RC000171 – MORryde Battery Tray – 2019-2020 Thor Omni & Magnitude Motorhomes

“This site contains affiliate links for which OEMDTC may be compensated”

August 1, 2019 NHTSA CAMPAIGN NUMBER: 19V566000

Battery Tray May Detach From Chassis

If the battery tray detaches from the chassis, the battery may discharge, causing the vehicle to stall and increasing the risk of a crash.

 

NHTSA Campaign Number: 19V566

Manufacturer Thor Motor Coach

Components EQUIPMENT

Potential Number of Units Affected 181

 

Summary

Thor Motor Coach (TMC) is recalling certain 2019-2020 Omni and Magnitude motorhomes. The battery tray may be improperly welded to the chassis frame, allowing the battery tray to detach from the chassis.

 

Remedy

TMC has notified owners, and dealers will weld on an additional support to the battery tray, free of charge. The recall began August 8, 2019. Owners may contact TMC customer service at 1-877-855-2867. TMC’s number for this recall is RC000171.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


Thor Motor Coach

Recall Repair Instructions

 

Recall # 19V-566

2019-374

Description/Title: MORryde Battery Tray
Affected Product Line(s): Certain MY 2019/2020 Magnitude & Omni motorhomes
Service Campaign # : RC000171 Released Date: 08/5/2019
Repair Code: TMCRC80485V Document Date: 08/5/2019
Time Allowed: 1.0 Document Revision: A

 

Issue: 

The battery tray that is welded onto the frame of F550 chassis could be compromised due to inadequate welds.  Production run on a specific line at MORryde had inadequate weld applied. The inadequate welds have a potential of failing causing the battery tray to break free from the chassis and allowing the contents of the tray to discharge. This could potentially cause personal injury, property damage, a crash. In addition, if the battery posts or cables make contact with surrounding metal components, this could cause an electrical short, increasing the risk of a potential fire.

 

Thor Super C Battery Tray  Repair Instructions

 

OBJECTIVE: Weld on additional support to the battery tray.

Supplemental Information: The battery tray is located directly under the entry step on the passenger side of the unit. This tray can be accessed by unlatching the top step. It is also accessible underneath the unit behind the sidewall.

                                                                                        

Materials Required:

  • Weld resistant blankets
  • Welder
  • Black spray paint
  • Two steel 1” x 1” formed angles six inches long 14 gage or thicker
    • If you do not have access to this material, please contact MORryde warranty at MorrydeWarranty@morryde.com to have this supplied for you.
    • MORryde part number (A-01-6-FWA-P)

NOTE: Up to $15 will be covered during claim process for shop supplies used to complete recall repair.

 

Repair Instructions:

  1. Open the hood and disconnect the positive and then the negative battery cables on both batteries. Once batteries have been disconnected, unclip all three harnesses on the electronic control module.

 

  1. Locate the battery tray and disconnect both house batteries then wrap batteries, battery cables and fuse boxes with weld resistant blankets.
  2. Weld one of the 1” X 1” angles to the inside or outside of each battery tray leg. The angle should be placed flush up against the side of the battery tray and flat up against the chassis. At least two inches of the angle should make contact to the battery tray to provide the required support. Weld all vertical seams available where the angle touches the battery tray or chassis rail. Do not weld on the chassis frame bend radius.

 

  1. After work area has been able to cool, scrap off all burned off paint. Spray paint the newly installed angle, all welds and any areas where the original paint has burned off.
  2. Remove all weld blankets, reconnect the electronic control module and both batteries.

 

Thor Motor Coach
1-877-500-1020
NHTSA Recall # 19V-566
Transport Canada Recall # 2019-374

 


RECREATIONAL VEHICLE
SAFETY RECALL NOTICE
Safety Recall: 19V-566
Safety Advisory: RC000171
August 2019

 

IMPORTANT SAFETY RECALL
This notice applies to your vehicle:  «VIN»

«Owner_name»
«Street»
«City», «State»  «Zip»

 

Dear «Owner_name»:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Thor Motor Coach (TMC) has decided that a defect which relates to motor vehicle safety exists in certain model year 2019/2020 Magnitude & Omni motorhomes. As a result, TMC is conducting a safety recall.  We apologize for any inconvenience this action may cause you; however your safety and continued satisfaction are of the utmost importance to us.

Reason for this recall It has been discovered that on certain model year 2019/2020 Magnitude & Omni Motorhomes, the battery tray has inadequate welds onto the chassis frame. The inadequate welds have a potential of failing causing the battery tray to break free from the chassis and allowing the contents of the tray to discharge. This could potentially cause personal injury, property damage, a crash. In addition, if the battery posts or cables make contact with surrounding metal components, this could cause an electrical short, increasing the risk of a potential fire.
What we will do MC has contacted your selling dealer and has instructed them on how to reinforce the weld area of battery tray. This will be done at no cost to you the owner.  The remedy should take approximately one (1) hour to perform.
What we need you to do At your earliest convenience, please contact your dealer and schedule an appointment to have this remedy completed. To locate the nearest authorized TMC service center, please visit https://www.thormotorcoach.com/locate-a-service-center/.  If you have questions concerning this recall or if you need any assistance, please contact the TMC Warranty/Service Department by mail at TMC, P.O. Box 1486, Elkhart, IN 46515-1486, by phone at 877-855-2867, or email at Recalls@TMCRV.com.

 

If you had appropriate repairs completed prior to receipt of this recall notice, and if you incurred any direct cost in connection with obtaining such repair, you may be eligible to receive reimbursement from TMC by contacting the TMC Warranty/Service Department.

If after contacting TMC Customer Service you are still not satisfied we have done our best to remedy this situation, you may also submit a written complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590. You may call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY:  1-800424-9153; or go to https://www.safercar.gov.) Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.

Thank you for your attention and cooperation in this matter.                                

 

Sincerely,

Thor Motor Coach

 

Celina Tyler
Consumer Affairs Manager
cc:  National Highway Traffic Safety Administration (NHTSA)


IMPORTANT SAFETY RECALL
RC000171
This notice applies to vehicle:  «VIN»

 

«Dealer_name»
«Street»
«City», «State»  «Zip»

 

Dear Dealer:

This Safety Recall Notice is sent to you in accordance with the requirements of the United States National Traffic and Motor Vehicle Safety Act and The Canadian Motor Vehicle Safety Act and is important for your safety.

Thor Motor Coach (TMC) decided that a defect which relates to motor vehicle safety exists in certain models of the below listed motorhomes.

It has been discovered that on certain model year 2019/2020 Magnitude & Omni Motorhomes, the battery tray has inadequate welds onto the chassis frame. The inadequate welds have a potential of failing causing the battery tray to break free from the chassis and allowing the contents of the tray to discharge. This could potentially cause personal injury, property damage, a crash. In addition, if the battery posts or cables make contact with surrounding metal components, this could cause an electrical short, increasing the risk of a potential fire. 

The required action is to reinforce the weld area of battery tray.

 

Dealers that have stock units impacted by this recall can access the full list of affected VINs sold to their dealership by accessing the “Service Campaign” portion of the TMC Advantage Web Portal.  If any unit on this list has been retail sold you are asked to notify the retail owner as soon as possible of this recall because their vehicle was not registered at the time the retail notice was mailed.  Please immediately register any retail sold units on this list.  As a reminder, you are required by law to complete this recall on any stock units in inventory prior to retail sale.  Any vehicle lessor receiving this notice must forward a copy to the lessee within 10 days. 

If you have questions concerning this recall, please contact the TMC Warranty/Service Department by mail at TMC, P.O. Box 1486, Elkhart, IN 46515-1486, or by phone at (877) 500-1020. 

We apologize for this inconvenience; however, we have taken this action in the interest of customer safety and continued satisfaction with our products.  

 

Sincerely,

Celina Tyler
Consumer Affairs Manager

 

Re: NHTSA Recall No. 19V-566
Transport Canada No. 2019-374


4 Affected Products

Vehicles

MAKE MODEL YEAR
THOR MAGNITUDE 2019-2020
THOR OMNI 2019-2020

 


10 Associated Documents

Recall Quarterly Report #3, 2020-1

RCLQRT-19V566-1895.PDF 211.314KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.36 KB]

 


Recall Quarterly Report #2, 2019-4

RCLQRT-19V566-9928.PDF 211.229KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.28 KB]

 


Recall Acknowledgement

RCAK-19V566-5829.pdf 244.618KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [238.88 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19V566-3702.pdf 123.144KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [120.26 KB]

 


Remedy Instructions and TSB

RCRIT-19V566-3738.pdf 298.343KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [291.35 KB]

 


Remedy Instructions and TSB

RCRIT-19V566-7847.pdf 745.526KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [728.05 KB]

 


Manufacturer Notices(to Dealers,etc)-RC000171 TMCRV Dealer Letter

RCMN-19V566-1395.pdf 139.669KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [136.40 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-19V566-2498.pdf 125.445KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [122.50 KB]

 


Defect Notice 573 Report

RCLRPT-19V566-6320.PDF 213.963KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.95 KB]

 


Recall Quarterly Report #1, 2019-3

RCLQRT-19V566-3010.PDF 211.125KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.18 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V566&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
Automotive, Marine, Boat, RV Battery Tray - Group 27 Series with Strap, Battery Holder (27 Series)
  • Extreme-duty battery tray for Automotive, Marine, RV batteries
  • Battery Tray is constructed from high impact, heavy polypropylene plastic
  • Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
  • Accommodates 27 series batteries up to 7" x 12.5", Safety Strap and buckle are included.
  • 8 mounting points (4 per long length)
Bestseller No. 2
NOCO BT31S Group 31 Heavy-Duty Battery Tray for Marine, RV, Camper and Trailer Batteries
  • Extreme-duty battery tray for Automotive, Marine, RV batteries and more; designed for a single group 24-31 battery
  • Military grade battery hold-down strap; 42 inches water resistant nylon webbing and heavy-duty buckle withstands a tensile load of over 120 kilograms force
  • Certified and tested; meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications
  • Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure
  • Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
SaleBestseller No. 3
Metal Steel Battery Mounting Box Tray Bracket DIY,Easy Bolt-In Battery Tray,Overall Length - Fits up to a 10.63” × 7.06” × 7.5” Battery, Anti-corrosion, No Rusting
  • 【Powerful Support】 The whole battery tray is made of steel. The steel sheet is connected to the steel sheet, the material is strong and has strong support, can easily carry the weight of the battery
  • 【Longer Life】The battery box has multiple round holes that facilitate air circulation and reduce water retention. The round holes also facilitate heat dissipation, which can improve battery life
  • 【Adjustable Size】The battery tray has adjustable bolts. This battery tray can hold batteries up to 10.63 "L × 7.06 "W × 7.5 "H, so it's compatible with most sizes of batteries. Please make sure that it is compatible with the size of the battery being used before selecting it.
  • 【Easy to install & Wide applications】The Battery mounting box adopts simple bolt-on design, no need to re-solder. Easy to install, easy to disassemble, save more time and money. Can be used in a variety of scenarios, such as car racks, camping, self-built cabins or boat cabins
  • 【More Sately】The surface of the battery bracket adopts flame retardant plastic spraying process, which effectively prevents oxidation, rust and corrosion. The main material of the battery bracket is carbon steel, which has good insulating properties and prevents the spread of battery leakage, providing higher safety.
Bestseller No. 4
NOCO BT27S Group 27 Heavy-Duty Battery Tray for Marine, RV, Camper and Trailer Batteries
  • Extreme-duty battery tray for Automotive, Marine, RV batteries and more; designed for a single group 27 battery
  • Military grade battery hold-down strap; 42 inches water resistant nylon webbing and heavy-duty buckle withstands a tensile load of over 120 kilograms force
  • Certified and tested; meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications
  • Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure
  • Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
Bestseller No. 5
Attwood 9099-5 Battery Tray With Strap, 29/31 Series Battery, 12 7/8-Inches L x 7-Inches W, For Up to 10 1/2 Inches Tall
  • Reliable battery holder that fits into limited spaces
  • Simple to install
  • For 29/31 Series battery up to 10 1/2 inches tall
  • Molded base mounts easily with 4 #10 panhead fasteners
  • Battery remains easily accessible for charging or replacing
Bestseller No. 6
Camco Camper/RV Standard Battery Hold-Down Tray | Holds 24/24M Automotive Batteries | Fits Batteries Up to 11 1/8" L x 6 ¾" W x 8" H (55394)
  • Holds Batteries in Place: Safely holds group 24/24M automotive batteries to prevent movement during transportation
  • Safe and Durable Construction: Constructed of heavy-duty, acid-resistant plastic with stainless steel hardware
  • Fit: Fits batteries up to 11 1/8-inches (L) x 6 ¾-inches (W) x 8-inches (H)
  • Overall Dimensions: 11 9/16-inches (L) x 8 ½-inches (W) x 9 5/8-inches (H)
  • Includes: (1) tray, (2) rods, (1) cross bar and (1) knob
Bestseller No. 7
THEPRO Battery Hold Down Tray Kit, Corrosion-Resistant Steel Storage Battery Holder Adjustable Bracket Clamp for Car, Boat, Marine (23cm Bolt with 28cm Battery Tray)
  • THEPRO Steel Universal Battery Trays have a vinyl coating for rust and corrosion resistance.
  • The groove design prevents the battery from contacting the tray fasteners; the Battery Hold-Down Tray has a solid structure, good load-bearing capacity, and durability. There have 3 choice battery tray sets, please read the description to select the one you need.
  • [27cm J bolt with 34cm Battery Tray Kit] 27cm(10.6inch) J Bolt with Adjustable Hold Down from 146-203mm(Adjusts to suit battery width 146-203mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 4, 24, 27, 29, 31, 60, 74 & 77
  • [23cm J bolt with 34cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 65, 48, 94R
  • [23cm J bolt with 28cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 280mm(11in) Battery tray 7.36 in(187mm) width, 10.94 in(278mm) length, fits group 34, 74, 77, 78, 54, 55
Bestseller No. 8
Universal Battery Tray Hold Down Trunk battery Relocation Box Billet Aluminum 551181 For Optima Race Racing Mount Red Yellow Blue Top 34 34/78 D34 D34/78 34M D34M Battery Mount
  • Application - For Most Car and Truck batteries including the following optima sizes: For Red top: 34, 34R, 34/78 & For Yellow top: D34, D34/78 & For Blue top: 34M, D34M .
  • Package includes: 1*Base plate, 1*Top plate, 3*All-thread hold downs, 3*thread sleeves & 6*Matching nuts.
  • Quality - Made of high-quality aluminum alloy and iron, it is durable, rust-proof, and perfectly protects the battery.
  • Features - Designed to securely mount your battery in your vehicle using sturdy base plates and hold-down plates and includes heavy duty 3/8" hardware.
  • Perfect Design - Bottom tray will accept batteries up to 10.5" Length x 6.95" width x 6.7" height with provided thread sleeves(batteries over 7.4" tall will require longer 3/8-16 all-thread).
Bestseller No. 9
Attwood 9092-5 Battery Tray with Strap, 24/24M Series Battery, 7-Inches L x 11-Inches W, for Up to 10 1/2 Inches Tall
  • Reliable battery holder that fits into limited spaces
  • Simple to install
  • designed to hold a 24/24M Series battery up to 10 1/2 inches tall
  • Molded base mounts easily with 4 #10 panhead fasteners
  • Battery remains easily accessible for charging or replacing
Bestseller No. 10
NOCO BT24S Group 24 Heavy-Duty Battery Tray for Marine, RV, Camper and Trailer Batteries
  • Extreme-duty battery tray for Automotive, Marine, RV batteries and more; designed for a single group 24 battery
  • Military grade battery hold-down strap; 42 inches water resistant nylon webbing and heavy-duty buckle withstands a tensile load of over 120 kilograms force
  • Certified and tested; meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications
  • Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure
  • Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...