| “This site contains affiliate links for which OEMDTC may be compensated” |
September 27, 2019 NHTSA CAMPAIGN NUMBER: 19V683000
Loose wheels may cause a loss of vehicle control, increasing the risk of a crash.
NHTSA Campaign Number: 19V683
Manufacturer Bombardier Recreational Products Inc.
Components WHEELS
Potential Number of Units Affected 6,632
Summary
Bombardier Recreational Products Inc. (BRP) is recalling certain 2019-2020 Can-Am Ryker motorcycles. The wheel nuts may crack, causing the wheels to loosen.
Remedy
BRP will notify owners, and dealers will replace the wheel nuts, free of charge. The recall began October 17, 2019. Owners may contact BRP customer service at 1-888-272-9222.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Campaign no.:
2019–0014
2020–0001
October 3, 2019
Subject: Wheel Nut May Crack
No. 2020-1
| MODEL YEAR | MODEL | ADMISSIBLE UNITS |
| 2019 – 2020 | Ryker® | Go to BOSSWeb/Warranty/Campaign Monitoring to know the quantity of units in your inventory impacted by this campaign |
| IMPORTANT
– When a vehicle comes in for service, always type the VIN in Knowledge Center tocheck for pending campaigns or alerts. – When performing any work on a vehicle, it is good practice to connect it to BUDS2 to ensure that all needed updates are done. |
||
PROBLEM
One or more wheel nuts may crack resulting in a reduced clamping force. This could eventually affect the integrity of the wheel assembly and the vehicle’s behavior. This may increase the risk of a crash.
SOLUTION
Replace all wheel nuts on the vehicle.
The improved nut has a pronounced groove on one of its edges.
PARTSREQUIRED
Order parts through regular channel.
Your order will be released progressively upon availability to ensure an even distribution across the network.
NOTE: Your order will be processed despite the message generated by selective release “No Availability Date at the Present Time” on BOSSWeb.
| DESCRIPTION | PART NUMBER | QTY |
| Wheel nut | 705402730 | 3 |
MANDATORY TOOLS
| REQUIRED TOOL |
| 65MM SOCKET (P/N 529 036 457) |
| Calibrated torque wrench ranging up to 350 N•m (258 lbf•ft).* |
| * Torque wrench calibration must be performed each year. |
CORRECTIVE ACTION
Before performing the procedure, it is strongly recommended to view the following video.
Wheel Nut Replacement Procedure – Help Video (Article #137066)
Removing the Front Wheel Nut
1. Place the vehicle on a level surface.
2. Lift and support the front of the vehicle.
USE THESE TUBES TO LIFT OR SUPPORT THE FRONT OF THE VEHICLE
3. Turn the handlebar and lock the wheel hub with a locking device (such as a long Allen key or a tempered steel rod).
4. Remove the RED locking clip.
5. Remove and discard the center lock wheel nut.
1. RED locking clip
2. Center lock wheel nut
3. Conical washer
4. Wheel
In the case of damaged parts, the standard warranty guidelines apply.
Installing Front Wheel Nut
NOTICE The installation instruction and tightening torque values must be strictly adhered to. Failure to do so can lead to rim damage.
The installation is the reverse of the removal procedure. However, pay attention to the following. Tighten the center lock wheel nut to specification.
NOTICE Never use impact tools to tighten wheel nuts.
| TIGHTENING TORQUE | |
| Center lock wheel nut | 300 N•m ± 15 N•m
(221 lbf•ft ± 11 lbf•ft) |
| WARNING |
| Failure to install the RED locking clip may cause the loss of a wheel if the center lock wheel nut becomes loose. |
RED locking clip installation is Mandatory
The folded end must point inside the drive axle.
1. Folded end pointing inside the drive axle
NOTICE Never untighten the nut to align the RED locking clip hole. Tighten the nut to the nominal value, then tighten further to align the hole.
Remove locking device from the wheel hub.
Removing the Rear Wheel Nut
1. Place the vehicle on a level surface.
2. Move the park position lever in the locked position.
3. Remove the RED locking clip.
4. Loosen the center lock wheel nut.
1. RED locking clip
2. Center lock wheel nut
5. Lift and support the rear of the vehicle.
USE THESE LOCATIONS TO LIFT OR SUPPORT THE REAR OF THE VEHICLE
6. Remove and discard the center lock wheel nut.
1. Center lock wheel nut
2. Conical washer
In the case of damaged parts, the standard warranty guidelines apply.
Installing the Rear Wheel Nut
NOTICE The installation instruction and tightening torque values must be strictly adhered to. Failure to do so can lead to rim damage.
The installation is the reverse of the removal procedure.
However, pay attention to the following.
Tighten the center lock wheel nut to specification.
NOTICE Never use impact tools to tighten wheel nuts.
| TIGHTENING TORQUE | |
| Center lock wheel nut | 300 N•m ± 15 N•m (221 lbf•ft ± 11 lbf•ft) |
| WARNING |
| Failure to install the RED locking clip may cause the loss of a wheel if the center lock wheel nut becomes loose. |
RED locking clip installation is Mandatory
The folded end must point inside the drive axle.
1. Folded end pointing inside the drive axle
NOTICE Never untighten the nut to align the RED locking clip hole. Tighten the nut to the nominal value, then tighten further to align the hole.
WARRANTY
Submit a warranty claim using the following information.
For claiming procedure, refer to the DEALER/DISTRIBUTORWARRANTYGUIDE.
| Product Line | Ryker |
| Unit Model Year | 2019 |
| Campaign/Bulletin/ Description | 14 / 2020-1 / Ryker
Wheel Nut |
| Total Labor time paid | 0.3 hour |
| Product Line | Ryker |
| Unit Model Year | 2020 |
| Campaign/Bulletin/ Description | 1 / 2020-1 / Ryker Wheel
Nut |
| Total Labor time paid | 0.3 hour |
ROADSTER 2020-1 Wheel Nut May Crack_137073_WSC61Y020S05_en
| WARNING |
| ALL INVOLVED CUSTOMERS MUST BE NOTIFIED, ALL INVOLVED UNITS MUST BE CORRECTED AS PER INSTRUCTIONS HEREIN. |
| Customer Letter Canada | Customer Letter Canada |
| Customer Letter USA | Customer Letter USA |
| Dealer Letter | Dealer Letter |
| Help Video | Help video |
| Product: | Roadster |
| Bulletin type: | Safety Campaign |
| Bulletin no: | 2020-1 (rbg2019-011 en NL/ML) |
| Revision no: | |
| Revision date: | |
| Campaign no.: | 2019–0014
2020–0001 |
| Publication date: | October 3, 2019 |
| Subject: | Wheel Nut May Crack |
| Model year | Model | Admissible Units |
| 2019 – 2020 | Ryker® | Go to BOSSWeb/Warranty/Campaign Monitoring to know the quantity of units in your inventory impacted by this campaign |
| IMPORTANT
– When a vehicle comes in for service, always type the VIN in Knowledge Center to check for pending campaigns or alerts. |
||
| Model year | Model | Admissible Units |
| – When performing any work on a vehicle, it is good practice to connect it to BUDS2 to ensure that all needed updates are done. | ||
PROBLEM
One or more wheel nuts may crack resulting in a reduced clamping force. This could eventually affect the integrity of the wheel assembly and the vehicle’s behavior. This may increase the risk of a crash.
SOLUTION
Replace all wheel nuts on the vehicle.
The improved nut has a pronounced groove on one of its edges.
PARTS REQUIRED
Order parts through regular channel.
Your order will be released progressively upon availability to ensure an even distribution across the network.
NOTE: Your order will be processed despite the message generated by selective release “No Availability Date at the Present Time” on BOSSWeb.
| Description | part number | QTY |
| Wheel nut | 705402730 | 3 |
MANDATORY TOOLS
| Required tool | |
| 65MM SOCKET (P/N 529 036 457) | |
| Calibrated torque wrench ranging up to 350 N•m (258 lbf•ft).* | |
| * Torque wrench calibration must be performed each year. | |
CORRECTIVE ACTION
Before performing the procedure, it is strongly recommended to view the following video.
| Wheel Nut Replacement Procedure – Help Video (Article #137066) |
Removing the Front Wheel Nut
- Place the vehicle on a level surface.
- Lift and support the front of the vehicle.
USE THESE TUBES TO LIFT OR SUPPORT THE FRONT OF THE VEHICLE
- Turn the handlebar and lock the wheel hub with a locking device (such as a long Allen key or a tempered steel rod).
- Remove the RED locking clip.
- Remove and discard the center lock wheel nut.
1. RED locking clip
2. Center lock wheel nut
3. Conical washer
4. Wheel
In the case of damaged parts, the standard warranty guidelines apply.
Installing Front Wheel Nut
NOTICE The installation instruction and tightening torque values must be strictly adhered to. Failure to do so can lead to rim damage.
The installation is the reverse of the removal procedure. However, pay attention to the following.
Tighten the center lock wheel nut to specification.
NOTICE Never use impact tools to tighten wheel nuts.
|
Tightening torque |
|
| Center lock wheel nut | 300 ± 15 N•m (221 ± 11 lbf•ft) |
| WARNING |
| Failure to install the RED locking clip may cause the loss of a wheel if the center lock wheel nut becomes loose. |
RED locking clip installation is Mandatory
The folded end must point inside the drive axle.
1. Folded end pointing inside the drive axle
NOTICE Never untighten the nut to align the RED locking clip hole. Tighten the nut to the nominal value, then tighten further to align the hole.
Remove locking device from the wheel hub.
Removing the Rear Wheel Nut
- Place the vehicle on a level surface.
- Move the park position lever in the locked position.
- Remove the RED locking clip.
- Loosen the center lock wheel nut.
1. RED locking clip
2. Center lock wheel nut
- Lift and support the rear of the vehicle.
USE THESE LOCATIONS TO LIFT OR SUPPORT THE REAR OF THE VEHICLE
- Remove and discard the center lock wheel nut.
1. Center lock wheel nut
2. Conical washer
In the case of damaged parts, the standard warranty guidelines apply.
Installing the Rear Wheel Nut
NOTICE The installation instruction and tightening torque values must be strictly adhered to. Failure to do so can lead to rim damage.
The installation is the reverse of the removal procedure. However, pay attention to the following.
Tighten the center lock wheel nut to specification.
NOTICE Never use impact tools to tighten wheel nuts.
| Tightening torque | |
| Center lock wheel nut | 300 ± 15 N•m (221 ± 11 lbf•ft) |
| WARNING |
| Failure to install the RED locking clip may cause the loss of a wheel if the center lock wheel nut becomes loose. |
RED locking clip installation is Mandatory
The folded end must point inside the drive axle.
1. Folded end pointing inside the drive axle
NOTICE Never untighten the nut to align the RED locking clip hole. Tighten the nut to the nominal value, then tighten further to align the hole.
Submit a warranty claim using the following information.
For claiming procedure, refer to the DEALER/DISTRIBUTOR WARRANTY GUIDE.
| Product Line | Ryker |
| Unit Model Year | 2019 |
| Campaign/Bulletin/ Description | 14 / 2020-1 / Ryker Wheel Nut |
| Total Labor time paid | 0.3 hour |
| Product Line | Ryker |
| Unit Model Year | 2020 |
| Campaign/Bulletin/ Description | 1 / 2020-1 / Ryker Wheel Nut |
| Total Labor time paid | 0.3 hour |
IMPORTANT SAFETY RECALL NOTICE
October 3, 2019
Subject: Can-Am® Ryker – Wheel nut may crack
Dear Can-Am On-Road Dealer / Distributor,
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act and the Canada Motor Vehicle Safety Act. BRP is conducting a safety recall on the 2019 and 2020 Can-Am Ryker.
What is the potential problem?
The wheel nuts may crack resulting in a reduced clamping force. This could eventually affect the integrity of the wheel assembly and the vehicle’s behavior. This may increase the risk of a crash.
Which models are involved?
Specific serial numbers of model year 2019 and 2020 Can-Am Ryker.
What will BRP do?
BRP intends to repair involved vehicles, free of charge for the customer. The parts required to
provide the remedy to this condition will be made available progressively.
BRP is sending a Safety Recall Notice letter to all known registered owners of the
involved vehicles to inform them of the safety recall.
BRP is posting this notice and attached Safety Campaign Bulletin on its BOSSWeb dealer
website (www.bossweb.brp.com).
Information for customers will be posted on its public website (www.can-am.brp.com).
What should you do?
- Do not deliver any involved vehicle that you have in stock as federal law requires you to complete the recall service on these vehicles before retail delivery.
- Contact all your customers who have purchased an affected Can-Am Ryker. You must inform them about the foregoing and must request them to make an appointment to get their vehicle repaired. Your customers may continue to ride their vehicle. If the vehicle has one or more cracked nuts, we encourage them to make the update promptly.
Note: The presence of the red locking clip prevents a cracked nut from unscrewing. - Follow all instructions provided in the attached Safety Campaign Bulletin.
Please note that the National Traffic and Motor Vehicle Safety Act provides that each vehicle which is subject to a recall campaign of this type must be adequately repaired within a reasonable time after the owner has tendered it for repair. Failure to repair within sixty (60) days after tender of a vehicle is prima facie evidence of failure to repair within a reasonable time. The owner may be entitled to an identical or reasonably equivalent vehicle at no charge or to a refund of the purchase price less a reasonable allowance for depreciation.
If you have questions about this notice, please communicate with us:
- By submitting a BOSSWeb case. A service representative will communicate with you.
OR
- In Canada: 1-800-361-9980
Eastern time Monday to Friday from 10:00 AM to 5:00 PM
- In USA : 1-800-366-6992
Eastern time Monday to Friday from 10:00 AM to 5:00 PM
BRP prides itself on being an industry leader and providing you, as well as our customers, with the very best information so we can collectively preserve the reputation of our products.
We apologize for any inconvenience this may have caused you or your customers.
Sincerely,
BRP Customer Services Department
IMPORTANT SAFETY RECALL NOTICE
This notice applies to your vehicle
«SERNR» «MODEL_YR» «CMP_NO»
«NAME2» «NAME3» «NAME1»
«STREET»
«CITY» «REGION» «ZIP»
«COUNTRY»
October 2019
Subject: Can-Am® Ryker – Wheel nut may crack
Dear Can-Am On-Road owner,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. BRP has decided that a defect which relates to motor vehicle safety exists on the 2019 and 2020 Ryker and is conducting a safety recall.
Our records show that you own a potentially affected vehicle.
What is the potential problem?
The wheel nuts may crack resulting in a reduced clamping force. This could affect the integrity of the wheel assembly and the vehicle’s handling and control. This may increase the risk of a crash.
Which models are involved?
Specific serial numbers of model year 2019 and 2020 Can-Am Ryker.
What will BRP do?
BRP will repair your vehicle free of charge. The corrective action involves replacing the three wheel nuts. This service should take less than one hour. The parts required to provide the remedy to this condition will be made available progressively.
What should you do?
Contact your authorized BRP Can-Am On-Road dealer and schedule an appointment to have the safety recall performed on your vehicle.
You may continue to ride your vehicle. If your vehicle has one or more cracked nuts, we encourage you to have your vehicle updated promptly.
Note: The presence of the red locking clip prevents a cracked nut from unscrewing.
Although your unit may have aftermarket modifications, you can still receive this service free of charge. The presence of these modifications, while the service is being completed, will not void any existing warranty or service contract.
If you previously had to replace the wheel nuts and BRP did not cover the cost of the repair, please contact us for reimbursement. However, your vehicle will still need to be repaired to install the new wheel nuts.
If you believe that the dealer or BRP has failed or is unable to remedy the defect within a reasonable time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue S.E. Washington, D.C. 20590, or call the toll free Auto Safety Hot Line at 1-888-327-4236 (TTY: 1-800-424-9153), or go to https://www.safercar.gov. If you are a vehicle lessor, federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
What to do if you feel this notice is an error?
This notice was mailed to you according to the most current information we have available. If any information in this notice is incorrect, please contact BRP at your earliest convenience.
If you have questions, need assistance, or to find your nearest authorized BRP dealer:
- Visit www.can-am.brp.com
- In USA call:
1-888-272-9222
8:00 AM to 8:00 PM Eastern time 7 days a week.
Your safety and continued satisfaction with our products are a priority for us. We apologize for any inconvenience this may cause you and remain committed to facilitate the process as much as we can.
Thank you for your immediate attention to this matter.
Sincerely,
BRP Customer Services Department
IMPORTANT SAFETY RECALL NOTICE
This notice applies to your vehicle
«SERNR» «MODEL_YR» «CMP_NO»
«NAME2» «NAME3» «NAME1»
«STREET»
«CITY» «REGION» «ZIP»
«COUNTRY»
June 15, 2020
RenotificationBRP is sending you this renotification letter because our records show that you own a potentially affected vehicle that has not been inspected nor repaired. |
————————–COVID-19—————————-
In the light of the COVID-19 situation, as local authorities continue to adopt ‘Stay at Home’ policies in different parts of the world, we kindly ask you to contact your local dealer before paying a visit, as its business hours or services may have changed or it might be temporarily closed.
Also, please note that the current context may affect the availability of some parts, or slow the process down.
Nonetheless, we are committed to continue to provide you with the safety recall information related to your vehicle and we are doing our best to reduce the potential impact that this situation may have on you.
October 2019
Subject: Can-Am® Ryker – Wheel nut may crack
Dear Can-Am On-Road owner,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. BRP has decided that a defect which relates to motor vehicle safety exists on the 2019 and 2020 Ryker and is conducting a safety recall.
Our records show that you own a potentially affected vehicle.
What is the potential problem?
The wheel nuts may crack resulting in a reduced clamping force. This could affect the integrity of the wheel assembly and the vehicle’s handling and control. This may increase the risk of a crash.
Which models are involved?
Specific serial numbers of model year 2019 and 2020 Can-Am Ryker.
What will BRP do?
BRP will repair your vehicle free of charge. The corrective action involves replacing the three wheel nuts. This service should take less than one hour. The parts required to provide the remedy to this condition will be made available progressively.
What should you do?
Contact your authorized BRP Can-Am On-Road dealer and schedule an appointment to have the safety recall performed on your vehicle.
You may continue to ride your vehicle. If your vehicle has one or more cracked nuts, we encourage you to have your vehicle updated promptly.
Note: The presence of the red locking clip prevents a cracked nut from unscrewing.
Although your unit may have aftermarket modifications, you can still receive this service free of charge. The presence of these modifications, while the service is being completed, will not void any existing warranty or service contract.
If you previously had to replace the wheel nuts and BRP did not cover the cost of the repair, please contact us for reimbursement. However, your vehicle will still need to be repaired to install the new wheel nuts.
If you believe that the dealer or BRP has failed or is unable to remedy the defect within a reasonable time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue S.E. Washington, D.C. 20590, or call the toll free Auto Safety Hot Line at 1888-327-4236 (TTY: 1-800-424-9153), or go to https://www.safercar.gov. If you are a vehicle lessor, federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
What to do if you feel this notice is an error?
This notice was mailed to you according to the most current information we have available. If any information in this notice is incorrect, please contact BRP at your earliest convenience.
If you have questions, need assistance, or to find your nearest authorized BRP dealer:
- Visit www.can-am.brp.com
- In USA call:
1-888-272-9222
8:00 AM to 8:00 PM Eastern time 7 days a week.
Your safety and continued satisfaction with our products are a priority for us. We apologize for any inconvenience this may cause you and remain committed to facilitate the process as much as we can.
Thank you for your immediate attention to this matter.
Sincerely,
BRP Customer Services Department
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| CAN-AM | RYKER | 2019-2020 |
18 Associated Documents
Recall Quarterly Report #1, 2019-4
RCLQRT-19V683-6503.PDF 211.134KB
Loading...
Reload document 
Open in new tab
Recall Quarterly Report #1, 2019-4
RCLQRT-19V683-5769.PDF 211.141KB
Loading...
Recall 573 Report – Amendment 3
RCLRPT-19V683-6750.PDF 216.184KB
Loading...
Recall Quarterly Report #3, 2020-2
RCLQRT-19V683-6544.PDF 211.326KB
Loading...
Recall Quarterly Report #2, 2020-1
RCLQRT-19V683-5623.PDF 211.228KB
Loading...
Miscellaneous Document – YouTube Link
RMISC-19V683-8241.pdf 42.531KB
Loading...
Recall 573 Report – Amendment 2
RCLRPT-19V683-7086.PDF 216.015KB
Loading...
ISSUED Renotification Notice
Loading...
Recall 573 Report – Amendment 1
RCLRPT-19V683-7890.PDF 215.322KB
Loading...
Miscellaneous Document – Dealer Community Article help video
RMISC-19V683-7651.pdf 31.574KB
Loading...
Manufacturer Notices(to Dealers,etc)- 10/3/19
RCMN-19V683-5182.pdf 165.612KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-19V683-7098.pdf 66.938KB
Loading...
Manufacturer Notices(to Dealers,etc)- Dealer Community Post
Loading...
Miscellaneous Document – Dealer banner GIF images
RMISC-19V683-7576.pdf 98.432KB
Loading...
Remedy Instructions and TSB
RCRIT-19V683-6109.pdf 449.352KB
Loading...
Remedy Instructions and TSB
RCRIT-19V683-5281.pdf 428.955KB
Loading...
Recall Acknowledgement
RCAK-19V683-4530.pdf 314.386KB
Loading...
Defect Notice 573 Report
RCLRPT-19V683-8289.PDF 214.703KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V683&docType=RCL
- 🚗 WE' RE DIFFERENT - MIKKUPPA innovative closed end bulge Lug Nuts design provides a safer and more reliable closed end nut than any other on the market. One-piece design compared with other two-piece design, Anti-cracking off and make it aesthetically pleasing while ensuring safe driving. 【This kit does not hold the wheel cover! ! !】
- 🚗 PERFECT FIT - Replacement for 2004-2019 Acura TSX. 2002-2019 Chevy Trailblazer, 2001-2019 Ford Escape, 2000-2019 Ford Focus, 2006-2019 Ford Fusion, 1999-2019 Honda Accord/CR-V, 2005-2019 KIA Sportage LX EX, 1995-2019 Toyota Avalon, etc.
- 🚗 SPECIFICATION - M12x1.5 thread - closed end bulge style lug nuts - conical 60 degree seat - 19mm hex - 35.05mm long - 22mm wide - color: silver / chrome. Our nuts have an innovative design in appearance due to personal preference, but the thread specifications fully meet vehicle standards, buy with confidence.
- 🚗 ONE-PIECE LUG NUTS - The one-piece structure design is more splendid and safer than the two-piece design. Triple chrome, cold forged and heat treated steel, anti-rusting and anti-stripped, high strength and durability.
- 🚗 WORRY-FREE SHOPPING EXPERIENCE - We go above and beyond to provide the highest quality wheel lug nut and top notch customer service. Contact us and we will give you a satisfactory answer within 24 hours. The 12-month warranty gives you a worry-free shopping experience.
- For Select Aftermarket and Factory Wheels.
- Specifications: M12 x 1.50 Thread Pitch, 1.40” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Bulge Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues.
- 🚗 FITMENT - Replacement for 1999-2022 Chevy Silverado 1500, 2012-2022 Suburban, 2001-2022 Tahoe, 2000-2022 GMC Yukon, 1999-2022 Sierra 1500, and fit all m14x1.5 7/8" hex conical seat wheel nuts.
- 🚗 SPECIFICATION - M14x1.5 Thread - closed end bulge style lug nuts - conical 60 degree seat - 7/8" (22mm)hex - 1.46" Hight - color: silver / chrome.
- 🚗 ANTI-OXIDATION - Triple chrome, cold forged and heat treated steel(anti-rusting and anti-stripped, high strength and durability).
- 🚗 QUALITY - One-piece design, meets or exceeds OEM factory standards. It is perfect for those who live in the rust belt or an area that salts the roads during the winter.
- 🚗 WORRY-FREE SHOPPING EXPERIENCE - Contact us and we will give you a 100% satisfactory answer within 24 hours. The 12-month warranty gives you a worry-free shopping experience.
- Complete Package - 1/2 x 20 Lug Nuts, Chrome, Open-End Bulge Acorn Lug Nut
- Specifications - 1/2-20 lug nuts, Thread Pitch, 0.84†Overall Height, 0.9†Diameter, 60-degree Conical Seat, Open-End Bulge Acorn Design. For 5 Lug Wheels.
- Durable Finish - The zinc finish on these lugnuts not only enhances the luster of your wheels but also provides protection against rust and corrosion, ensuring they look great for years to come.
- Lug Nuts Aftermarket - Designed specifically for aftermarket 5-lug wheels, these wheel nuts are not recommended for use on OEM wheels, ensuring you get the best possible performance and compatibility.
- Features - Zinc finish, cold-forged and heat-treated to industry standards. Solid 1-pc lugnut design offers durable, rigid construction. Open-End style allows for use on any length stud, great for trailers or wheel spacers.
- 🚗【1.80" LONG】M14x1.5 thread - closed end bulge style lug nuts - conical 60 degree seat - 19mm hex - 1.80 in. long - 0.90 in. wide - color: Chrome. Our nuts have an innovative design in appearance due to personal preference, but the thread specifications fully meet vehicle standards, buy with confidence.
- 🚗 【PERFECT FIT】Replacement for 2007-2013 Avalanche, 2015-2021 Colorado, 2003-2014 Express 1500, 1999-2021 Silverado 1500, 2015-2021 Suburban, 2000-2014 Suburban 1500, 1995-2020 Tahoe, 2009-2020 Traverse, 2007-2020 Acadia, 2015-2020 Canyon, 1999-2020 Sierra 1500, 2000-2020 Yukon, 2015-2020 F150/Expedition.
- 🚗【ONE-PIECE DESIGN】On vehicle testing, one-piece design compared with other two-piece design, Anti-cracking off and make it aesthetically pleasing while ensuring safe driving. Our products have undergone extensive on-vehicle testing to ensure proper fit and long-lasting performance before selling them.
- 🚗【ANTI-RUST PROCESS】The surface of the lug nut is chrome-plated, after 72 hours of strict salt spray test, which not only makes the nut resistant to oxygen and corrosion, but also gives the nut a bright visual impact. Using infrared drying technology, the paint is integrated with the metal and will Not fall off easily. Manufactured with high-quality SCM 435 Steel (Heat Treated) for stronger.
- 🚗【WORRY-FREE SHOPPING EXPERIENCE】If there is a problem with the number of missing nuts, please don't hesitate to contact us. Every MIKKUPPA product enjoys a 24-hour response, a 30-day unconditional refund and a 1 year warranty. Professional customer service promise to give you a satisfied solution.
- 🚙【WHEEL BOLT LUG NUTS COMPATIABLE VEHICLES】M12x1.25 wheel bolt compatible with 2017-2019 for Compass,2014-2023 for Cherokee,2015-2022 for Renegade, 2015-2017 for Chrysler 200, 2013-2016 for Dodge Dart, 2012-2017 for Fiat 500
- 🚙【FEARTURES】20 Pcs wheel bolts lug nuts are 12*1.25, shank length 28mm. Hex Size:17mm, Seat:Conical/60 grade 35CrMo Lug Nuts are Cold Forged/Exceeds OEM Quality
- 🚙【HIGH QUALITY】These M12x1.25 wheel studs lugs nuts are made from 35CrMo which have tested and meet or exceed OEM performance requirements
- 🚙【PLEASE CHECK】 Check your original thread pitch and seat type carefully, this only fit for M12x1.25 and conical/cone seat as shown
- 🚙【BUYING SERVICE】We provide ONE YEAR WARRANTY for our this product.If you have any questions about products, please feel free contact us, we will provide you with the most satisfactory solution
- Country Of Origin : China
- Height: 1. 40 Inch
- Hex Size: 3/4 Inch
- Package Weight : 2.38 Lbs
- One-piece Solid lug nuts feature durable design and provide perfect replacement for your Tacoma, 4Runner, Corolla, GX470
- Specifications: 12x1.5 Thread Pitch; 13/16'' (21mm) Hex; 1.49" (38mm) OAL; Closed End; Color: Chrome
- 10.9-grade Heat-treated premium steel construction, which offers better durability and strength.
- Replace Part # 9094201058, 9008017036, 90942-01058, 9008-17036, 9094201084
- One-piece lug nuts unlike OEM OEM Cap Construction lug nuts, which means Reeauto's Lug nuts will definitely not break apart like your TOYOTA, LEXUS stock lug nuts
- For Select Aftermarket or Factory Wheels or Wheels wih Hubcaps Covers
- M12 x 1.50 Thread Pitch, 0.79” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Open-End Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues.
- 20 Pcs | M12 x 1.5 12 x 1.5 Thread | Type: Bulge Acorn | Length : 35mm 1.38" | Finish: Chrome | Hex: 3/4" 19mm | 2 Piece Construction
- Always use AMAZON CONFIRMED FIT to validate product fitment to your vehicle. This item fits Chevrolet 1982-2002 Camaro 1991-96 Caprice 1984-2019 Corvette 1982+ Malibu 2012-20 Sonic 2013+ Spark|Dodge 1983-87 Charger | Ford 2013-19 C-Max 1995-2000 Contour 1981-2003 Escort 2001-19 Fiesta 2012-18 Focus| Hyundai 2006-17 Azera 2007+ Elantra 2013-14 Elantra Coupe 2013-20 Elantra GT 2022+ Elantra N 2009-16 Genesis 2010-16 Genesis Coupe 2017+ Ioniq 2004+ Sonata 1985-87 Veloster 2019+ Veloster N
- Designed In USA - Two Piece Design ensures secure clamping in the event of wrong lug nut length. Cap will break protecting you from false torque readings. Giving you peace of mind. Meets or Exceeds OEM Factory Standards.
- Cold forged carbon steel. High quality precise threads. Built to SAE Standards. Rust resistant finish
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.