| “This site contains affiliate links for which OEMDTC may be compensated” |
May 31, 2024 NHTSA CAMPAIGN NUMBER: 24E041000
Steering Gear Assembled Incorrectly
A fractured steering gear shaft can cause a loss of steering control, increasing the risk of a crash.
NHTSA Campaign Number: 24E041
Manufacturer Oshkosh Corporation
Components STEERING
Potential Number of Units Affected 108
Summary
Oshkosh Corporation (Oshkosh) is recalling certain Shepphard Steering Gears, with part number 3875726, sold as replacement parts for certain S-Series vehicles. The steering gears may have been assembled incorrectly, which can cause the gear to fracture.
Remedy
Oshkosh will work with the supplier, R.H. Sheppard, to inspect and replace the steering gears as necessary, free of charge. Owner notification letters are expected to be mailed on June 21, 2024. Owners may contact Oshkosh’s customer service at 1-888-686-7278.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
In October 2022, following a notification by RH Sheppard that it had determined a defect existed in certain steering gear assemblies, Oshkosh conducted a recall of vehicles equipped with potentially defective parts (22E-073). In February 2024, RH Sheppard extended the scope of the recall to include additional steering gear assemblies that were not included in its original recall. (23E-094) The expansion of the RH Sheppard recall was brought to Oshkosh’s attention and after investigating whether any of the additional recalled parts were installed in Oshkosh vehicles, Oshkosh concluded that any affected components were used as service or aftermarket replacement parts only. On May 30, 2024, Oshkosh decided to conduct a recall of the additional set of steering gear assemblies identified by RH Sheppard.
1 Affected Product
Equipment
| BRAND | PART NO. | PRODUCTION DATES |
| OSHKOSH | S-SERIES STEERING GEAR | |
2 Associated Documents
Recall Acknowledgement
RCAK-24E041-2238.pdf 645.742KB
Recall 573 Report
RCLRPT-24E041-3907.PDF 214.404KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=24E041&docType=RCL
- High quality power steering fluid and conditioner
- Stops Noise
- Stops slipping
- Helps prevent unusual wear
- Protects seals
- Package Dimensions: 23.2 H x 6.9 L x 11.2 W (centimetres)
- Package Weight: 0.9 kilograms
- Country of Origin : United States
- Fit type: Universal
- REDUCES NOISE AND SMOOTHES OUT HARD STEERING: A unique dual cavity bottle containing a combination of the best performance additives to repair the most common power steering fluid related problems.
- STOPS LEAKS AND RECONDITIONS RACK & PINION: Power Steering Repair can be used to top-off the existing fluid when low, or add a bottle when changing fluid.
- RESTORES PREFORMANCE: Works on all vehicles, domestic and import.
- ADDS PROTECTION: Compatible with ALL types of power steering fluid or ATF, including petroleum, mineral oil and synthetic formulas.
- REPAIR-IT: Power Steering Repair-It works with all types of power steering fluid or ATF
- The service solution for ALL European, North American, and Asian vehicles (Honda fluid recommended for Honda/Acura vehicles)
- Reduces friction and protects seals and hoses - extending the life of the power steering system
- Provides excellent cold and high temperature performance eliminating "morning sickness" stiffness
- Excellent for use in electric hydraulic systems
- Cleans and frees sticky turbines and pumps
- For 2007 and up Honda and Acura vehicles, Backwards compatible with older Honda and Acura vehicles
- Lubricates and reduces wear in the pump, Prevents rust of the steel parts
- Lubricates and fights wear on the gear faces of the turning mechanism (eg. Rack and pinion)
- Protects and cleans the seals and hoses
- Contains no seal swellers
- Premium full-synthetic formulation specifically engineered for Asian vehicles
- Provides protection against wear, foaming, and corrosion to maintain optimal performance
- Designed for extreme temperatures while also providing excellent operation in low temperatures
- Delivers excellent oxidative stability for extended fluid life
- Engineered for Honda, Acura, Toyota, Lexus, and all other Asian-manufactured vehicles
- TOP QUALITY / GUARENTEED【Interchange Part Number】: 08206-9002A, 08206-9002, 08206-9002PE, 91345-RP6-A01, 91370-SV4-000, 91370-TA0-000, 91345-R70-P01, 91345-R70-A11, 91345-RDA-A01, 91370-SV4-000, 91345-PDA-E01, 91345-PAA-A01,
- 【Package Includes】: 3PCS Power Steering Fluid + 1PC Power Steering Pump Rubber Inlet O-Ring Seals + 1PC Power Steering Pump Rubber Outlet O-Ring Seals + Dispensing Cap. The perfect kit for your steering pump
- 【Recommendations】: Keep your power steering in top form with our complete repair kit.
- 【Compatible with】: Civic 11-98 1.8L / 2.0L , Acura RDX 12-07 2.3L, Ridgeline 3.5L 11-06, Odyssey 10-98 3.5L, MDX 3.7L 09-02, CR-V 2.4L 09-97, Acura TL 08-99 3.2L 3.5L, Element 2.4L 08-03, Pilot 3.5L 07-04, TSX 2.4L 07-04, Prelude 01-97 2.2L , Accord 2.3L 07-98, Integra 01-98 1.8L, CL 3.2L 01-99
- 【Size】: 91370-SV4-000 O-Ring (14.4X1.9), 91345-RDA-A01 O-Ring (13.0X1.9), 08206-9002: 12FL. OZ. X 3 = 36FL. OZ. Perfect quantity to do a good job.
- Stops Leaks
- Helps prevent wear and corrosion
- Improves vehicle longevity and performance
- Smooths and eases steering operation
- Helps prevent slippage
- 1 bottle treats 4 to 5 quarts of oil
- Stops and seals steering fluid leaks
- Works with all types of power steering leaks
- Part number: 1630
- Protects against wear and pump breakdown caused by abnormal wear, oxidation, and foaming
- Performs even in sub-zero temperatures
- Specifically designed for all power steering units
- For high and low mileage vehicles
- Use as needed, always consult your owner's manual for fluid specifications
Last update on 2024-06-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.