Water May Enter Windshield Wire Harness – Wanda Replacement Windshield – 2014-2018 Toyota Highlander

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA Campaign Number: 18E107
Manufacturer Fujian Wanda Automobile Glass Industry C
Components ELECTRICAL SYSTEM, VISIBILITY
Potential Number of Units Affected 8,202

 

Water May Enter Windshield Wire Harness

The ECM damage may result in the engine stalling, increasing the risk of a crash.

 

Summary

Fujian Wanda Automobile Glass Industry (Wanda) is recalling certain aftermarket Replacement Windshields sold for use in 2014-2018 Toyota Highlander vehicles. The windshields have an attached wire harness that water may leak into, possibly causing damage to the vehicle’s Engine Control Module (ECM).

 

Remedy

Wanda will notify owners, and service centers will replace the windshields, and inspect the ECM for damage, having it replaced, as necessary, free of charge. The recall began January 29, 2019. Owners may contact Wanda customer service at 1-864-281-2760.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


IMPORTANT SAFETY RECALL
(NHTSA Recall 18E107)

 

January 2019

Dear Sir or Madam,

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

Fujian Wanda Automobile Glass Industry Co., Ltd. (“Wanda”) has decided that a defect which relates to motor vehicle safety exists in certain replacement windshields intended for installation in 2014-2018 Toyota Highlander vehicles.  Our records indicate that this windshield may be installed in your vehicle.  Therefore, we ask that you review this notice carefully.

 

What are the products involved?

This recall involves certain replacement windshields manufactured by Wanda for 2014-2018 Toyota Highlander vehicles that were produced between September 7, 2015 and March 10, 2018, having any of the following part numbers: FW03878GTY; FW03880GTY, FW03881GTY, FW03882GTY, FW03883GTY, FW03884GTY, FW04155GTY, FW04156GTY, and FW04271GTY.

To determine if this recall covers your windshield, look for the windshield marking that resembles the example marking below. This marking is located at the windshield’s bottom passenger-side corner. Your windshield is covered by this recall if the marking contains all of the following:

  • The Fuyao logo and “FUYAO”.
  • “DOT – 459”.
  • An alphanumeric code of FW3878, FW3880, FW3881, FW3882, FW3883, FW3884, FW4155, FW4156 or FW4271.
  • A sequence at the bottom that starts with 5, 6,
    7, 8•, 8•, or 8•.

 

What is the problem?

The windshields have a wire harness that is sealed at the bottom of the windshields. The seal can break during manufacturing, assembly, handling, or vehicle use, resulting in water entering and traveling along the wire harness to the vehicle’s wiring and potentially causing corrosion or water damage that may impact the function of certain Toyota Highlander parts, including the ECM A43, which may prevent the vehicle from starting or cause the vehicle to stall or experience limited or no throttle response during operation. The loss of engine power or reduction or loss in throttle response could result in a vehicle crash with prior warning. Prior warning may include dashboard indicators being displayed for the power steering, traction control, oil, and/or battery, and “BRAKE” or “BRAKE OVERRIDE SYSTEM FAILURE” instrument panel messages.

 

What will we do?

If you have a windshield that is covered by this recall, Wanda will arrange for the replacement of the windshield without charge. Replacements will be provided at Wanda-designated facilities across the United States beginning February 11, 2019. To find a nearby replacement facility and schedule a replacement, contact Wanda Customer Service at 1-888-267-1168.

The replacement process will involve replacing the recalled windshield with a new windshield and inspecting your vehicle’s electronic control module (“ECM A43”) and certain components leading to the ECM A43 for corrosion or water damage. The new replacement windshield differs from the recalled windshield because its wire harness is mounted on the windshield with brackets and there is a water-proofing junction in the wire harness. Wanda estimates that the replacement and inspection will take one to two hours.

If the inspection of your vehicle reveals corrosion or water damage involving the ECM A43 and certain components leading to the ECM A43, Wanda will arrange for a Toyota dealership to further inspect your vehicle and repair damage caused by the recalled windshield. Wanda will voluntarily cover the cost of these inspections and repairs and, upon request, provide a complimentary car rental for you if your vehicle will be out of service for an extended period while repairs are performed at the dealership.

 

What should you do?

Contact Wanda Customer Service at 1-888-267-1168 to arrange for the replacement of your recalled windshield and inspection of your vehicle.

You may submit a complaint to the Administrator, National Highway Traffic Safety

Administration, 1200 New Jersey Ave, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153), or go to https://www.safercar.gov, if you believe that Wanda has failed or is unable to repair your windshield without charge and within a reasonable amount of time.

If you have already repaired or replaced your windshield, you may be eligible for the cost of the repair or replacement. For additional information, please see the enclosed document titled “Reimbursement Program for a Pre-Notification Remedy” or contact Wanda at the phone number below.

If you have any questions about this recall, please call Wanda Customer Service at 1-888-2671168.

We appreciate your cooperation and prompt attention to this important matter, and apologize for any inconvenience.

Sincerely,

Fujian Wanda Automobile Glass Industry Co., Ltd.


Reimbursement Program for a Pre-Notification Remedy
(NHTSA Recall 18E107)

This reimbursement program applies to pre-notification remedies of the following recalled part: Wanda replacement windshields for 2014-2018 Toyota Highlander vehicles that were produced between September 7, 2015 and March 10, 2018, having any of the following part numbers: FW03878GTY; FW03880GTY, FW03881GTY, FW03882GTY, FW03883GTY, FW03884GTY, FW04155GTY, FW04156GTY, and FW04271GTY.

For an owner of a recalled part who remedied the safety defect in the part not later than 10 calendar days after Wanda mails the last of its notifications to owners pursuant to 49 CFR Part 577, Wanda will reimburse the owner for the remedy subject to the following conditions:

  1. The remedy must have addressed the defect that led to the recall or a manifestation of the defect;
  2. The remedy must have been reasonably necessary to correct the defect or a manifestation of the defect;
  3. The remedy was made after November 27, 2017, but not later than the later of 10 days after Wanda mails the last recall notice to owners, pursuant to 49 CFR Part 577 or, if applicable, 30 days after the conclusion of Wanda’s initial efforts to provide public notice of the defect pursuant to 49 CFR Part 577.7.

The reimbursement amount for a pre-notification remedy will be limited to:

  1. If the recalled item was replaced, the retail price of the recalled item, plus taxes; or
  2. If the recalled item was repaired, the cost of parts for the remedy (not to exceed the manufacturer’s list retail price for the parts), plus associated labor (not to exceed local labor rates), miscellaneous fees for disposal of waste, and taxes.

To obtain the reimbursement, an owner must submit a claim to Wanda with all of the following information and documentation:

  1. The owner’s name and address.
  2. Identification of the recalled product (e.g., a photograph of the markings on the product or other documents indicating it is the recalled product).
  3. The NHTSA recall number (i.e., 18E107).
  4. The identity of the owner of the recalled item at the time the pre-notification remedy was obtained;
  5. A legible copy of the receipt for the pre-notification remedy. If the remedy was a repair, the receipt must: indicate that the repair addressed the defect that led to the recall or a manifestation of the defect; and state the total amount paid for the repair. Itemization of the receipt must be provided if it is unclear on the face of the receipt whether the repair addressed only the defect.
  6. If the recalled item was replaced, documentation that the owner or a relative of the owner (the relationship should be identified) owned the recalled item.

Reimbursement Program for Pre-Notification Remedy (18E107)     1 Claims for reimbursement may be mailed to:

Fujian Wanda Automobile Glass Industry Co., Ltd.
Recall 18E107
301 Halton Rd E
Greenville, SC 29607

Owners of the recalled part can contact Wanda for additional information at 1-888-267-1168.


Owner Notification Letter

January 2019

https://static.nhtsa.gov/odi/rcl/2018/RCONL-18E107-8323.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [90.60 KB]

 


Manufacturer Notices

https://static.nhtsa.gov/odi/rcl/2018/RCMN-18E107-9964.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [82.58 KB]

 


Reimbursement Program for a Pre-Notification Remedy
(NHTSA Recall 18E107)

https://static.nhtsa.gov/odi/rcl/2018/RMRP-18E107-4284.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [5.78 KB]

 


Recall Acknowledgement

December 11, 2018

https://static.nhtsa.gov/odi/rcl/2018/RCAK-18E107-2962.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [241.68 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18E107&docType=RCL


 

SaleBestseller No. 1
3M Auto Glass Urethane Windshield Adhesive, 08693, Medium Viscosity, High-Strength, Fast-Curing, 310 mL/10.5 fl oz Cartridge , Black
  • CURES RAPIDLY: Fast-curing adhesive produces rapid results
  • EASY AND CLEAN APPLICATION: Formulated as a medium viscosity and non-sag adhesive for easy and clean application
  • RAPIDLY PRODUCES HIGH BOND STRENGTH: High bond strength designed for windshield bonding and stationary glass attachment
  • MEET REQUIREMENTS: Adhesive properties meet many application demands and strength requirements
SaleBestseller No. 2
Auto Glass Sealant Windshield Urethane Glue Sikaflex P2G Primerless Adhesive x 2
  • 6 Hour SDAT
  • One Component
  • Short Cut-Off String
  • High Viscosity
  • This listing include 2 tube of Sikaflex P2g
Bestseller No. 3
Dow U-428 Plus Auto Glass Windshield Urethane Primer Less Adhesive Glue Sealant, 10 Tube
  • Primer less to glass
  • Fast curing
  • One-component and conventional-cure adhesives
Bestseller No. 4
[2 Pack] Polyurethane Windshield Adhesive with Fast Curing Formula - High Bond Strength Window Sealant Compound - Easy Automotive Glass Glue - Windshield Sealant Black - Vehicle & RV Polyurethane Glue
  • 2 Pack | Ultimate Bonding Strength –– A secure, permanent hold is one application away. This single-component glass repair glue sets the standard for optimal sealing and safety. This glass sealant meets the strength requirements set out by manufacturers for windshield replacement
  • Effortless Application –– Get the job done right the first time with this medium viscosity auto glass adhesive that can be loaded into any standard caulking gun. The non-sag properties ensure that the compound doesn't bleed for enhanced control
  • Rapid Results –– Add weather-resistant protection that lasts. Tackle your auto glass project today with this quick cure urethane adhesive compound. Use this windshield glue that delivers a secure hold that you can count on
  • For Every Auto Glass Project –– From convertibles to RVs, windshields to sidelights, this car window sealant has you covered. Suitable for interior or exterior use, apply this urethane window adhesive for any windshield or stationary glass attachment, including side and backlights
  • 2 Pack Complete Convenient Kit –– For professional mechanics to DIY enthusiasts, this set includes what you need to get the job done. This automotive glass adhesive kit comes with nitrile gloves for added personal protection and an application tip to make the process even easier
Bestseller No. 5
Polyurethane Windshield Adhesive with Fast Curing Formula - High Bond Strength Window Sealant Compound - Easy to Apply Automotive Glass Glue - Windshield Sealant Black - Vehicle & RV Polyurethane Glue
  • Ultimate Bonding Strength –– A secure, permanent hold is one application away. This single-component glass repair glue sets the standard for optimal sealing and safety. This glass sealant meets the strength requirements set out by manufacturers for windshield replacement
  • Effortless Application –– Get the job done right the first time with this medium viscosity auto glass adhesive that can be loaded into any standard caulking gun. The non-sag properties ensure that the compound doesn't bleed for enhanced control
  • Rapid Results –– Add weather-resistant protection that lasts. Tackle your auto glass project today with this quick cure urethane adhesive compound. Use this windshield glue that delivers a secure hold that you can count on
  • For Every Auto Glass Project –– From convertibles to RVs, windshields to sidelights, this car window sealant has you covered. Suitable for interior or exterior use, apply this urethane window adhesive for any windshield or stationary glass attachment, including side and backlights
  • Complete Convenient Kit –– For professional mechanics to DIY enthusiasts, this set includes what you need to get the job done. This automotive glass adhesive kit comes with nitrile gloves for added personal protection and an application tip to make the process even easier
SaleBestseller No. 6
2 Tube of DOW U-428 Plus Auto Glass Windshield Urethane Primerless Adhesive Glue Sealant
  • Primerless to glass
  • One-component, conventional-cure adhesives
  • Automotive Urethane, Adhesive
  • A Dow /Dupont Chemical OEM product For use on all auto glass installations
Bestseller No. 7
DURVOL Auto Glass Urethane Windshield Adhesive Sealant Pack of 1 Black
  • Easy to apply, one-component adhesive sealant requires no mixing, fast curing and high bond strength
  • Strong power offers a permanent bond, it's conventional-cure adhesive, strong bonds to auto glass to car bodies
  • Automotive urethane adhesive sealant, use on all auto glass installations
  • Has excellent weathering characteristics and is suitable for use in all climates
  • Tough, flexible bonds, retaining strong bonds even during vibration, swelling, or shocking
SaleBestseller No. 8
(2) Tubes U-418 Dow Auto Glass Sealant/Adhesive/Urethane-Primerless 10.5oz 310ml
  • (2) Tube of Dow / Dupont U418 (10.5oz 310ml)
  • Requires 16:1 thrust ratio caulk gun or better to properly dispense - use with wide nozzles - does not fit standard silicone caulk guns.
  • Primerless to Glass Urethane - Primer to cover any scratches or for application on bare metal or freshly painted surfaces.
  • BETASEAL U-418 is crash tested to a minimum drive away time see chart in photos (FMVSS 212). Please consult fixed glass installation guide for more details.
  • Professional Use Product* prior use of this product is required - failure to adhere to guidelines may result in improper installation which may include: leaks, air noises, or even serious injury. Seller highly recommends using a certified automotive glass technician.
Bestseller No. 9
Akfix Urethane Windshield Adhesive Black (2x10.1 fl.oz.) - Fast Curing Car Window Sealant, High Bond Strength Auto Glass Sealant | 2 Pack
  • Enhanced Safety and Performance: Experience unmatched bonding strength with Akfix windshield sealant, ensuring high mechanical performance and vehicle integrity with every use. Perfect for professionals dedicated to precision and safety.
  • Fast and Efficient: Akfix windshield adhesive's fast-curing formula allows rapid strength development, minimizing downtime and accelerating workflow for automotive glass professionals.
  • Versatile and Durable: With good non-sag properties and cold application capability, Akfix windshield glue delivers reliable performance in any weather, proving ideal for a wide range of automotive glass bonding needs.
  • Seamless Application: Our one-component formulation and short cut-off string ensure a smooth, hassle-free application, making Akfix the go-to urethane windshield adhesive for a flawless finish that can be overpainted to match any vehicle.
  • Innovative Solution for Leak Prevention: Tackle windshield leaks head-on with Akfix windshield sealant for leaks, designed to provide a watertight seal that lasts, ensuring peace of mind for both technicians and vehicle owners.
Bestseller No. 10
Betaseal U-428 Dow Auto Glass Primerless Urethane/Sealant/Adhesive with Single Application Primer (2)
  • (2) Tube of Dow / Dupont U428HV (10.5oz 310ml) + (1) 5504GSA Single Use Application Primer Stick 10ml
  • Requires 26:1 thrust ratio caulk gun or better to properly dispense - use with wide nozzles - does not fit standard silicone caulk guns.
  • Primerless to Glass Urethane - Primer to cover any scratches or for application on bare metal or freshly painted surfaces.
  • OEM Quality - BETASEAL U-428HV is crash tested to a minimum drive away time of 4 hours down to 40°F/4.4°C (FMVSS 212). Please consult fixed glass installation guide for more details.
  • Professional Use Product* prior use of this product is required - failure to adhere to guidelines may result in improper installation which may include: leaks, air noises, or even serious injury. Seller highly recommends using a certified automotive glass technician.

Last update on 2024-03-20 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...