| “This site contains affiliate links for which OEMDTC may be compensated” |
June 26, 2019 NHTSA CAMPAIGN NUMBER: 19V492000
Inactivity of Remote Causes Engine Shutdown
An unexpected engine shut down can increase the risk of crash.
NHTSA Campaign Number: 19V492
Manufacturer Jerr-Dan Corporation
Components ENGINE
Potential Number of Units Affected 33
Summary
Jerr-Dan Corporation (Jerr-Dan) is recalling certain 2018-2019 Heavy Duty Wrecker vehicles equipped with the optional recovery remote control. If the remote and control system switch is not turned off by the operator, after three minutes of remote inactivity, the truck’s engine may unexpectedly shut down.
Remedy
Jerr-Dan will notify owners, and dealers will reprogram the remote, free of charge. The recall began August 15, 2019. Owners may contact Jerr-Dan customer service at 1-800-926-9666.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
JERR-DAN CORPORATION
13224 FOUNTAINHEAD PLAZA
HAGERSTOWN, MD 21742
1-800-926-9666
www.jerr-dan.com
IMPORTANT SAFETY RECALL NOTICE
Attn: Jerr-Dan Product Owner
Date: August 15, 2019
Reference Number: 19V-492
| Re: | Heavy Duty Wrecker |
| Subject: | Software Update on Portable Control Unit Transmitter |
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
REASON FOR THIS RECALL
Jerr-Dan Corporation has decided that a defect, which relates to motor vehicle safety, exists in certain model year 2018-2019 Heavy Duty Wreckers manufactured May 9, 2018 through June 4, 2019. The defect exists in the optional portable control unit transmitter, “remote”, see figure #1. Jerr-Dan has determined that if the remote and the control system switch are both not turned off, after 3 minutes of inactivity of the remote the truck engine will shut off. There is an increased risk of a crash if the truck engine shuts off while driving. This Recall must be completed on all affected units.
Figure #1
WHAT SHOULD YOU DO?
Please remove the remote from the wrecker as soon as possible, fill out the attached Portable Control Unit Reprogram Form. This form will include shipping instructions and attached is a prepaid UPS shipping label (overnight shipment) to return the remote to Jerr-Dan. Jerr-Dan will reprogram the remote (approximately 10 minutes) and immediately reship (overnight shipment) it to the address provided on the form.
Jerr-Dan is best equipped to upgrade the software in your remote. For any questions regarding the timing of the software update, please contact the Jerr-Dan Product Safety and Reliability Department by:
Email: productsafety@ierrdan.com
Telephone: 1-800-926-9666
After contacting the Jerr-Dan Product Safety and Reliability Department, if you are still not able to have the safety defect remedied without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, DC 20590 or call 1-888-327-4236 (TTY: 1-800-4249153); or go to https://www.safercar.qov
If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of shipping the remote. For more information please contact JerrDan at:
Email: productsafety@ierrdan.com
Telephone: 1-800-926-9666
Owner Verification:
An Individual Serial Number List is enclosed, indicating Heavy Duty Wrecker(s) that you own according to Jerr-Dan records. Please review and verify your ownership of the units on the enclosed Individual Serial Number List. If the information specified on the Individual Serial Number List is incorrect, immediately complete the enclosed Owner Update Form for each incorrect unit and send the updated information to Jerr-Dan in accordance with the instructions on the form. Jerr-Dan will then contact the new owner of the wrecker.
Federal law requires any lessor who receives a notification of a determination of a safety-related defect or noncompliance pertaining to any leased motor vehicle shall send the notice to the lessee within 10 days.
We are sorry for any inconvenience. However, we have taken this action in the interest of your safety and continued satisfaction with our products.
Jerr-Dan Corporation
Product Safety and Reliability Dept.
Enclosures:
Portable Control Unit Reprogram Form
Pre-Paid UPS Shipping Label
Owner Update Form
Individual Serial Number List
SEOCONTENT-START
Safety Recall Notice #19V-492
Master Serial Number Listing
0230005917
0230005952
0230005986
0230006118
0230006135
0230006150
0230006168
0230006217
0230006245
0230006298
0230006299
0230006352
0230006413
0230006487
0230006488
0230006575
0230006619
0230006645
0230006646
0230006703
0230006761
0230006762
0230006790
0230006843
0230006844
0230006869
0230006893
0230006919
0230006989
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| JERR-DAN | HEAVY DUTY WRECKER | 2018-2019 |
7 Associated Documents
Recall Quarterly Report #2, 2019-4
RCLQRT-19V492-5425.PDF 211.228KB
Loading...
Reload document 
Open in new tab
Recall Quarterly Report #3, 2020-1
RCLQRT-19V492-2029.PDF 211.309KB
Loading...
Recall Acknowledgement
RCAK-19V492-5274.pdf 245.258KB
Loading...
Defect Notice 573 Report
RCLRPT-19V492-7487.PDF 213.487KB
Loading...
Recall Quarterly Report #1, 2019-3
RCLQRT-19V492-3234.PDF 211.123KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-19V492-3549.pdf 914.318KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-19V492-6061.pdf 247.648KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V492&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
- Free Wheeling
- Moving Parts.
- Package Dimensions: 8.8 L X 28.4 H X 11.9 W (Cm)
- Product Type:Non Riding Toy Vehicle
- Pack Size: 2 Pack
- Underlift Tie Down Strap 4" Heavy Duty
- Working Load Limit: 5,400 lbs
- Weight: 8.4 lbs
- Strap Width: 4", Length: 65"
- Color: Green
- Length: 8'
- Vertical Style Rated Capacity: 5,300 lbs
- Choker Style Rated Capacity: 4,200 lbs
- Basket 90 degree Rated Capacity: 10,600 lbs
- 【Rapid Pallet Removal】: VEVOR pallet buster adopt the articulating pivot-action head design to prevent wood from breaking and splitting, which can be used for pallet removal, decking, docking board removal for replacement or reuse, and it can remove most pallets in less than five minutes.
- 【No Installation, Universal Size】: One-piece handle, no assembly required, ready-to-use for straightforward pallet removal work. Pallet removal tool has an overall length of 45 inches and the forks measure 8.07 inches long x 0.78 inches wide, prying the pallet allows you to fit the forks completely under the plate with 5 inches of space between the forks, fits most pallets.
- 【Durable】: VEVOR deck board removal tool is designed with extra welded areas for stability and sturdiness, and can withstand loads of up to 2,000 lbs. 100% made of carbon steel, durable and rust-resistant, and weighs just 10.58 lbs, making it easy to dismantle pallet and use.
- 【Grip Comfort】: The 41” handle allows you to stand as you're breaking things apart or lifting something from the floor, which will help protect your back. 4.7-inch non-slip handle protector for increased friction and better removal work.
- 【Save Time and Easy to Use】: Simply slide the pallet breaker tool between the boards and apply pressure to the handles. Easily remove boards, planks and break down pallets. No more hammers and crowbars to take apart those pallets!
- 【High-Quality Pallet Bar Tools】: The pallet buster is made of good workmanship with long and high-quality steel straight heavy tube handle, which is not easily bent or broken when prying, cover with blue powder coating, and one-piece smooth welding for strength and durability.
- 【Integrated Welding Anti-Fracture】: The handle and the crowbar head are welded in one piece, and the welding connection has been specially flattened to greatly increase the stress strength, and will not break and bend.
- 【Heavy-Duty Action Head】: The pallet bar is designed with an articulating pivot-action head for multipurpose use in disassembling a pallet, deck, or dock board that will not break or split the wood and improving the value of lumber recycling.
- 【Perfect Using Dimension】: For standard pallets; this pallet ripper can straddle a board up to 3.6 inches (9.4cm) wide; 3-5/8 inch inside diameter (ID) between pallet pry bar legs; To remove boards on narrowly-spaced pallets planks, this pallet breaker tool includes leveling-type heads with a rocker design to successfully reach between the planks
- 【Effortless Grip Comfortably】: Save your back, and your arms, with this pallet pry bar tool as it has an extra-long handle to efficiently transfer leverage; a rubber grip end cap.
- Forged J Hook with Chain Link
- Size: 15" Forged J Hook
- Working Load Limit: 5400 Lbs
- Capacity: 16,200 Lbs
- Up to 30 Hour Run Time!!! The TM48XR with Lithium battery is the Next Generation of Wireless Tow Lights.
- 48" Long Wireless tow light has LED Stop, Tail, Turn, Triple ID Lights
- Comes with 7 pin round (big truck) plug in transmitter (let us know if you need a different plug).
- Up to 1000' Range
- Durable PVC Housing attaches with rubber straps (see our other listings for magnetic lights)
- 🟠【SPECIFICATIONS】This 2-pack includes two rugged 8-inch J hooks forged from G70 steel with attached chain links. Each industrial-strength J hook is rated for a working load limit of up to 5,400 pounds.
- 🟠【STRONG CARRYING CAPACITY】Perfect for replacing worn J-hooks or assembling your own custom chains, these rugged 8'' J-hooks are built to last. Great quality for all your heavy-duty needs.
- 🟠【RUGGED AND DURABLE】Constructed from rugged G70 steel with gold plating, these heavy-duty J hooks with chain links are built to last. The corrosion-resistant gold coating and high-strength steel provide exceptional durability to enhance longevity and service life.
- 🟠【EASY TO USE】For safe and easy use, center the vehicle properly in the hitch, avoiding any side leaning or load. Simply attach the hook to the vehicle's axle - never the rear or front bumper. This ensures the vehicle is secured correctly for hassle-free towing.
- 🟠【VERSATILE USE】These J-hooks can be installed on the axles of all types of vehicles, including tractors, trucks, heavy trailers, and more. Their universal design works for a wide range of axle sizes and applications.
Last update on 2024-06-22 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.