidence Plus are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries.
Deutz is a trademark of Klockner-Humboldt-Deutz Corporation. © 2015 Vermeer Corporation. All Rights Reserved. Printed in the U.S.A. Please recycle.
PN 180007890
********************************************************************************************
SEOCONTENT-END
20 Affected Products
Vehicles
MAKE | MODEL | YEAR |
VERMEER | AX19 | 2016-2020 |
VERMEER | BC1000XL | 2016-2020 |
VERMEER | BC1200XL | 2016-2020 |
VERMEER | BC1500 | 2016-2020 |
28 Associated Documents
Defect Notice 573 Report
RCLRPT-20V085-7118.PDF 216.045KB
Recall Acknowledgement
RCAK-20V085-9065.pdf 245.511KB
Recall 573 Report-Amendment 2
RCLRPT-20V085-4999.PDF 216.299KB
Miscellaneous Document- Drawing Specifications
RMISC-20V085-2773.PDF 110.548KB
Miscellaneous Document- Sales Literature
RMISC-20V085-5627.pdf 1598.956KB
Miscellaneous Document- Sales Literature (BRUSH CHIPPER)
RMISC-20V085-5001.pdf 2050.887KB
Safety Bulletin
RCSB-20V085-0078.pdf 1357.287KB
Remedy Instructions and TSB
RCRIT-20V085-0040.pdf 2292.005KB
Safety Bulletin
RCSB-20V085-1850.pdf 1862.163KB
Remedy Instructions and TSB
RCRIT-20V085-7252.pdf 2485.461KB
Safety Bulletin
RCSB-20V085-5046.pdf 1712.07KB
Remedy Instructions and TSB
RCRIT-20V085-8751.pdf 2315.21KB
Safety Bulletin
RCSB-20V085-0721.pdf 1278.595KB
Remedy Instructions and TSB
RCRIT-20V085-9112.pdf 2191.068KB
Remedy Instructions and TSB
RCRIT-20V085-1241.pdf 2830.369KB
Safety Bulletin
RCSB-20V085-8415.pdf 1794.04KB
Miscellaneous Document- Sales Literature
RMISC-20V085-1300.pdf 3861.554KB
Miscellaneous Document- Sales Literature
RMISC-20V085-1438.pdf 2994.155KB
Miscellaneous Document- Drawing Specification
RMISC-20V085-9981.PDF 108.502KB
Safety Bulletin
RCSB-20V085-4428.pdf 756.728KB
Recall Quarterly Report #2, 2020-4
RCLQRT-20V085-3769.PDF 211.24KB
Recall 573 Report- Amendment 9
RCLRPT-20V085-4290.PDF 223.065KB
Safety Bulletin
RCSB-20V085-4546.pdf 1481.595KB
Remedy Instructions and TSB
RCRIT-20V085-9989.pdf 1487.088KB
Remedy Instructions and TSB
RCRIT-20V085-9222.pdf 5116.088KB
Safety Bulletin
RCSB-20V085-7182.pdf 1601.275KB
Recall Quarterly Report #1, 2020-3
RCLQRT-20V085-4524.PDF 211.135KB
Recall 573 Report- Amendment 6
RCLRPT-20V085-2755.PDF 222.973KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V085&docType=RCL
- 🚗 WE' RE DIFFERENT - MIKKUPPA innovative closed end bulge Lug Nuts design provides a safer and more reliable closed end nut than any other on the market. One-piece design compared with other two-piece design, Anti-cracking off and make it aesthetically pleasing while ensuring safe driving. 【This kit does not hold the wheel cover! ! !】
- 🚗 PERFECT FIT - Replacement for 2004-2019 Acura TSX. 2002-2019 Chevy Trailblazer, 2001-2019 Ford Escape, 2000-2019 Ford Focus, 2006-2019 Ford Fusion, 1999-2019 Honda Accord/CR-V, 2005-2019 KIA Sportage LX EX, 1995-2019 Toyota Avalon, etc.
- 🚗 SPECIFICATION - M12x1.5 thread - closed end bulge style lug nuts - conical 60 degree seat - 19mm hex - 35.05mm long - 22mm wide - color: silver / chrome. Our nuts have an innovative design in appearance due to personal preference, but the thread specifications fully meet vehicle standards, buy with confidence.
- 🚗 ONE-PIECE LUG NUTS - The one-piece structure design is more splendid and safer than the two-piece design. Triple chrome, cold forged and heat treated steel, anti-rusting and anti-stripped, high strength and durability.
- 🚗 WORRY-FREE SHOPPING EXPERIENCE - We go above and beyond to provide the highest quality wheel lug nut and top notch customer service. Contact us and we will give you a satisfactory answer within 24 hours. The 12-month warranty gives you a worry-free shopping experience.
- One-piece Solid lug nuts feature durable design and provide perfect replacement for your Tacoma, 4Runner, Corolla, GX470
- Specifications: 12x1.5 Thread Pitch; 13/16'' (21mm) Hex; 1.49" (38mm) OAL; Closed End; Color: Chrome
- 10.9-grade Heat-treated premium steel construction, which offers better durability and strength.
- Replace Part # 9094201058, 9008017036, 90942-01058, 9008-17036, 9094201084
- One-piece lug nuts unlike OEM OEM Cap Construction lug nuts, which means Reeauto's Lug nuts will definitely not break apart like your TOYOTA, LEXUS stock lug nuts
- 🚗 WE' RE DIFFERENT - MIKKUPPA innovative closed end bulge Lug Nuts design provides a safer and more reliable closed end nut than any other on the market. One-piece design compared with other two-piece design, Anti-cracking off and make it aesthetically pleasing while ensuring safe driving.
- 🚗 PERFECT FIT - Compatible with 1987-2018 Jeep Wrangler, 2002-2012 Jeep Liberty, 1993-2010 Jeep Grand Cherokee, 1984-2001 Jeep Cherokee, 1994-2001 Dodge Ram 1500, 2007-2011 Dodge Nitro, 1991-2019 Ford Explorer, 1964-2014 Ford Mustang, etc.
- 🚗 SPECIFICATION - 1/2-20 thread - closed end bulge style lug nuts - conical 60 degree seat - 19mm hex - 1.4 in. long - 0.87 in. wide - color: silver/chrome. Our nuts have an innovative design in appearance due to personal preference, but the thread specifications fully meet vehicle standards, buy with confidence.
- 🚗 ANTI-OXIDATION - Triple chrome, cold forged and heat treated steel(anti-rusting and anti-stripped, high strength and durability). Precisely machined threads ensure a perfect fit on your vehicle's wheel studs. It's even perfect for professional mechanics.
- 🚗 MORE THAN LUG NUTS - We go above and beyond to provide the highest quality wheel lug nut and top notch customer service. Contact us and we will give you a satisfactory answer within 24 hours. The 12-month warranty gives you a worry-free shopping experience.
- 🚗 FITMENT - Replacement for 1999-2022 Chevy Silverado 1500, 2012-2022 Suburban, 2001-2022 Tahoe, 2000-2022 GMC Yukon, 1999-2022 Sierra 1500, and fit all m14x1.5 7/8" hex conical seat wheel nuts.
- 🚗 SPECIFICATION - M14x1.5 Thread - closed end bulge style lug nuts - conical 60 degree seat - 7/8" (22mm)hex - 1.46" Hight - color: silver / chrome.
- 🚗 ANTI-OXIDATION - Triple chrome, cold forged and heat treated steel(anti-rusting and anti-stripped, high strength and durability).
- 🚗 QUALITY - One-piece design, meets or exceeds OEM factory standards. It is perfect for those who live in the rust belt or an area that salts the roads during the winter.
- 🚗 WORRY-FREE SHOPPING EXPERIENCE - Contact us and we will give you a 100% satisfactory answer within 24 hours. The 12-month warranty gives you a worry-free shopping experience.
- Fitment- 2000-2014 Ford F-150, Expedition, 2000-2014 Lincoln Navigator
- Quality - Meets or Exceeds OEM Factory Standards
- Finish - Triple Plating- Two layers of nickel and one layer of chrome. Each lug nut is hand polished or tumbled before plating resulting in longer lasting, superior chrome finish
- Specs - 14x2.0 Thread, 13/16 Hex, 2.17' Height
- 100% Satifaction – No questions asked!!!
- For Select Aftermarket and Factory Wheels.
- Specifications: M12 x 1.50 Thread Pitch, 1.40” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Bulge Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues.
- 20 Pcs | M12 x 1.5 12 x 1.5 Thread | Type: Bulge Acorn | Length : 35mm 1.38" | Finish: Chrome | Hex: 3/4" 19mm | 2 Piece Construction
- Always use AMAZON CONFIRMED FIT to validate product fitment to your vehicle. This item fits Chevrolet 1982-2002 Camaro 1991-96 Caprice 1984-2019 Corvette 1982+ Malibu 2012-20 Sonic 2013+ Spark|Dodge 1983-87 Charger | Ford 2013-19 C-Max 1995-2000 Contour 1981-2003 Escort 2001-19 Fiesta 2012-18 Focus| Hyundai 2006-17 Azera 2007+ Elantra 2013-14 Elantra Coupe 2013-20 Elantra GT 2022+ Elantra N 2009-16 Genesis 2010-16 Genesis Coupe 2017+ Ioniq 2004+ Sonata 1985-87 Veloster 2019+ Veloster N
- Designed In USA - Two Piece Design ensures secure clamping in the event of wrong lug nut length. Cap will break protecting you from false torque readings. Giving you peace of mind. Meets or Exceeds OEM Factory Standards.
- Cold forged carbon steel. High quality precise threads. Built to SAE Standards. Rust resistant finish
- Includes 4 OE Factory Mag Style Chrome 12x1.5mm Lug Nuts For Toyota and Lexus!
- Thread: 12x1.5 Hex: 13/16" Overall Length: 1.47"
- Seat: Mag Seat
- Heat Treated 10.9 Grade Steel Material
- Cold Forged For Increased Strength and Durability. Meets or Exceeds OEM Factory Standards
- FITS: Aftermarket wheels requiring a lug bolt with a conical 60 degree seat, 27mm shank, and small diameter like spline drive or tuner style bolts.
- WILL NOT FIT: Factory OEM wheels or wheels made by the vehicle manufacturer.
- SPECS: M14x1.50B thread - Spline Tuner Style Lug Bolts - Conical 60 Degree Seat - 53.34mm long - 20.32mm wide - 27mm shank length
- REQUIRES: 17mm and 19mm hex spline tool/key part # BS-K-HC-CH04001 for installation and removal. One (1) tool included with this set.
- INCLUDES: 20 Chrome Spline Tuner Lug Bolts and one (1) spline tool/key for installation. Shipped in our signature premium packaging.
- 【14x1.5 Lug Nuts】M14x1.5 thread pitch, hex 3/4" (19mm), overall tall 2" (50mm), width 0.9"(23mm), closed end , 1 socket key 13/16"(21mm) and 7/8"(22mm) hex for installation.
- 【Fitment】Replacement for 1995-2020 Chevy Silverado 1500/2500/3500, 2015-2017 Ford F150/Expedition. It also works for 5 lugs and 6 lugs, a few more as a spare is also a good choice.
- 【One-piece Lug Nuts】One-piece design compared with other two-piece design, anti-cracking off and make it aesthetically pleasing while ensuring safe driving.
- 【Solid Lug Nuts】Clear and clean pitch thread, cold forged and heat treated SCM 435 steel paint will not fall off easily, that's more durable and stronger.
- 【2-Year Warranty】Included 32pcs black 7 spline lug nuts and 1socket key. If you have any problems, please contact us and we will give you a satisfactory answer within 24 hours.
Last update on 2024-03-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.