| “This site contains affiliate links for which OEMDTC may be compensated” |
March 5, 2019
Without the parking brake being engaged, the vehicle may unintentionally move, especially when parked on an incline, increasing the risk of a crash.
NHTSA Campaign Number: 19V175
Manufacturer Entegra Coach
Components PARKING BRAKE
Potential Number of Units Affected 23
Summary
Entegra Coach (Entegra) is recalling certain 2019 Esteem motorhomes. The parking brake cable ends may be too small, allowing the cable to disconnect, preventing the emergency brake from engaging.
Remedy
Entegra has notified owners, and dealers will replace the parking brake cable, free of charge. The recall began March 15, 2019. Owners may contact Entegra customer service at 1-800-517-9137. Entegra’s number for this recall is 9903428.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
| “This site contains affiliate links for which OEMDTC may be compensated” |
Park Brake Cable
| Bulletin Type: | Safety Recall | Publication Date: | 2019 |
| Recall #(s): | Jayco 19V-174 Entegra 19V-175 | Make(s): | Jayco/Entegra |
| Job Code(s): | 9903428 | Model(s): | Greyhawk Redhawk Esteem |
| Flat Rate(s): | 1 hour | Model Year(s): | 2019 |
REQUIRES PARTS KIT
| Incident: | Park Brake extension cable can slip out of the retainer clips causing park brake failure. |
| Affected Units: | 2019 Greyhawk
K1 MF0116-0126 MV0310-0317, 0320-0322, 0325-0328, 0331 MX0201-0210 MZ0179-0186 2019 Redhawk K1 XF0099-0102, 0106, 0108 2019 Esteem K1 BF8062, 8063, 8066, 8068 BV8165-8166 BX8119-8124 |
| Parts Kit: | Parts Kit #: 19V-174 |
| Parts Kit Contents:
1 – brake cable 2 – brake cable retainers |
|
| Misc. Tools & Supplies: | 2 pairs of 7″ vice grip pliers |
| Parts Return Information: | Not applicable |
REPAIR INSTRUCTIONS
FIG 1 Brake cable runs along the frame rail on driver side (circled area).
FIG 2 Rear cable clip is located forward of the rear wheels and near a ground cable connection to the frame.
FIG 3 Front cable clip is located rearward of the front wheels and just behind a bracket on the frame rail. FIG 4 Clamp a pair of vice grips on the rear cable retainer as shown in this photo.
FIG 5 Clamp a second pair of vice grips next to the first pair as shown here.
FIG 6 Pull the vice grip pliers in the directions shown by the arrows to spread open the cable retainer.
Pulling them in opposite directions will allow the cables to fall out of the retainer. The retainer will not be re-used.
FIG 7 Rear retainer after being spread apart showing rear cable being removed.
FIG 8:
- Spread the front retainer using the same procedure outlined in Fig 6.
- Pull both cables out of the old retainer.
- Remove the old extension cable and discard it along with the old retainers.
FIG 9 & 10:
FIG 11:
- Route the new extension cable from the kit, through the cable holder which is welded to the frame Make sure the cable end with the white tape (circled) is toward the front of the vehicle.
- The white tape is for inspection purposes. If you look under the front of the vehicle the white tape is easily spotted and identifies the unit as having had the repair.
FIG 12:
- At the front of the vehicle insert the front brake cable into a new retainer from the kit.
- Insert the replacement extension cable from the kit into the same retainer as the front brake cable.
- The end with the white tape should be inserted in this retainer.
FIG 13:
- Inserting the new cable into the rear retainer may require the help of a second person as the cable fits very tight.
- The second person pulls the front brake cable (toward the rear of the vehicle) to get enough slack in the cable for the person at the rear to put both cables in the rear retainer.
FIG 14:
- Cables now must be seated into the retainers.
- Grab the rear brake cable just behind the rear retainer, and FIRMLY pull the cable out towards the driver side of the vehicle about a foot or so (in direction of the arrow). This will seat the cable ends into the retainers.
- Release the cable to its normal position and inspect the cable ends in the retainers.
- The cable ends should not be loose in the retainers but be held firmly in place.
TESTING THE PARKING BRAKE:
Proper operation and function of the park brake must now be validated.
These validation steps are part of the Recall Remedy and must be performed.
- First: Validate the park brake operation by pulling the park brake to engage it and then pressing the release and pushing it back to the stowed position. Do this several times and insure the Instrument Panel shows the park brake is set. Observe the force required to operate the parking brake. Force required cannot exceed 125 pounds for a hand- operated system
- Secondly: Validate the park brake engagement can hold the vehicle.
- Engage the parking brake. o With your foot on the brake pedal, start the vehicle, move the gear shift to the Drive position.
- Slowly release pressure from the brake pedal to see if park brake functions properly (holds the vehicle stationary).
- If the park brake does not prevent the vehicle from moving STOP!
- Return vehicle to park position, shut off the engine and remove the keys from the ignition.
- Re-inspect park brake cable routing, retention clips and cable tension.
- Contact Jayco Customer Service if park brake continues to function improperly and/or if further guidance is required.
Safety Recall: Jayco 19V-174
Entegra 19V-175
March 2019
IMPORTANT SAFETY RECALL
This Notice Applies to Your Recreational Vehicle:
Dear Valued Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco has decided that a defect which relates to motor vehicle safety exits in certain Model Year 2019 Jayco Greyhawk, Redhawk and Entegra Esteem Class C motorhomes.
| Reason for this recall | The parking brake cable may slide through the retaining brackets when the park brake is engaged, causing park brake failure. Failure may not be immediate, but fail after several engagements. If the park brake does not engage, the vehicle may not stay stationary as required on an incline. This could result in personal injury and /or property damage. |
| Recall Remedy | An authorized Jayco Dealer will remove and replace the parking brake cable free of charge. The Recall Remedy will take approximately 1 hour. |
| What we need you to do | Please contact a Jayco Authorized Dealer as soon as possible to schedule an appointment to have this remedy completed. Use caution when engaging the park brake prior to completion of the recall remedy. |
If you had this repair completed prior to receipt of this recall notice, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall.
If you take your recreational vehicle to your dealer on the agreed service date and the dealer does not remedy this condition on that date or within three (3) days, please contact our Customer Service Department at 800-517-9137 If after contacting your dealer and Customer Service you are not able to have the safety defect remedied without charge and/or within a reasonable time, you may wish to submit a written complaint to the Administrator, national Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-3274236 (TTY: 1-800-424-9153): or go to https://www.safercar.gov. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We certainly regret this inconvenience; however, your safety is our most important priority.
Sincerely,
Jayco Motorized
Safety Recall: Jayco 19V-174
Entegra 19V-175
March 2019
IMPORTANT SAFETY RECALL
Dear Valued Dealer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco has decided that a defect which relates to motor vehicle safety exits in certain Model Year 2019 Jayco Greyhawk, Redhawk and Entegra Esteem Class C motorhomes.
| Reason for this recall | The parking brake cable may slide through the retaining brackets when the park brake is engaged, causing park brake failure. Failure may not be immediate, but fail after several engagements. If the park brake does not engage, the vehicle may not stay stationary as required on an incline. This could result in personal injury and /or property damage. |
| Recall Remedy | Remove and replace the parking brake cable. |
| All pertinent information regarding this recall is available under the Service and Parts Tab of our Website. If you need further assistance, please Contact Customer Service at 800-517-9137. | |
| What we need you to do | Our records show the following unit is affected by this recall and is currently part of the inventory at your Dealership. The Recall Remedy must be completed on this unit prior to customer delivery. |
VIN
Federal law requires that all units in your inventory be repaired prior to delivery to a customer. If you have sold a unit recently that you have received a stock recall notice on, please contact the owner immediately to advise of the recall. In addition, please register the unit by submitting the Warranty Registration.
We certainly regret this inconvenience; however, our Customers’ safety is our most important priority.
Sincerely,
Jayco Motorized
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| ENTEGRA | ESTEEM | 2019 |
7 Associated Documents
Defect Notice 573 Report
RCLRPT-19V175-9698.PDF 212.818KB
Loading...
Reload document 
Open in new tab
Remedy Instructions and TSB
RCRIT-19V175-5301.pdf 891.277KB
Loading...
Recall Acknowledgement
RCAK-19V175-2293.pdf 245.621KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-19V175-2328.pdf 50.917KB
Loading...
Miscellaneous Document – 19V-174 175 ORDER FORM
RMISC-19V175-6219.pdf 135.245KB
Loading...
Recall Quarterly Report #1, 2019-1
RCLQRT-19V175-4719.PDF 211.121KB
Loading...
Manufacturer Notices(to Dealers,etc) – 194V-174 175 Dlr Ltr
RCMN-19V175-7944.pdf 187.468KB
Loading...
Recall Quarterly Report #2, 2019-2
RCLQRT-19V175-5941.PDF 211.217KB
Loading...
Recall Quarterly Report #3, 2019-3
RCLQRT-19V175-8303.PDF 211.302KB
Loading...
Recall Quarterly Report #4, 2019-4
RCLQRT-19V175-5524.PDF 211.402KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V175&docType=RCL
- Specifically engineered to provide premium performance for everyday driving conditions
- Application specific semi-metallic, ceramic and organic friction materials with First To Market coverage
- Shim materials quiet noise, vibration and harshness
- Consistent fit, form and function including slots and chamfers when designed by Original Equipment
- Abutment clips and integral electronic wear sensors included where applicable
- Asbestos free and made from new steel.Material:Steel
- Secondary post cure and precision cam ground
- Post cured for more brake power and shorter break-in time
- Shoes are Arc Ground for proper fitment
- Superior durability made to last
- SUPER PREMIUM GRADE: Raybestos Element3 Brake Shoes offer super premium replacement brake shoes made with organic materials to ensure the best performance and service life
- NEW STEEL: Premium new steel, either contour or cam ground--depending on the application--facilitates proper shoe to drum contact to ensure great stopping power
- SUPERIOR DURABILITY: Premium dipped coating provides resistance for superior durability and reliability in long term use
- EASY INSTALLATION: Attached levers and hardware included where applicable for easy and complete installation
- VEHICLE FIT: Buick Rainier 2004-2007; Cadillac DeVille 2000-2005, DTS 2006-2011, Escalade 2002-2014, Escalade ESV 2003-2014, Escalade EXT 2002-2013; Chevrolet Astro 2003-2005, Avalanche 2007-2013, Avalanche 1500 2002-2006, Express 1500 2003-2014, Silverado 1500 1999-2013, Silverado 1500 Classic 2007, Silverado 1500 HD 2001-2003, 2005-2006, Silverado 2500 2004, Silverado 2500 HD 2004-2005, SSR 2003-2006, Suburban 1500 2000-2014, Suburban 2500 2003-2005, Tahoe 2000-2014, Trailblazer 2002-2009, Trailblazer EXT 2002-2006
- OPTIMAL BRAKING PERFORMANCE -- OE-matched friction material for optimal brake performance
- MAXIMIZES FRICTION-TO-DRUM CONTACT -- Precision ground material maximizes friction-to-drum contact
- MATCHES OE DESIGN --Attached levers and pins included to match OE (on specific applications)
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- HARDWARE INCLUDED -- Attached levers and pins to match OE are included on select applications
- Direct replacement - this parking brake hardware kit is designed to match the original hardware required to repair the parking brake on specified vehicles
- Ideal solution - this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
- Includes necessary hardware for easy installation
- Thoroughly manufactured to meet your expectations for fit, form, and function
- Country of Origin: Taiwan, Province Of China
- Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
- Manufacturer Part# 1911785 1911594.
- Fitment: Fit for Polaris UTV as Follows ▶ Ranger 500 2010 ▶ Ranger 800 2010-2014 Exclude 6x6, Mid-size Edition ▶ Ranger 800 Crew 2010-2014 Exclude 6x6, Mid-size Edition
- Feature：OEM specifications. Parking Brake Caliper is made of high-quality materials, it is not easily deformed and has a long service life.
- Package：Parking Brake Caliper × 1.
- Service: If there is any product problem within 1 year, please contact us to solve it for you.We provide product service.
- Asbestos free and made from new steel
- Secondary post cure and precision cam ground
- Post cured for more brake power and shorter break-in time
- Shoes are Arc Ground for proper fitment
- Superior durability made to last
- OPTIMAL BRAKING PERFORMANCE -- OE-matched friction material for optimal brake performance
- MAXIMIZES FRICTION-TO-DRUM CONTACT -- Precision ground material maximizes friction-to-drum contact
- MATCHES OE DESIGN -- Attached levers and pins included to match OE (on specific applications)
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- HARDWARE INCLUDED -- OE-style lubricant and abutment clips are included
- Precision engineered OE style design ensures proper fit for a no hassle installation
- 100 percent asbestos-free friction formulations for extended wear, consistent braking performance and long life
- 100 percent all-new steel provides durable construction for long life
- Rust inhibitive coating prevents rust and extends durability
- Set includes brake shoes for 1 axle (2 wheels); Bonded construction; Hardware kit not included
Last update on 2024-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.