NHTSA Campaign Number: 17V846
Manufacturer Forest River, Inc.
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 52
A brake fluid leak or air ingestion can lengthen the distance needed to stop the vehicle, increasing the risk of a crash.
Summary
Forest River, Inc. (Forest River) is recalling certain 2017-2018 Georgetown recreational vehicles, models GTA31L5, GTA31R5, GTA369XLF, GTA36B5, GTA36B5F, GTA377XLF, GTA378XLF, built on Ford chassis and equipped with Antilock Brake Systems (ABS). The brake Hydraulic Electronic Control Units (HECU) on these vehicles may be missing valve block ball plugs, potentially causing a brake fluid leak or air ingestion during electronic brake distribution and/or ABS activation.
Remedy
Forest River will notify owners, and Ford or Lincoln dealers will inspect the HECU for missing valve block ball plugs, replacing the unit as necessary, free of charge. The recall began on January 26, 2018. Owners may contact Ford customer service at 1-866-436-7332 or Forest River customer service at 1-574-206-7600. Forest River's number for this recall is 68-0606.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
January 17, 2018
https://static.nhtsa.gov/odi/rcl/2017/RCAK-17V846-8745.pdf
Loading...
Reload document
Open in new tab
- Provides an extra margin of safety in extreme braking conditions
- Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
- Excellent for ABS, disc and drum brake systems
- Delivers braking power when needed by avoiding a spongy pedal
- Both wet and dry boiling points exceed the minimum government standards
- High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5.1
- Extended Service Interval (ESI): Lasts 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5.1
- Exceeds all DOT 3, DOT 4, and DOT 5.1 standards
- Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 670mm2/s
- Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years.
- Premium DOT 3 Brake Fluid has a minimum boiling point of 450°F
- Meets and exceeds DOT 3 and all other Federal and SAE specifications and standards for motor vehicle brake fluids
- Mixes with all DOT 3 approved brake fluids
- Designed for use in disc, drum and ABS brake systems
- Recommended for all ABS, disc and drum brake systems as well as hydraulic clutches requiring DOT 3 and DOT 4 fluids
- Provides corrosion protection for all metals within the braking system
- Compatible with all conventional brake fluids
- Substantially reduces the possibility of fluid vaporization and eventual brake failure
- Excellent performance in high-temperature braking systems
- Unique formula engineered to provide outstanding performance in todays high temperature braking systems
- Provides optimum braking response
- Exceeds DOT3 and DOT4 specifications
- Mixes with other conventional brake fluids
- For case order 12
- Protects DOT 3 ABS disc or drum brake systems
- Helps provide protection against brake failure from vapor lock
- Helps prevent corrosion in brake system
- Works with all brake systems requiring DOT 3 fluids
- Exceeds Federal Motor Vehicle Safety standard No. 116 and meets SAE spec. J1703
- High quality blend of polyethylene glycol ethers and additives
- Compatible with all brake system rubber components and other brake fluids
- Prevents seal hardening or softening
- Protects against rust and corrosion
- Provides excellent lubricity
- An exclusive European formula with an exceptionally high boiling point and superior anti-vapor lock characteristics
- Superior braking during arduous conditions like racing and rallying
- Typical wet boiling point is 270deg. C
- Typical dry boiling point is 310deg. C
- Exceeds DOT3 and DOT4 specifications
- Minimal decrease of boiling point due to excellent water locking properties
- Non-foaming when filling and bleeding the brake system
- Excellent corrosion protection due to selected additives
- High safety tolerance against steam bubbles
- Makes brake fluid changing intervals of up to 3 years possible
- For hydraulic actuated brake and clutch systems
- Non-silicone synthetic fluid
- Extreme thermal resistance and stability
- Very high boiling point (312 degree centigrade / 594 degree Fahrenheit)
- Better aerodynamic performance
Last update on 2020-09-26 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2020-09-26 / Affiliate links / Images from Amazon Product Advertising API
