“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10162016
Manufacturer Communication Number: 167-R1906-01
Summary
Software updates are required for the Engine ECU (Engine Control Unit) and DCU (Dosing Control Unit) modules.
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
HINO | J05C ENGINE |
SEOCONTENT-START
EMISSIONS RECALLCAB OVER ENGINE (COE) ECU AND DCU SOFTWARE UPDATE CAMPAIGN NO: AADK0DATE: 6-20-2019REFERENCE: QA-190618-N1
SUBJECT VEHICLES: 18MY-19MY COE trucks equipped with a J05 engine
Note: Refer to the appropriate Vehicle Identification Number in the warranty system to determine vehicle eligibility.
5. Handling of Dealership Inventory
Under 40 Code of Federal Regulations §1068.101, a dealer cannot sell, offer for sale, or introduce or deliver for introduction in interstate commerce a new motor vehicle when it is aware that the vehicle does not comply with an applicable Federal Motor Vehicle Safety Standard or contains a defect related to motor vehicle safety. A civil penalty of up to $44,539 may be assessed for each engine or piece of equipment in violation. In addition, 49 Code of Federal Regulations §577.13 requires us to provide the following advisory: It is a violation of
Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied.
We request your assistance to ensure involved vehicles are identified and not delivered prior to performing the remedy.
OVERVIEW:
Software updates are required for the Engine ECU (Engine Control Unit) and DCU (Dosing Control Unit) modules. These updates are intended to address the following items.
1) SCR (Selective Catalytic Reduction) Feed Back Monitor (P2BAE)
2) DPF (Diesel Particulate Filter) Feed Back Monitor (P24A1 or P24A0)
3) Urea SCR Tank Heater Valve Stuck Open Monitor (P20B2)
4) MIL (Malfunction Indicator Lamp) ON software issue for
DCU; OBD (On Board Diagnostics) Improvement
5) NOx (Oxides of Nitrogen) sensor offset monitor
(P2201)
Hino is using this opportunity to implement OBD improvement items (which are not by themselves recall items) that are included in all affected engines.
<Additional Items>
DPF Over Temperature Monitor (P200C)
All Cylinder Misfire Detection Monitor (P0300)
Misfire Monitor (Conventional vehicles: P0301-P0304)
DOC1 (Diesel Oxidation Catalyst) Over Temperature Monitor (P2428)
SCR Feed Back Monitor (P2BAE)
Reductant Temperature “Too High” Monitor (P24FF)
BEFORE YOU BEGIN:
•
Read and understand all instructions and procedures before you begin the work.
•
Read and follow all NOTICES, WARNINGS, and CAUTIONS set forth in this publication. These alerts help to avoid damage to components, serious personal injury, or both.
•
Park the vehicle on a level and solid surface and apply the parking brake.
•
Confirm the engine is stopped, the starter switch is in the off (LOCK) position, and the key is removed.
•
Wear safety glasses to prevent eye injuries.
•
Place wheel chocks in front of and behind all wheels.
•
NOTICE: Before beginning these procedures, you MUST install a battery charger on the vehicle to ensure battery power does not go low during reprogramming.
•
NOTICE: Before beginning these procedures, you alsoMUST be certain thatthe laptop battery is fully charged, or a remote AC power supply is connected to the laptop to ensure the battery power does not go low during
reprogramming.
VEHICLE PREPARATION:
1. Park the vehicle on a flat, level and solid surface.
2. Confirm the engine is stopped, the ignition switch is in the off (LOCK) position, and the key is removed.
3. Apply the parking brake.
4. Chock all of the wheels.
Engine ECU Software
PART NUMBER
MODEL YEAR
ENGINE SERIES
QUANTITY
89663-E4048
2018 Diesel
J05ETP
As Required By VIN or Higher
89663-E4058
2018 Hybrid
J05EUG
89663-E4645
2019 Diesel
J05ETP
89663-E4655
2019 Hybrid
J05EUG
DCU Software
PC PREPARATION
PC Power Management
CAUTION: Disable the computer features listed below. Failure to disable these features may severely damage the vehicle’s control modules.
1. Screen saver
2. Energy saving features
a. Monitor
b. Hard disks
c. System standby
NOTICE:The illustrations above depict what you will see on your computer screen with regard to the features which must be disabled. The location
on the screen of the features to be disabled will vary, however, based
upon the operating software. Consult your IT
(Information Technology) department as required.
DCU & ECU REPROGRAMMING PROCEDURE
CAUTION: Two modules will be reprogrammed during this procedure. A battery charger MUSTbe installed on the vehicle to ensure battery power does not go low during reprogramming or damage to these modules may occur. DO NOTstart the procedure without the battery charger being installed.
1.Prepare a DXII compatible interface, such as the Denso DST-ior the NexiqUSB Link 2 to perform this reprogramming procedure.
To assemble the interface cable, perform the following steps.
(1) Connect the DLC (Diagnostic Link Connector) cable to the interface.
(2) Connect the USB Cable to the interface.
(3) Connect the USB connector to the USB port on your computer.
2.Connect the DLC cable to the vehicle’s DLC connector. The DLC connector is found under the dash on the left side of the steering column.
3.On your computer, locate the “Hino DX2” icon and open it.
4.Hino DX2 will prompt you for a “User ID” and “Password”. Enter your User ID-, and password and then select the “Login” icon. Verify that the DX2 has software version 1.1.19.6 or later.
5. Insert the ignition key into the starter switch and turn the key to the “ON” position.
6. Select the “Reprogramming” icon.
7.Select “300 Series” under the “Vehicle Classification” drop down menu.
8. Select “DCU (Doser)” under the “System Classification” drop down menu and then select the “OK” icon.
9. Follow the prompts to update the DCU to the latest software level using the Hino Diagnostic eXplorerII (Hino DX2). Refer to the following table for the appropriate software part number for the application.
DCU Software
10. Once DCU reprogramming is complete, turn the starter switch to the “LOCK” position and remove the key for one minute.
11. After waiting at least one minute, insert the ignition key into the starter switch and turn the key to the “ON” position.
12. Again, select the “Reprogramming” icon.
13.Select “300 Series” under the “Vehicle Classification” drop down menu.
14. Select “ECU (Engine J-Series)” under the “System Classification” drop down menu and then select the “OK” icon.
15. Follow the prompts to update the ECU to the latest software level using the Hino Diagnostic eXplorerII (Hino DX2). Refer to the following table for the appropriate software part number for the application.
ECU Software
16. Once ECU reprogramming is complete, turn the starter switch to the “LOCK” position and remove the key for one minute.
17. After waiting at least one minute, insert the ignition key into the starter switch and turn the key to the “ON” position.
18. During ECU software reprogramming, other DTC’s may have been set. These DTC’s will need to be cleared, in the manner indicated in steps 19-22, prior to completing this emission recall. Select the “Diagnosis” icon.
19. Check mark the “Device Classification”. This should automatically check mark the remaining devices. Select the “Read Out” icon.
20. Select the “Delete All” icon.
21. Select the “Delete” icon.
22. Select the “OK” icon.
23. From the Engine ECU Data Monitor and Active Test menu, select Active Test Setting>Urea SCR Related Memory Reset> then follow the prompts to complete the reset.
24. Select the “New Diagnosis” icon.
25. Select the “OK” icon.
26. Turn the starter switch to the “LOCK” position and remove the key.
REPAIR LABEL INSTALLATION PROCEDURE
Once all above steps in this recall procedure have been completed, apply a recall label to the left door jamb above the VIN label. Fill in the Campaign No, Dealer code, and Repair date. Proceed to the Final Inspection Procedure, below.
CALIFORNIA VEHICLES ONLY:
When an Emissions Recall is performed by a California Dealer a “Proof of Correction” certificate must be completed and provided to the vehicle owner to submit to the California Department of Motor Vehicles if requested during vehicle registration. If the “Proof of Correction” certificate is not provided, an owner may not be able to renew the vehicle registration. If not requested by the DMV, the form should be retained for the Owner’s records. A downloadable form can be found on Hinonet/ Service/ Print Forms under the description “Proof of Correction”.
FINAL INSPECTION:
•
The Engine DCU and ECU module software were updated to the latest levels as outlined by this recall procedure.
•
When reprogramming, DTC’s may have inadvertently been set. Make certain that all codes logged as a result of the ECU reprogramming have been cleared from the Engine ECU, Transmission ECU, ABS ECU and DCU prior to releasing the truck back to the customer.
•
The Urea SCR Related Memory Reset was performed.
•
The recall label was installed on the door jamb.
CLAIM APPLICATION
COE DCU and ECU Reprogramming:
a) Campaign No: AADK0
b) Labor charge: Reprogram ECU/DCU 1.2 hrs.
c) Warranty code: 86311
d) Trouble code: 98
e) Operation code: 86350AOT
f) Original failed part: 9999999999
CAMPAIGN NO: AADK0
DATE: 6-20-2019
REFERENCE: QA-190618-N1
https://www.nhtsa.gov/recalls?nhtsaId=10162016
https://static.nhtsa.gov/odi/tsbs/2019/MC-10162016-0001.pdf
Heavy Duty Truck Reprogramming
Description:
Designed for flexibility, the USB-Link 3 Wired Edition connects to your PC, tablet, or smartphone with a USB cable, allowing techs to directly connect to a device when working in the field or during signal interruptions.
Built to support the latest protocols (CAN FD, DoIP) and compatible with a wide range of OEM diagnostics software, the USB-Link 3 is our most advanced VCI to date, with the performance and technology you can rely on well into the future.
The USB-Link™ 3 comes with the following:
- Latching USB Cable (PN 404032)
- 9-Pin Deutsch Adapter, 1 Meter (PN 493128)
- J1962 Adapter (16-Pin OBD II, 1 Meter (PN 491113)
The USB-Link™ 3: Wireless is also available (PN 121052).
Specifications
Vehicle Network Protocol Support
CAN FD / J1939 FD / ISO15765 FD - 250K, 500K, 1M b/s with auto baud detection
Single wire CAN (SWCAN)
ISO 11898-3 Fault Tolerant CAN (FTCAN)
Diagnostics Over Internet Protocol (DoIP)
J1850 VPW (Class 2)
ISO PWM (SCP)
ISO 9141 / KWP2000 (ISO 14230) K/L line
ALDL 9600 and 8192 baud
ATEC 160 baud
Windows® Vehicle Communication API
Windows® Vehicle Communication API
RP1210 a/b/c
J2534 (2004 draft)
J2534-1 partial implementation (commercial vehicle focused)
Operating System Compatibility
iOS
Android™
Windows® 10, 11
Interfaces to Computing Platforms
USB 2.0 (vehicle-to-PC connectivity)
Bluetooth® 2.1 + EDR
Wi-Fi (dual band)
Compatible Software
Detroit Diesel Diagnostic Link
CAT Electronic Technician (On-Highway only)
Cummins Insite
International - ServiceMAXX Fleet Pro
Hino eXplorer
Volvo PTT
V-MAC Service Tools
Allison DOC® For PC-Service Tool - Protocols Supported: J1939, J1708/J1587, and J1850
Allison DOC® For Fleets (1000/2000) - Protocols Supported: J1939, J1850
Allison DOC® For Fleets (3000/4000) - Protocols Supported: J1939, J1708/J1587
Eaton ServiceRanger
Bendix ACom
WABCO Toolbox
Freightliner ServiceLink
International DLB
International Intune
International IPC v2.02
PACCAR DAVIE4
Diesel Laptops Nexiq USB Link 3 Wireless Edition with Repair Information & Diagnostic Software | |
Diesel Laptops Nexiq USB Link 3 Wired Edition with Repair Information & Diagnostic Software |
Nexiq Blue-Link Mini Product Number NQ126015 Nexiq Blue Link Mini™ Vehicle Communication Interface |
NEXIQ Technologies 124032 USB-Link 2 Connector | |
Dearborn DPA5 Pro Universal RP1210 Protocol Adapter |
Daimler Truck
DiagnosticLink Order Site:
DiagnosticLink Direct Link:
https://diagnosticlink.nexiq.com/DTNA/Default.aspx
- 🍇➤Please Note: 1. The HD OBD option is available for heavy truck owners and the OBD/EOBD option is available for other vehicle. 2. Owners need to fix the problem with the truck first before they need clear the error code.
- 🍉➤【Support Full Systems for Heavy Duty Truck】 NL102 PLUS supports read and clear DTC, live data, ECU information for truck all systems. Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more, which are in compliance with J1939, J1708 and J1587 protocols, It includes almost American HD trucks(Class4-Class8), it is recommended that customers confirm before purchase that if they comply with the years and agreements supported by NL102P before purchasing.
- 🍋➤【Professional DPF Regeneration Tool】Force DPF Regen work on Cummings, Detroit, Maxxforce, ISUZU, HINO engine,It covers almost all US trucks, supported advanced features: DPF Regeneration,D-O-C Cleaning Procedures, DPF Regeneration in Parking, DPF Regeneration in Driving, DPF Onboard. NL102P's tool helps you re-awaken the engine power When the diesel p-articulates of the engine accumulate. It will save $800-$2500 for truck owners a year.
- 🍊➤【Excellent Oil Light Reset】NL102 PLUS support Oil service reset work on Cummings, Detroit, Maxxforce engine. when the replacement of engine oil is done, the truck system calculates when to change the engine oil and filter based on vehicle use. An oil change is required whenever indicated by the display, otherwise it will affect the engine maintenance and life. The NL102P truck scanner offers help to reset the Oil Life Reminder (Determine the Oil Service Light), ensure your driving safety.
- 🍐➤【All OBD/EOBD Diagnosis】NL102 PLUS supports both all 12V and all 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. NL102 PLUS can read and earse the trouble codes, determine the MIL (check your Truck engine) and I/M Readiness, Freeze Frame, Live Data, O-xygen Sensor Test, On-Board Monitor, Vehicle Identification Info. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair. In order to ensure that you can use the NL102P, please check the manual before purchasing.
- 🔥🔥🔥2024 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD heavy duty truck scan tool 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>40+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
- 🚛Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch diesel truck scan tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- 🚛40+ Reset Functions & Bidirectional Control - 2024 newest top truck scanner diagnostic tool, comes with 40+ special services (ECU, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel scanner diagnostic tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD truck scanner not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, EGR valve testing,Off-cylinder test and learning functions.
- 🔥2024 TOP INTELLIGENT DIAGNOSTIC SCANNER FOR SEMI COMMERCIAL: ANCEL V5 HD obd2 scanner is specifically designed for 12V & 24V semi trucks,pickup trucks,heavy-duty trucks and 99% of commercial vehicles.you will enjoy✅All System Diagnostic;✅40+ Special Functions;✅ Full Bi-directional Test; ✅Advanced ECU Coding;✅Exclusive Remote Diagnosis Assistance;✅Full System Diagnostic ;✅Wider Vehicle Coverage;✅ Full HD OBD /OBDII /EOBD Modes;✅Top-level Hardware;✅>2 Yrs Free Update,Lifetime Tech Support
- 🚚40+ Resets with ABS SRS DPF Regen: ANCEL V5 HD includes 40+ resets for various systems, including ABS, SRS, DPF, EPB, BMS,DPF Regen, Injector Coding,Parameter Setting,Idle Speed Adjustment, Speed Limit Adjustment and more to fully meet your various needs. These resets can help reset the vehicle's systems to their default settings, eliminating any error codes or malfunctions that may be causing problems.Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛FULL BI-DIRECTIONAL CONTROL, GET YOU TO MALFUNCTIONS DIRECTLY:ANCEL V5 HD bidirectional scan tool supports bidirectional testing, which means it can both read and erase fault codes from the vehicle's ECUs.This feature saves time and money by eliminating the need for multiple scanners or tools.you can quickly identify whether the repair job works or not:Aftertreatment Test, Injector Test,Fuel Pump Test,Cylinder Test,Enigne State Monitor,A/C Compressor Test,Heated Oxygen Sensor Test and more.
- 🚜ADVANCED ECU CODING & PROGRAMMING:ANCEL V5 HD diesel truck scan tool comes with a powerful ECU programming and coding function, allowing you to reprogramme and decode the electronic control units (ECUs) of the vehicle.This feature is especially useful for technicians who need to update software,adjust parameters,or perform other modifications to the vehicle's electronic systems.🚦Note: ECU Coding is not universal to all cars, please check compatibility with VIN before order.
- 🚌OE-Level Full System Diagnostic:ANCEL V5 HD code reader is a professional-grade truck scanner that covers almost all the systems in semi-commercial vehicles, including engine, transmission, ABS, SRS, airbag,instrument panel, etc.It provides accurate and comprehensive diagnostic results,helping you quickly identify and solve vehicle problems,which are in compliance with J1939, 1708,ISO14230,ISO15765,ISO9141,ISO11898,E-J1850 VPW,SAE-J1850 PWM,J1587,CAN TP16,CAN TP20,AN-FD,and DOIP protocols.
- Powerful and Cost-Effective - An essential heavy duty truck scanner designed for heavy duty truck owner-operators and small commercial fleets. With the Diesel Decoder, just plug the diesel scan tool into the diagnostic port and pair with the free smartphone app to access in-depth HD diagnostic information.
- Swift and Adaptable - This heavy duty truck scanner recognizes both diagnostic trouble codes (DTCs) and brand-specific error codes for prevalent heavy-duty truck brands in North America, such as Freightliner, Peterbilt, Mack, Kenworth, Volvo, Western Star, among others and give the ability to perform DPF regens on select model years of Cummins, International, Detroit, Isuzu, Paccar, Mercedes, Hino and Mack/Volvo.
- Instant Repair Help - The diesel scan tool seamlessly connects to the Diesel Laptops comprehensive Diesel Repair Platform library so you can immediately start diagnosing and repairing any problems and get back on the road as soon as possible.
- Continuous Enhancement - Benefit from direct feature additions and updates via the app, our heavy duty truck scanner will continue to have functionality added over time. This removes the hassle of lengthy update processes and the financial strain of renewing costly diagnostic gear.
- 🚛【2024 Most Professional DPF Regen & Reset Tool】F802 heavy duty truck code reader support fully exclusive OEM-level DPF functions fit for Cummins, Detroit, Caterpillar, International, Volvo, Isuzu, Fuso, Hino. F802 diesel scanner diagnostic tool can perform DPF regen, DPF reset, DPF related information reset, DPR state reset, DPD forced regen, Forced DPR Regen, Ash Service Regen, Reset the soot level, etc, to make your truck breathe smoothly and recover power performance quickly.
- 🚛【Available for Cummins】F802 heavy duty truck scanner support full systems diagnosis, alll basic functions and dpf regen & reset for Cummins engine: ISB/ISD/ISL/ISG/ISX/ISC/ISF/ISM/ISBe/QSM11/ISM/QSX15/ISC/ISN/ISK/X12/X15/L9/B6.7/L9N/QSB,etc. F802 heavy duty scanner support vehicle models like Freightliner/Kenworth/International/Peterbilt/Volvo Truck/Western Star/Kenworth/Autocar/Western Star Mack/Ford/Autocar/RAM/Terex/Bluebird and more.
- 🚛【Available for Caterpillar & International】F802 heavy duty truck scan tool fit for Caterpillar engine: C7/C9/ C11/C13/C15/C32; Support Caterpillar 320D/320E/312E/312F, Ford Pick-up F-650/750, Freightliner M2/Argosy, Peterbilt 379/387/385/378/357, Kenworth C500, etc. F802 heavy duty code reader can work on International engine: MaxxForce 5/7/11/13/15/DT9/DT10, International A26; Support international HV/HX /LT/RH Series, DuraStar/WorkStar/CXT and more.
- 🚛【Available for Detroit & Paccar】F802 heavy truck scanner can work on Detroit engine: Series 50/55/60, MBE 900/4000, OM501/502, DDDL 6/7, DD5/8/13/15/16; Support Freightliner: Cascadia/M2/M2 106 Plus/M2 112 Plus/108SD/108SD Plus/114SD/114SD Plus/122SD, Western Star: 4700/4800/4900/6900, 47X/49X/57X/X-Series. F802 diesel code reader fit for Paccar engine: PX-7/PX-9, MX-11/MX-13; Support Kenworth K270E/K370E/W990/T180 - T880, Peterbilt 579/389/567/367/365/548/535/536/537/220, ect.
- 🚛【Available for Volvo & Hino】F802 dpf regen tool is compatible with Volvo engine: Volvo(J1708), Volvo(500K) ( D11, D13, D13TC); Support Volvo HD truck FM7/9/10/12, FH12/16/565, FH16, FL10/FL12/FL6/FL7, NH12/535/565, F10/12/16. F802 diesel obd2 scanner can work on Hino engine: A09C/J05E/J05C/J05D/J07E/J08E/S05C/N04C/N05C/A09C/E13C/P11C,etc; Support Hino 300/500/600/700, Retro, Hino bus, Hino Coach, Hyundai, KATO, Kobelco, Takeuchi, etc.
- 🔎【Comprehensive Full Systems Diagnostic Tool For Truck】Launch Heavy Duty Truck Diagnostic Tool offers OE-Level diagnosis for all systems of heavy truck/Pickups/Bus/Van in compliance with OBD-II Communication Modes 1-10 and J1587, J1708 and J1939 protocols,Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more.
- 🔥【All OBD/EOBD Diagnosis】This truck scanner diagnostic tool supports both most 12V and 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. Our truck scan tool can read codes, erase codes, I/M Readiness, Live data, EVAP Test. . . etc for obd2/eobd cars. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair.
- 🚚【Wide Truck Applications】Heavy duty truck scan tool covers almost J1587, J1708 and J1939 protocols heavy duty trucks and OBD II vehicles. Such as Cummins, Paccar, Detroit, Perkins, International, Peterbilt, Allison, Eaton, Ford duty trucks and so on, Covers class 4 (14,001 lbs) through class 8 (33,000 lbs and over) heavy duty trucks. One that meets all the requirements! NOTE:Compatibility will vary on vehicles model and year, please send V-IN to check the compatibility before purchase.
- 💡【Friendly Design, Easy of Use】This heavy duty diagnostic scan tool is plug and play, simple and convenient, The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- ✨【3 YEARS WARRANTY & FREE LIFETIME UPDATES】The diesel truck scanner is exclusively designed for US truck. it's come With a full service functions and full systems and provides 24/7 technical support, 3 years warranty, 90-days free return for refund or replacement. This diesel scan tool is suitable for auto repair shops and technicians.No subscription fee and free lifetime updates.
Last update on 2024-03-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.