“This site contains affiliate links for which OEMDTC may be compensated” |
January 23, 2020 NHTSA CAMPAIGN NUMBER: 20V040000
Loss of Hydraulic Steering Assist
A loss of hydraulic steering assist can increase the risk of a crash.
NHTSA Campaign Number: 20V040
Manufacturer Rosenbauer America
Components STEERING, SUSPENSION
Potential Number of Units Affected 399
Summary
Rosenbauer America (Rosenbauer) is recalling certain 2014-2019 Emergency Response Commander vehicles equipped with Reyco front suspensions. The front shocks may separate from their upper mount on the front suspension. The loose shock may contact and damage the steering gear housing, possibly causing a steering fluid leak and a loss of power steering assist.
Remedy
Rosenbauer will notify owners, and Reyco dealers will install a new bolt, nut, hardened washer, and shim, free of charge. The recall began February 6, 2020. Owners may contact Reyco customer service at 1-765-543-5815 or Rosenbauer customer service at 1-877-543-5591.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Technical Service Bulletin 19 002
Date: 07/17/2019
REV: OR
Subject: Upper Shock Mounting Hardware
Condition: The upper shock mounting hardware may come loose over time due improper joint clamp load.
Applies To: Fire Truck IFS 20k and 24k Models
Mfg Date Range: 2014to July 2019.
Vocation: Fire Apparatus
Purpose: To provide instruction for inspection and repair of the effected joint.
Please Read the Entire Tech Tip Before Proceeding With Any Work. Follow industry standards regarding safety equipment and procedures.
Inspection and Repair should be conducted immediately.
Tools Needed:
1. 5/8″ hex (Allen) drive socket. Example Snap-On item # SA20E
2. Yi” or %” drive torque wrench – 250 ft-lbs capable
3. Yi” or %” breaker bar
4. W’ drive, 12″ long extension
5. 1 1/16″ box end wrench or similar torque drive adaptor for a socket.
Parts:
Kit #K715183 that includes the following:
(2) 714189-01 -Long Spacers
(2) 714190-01 – Sho1t Spacers
(2) 715176-01 – Socket head bolts
(2) 710356-01 – Ny-lock nuts
( 1) D7 l 5182 – Installation Instruction
Also include in the above kit are shims to address any variations in the width of cradle pocket (reference Step 2 and 5 below).
(2) 714198-01-0.020″ Shim
(2) 714199-01 -0.032″ Shim
(2) 714200-01 – 0.062″ Shim
(3) 714201-01-0.125″ Shim
(1) 715181-01 – “Go-No Go” Gage for use in Step 2.
Replacement:
- Remove and discard upper shock absorber eyelet hardware (nut, bolt, and spacers).
- Use the 715181-01 “Go-No Go” Gage to check the width of the pocket near the bolt holes.
- If the gage slips into the pocket, then the pocket is too wide and a shim will be needed to close the gap.
- If needed, add shims between one of the spacers and the pocket inside face during reassembly such that the gap between the spacer and the pocket wall is minimized. Use one of the 0.062 shims (#714200-01) if necessary to check that the gap is less than 0.062″ (Placing the shims against either the front or rear mount is acceptable).
- Install new hardware including spacers and shims from kit as shown below.
- Using a socket extension thru the access holes in the cradle, torque the head of the bolt to between 245 and 260 ft-lbs while holding the nut with a wrench.
- Repeat Steps I through 4 on the opposite side.
Labor Allowance: 0.7 hr not to exceed $85.00.
Note: To further assist our customers, if three (3) or more trucks are in close proximity, please contact Reyco Granning Warranty at (417) 466-1015 or email akuiken@reycogranning.com to arrange for a Reyco Granning Field Service Representative to conduct the repair.
For coverage please supply the following info with warranty claim and submit to chassis manufacturer.
1. Suspension serial number, located on tag at front of suspension
2. In Service Date
3. Inspection/repair date
4. Vehicle mileage
6 Affected Products
Vehicle
MAKE | MODEL | YEAR |
ROSENBAUER | COMMANDER | 2014-2019 |
8 Associated Documents
Defect Notice 573 Report
RCLRPT-20V040-8166.PDF 213.872KB
Recall Acknowledgement
RCAK-20V040-8463.pdf 178.773KB
Recall 573 Report- AMENDMENT 1
RCLRPT-20V040-7878.PDF 213.87KB
Recall Quarterly Report #3, 2020-3
RCLQRT-20V040-6660.PDF 211.303KB
Recall Quarterly Report #1, 2020-1
RCLQRT-20V040-6205.PDF 211.222KB
Recall Quarterly Report #2, 2020-2
RCLQRT-20V040-2099.PDF 211.222KB
Remedy Instructions and TSB
RCRIT-20V040-8061.pdf 1070.098KB
Recall Quarterly Report #4, 2020-4
RCLQRT-20V040-5903.PDF 211.41KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V040&docType=RCL
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
- MAG 1 AW32 (ISO32) 10-Weight Hydraulic Fluid is a high quality oil that is ideal for use in most 2-stage log splitter pumps. Benefits include exceptional protection against wear from contaminants and higher operating temperatures and pressures ensures longer equipment life.
- Reduces the operating temperature of hydraulic systems
- Conditions old seals and O-rings to stop and prevent future leaks
- Well suited for use in equipment with wet brakes
- Removes varnish and restores pressure for more efficient operation
- Compatible with both synthetic and conventional hydraulic fluids
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
- Extended Equipment Life: U1P-Duty ISO 68 AW Hydraulic Oil ensures 7,000 hours of reliable operation with top-tier additives, protecting against oxidation, corrosion, and wear for prolonged machinery life.
- Complete Protection: Its comprehensive additives resist rust, foam, and varnish formation, maintaining smooth operation, preventing filter blockage, and ensuring consistent viscosity over time.
- Versatile Performance: Suitable for high-pressure industrial applications, this fluid remains stable across wide temperature ranges, safeguarding critical components and seals.
- Premium Lubrication: Formulated with quality base stocks and anti-wear additives, it creates a robust film, guarding pumps, pistons, and cylinders from wear, promoting equipment longevity.
- Efficiency and Cleanliness: Its exceptional detergency, water separation, and anti-oxidation properties ensure equipment cleanliness, reducing sludge buildup and optimizing performance.
- Formulated with highly refined group ii base stocks for added resistance to thermal breakdown
- Superior wear protection to protect critical components
- Excellent frictional properties for smooth-shifting, excellent anti-shudder performance
- J20c equivalent, protection against varnish and sludge formation
- Superior thermal stability and oxidation resistance, good seal compatibility
Last update on 2024-03-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.