| “This site contains affiliate links for which OEMDTC may be compensated” |
January 17, 2020 NHTSA CAMPAIGN NUMBER: 20V023000
Axles may Fracture from Incorrect Heat Treating
The fracturing of the output shaft would result in a loss of drive, increasing the risk of a crash.
NHTSA Campaign Number: 20V023
Manufacturer Terex Advance Mixer, Inc.
Components POWER TRAIN
Potential Number of Units Affected 34
Summary
Terex Advance Mixer (Terex) is recalling certain 2020 FDC300, FD4000, FD5000GL, and FD7000B vehicles. The axle output shafts were incorrectly heat treated, possibly causing them to fracture.
Remedy
Terex has notified owners. Owners should inspect the Dana output flange for its production date. Dana will replace any that are in the affected range, free of charge. The recall began January 24, 2020. Owners may contact Terex customer service at 1-800-678-5961.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
NHTSA is missing critical, required information for this safety recall. This information must be supplied through the NHTSA Recalls Portal within 5 working days of confirming its accuracy:
– A statement that the defect or noncompliance can cause a vehicle crash without prior warning; or a description of whatever prior warning may occur, and a statement that if this warning is not heeded, a vehicle crash can occur (49 CFR 577.5 (f)(1)).
4 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| TEREX ADVANCE | FD4000 | 2020 |
| TEREX ADVANCE | FD5000GL | 2020 |
| TEREX ADVANCE | FD7000B | 2020 |
| TEREX ADVANCE | FDC300 | 2020 |
5 Associated Documents
Recall 573 Report-AMENDMENT 3
RCLRPT-20V023-7918.PDF 213.979KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-20V023-7370.pdf 245.799KB
Loading...
Recall 573 Report- Amendment 2
RCLRPT-20V023-9309.PDF 212.673KB
Loading...
Defect Notice 573 Report
RCLRPT-20V023-9502.PDF 212.108KB
Loading...
Recall Quarterly Report #1, 2020-1
RCLQRT-20V023-6847.PDF 211.131KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V023&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
- Great Compatibility — Works on Dana 30, 44 and 60 front differentials. (Please refer to the model in the product description list below the page)
- Upgrade Design — Designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal.
- Special Features — The different inner and outer diameters of the puck part of the tool press on many different seals. More efficient and durable to save your time and money.
- Superior Quality — Advanced CNC machined heavy duty steel with zinc black electroplated, durability, strong and anti-corrosion. High precision and hardness to provide a much longer service life.
- 100% Satisfaction Guarantee — If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!
- Great Compatibility — Perfectly fit for Jeep JK, JKU, TJ, LJ, XJ, YJ Dana 30 and Dana 44 front axles. For Jeep Wrangler 2-Door & 4-Door (JK/JKU) 2007-2018 | For Jeep Wrangler (YJ) 1987-1995 | For Jeep TJ 1997-2006 | For Jeep LJ 2004-2006 | For Jeep Cherokee (XJ) 1984-2001 | For Jeep Grand Cherokee 1993-2001. (NOT FIT vacuum disconnect axles or CV axles)
- Perfect Design — Each part is manufactured to OEM specifications and testing. Features 3 O-ring seals on the outer and 2 washer seals on the inner to provide double protection and a perfect barrier. Keep water, mud and debris from entering your front axle housing.
- Superior Quality — Premium grade CNC machined aircraft grade billet aluminum with red anodized finish, strength and durability, impact-resistance, anti-corrosion and never rust, high and low temperature resistance, built to withstand tough conditions for optimal performance and long-lasting reliability.
- Easy To Install — No damage to your car. Easy and quick installation about 10-15 minutes. Remove the front tire, brakes, and axle, clean the tube and then press the axle tube seal into the housing. Do Not Drive Vehicle Until Silicone Has Cured.
- 100% Satisfaction Guarantee — If you're not 100% satisfied with our items, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!
- Genuine OE replacement
- Package Weight: 1.12 kilograms
- Package Dimensions: 19.0 H x 13.1 L x 13.6 W (centimetres)
- Country of Origin : Mexico
- USA Standard 4340 Chrome-Moly replacement axle kit for TJ/XJ/YJ/WJ/ZJ front, Dana 30, 27 spline
- High Quality Bearings and Seals
- Includes Installation Guide
- Services One Side Only
- [Vehicle Fitment]: Compatible with Jeep Wrangler 2007-2018, Wrangler JK 2018 --- Dana 186 mm Axle; Differential Case Design Type: Dana 30
- [Reference Number]: 68004081AA, 68145055AA, 630429, 630-429
- [Specifications]: ① Location: Front Left (Driver Side); ② ABS Ring Included: No; ③ Axle Nut Included: Yes; ④ Compressed Length: 25.13 inch; ⑤ Input Shaft Spline Count: 27; ⑥ Output Shaft Spline Count: 32
- [Function]: CV axles serve as the final link between the engine and the wheels, transferring power from the vehicle's transmission and differential to the wheels to drive the vehicle forward.
- [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted CV axles. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.
Last update on 2024-06-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.