May 9, 2023 NHTSA CAMPAIGN NUMBER: 23V332000
Aerial Device May Contact Vehicle Cab
Without accurate display data, the aerial device may inadvertently contact the cab and increase the risk of injury to the operator.
NHTSA Campaign Number: 23V332000
Manufacturer E-One Incorporated
Components EQUIPMENT
Potential Number of Units Affected 24
Summary
E-One Incorporated (E-One) is recalling certain 2022-2023 Cyclone N and Typhoon N vehicles. The electronic sensor for the aerial device may fail and not display accurate data on the angle of inclination.
Remedy
Dealers will update the electronic sensor software, or install a new electronic sensor, as necessary, free of charge. Owner notification letters are expected to be mailed June 14, 2023. Owners may contact E-One customer service at 1-352-237-1122.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
On March 15, 2023, E-ONE was contacted and told the inclination sensor stopped working during training on truck SO 144708 in Sarnia, Canada.
The E-ONE Service team investigated the specific customer issue and communicated the findings to Engineering.
On April 12, 2023, the Engineering team and questions were sent to and discussions were had with the Manufacturer, Joral LLC, regarding the issues found.
On April 17, 2023, E-ONE was contacted that the Aerial device contacted the cab during training on another truck in Marion, Illinois, truck SO 144814.
The E-ONE Service team investigated the specific customer issue and communicated the findings to Engineering.
The Engineering team continued to investigate and collect more data and information and to quarantine the sensors in the E-ONE inventory.
On April 27, 2023, the issue was addressed in the Product Performance Meeting and it was determined that a Recall should be initiated.
On April 28, 2023, research was performed to identify the population of the affected trucks
On May 8, 2023 E-ONE submitted the request to issue a Recall to REV Group. Received approval from REV Group to perform a Recall.
4 Affected Products
Vehicles
MAKE | MODEL | YEAR |
E-ONE | CYCLONE N | 2022-2023 |
E-ONE | TYPHOON N | 2022-2023 |
3 Associated Documents
Recall Acknowledgement
RCAK-23V332-2479
Defect Notice 573 Report
RCLRPT-23V332-2238.PDF 215.999KB
RCLRPT-23V332-2238
Manufacturer Notices(to Dealers,etc)
RCMN-23V332-7529.pdf 136.322KB
RCMN-23V332-7529
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V332&docType=RCL
Truck Diagnostic
Heavy Duty Commercial Truck Reprogramming
![]() |
USB-Link 2 (Wi-Fi) Product Number USBLINK2WF NEXIQ Technologies Vehicle Interface Utility |
Description:
The USB-Link 2, the next generation vehicle interface from NEXIQ Technologies, has arrived.
Dependable and rugged, the new USB-Link 2 is five times faster than its predecessor. It has sixteen times more random access memory than the old USB-Link, and it supports heavier bus loads on simultaneous channels. For even more reliability, we’ve upgraded the USB connector to a more robust, automotive grade connector with a latching mechanism. The USB-Link 2 is compatible with a wide range of OEM software applications.
Vehicle Network Protocol Support
- CAN / J1939 / ISO15765 – 250K, 500 K, 1M b/s with Auto Baud detection (3 channels)
- Single wire CAN (SWCAN)
- ISO 11898-3 Fault Tolerant CAN (FTCAN)
- J1850 VPW (Class 2)
- J1850 PWM (SCP)
- ISO 9141 / KWP2000 (ISO 14230) K/L line
- ALDL 9600 and 8192 baud
- ATEC 160 baud
Operating System Support
- Windows Vehicle Communication API
- PC Operating System Compatibility
- Windows XP SP3
- Windows 7 (32 & 64 bit)
- Windows 8 (32 & 64 bit)
- Interfaces to Computing Platforms
- USB 2.0
- Wi-Fi (dual band)
Nexiq USB-Link 2 Kit Includes:
- NEXIQ USB-Link 2
- 6-pin/9-pin Deutsch adapter
- Latching USB cable
![]() |
Nexiq Blue-Link Mini Product Number NQ126015 Nexiq Blue Link Mini™ Vehicle Communication Interface |
Use Your Mobile Device To Make The Connection!
The Blue-Link Mini is not a supported device for use with DiagnosticLink. For complete details regarding DiagnosticLink, please login with your SSO ID.
The NEXIQ Blue-Link Mini enables you to use either your iOS or Android devices (e.g., smartphones or tablets) to communicate with heavy duty vehicles for quick access to basic diagnostic information. It plugs into the vehicle’s diagnostic connector, and provides wireless communication with on-board electronic control units.
If you are a driver, a service writer, or a service technician using the Blue-Link Mini as a triage tool, wireless vehicle communication was never easier.
NEXIQ Technologies is currently working with the American Trucking Association’s Technology and Maintenance Council (TMC) to develop a standardized communication protocol for mobile devices. This standard will make developing applications for the Blue-Link Mini a straightforward task.
Benefits
- Inexpensive
- Convenient
- Small—fits in your pocket
- Wireless—no cables required
- Reliable Bluetooth communication
- Fast—lets you quickly gather a snapshot of vehicle statistics
Features
- Compatible with iOS and Android devices (pairs easily with both)
- Integrated 9-pin Deutsch connector
- Simple, one-button design to put the device in Discovery mode
- When paired with an iOS or Android application (e.g., DTNA eLink), provides quick access to:
-
- Fault codes
-
- Basic parameters
-
- Vehicle specs
-
- Fuel level
-
- etc.
Note: For more information on DTNA-eLink, see the Mobile App tab below.
Vehicle Network Protocol Support
- 3 CAN Channels (CAN / J1939 / SO15765 -250K, 500K, 1Mb/s with Auto Baud detection)
Daimler Truck
Sterling 360:
https://www.stl360techinfo.com/Order1.asp
For Detroit PSL:
https://ddcsn-ddc.freightliner.com/cps/rde/xchg/ddcsn/hs/psl_subscribe.htm
DiagnosticLink Order Site:
DiagnosticLink Direct Link:
https://diagnosticlink.nexiq.com/DTNA/Default.aspx
DiagnosticLink Through Access Freightliner:
https://www.accessfreightliner.com
- 👍【Designed for Cummins】Ancel HD3400 heavy duty truck scanner can read/clear codes, live data, ECU, DPF regen, DPF reset, etc. for your Cummins engine: Cummins X12/x15/ISX15/L9/B6.7/Westport L9N/ISB/ISD/ISL/ISG/ISX/ISF/ISBe/QSM11/ISM/QSX15/ISC/ISN/ISK, such as Freightliner, Peterbilt, Kenworth, International, Ford Pick-up F650/F750, Chevy Pick-up, RAM Pick-up, Volvo Truck, Mack, Western Star, Autocar, Ford F600/F700, Terex TR50, Bluebird, Bobcat, Komatsu, Zoomlion, ect.
- 👍【Designed for Detroit】HD3400 heavy duty truck scan tool can work for your Detroit DD13/DD15/DD16, Series 50/60, MBE 900/MBE 4000, OM501/OM 502, DDDL 6/DDDL 7, Freightliner Cascadia M2/108SD/114SD/122SD, Western Star 4700/4800/4900/6900/47X, Kenworth C500, ect.
- 👍【Designed for Paccar】The diesel scan tool is compatible with your Paccar engine: Paccar PX-7/PX-9, MX-11/MX-13, such as Kenworth T780/K270E/K370E/T680 Next Gen/T680/T880/W990/T180/T280/T380/T480, Peterbilt 579/389/567/367/365/548/535/536/537/220, ect. ❗️Please note that for PACCAR engines that need to do dpf function after 2017, HD3400 truck diesel scanner also need another crossover adapter to be compatible.
- 👍【Designed for Caterpillar】HD3400 diesel scanner diagnostic tool also work for your Caterpillar C7/C9/C11/C13/C15/C32, Ford Pick-up F-650/750, Freightliner M2/Argosy, Peterbilt 379/387/385/378/357, Kenworth C500, Caterpillar 320D/312E,/312F, ect.
- ✅【Excellent DPF Regeneration】This diesel code reader provides you with powerful DPF capabilities, including active(auto) regen, passive regen, DPF related information reset, DPR state reset, forced DPR check/regen, differential pressure test, DPD forced regeneration, Manual Ash/Ash Service Regenration, DPD auto regeneration, DPD normal regeneration control, Exhaust Aftertreatment System etc. OEM level DPF function, saving you thousands of dollars on DPF.
- 🚛【2023 PRO SCAN TOOL, DESIGNED FOR HEAVY DUTY】Autel MaxiSys MS908CV is designed for 99% heavy/ semi/ light trucks to perform ECU Coding, Bi-directional Control, Full Diagnose, 48+ Services etc. Moreover, MS908CV comes with 14pcs adapters, JW 1-10 jumper set, Plug Commins-8 and UNI-4, which not only for standard diesel OBD II vehicles but also for non-standard OBD trucks, including Freightliner, Kenworth, Peterbilt, Volvo, Mack, Hino, Isuzu etc.
- 🚛【ADVANCED ECU CODING】This professional truck scanner MS908CV has advanced ECU coding features to level up your trucks. It allows you reprogram adaptive data for certain components after making repairs or replacements, modify existing parameter values to reflash higher-level functions, disable useless features, improve vehicle diesel efficiency, drivability and durability. Online ECU coding also allows obtaining the online data from server when code data is lost, easily solve vehicle problems.
- 🚛【OE-LEVEL BI-DIRECTIONAL CONTROL】Autel MaxiSys MS908CV enables bi-directional control ECM and transmit commands to vehicle modules to perform specific test, quickly and accurately pinpoint the fault causes. Such as control engine idle speed to solve idle chatter problem, test fan operation to diagnose abnormal temperature, control windows/Door up/down, fuel pumps, AC on/ off, emission leak test, mirror fold/unfold, etc. This features will help you save loads of time and win more business.
- 🚛【48 SERVICE: 25 SPECIAL & 23 ADAPTATIONS】Autel CV MS908CV top commercial car diagnostics scanner comes with 48 services: 25+ hot service such as Oil Reset, Inject Coding, EPB, ABS, SRS, Suspension etc; 23 adaption functions like O2 Sensor Calibration, D-P-F, Fuel Pressure Adaptation, all sizes of DOC/D-P-F Instant Replacement Reset for trucks, passenger cars, semi-trailer tractors, passenger trucks. ✨Please send VIN to 🚍auteldirect@ outlook . com🚍 check compatibility.
- 🚛【ALL-SYSTEM SCAN FOR TRUCKS】Autel MaxiSys MS908CV truck scan tool performs all systems scan on heavy duty trucks and passenger cars, such as Engine, Body & Chassis Controller, Instrument Panel System, ABS etc, which can read/ clear DTCs, view live data in text, graph, analog etc. Autel MS908CV can diagnose Cummins/ Caterpillar/ Bendix/ Detroit/ Paccar/ Perkins/ Maxxforce Engines, Wabash ABS Trailer Brakes, Wabaco Air Cylinder, Haldex ABS/ EBS and Allison, Eaton Transmissions etc.
- 🏆5Yrs Warranty【2023 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2in1:The 1st ALL-IN-ONE scanner from LAUNCH ,work for Cars/Trucks/buses/trailers/excavators/diesel engine/construction machinery/ /pick-up/etc.【AutoAuth for FCA SGW】Support Chrysler,Dodge,Jeep,Alfa Romeo and Fiat after 2017【2023 OE-Level features】Guiding Functions,Variant Coding with Benz,Modification for BMW,Offline Coding,Customization,Personalization,Calibration.
- 🚗【Over 60 Service Reset Functions + Bi-Directional + ECU Coding + Adaptation + Intialization + Matching】LAUNCH X431 PRO3S+ HDIII can send commands to the system/component to test their working status for Active Test. Beside,this scan tool can also support ECU Coding, Key programming, Adaptation, Matching, 60+ reset service functions like SAS/EPB/TPMS/DPF/IMMO/Oil/Brake/GEARBOX Reset, ABS Bleed, Injector coding, etc... Powerful dealership level Functions can fully meet your needs.
- 👍【2023 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】LAUNCH X431 PRO3S+ HDIII automotive scanner equipped with Android 9.0 operating system, 10.1-inch HD IPS(1920*1200) touchscreen, 7000mAh rechargeable battery (up to 12+ hours battery life), 3+32G memory(support 128G Expand memory). Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, IMMO, BMS, TPMS, SAS, Fuel System, Light System and A/C system,more.Topology Mapping shows the normal, faulty and not equipped system by diagnosing the whole system.
- 🚛【Wider Vehicle Coverage of 12V & 24V Vehicles + 24 Languages】LAUNCH X431 PRO3S+ HDIII automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks which provide the most extensive multi-brand coverage and comprehensive diagnostics for you. Passenger vehicles:Cars, SUV, MPV, Pickup truck; Commercial vehicles:Heavy Duty Truck, Passenger Bus, Excavator, Tractor, Recreational Vehicle. 24 Language: English,French,Spanish,German,Russian,Japanese,Portuguese,Italian,Polish,more.
- 🔥【User Friendly, Easy To Use】LAUNCH X431 PRO3S+ HDIII Automotive scanner supports One-Click Auto VIN Detect, One-Click WiFi Update, One-Click Generate Graph. In addition, this LAUNCH scan tool also support remote diagnostic, diagnostic feedback and respond, Live data graphing, data Stream record and playback, Generate Health Report (Share & Print). Bring you a more convenient and comfortable experience to a large extent.
- 【Innovative Bluetooth Truck & Car Scanner】Tired of bulky diagnostic cables? The ANCEL HD100 Heavy Duty Truck Scanner is the first wireless diagnostic tool that combines OBDII 16-pin and Green 9-pin dual interface (gasoline and diesel) in one unit. ✅The diesel code reader offers comprehensive diagnostics without bulky cables and adapters, thanks to its industrial-grade Bluetooth module.✅Compact and lightweight, allows comprehensive diagnostics for cars, trucks and loaders.
- 【Exclusive APP 3 Simple Steps to Start Up】 Use your smartphone download the App(ANCEL TRUCKER), register, and connect. With a beginner-friendly interface, this app is handy for professionals too. Note that for more accurate Bluetooth pairing, the phone's location feature should be turned on. 👉Supports only Apple and Android smartphones, not tablets.
- 🚍【Work for the Most Popular Trucks in USA】It's a pocket diagnostic tool that Simplify truck repairs, works for 99% truckers and truck fleets. The ANCEL HD100 Heavy Duty Truck Scan Tool can support engines including Cummins, Caterpillar, Detroit, and Paccar, and is widely compatible with Freightliner, International, Kenworth, Mack, Peterbilt, Sterling, Western Star, and Volvo. Cover the latest standard protocols SAE J1939, SAE J1708, including ISO 27145.
- 🚍【Full System HDOBD Scanner + Auto Scan】The commercial truck system diagnostics allow you to read and clear all electronic modules, including the truck's engine, ABS, transmission, and chassis. It also supports transmissions and ABS from Allison, Bendix, Eaton, Wabco, and ZF. Perfect for use in the garage or on the road, get the job done quickly with our compact diesel scan tool.
- 🚍【Powerful Regeneration Tool for Cummins&Caterpillar】 Supports exclusive OEM-level regeneration and reset functions for Cummins and Caterpillar, helps you get better MPG, throttle response, longer unit life, less downtime and frequent regeneration (passive). Save hundreds or even thousands of dollars in repair costs.
- 【Enhanced DPF Regen Tool】This diesel scan tool support OEM-level DPF function for Cummins, Detroit, Caterpillar, Paccar engine.including active(auto) regen, passive regen, DPF related information reset, DPR state reset, DPD forced regen etc.helps you better solve the exhaust aftertreatment system problems.
- 【Wide Heavy Duty Compatibility】ANCEL HD3400 PRO diesel scan tool supports standard HD OBD protocols (the latest J27145 included), which covers all major heavy truck models, support engine includes Cummins, Detroit, Caterpillar and Paccar.Model includes F650/F750, RAM2500/3500/4500/5500,LT Series,HX Series,LoneStar,MV Series,VNL 300/400/740/760,VNL 860/300/400/740 and more.
- 【Full OBDII & HD OBD】 【Truck & car 2-in-1】 The ANCEL HD3400 Pro not only is a 12V car OBD2 scanner with Full OBDII functions,but also is a 24V heavy duty diagnostic scanner with Full HD OBD functions,Such as read codes,clear codes, read Live data stream, read vehicle information and more, so that you can get accurate information, save time and money in maintenance.
- 【All systems diagnosis】 In addition to the Full OBDII & HD OBD functions , This heavy duty truck scanner also supports all systems,including ABS ,SRS, Transmission, engine,EPB,BMS,ECM, TCM, BCM, SAS, Fuel System, Light System and A/C system.
- 【Pin Detect Function】+【Lifetime Free Update】Pin Detect function is used to diagnose the connection status of the OBD inter face and detect whether the pins are damaged. This diesel code reader also allow you get the latest version at any time with free update via WIFI. It also covers more advanced features: one-click activation, screenshot, printing, feedback, view/email reports, pin detect, ect.
- 【2022 Specially for Heavy-Duty Vehicles】Here we present you the Autel Maxisys CV+J2534, a high-end diagnostic tool tailored for commercial vehicles such as semi-trucks, light-duty trucks, buses, construction vehicles, agricultural vehicles and supports 100+ brands. The official updates can always keep the scan tool up with the trends so as to meet the needs of workshops and pro mechs. As an official authorized Autel scanner, stick to the old rules, 365 days QA and 24/7 technical support.
- 【25 Service + 23 Adaptation Functions】Get the right tool Maxisys CV + J2534, get the things done. In total we’ve packed 25 service functions such as Oil Reset, SAS Rest, ABS Reset, for normal passenger cars and 23 adaption functions such as O2 Sensor Calibration, DPF Regeneration, Fuel Pressure Adaptation, for commercial vehicles. And those functions work perfectly for the 99% of commercial vehicles, for instance Freightliner, Kenworth, Peterbilt, International, Volvo, etc.
- 【ECU Coding & J2534】2022 Heavy-duty scanner MaxiSys CV empowers you to match modules with components, flash the hidden functions, and customize the OE-settings and it’s compatible with light-duty trucks and semi-trucks such as: Ford F-series, RAM Trucks, Scania, Mercedes, Iveco, etc. The J2534 ECU programming will no longer be a problem once you have the scanner in your hands. It acts as a pass-thru device and help you pass-thru the gateway to access the data for coding.
- 【All System Diagnostics, Same as Sanp-on Scanner】To help you root out the problems hidden underneath the hood, Truck Scanner CV can conduct a full-system diagnostic and present you with the full details about DTCs. Here are some on-board system it can dive into, such as Engine, AT, ABS, SRS, IMMO, air conditioning system, steering angle system, air suspension system, etc. Once the diagnostic is complete, you can access further details from waveform data stream or the health status report.
- 【Bi-directional Control & Relearning】 This heavy duty scanner is a bridge for you to mutual communicate with on-board modules and conduct active tests to track down the problems. Cylinder deactivation test, on-board electronic components test, cylinder compression test, all of those complex tests can be done with it. And also the truck scanner can read the injectors QR code and match them with ECU once the replacement is done. There is still a lot more waiting for you to find out.
- 【Functions covered】NC601 OBD2 Fault scanner diagnostic tool with new smart chip. It can easily determine the cause of check engine light on, read and erase fault diagnosis code quickly, view freeze frame, I/M monitor ready status, battery test, smoke test, fuel test, fault code information library (50000+), read data stream and playback function. Also supports 9-pin interface diesel light and heavy truck scan diagnostics, read/erase fault codes, data stream, etc.
- 【Heavy Duty Truck Diagnosis】:HD OBD Truck diagnostic scanner can quickly read engine fault codes (stored fault codes, intermittent fault codes, permanent fault codes, recorded fault codes) and erase the codes. It can also retrieve vehicle information and data stream. Suitable for 9-pin interface Cummins, Caterpillar, Detroit, Paccard etc diesel engines.
- 【Vehicle Coverage】:This OBD2 Scanner is suitable for most of the vehicles updated after 1996 that comply with OBDII standard (OBDII protocol: J1850(PWM,VPW),ISO_9141-2,ISO_14230-4(KWP,KWP-5BPS),ISO_15765-4(CAN,CAN-B, CAN-C,CAN-D)) compatible vehicles, passenger cars or light trucks are compatible. As well as J1939 compliant light and heavy duty trucks, tool trucks, etc.
- 【Advanced Design】: Humzor NC601 Car obd scanner adopts ergonomic design, with large screen, which is more convenient to operate. At the same time, one click I/M status is supported. The one click help page allows you to understand the detailed description of functions, even if you do not have professional car knowledge. No charging is required. The OBD code reader receives power directly from the vehicle. Three fault indicators display the status, so as to understand the vehicle condition more intuitively.
- 【Instructions】: If you encounter any problems when using the NC601 professional scanning tool, you can directly send it to us for technical support. We provide worry free return service. If you are not satisfied with the product, you can contact us directly, and we will provide you with efficient after-sales service.
- 【2023 Designed for CV】Autel MaxiSYS MS908CV is a professional scanner for commercial cars like light/medium/heavy-duty trucks and passenger cars. The extensive vehicle coverage of 150+ makes, bring you more clients. MS908CV shares the same or even adds more fancy diagnostic functions as Elite, MK908P, MS908 Pro, such as luxury hardware, 25 service features, 23 adaption functions, coding, J2534 programming, bi-directional control, full-system diagnostics, etc., giving you smooth experience.
- 【1 Scanner with 48 Services】Autel MS908CV is a scanner specially designed for independent workshops or mechs that deal with heavy machinery. It enjoys the same 25+ service functions as Elite, including Oil Reset/EPB/BMS/Throttle/IMMO/Injector Coding etc., and has 23 adaption functions for commercial trucks of all sizes of D-O-C/D-P-F Instant Replacement Reset, F-u-e-l Pressure Adaptation Reset, Injector CEOM Reset, etc.
- 【Local-Smith Coding + J2534 Programmer】Semi Truck Tool MS908CV is equal to 1 Elite plus 1 truck-specific diagnostic tool. Advanced ECU coding empowers you to match modules with components, flash the hidden functions, and it’s also compatible with light-duty trucks and semi-trucks. The latest J2534 MaxiFlash Elite, whose individual purchase costs $1000, can perform a comprehensive pass-through programming function, even for the newest controllers.
- 【OE-Level Diagnoses, Distinguished Vehicle Coverage】2023 Heavy Duty Truck scanner MS908CV is suitable for full-system diagnoses for 80+ makes and 150+ brands worldwide. Quite extensive coverage and deep diagnostic capabilities make MS908CV an industry chief. Real-time push messages alert your systems and software update. The remote control is available anytime and anywhere, and interactive data logging sessions allow direct contact with Autel support staff for troubleshooting.
- 【Active Test Gets Diagnoses Deeper】Through active test, Bidirectional scanner MS908CV will tell you what isn’t functioning precisely & you can send commands to test various modules in your car’s ODC, which is easy to operate and clear in the guide. For example, control the idle speed of the engine to solve the idle shudder problem; perform a throttle position sensor reset after cleaning the throttle; test fan operation to diagnose water temperature abnormalities, etc.
- 【Designed for CV, 1996-2023】Autel introduced 2023-new BT diesel diagnostic tool scanner MaxiSys MS908CV for major commercial vehicles (class 1-9): OEM-specific coverage of 80+ brands, OE-level ECU coding, bi-directional component actuations, 25+ passenger cars resets & 23+ CV adaptions, etc. built to meet ever-changing needs of techs and shops to repair CV cars smarter and bring more business. The high-end hardware specs allow smooth operation as fast as Autel MaxiCOM MK908P, Elite.
- 【ECU Coding & J2534 VCI Box】Same level as Maxisys Elite MS908S PRO, this heavy duty truck scanner MS908CV has the professional-grade ECU coding to help rematch the module replacement, and fix complex ECU-controlled problems for heavy machinery. You don’t need to buy expensive 1000-bucks-value OE tools for each brand. The included J2534 pass-thus device is fully compatible with both SAE J2534-1 & 2, and also serves as wireless BT communicating box for up to 210ft. (70m) diagnostic range.
- 【25+ Resets & 23+ Adaptions】Autel commercial vehicle diagnostic scan tool MS908CV gives quick access to 25+ most commonly-used Resets & Relearns same as MaxiSys Elite: oil, SAS, EPB, TPMS, injector coding, bleeding, DPF, BMS, throttle & IMMO and others. Also as a heavy duty truck scanner it boasts of 23+ tool-guided CV Adaptations as feature-rich as OE software but costs much less: DOC/DPF instant replacement reset, fuel pressure adaptation, and a variety of aftertreatment maintenance.
- 【Bi-Directional CV Scanner】Same as Maxisys Ultra MS919, this Autel scanner MaxiSys 908CV also features bi-directional control active tests. It can easily build mutual communication with commercial vehicles’ onboard systems, signal transceivers, control modules, or electronic parts, to swiftly locate the problem source, e.g. Aftertreatment DEF Leakage Test, Aftertreatment Cylinder Cutout Test, DEF Doser Pump Override Test … and thousands more!
- 【99%-Makes CV Coverage】OBD2 truck scan tool MS908CV can handle nearly all major CV cars like Trucks, Light Duty, Bus, Trailer, Construction, Agricultural, and many Expert commercial vehicles, over 80+ manufactures and 150+ makes ranging from Class 1 (0-6,000lbs) to Class 9 (33,000lbs). The built-in remote tech. assistance allows direct interaction with Autel for first-hand demonstration, training, and repair materials.
- 👍【2023 NEWEST Bi-Directional Scan Tool -Compatible With 12V And 24V Vehicles】LAUNCH X431 V+PRO 4.0&HDIII scan tool are designed for Passenger&Commercial Vehicles 2in1:The 1st ALL-IN-ONE scanner for 12V cars and 24V Heavy-duty trucks which provide the most extensive multi-brand coverage and comprehensive diagnostics for you. Passenger vehicles:Cars, SUV, MPV, Pickup truck; Commercial vehicles:Heavy Duty Truck, Passenger Bus, Excavator, Tractor, Recreational Vehicle.
- 👍【2023 Newest Directional Scanner —Faster, More Popular ,Wider Regional vehicle coverage 】LAUNCH X431V+ PRO 4.0 scan tool adds loads of OE-Level features as ➤Refresh Hidden Functions ➤ADAS Calibration➤Guided Functions➤AutoAuth for FCA SGW ➤Online Coding ➤Variant Coding ➤Setting & Changeover for Benz ➤Modification for BMW ➤Offline Coding ➤Customization ➤Personalization, for worldwide vehicles, and keep growing.
- 👍【Bi-Directional + Over 60 Service Reset Functions + ECU Coding + Adaptation + Intialization + Matching】LAUNCH X431 V+ PRO + HDIII can send commands to the system/component to test their working status for Active Test. Beside,this scan tool can also support ECU Coding, Key programming, Adaptation, Matching, 31+ reset service functions like SAS/EPB/TPMS/IMMO/Oil/Brake/GEARBOX Reset, ABS Bleed, Injector coding, etc... Powerful dealership level Functions can fully meet your needs.
- 👍【All Systems Diagnosis For 12V & 24V Vehicles + BEST Advanced Hardware】LAUNCH X431 V+ PRO + HDIII automotive scanner equipped with Android 9.0 operating system, 10.1-inch HD IPS(1920*1200) touchscreen, 7000mAh rechargeable battery (up to 15+ hours battery life), 32G memory(support 128G Expand memory). Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, IMMO, BMS, TPMS, SAS, Light System and A/C system. with the coverage of up to 99.99% Vehicles on the World.
- 👍【POWERFUL TECHNICAL SUPPORT】LAUNCH X431 V+ PRO 4.0& HDIII supports One-Click Auto VIN Detect, One-Click WiFi Update, One-Click Generate Graph. In addition, this LAUNCH scan tool also support remote diagnostic, diagnostic feedback and respond, Live data graphing, data Stream record and playback, Generate Health Report (Share & Print). Bring you a more convenient and comfortable experience to a large extent.
Last update on 2023-05-06 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-332 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : E-One Incorporated Submission Date : MAY 09, 2023 NHTSA Recall No. : 23V-332 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : E-One Incorporated Address : 1601 S.W. 37TH AVENUE Ocala FL 34474 Company phone : (904) 237-1122 Population : Number of potentially involved : 24 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2023 E_ONE CYCLONE N, TYPHOON N Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : The recall population was determined by serial number range of components manufactured on a specific set of dates. The recalled products differ from other products by notated serial number. QTY: 7 – 2022 CYCLONE N vehicles are affected QTY: 8 – 2022 TYPHOON N vehicles are affected QTY: 5 – 2023 CYCLONE N vehicles are affected QTY: 4 – 2023 TYPHOON N vehicles are affected Production Dates : JUL 27, 2022 – APR 24, 2023 VIN Range 1 : Begin : 4EN6AAA80N1004441 End : 4ENLABA8XP1004989 ✔ Not sequential Description of Defect : Description of the Defect : The electronic sensor/component for the Aerial device stops providing data to the operating system. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Potential damage to the vehicle body may occur. Description of the Cause : The cause is a result of a parts substitution due to shortage conditions. Identification of Any Warning that can Occur : The angle of inclination will fail to update on the display as the Aerial device is moved. Part 573 Safety Recall Report 23V-332 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Involved Components : Component Name 1 : Dual Axis Level Sensor, Single Axis Level Sensor Component Description : Dual and Single Axle Leveling Sensors Component Part Number : DINC-C-1939-M12, SINC-C-1939-DE4-53-21016 Supplier Identification : Component Manufacturer Name : Joral LLC Address : 640 Perkins Drive Mukwonago Wisconsin 53149 Country : United States Chronology : On March 15, 2023, E-ONE was contacted and told the inclination sensor stopped working during training on truck SO 144708 in Sarnia, Canada. The E-ONE Service team investigated the specific customer issue and communicated the findings to Engineering. On April 12, 2023, the Engineering team and questions were sent to and discussions were had with the Manufacturer, Joral LLC, regarding the issues found. On April 17, 2023, E-ONE was contacted that the Aerial device contacted the cab during training on another truck in Marion, Illinois, truck SO 144814. The E-ONE Service team investigated the specific customer issue and communicated the findings to Engineering. The Engineering team continued to investigate and collect more data and information and to quarantine the sensors in the E-ONE inventory. On April 27, 2023, the issue was addressed in the Product Performance Meeting and it was determined that a Recall should be initiated. On April 28, 2023, research was performed to identify the population of the affected trucks On May 8, 2023 E-ONE submitted the request to issue a Recall to REV Group. Received approval from REV Group to perform a Recall. Part 573 Safety Recall Report 23V-332 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : E-ONE will provide the necessary components or software updates, at EONE’s discretion, free of charge. E-ONE will compensate the Dealer or Owner for installing the new components provided, or perform software updates, at E-ONE’s discretion, free of charge. There is no charge to the Dealer or the Owner for this Recall. If you have already paid to have your E-ONE vehicle repaired for this condition, you may be eligible for reimbursement of the charges you paid for the repair or replacement of components. To learn more about what you need to do to obtain reimbursement call E-ONE Customer Service at 1-352-237-1122 and instructions will be provided. Please have your truck’s VIN available. If after having attempted to take advantage of this recall you believe you have not been able to have your E-ONE vehicle remedied without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1- 888-327-4236 (TTY: 1-800-424-9153); or go to http:// www.safercar.gov. How Remedy Component Differs from Recalled Component : E-ONE P/N 521347 => Dual Axis Level Sensor – DINC-C-1939-M12 E-ONE P/N 1048895 => Single Axis level Sensor – SINC-C-1939- DE4-53-21016 Serial number range: 122215 through 122294 Identify How/When Recall Condition was Corrected in Production : Components installed on trucks in process had a software patch downloaded Extra Inventory in stock was returned to manufacturer for software update. Recall Schedule : Description of Recall Schedule : 1) Email dealers a copy of the recall approximately 1 week before customers. 2) Mail customers the recall Planned Dealer Notification Date : MAY 24, 2023 – JUN 07, 2023 Planned Owner Notification Date : JUN 14, 2023 – JUN 28, 2023 * NR – Not Reported
**************************************************************************************************************
1 May 30, 2023 SAFETY RECALL NOTICE: 23V-332 TO: All E-ONE Dealers E-ONE has decided that a safety defect exists in certain E-ONE Cyclone N and Typhoon N vehicles manufactured from July 27, 2022 to April 24, 2023 equipped with Joral Sensors. Accordingly, a recall to address this issue is being initiated effective May 30, 2023. The electronic sensor/component for the Aerial device stops providing data to the operating system. Due to microprocessor shortages, the sensor manufacturer was forced to substitute a different microprocessor which was not completely compatible with the software that interacts with it. This defect could result in potential damage to the vehicle body may occur. There is a remote possibility that person injury or death could occur if the Aerial device is above ≥78º AND the truck is short-jacked AND the Aerial device is turned to within the short-jack operating range AND the sensor fails. If these four conditions occurred, it would allow the Aerial device to be lowered and could allow the truck to tip on its side. The warning that would precede the issue would be that the angle of inclination will fail to update on the display as the Aerial device is moved. Until the corrective action is implemented on a truck, E-ONE is advising the Operator of the Aerial device to monitor the angle of inclination on the display when the device is being operated to see if the value of the angle ceases to change while operating. Owners will be notified by mail about the recall and will be instructed that E-ONE will provide either new sensors OR provide a software update to the existing sensors, at E-ONE’s discretion, free of charge. E-ONE will compensate the Dealer or Owner for installing the new components provided, or perform software updates, at E-ONE’s discretion, free of charge. There is no charge to the Dealer or the Owner for this Recall. E-ONE is providing, free of charge, the necessary components and instructions to rectify the issue and will pay labor costs for inspecting and replacing the included components that have not already been replaced during normal maintenance. If you have already paid to have your E-ONE vehicle repaired for this condition, you may be eligible for reimbursement of the charges you paid for the repair or replacement of components. To learn more about what you need to do to obtain reimbursement call E-ONE Customer Service at 1-352-237-1122 and instructions will be provided. Please have your truck’s VIN available. If after having attempted to take advantage of this recall you believe you have not been able to have your E-ONE vehicle remedied without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 2 New Jersey Ave., S.E., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1- 888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. Please be reminded that it is a violation of Federal law for you to sell, lease or deliver a new or used Cyclone N and Typhoon N equipped with Joral Sensors covered by this notification until this recall has been performed on these Cyclone N and Typhoon N vehicles. Substantial civil penalties apply to violations of this law. Your assistance with this recall is appreciated. Should you have any questions or concerns, please contact E-ONE Customer Service at (352) 237-1122. Sincerely. Leroy Stephens Engineer IV – APD (352) 572-8518 lstephens@e-one.com
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END