“This site contains affiliate links for which OEMDTC may be compensated” |
December 18, 2019 NHTSA CAMPAIGN NUMBER: 19V902000
Slide-Room may Extend Unexpectedly
If the slide-room extends or retracts unexpectedly, there is an increased risk of injury or a crash.
NHTSA Campaign Number: 19V902
Manufacturer Forest River, Inc.
Components EQUIPMENT
Potential Number of Units Affected 941
Summary
Forest River, Inc. (Forest River) is recalling certain 2018-2020 Dynamax Isata motorhomes. The slim-rack slide out mechanisms may activate unintentionally, extending or retracting the slide room unexpectedly.
Remedy
Forest River will notify owners, and dealers will install a new controller and switch for the slideout mechanism, free of charge. The recall began January 24, 2020. Owners may contact Forest River at 1-574-206-7600. Forest River’s number for this recall is 55-1030.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
FOLLOW-UP NOTICE OF SAFETY DEFECT
Our records indicate your vehicle has not been remedied; for your Safety and the Safety of others, please have your vehicles’ recall remedied as soon as possible.
NHTSA RECALL:19V902
CANADA RECALL: 2019-645
FR ID: 55-1030
<<VIN>>
<<OWNER NAME/DEALERNAME>>
<<ADDRESS>>
<<CITY>>, <<ST>> <<ZIP-XXX>>
6/22/2020
This Notice applies to your vehicle VIN listed above.
Dear Forest River Customer:
This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This notice is also sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Forest River – Office of Corporate Compliance (“OCC”) has decided that a defect, which relates to the motor vehicle safety, exists in 2018-2020 Dynamax Isata motorhome recreational vehicles. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.
WHAT IS THE DEFECT/NONCOMPLIANCE?
The Slim-rack slideout mechanisms may activate unintentionally moving the slide room in or out.
EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.
If a Slim-rack slideout mechanism began extending or retracting unintended it may increase the risk of personal injury or property damage while in motion.
WHAT IS FOREST RIVER AND OUR DEALERSHIPS GOING TO DO?
Forest River is notifying dealerships of the recall. You may have the recall corrected at any Forest River dealership. However, it is preferable if you have your selling dealership perform the remedy. Forest River completely covers your cost for the remedy; you will not receive any bill of sale for anything covered under the above recall number.
WHAT SHOULD YOU DO?
Please contact your dealer without delay and request a service appointment to schedule the free remedy The remedy will include a new slide controller and switch to be installed. The vehicle Owner is responsible for making arraignments to have the work completed. Please state you have been notified by Forest River of having a recall in process for your vehicle and provide the recall number for the dealership. It is also helpful to the dealership to have a copy of this letter when you take your vehicle in for the recall remedy.
You may also visit www.forestriverinc.com for dealer locations.
HOW LONG WILL THE REMEDY PROCESS TAKE?
The estimated time of repair is 1.5 hours per slide room. However, the dealership may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.
WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?
If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall inspected and/or performed to ensure the correct parts and procedures were utilized.
Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope of this defect under recall.
Please send the service invoice to the following address:
Dynamax
Forest River, Inc.
Attn: WARRANTY MANAGER
2745 Northland Dr
Elkhart, IN 46514
What if you no longer own this vehicle?
If you no longer own this vehicle and have the address for the current owner, please forward this letter to the new owner within 10 working days after the day in which the notice is received. You have received this letter because government regulations require that a notification is sent to the last known owner of record. Our records indicate that you are the current owner.
PLEASE NOTE: FEDERAL LAW REQUIRES THAT ANY VEHICLE LESSOR RECEIVING THIS RECALL NOTICE MUST FORWARD A COPY OF THIS NOTICE TO THE LESSEE WITHIN TEN DAYS.
WHAT IF I HAVE ALEADY HAD THIS RECALL PERFORMED?
Please provide a copy of the work order, or invoice showing the recall was performed. Please ensure the VIN is visible on the paperwork and send it to:
Email: occinfo@forestriverinc.com
Mail: Forest River Office of Corporate Compliance
423 N Main St Middlebury, IN 46540
MAY FOREST RIVER ASSIST YOU FURTHER?
If you have difficulties getting your vehicle repaired, please contact your Forest River Representative listed below:
CONTACT | PHONE |
CUSTOMER SERVICE | (574) 262-3474 |
If you are still having difficulty getting your vehicle/towable repaired in a reasonable amount of time or without change, you may write to the following address:
For US Owners Please Contact: | For Canadian Owners Please Contact: |
Administrator National Highway Traffic Safety Administration 1200 New Jersey Ave, S.E. Washington, D.C. 20590Or you may call the toll free Vehicle Safety Hotline at 1-888-327-4236 or (TTY: 1-800-424-9153).Or visit www.safercar.gov and search; Recall ID: 19V902 |
Head of Recalls Motor Vehicle Safety Investigations Laboratory Transport Canada 80 Noël street, Gatineau, Quebec, J8Z 0A1Telephone (800) 333-0510 Facsimile (819) 420-4292Recall ID: 2019-645 |
3 Affected Products
Vehicle
MAKE | MODEL | YEAR |
DYNAMAX | ISATA | 2018-2020 |
6 Associated Documents
Defect Notice 573 Report
RCLRPT-19V902-4946.PDF 214.509KB
Recall Quarterly Report #1, 2020-1
RCLQRT-19V902-3466.PDF 211.127KB
Recall Acknowledgement
RCAK-19V902-6434.pdf 244.727KB
Recall Quarterly Report #2, 2020-2
RCLQRT-19V902-8665.PDF 211.227KB
ISSUED Renotification Notice
RCRN-19V902-7910.pdf 212.778KB
Recall Quarterly Report #3, 2020-3
RCLQRT-19V902-2761.PDF 211.317KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V902&docType=RCL
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
- SUPERIOR WEAR PROTECTION: U1P ISO AW 68 Hydraulic Oil minimizes friction and wear for extended equipment life.
- VERSATILE PERFORMANCE: Suitable for high-pressure industrial applications, this fluid remains stable across wide temperature ranges, safeguarding critical components and seals.
- ADVANCED RUST & CORROSION PREVENTION: Protects hydraulic systems from rust and corrosion for optimal operation.
- OUTSTANDING DEMULSIFICATION: Separates water for cleaner oil and improved system life.
- EXCELLENT FILTERABILITY: Maintains performance at high temperatures and prevents filter clogs.
- Reduces the operating temperature of hydraulic systems
- Conditions old seals and O-rings to stop and prevent future leaks
- Well suited for use in equipment with wet brakes
- Removes varnish and restores pressure for more efficient operation
- Compatible with both synthetic and conventional hydraulic fluids
- MAG 1 AW32 (ISO32) 10-Weight Hydraulic Fluid is a high quality oil that is ideal for use in most 2-stage log splitter pumps. Benefits include exceptional protection against wear from contaminants and higher operating temperatures and pressures ensures longer equipment life.
- Formulated with highly refined group ii base stocks for added resistance to thermal breakdown
- Superior wear protection to protect critical components
- Excellent frictional properties for smooth-shifting, excellent anti-shudder performance
- J20c equivalent, protection against varnish and sludge formation
- Superior thermal stability and oxidation resistance, good seal compatibility
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.