“This site contains affiliate links for which OEMDTC may be compensated” |
May 16, 2024 NHTSA CAMPAIGN NUMBER: 24V347000
Overloaded Electrical System May Cause Fire
Overloaded electrical circuits can overheat, increasing the risk of fire.
NHTSA Campaign Number: 24V347
Manufacturer Custom Truck And Body Works
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 1
Summary
Custom Truck and Body Works (Custom Truck) is recalling one 2020 Ford F550 vehicle equipped with Weldon 8X16 Input-Output nodes. In the event of a short circuit or wiring failure, the firmware in the node may fail to shut off the output pin, resulting in overloaded electrical circuits.
Remedy
Custom Truck will update the firmware, free of charge. The owner notification letter is expected to be mailed May 31, 2024. Owners may contact Custom Truck customer service at 1-888-712-2963.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
CUSTOM TRUCK & BODY WORKS | FORD F-550 | 2020 |
2 Associated Documents
Recall 573 Report
RCLRPT-24V347-7020.PDF 212.866KB
Recall Acknowledgement
RCAK-24V347-3297.pdf 645.638KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=24V347&docType=RCL
12v
- 【Meet Different Needs】 The 12V round voltmeter comes with a panel and a nylon nut, which can be mounted separately on the 29mm diameter mounting hole or fixed on the matching panel, so that it could meet your different mounting needs.
- 【Blue LED Display】 This 12V battery meter with blue LED light, can be widely used under DC 12V 24V. With the digital voltage meter, you can easily monitor the voltage status of your car battery in real times, especially in dark environments.
- 【Waterproof & Useful】 The marine voltmeter gauge is waterproof design, so this LED voltmeter is safe to use even in moist environments. And also the mini voltmeter is fit for 12V 24V cars, automotive, motorcycles, RVs, SUV, Off-road, ATV, boats, marine, ships, trucks, tractor, etc.
- 【Measuring Range】 The rating of this battery voltage monitor is DC 8-48V, and its accuracy is 0.1V. With the precise 3-digit LED digital voltmeter, you can better monitor of the car's battery voltage status, helping to extend battery life.
- 【Easy installation】 This 12 volt battery monitor comes with a set of wires, two mounting screws, a matching panel and a nylon nut, making it easy to install and use.
- Efficient setting key: the multifunctional battery capacity indicator has a new design of the front setting button, and have several functions: cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- Humanized designs: the battery capacity voltage indicators are designed with switched function button, you can press to check the battery capacity or real-time voltage and turn off, with alarm design, the battery meter display will flash when the battery capacity is low
- Fit different battery: the battery gauge indicators are compatible with 12V/ 24V/ 36V/ 48V/ 60V/ 72V/ 84V acid battery, ternary lithium battery, polymer lithium-ion battery, 3 -15 series lithium ion battery, storage battery, water battery and more
- LCD display: the battery capacity gauge indicators come with PVC waterproof screen protector with bright back-light, which makes you can read the results on the clear LCG display from different angles, low working power consumption and the max is 5 mA
- Suitable for: the battery meters with alarms can be applied to different machines and places such as garden, home, office and more, can serve you for a long time, meeting your different needs and practical battery indicators will give you nice experience
- Universal battery capacity indicator voltage meter - wide voltage input range DC 12V-84V Lead-acid Batteries and 3S-26S Lithium Batteries: Ternary lithium batteries, polymer batteries, lithium-ion batteries, storage batteries.
- Multifunctional Battery Capacity voltage meter Indicator - Battery tester Right Switch key can switch voltmeter, battery percentage, switch off. Left setting key have several functions: Cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- High Quality of battery voltage meter - Large LCD screen display with green backlit and low power consumption.Two display modes can be available: battery symbol and battery percentage, battery symbol and voltmeter.
- Safety to Use - The battery voltage meter Built-in 30cm power cable, simple to connect. Reverse protection design, won't burn if connect reversely.
- Portable and Waterproof voltage meter- Small size, light weight, equipped with a PVC film, the surface is waterproof.
- 3 in 1 battery voltage meter - With a switched function button to choose the battery capacity, real-time voltage or turn off; New alarm function, when the battery capacity is lower 20%, the screen display will flash to alarm.(Note: package only include 1 battery meter!)
- Universial battery status monitor - wide working voltage input range DC 12V-84V.Can be automatically detect to the accurate capacity according to the battery voltage.
- Suitable for various battery types - fits to 12V/24V/36V/48V/60V/72V/84V lead acid battery, Ternary Lithium battery, Polymer lithium-ion battery, 3-28 series Lithium ion battery, Storage battery, Water battery and 4-28 series Lithium Iron Phosphate batteries, etc
- Sensitive LCD digital display - the small battery voltage reader with a PVC waterproof screen protector, clear and bright green backlight LCD display from any angle; Low working power consumption(5mA max), in additional there's a turn off button for it.
- Multifunctional application - suitable for golf cart, RV, marine, boat, club car, motorcycle, car, bike, ebike, scooter, truck, vehicle, jet ski, forklift
- Fits for DC 12V/24V cars, test range: DC 7V-35V; Each voltage meter has passed QC test prior to shipping
- Made of high quality PC material, durable and waterproof, works well in wet enviroment
- EASY TO READ: Bright and clear led digital display, reads fine on any light condition
- EASY TO INSTALL: Comes with mounting plates, tightening rings, spade connectors and screws for easy installation and wiring
- Measurement Accuracy: 0.1V-0.2V, perfect for car/motorcycle/RV/truck/boat/ATV/UTV etc.
- HIGH PERFORMANCE DUAL USB CHARGING PORTS - 24W / 4.8A USB Car Charger charges your favorite mobile devices Compatible for iPad (max speed), iPhone XS, XR, 8 Plus (max speed), HTC, Galaxy, MP3 Players, Digital Cameras, PDAs, Mobile Phones.
- REAL-TIME MONITORING - Concise LED screen displays vehicle’s operating voltage (12V/24V) or the total USB charging output (5V/4.8A Max) in real time, fully controlling the whole charging process. The LEDs are bright enough to read the display without being a distraction while driving.
- SAFE ON THE GO - Intelligent circuit design protects against short circuiting, over-heating, over-currents, and over-charging. Charging stops when battery is full.
- COMPACT DESIGN - One of the industry's smallest USB car chargers for added portability, featuring two USB ports and an LED Display make it easy to access after dark. Input: 12-24V; Output: DC 5V 4.8A or 24W (Shared by two ports). One Year Warranty.
- 12 MONTHS WARRANTY - Comes with 30 days Money Back Guarantee and 12-Months Hassle-free Replacement Warranty.
- What you get: you will receive 1 pieces of double voltmeters, which remind you of charge or replacement in time, effectively avoid emergent dead battery at starting car engine
- Practical LED digital display: the double voltmeters are embedded in 3-bit LED digital display, clearly shows you the current precise readings of working volts, well helps you to early notice your car voltage condition
- Wide range of application: large input of up to DC 60V with over-current, over-volt and short circuit protection, well protects the whole circuit, fits for most 12-24V car, motorcycle, RV vehicles and boats
- Reliable material: made of flame retardant and durable nylon material, good conductivity pins with black matte surface treatment, wear and tear resistant, suitable for long lasting usage
- Convenient to install: panel mount and easy to install, drill size measures approx. 1.15 inch in diameter, with locking fastener for stable mounting, fits to almost all panel locations you desired
- 🔋【Essential Tool for Your Garage】Don't let your car battery suffer from the damaging effects of disuse or harsh climates. BM300 can help monitor your battery health, including Voltage, Cranking, Charging system and travel records. Quickly reads data (Accuracy over 99.5%) to determine if the car battery is abnormal and take appropriate measures to protect the battery.
- 🔋【Easier Monitoring with Bluetooth Connection】Say goodbye to standing in front of the monitor during the monitoring process! 3.2-ounce battery monitor allows you to sit comfortably in your car or anywhere within 33ft range and monitor real-time battery data for proactive intervention. Whether it's raining, sunny, or snowy, easily conduct real-time monitoring of the battery from the comfort of your car.
- 🔋【Hassle-free Monitoring of Once Installation】Install once and permanently attach to your battery, saving the hassle of repetitive installation. Access battery health data directly from your phone and enjoy real-time monitoring as long as the APP is on. In addition, with an average power consumption of only 1.5mA that it can be almost unnoticeable. So you don't have to worry about the BM300 draining your battery by being attached to it all the time.
- 🔋【Quality Assurance with Safety as Priority】Built-in electrical overload circuit breaker with reverse polarity protection function ensures user safety during operation. The fire-resistant housing enhances high-temperature durability for added safety. In addition to these safety features, it also boasts exceptional alarm functionality. Which will notify you via the APP when the battery encounters malfunctions, abnormal voltage or power, alleviating your concerns in this regard.
- 🔋【Trustworthy Original Material】Automotive battery monitor is built to withstand extreme conditions with its durable ABS shell, providing top-notch impact resistance. The connectors are designed with red and black rubber grips for easy placement on the battery terminals, making for efficient testing to achieve the best performance.
- Switch Control:The voltage gauge waterproof a more accurate battery voltage. You can toggle between voltage and battery percentage or turn it off to reduce battery drain while in storage.
- oltage Gauge: Support 5-48V Input Voltage. Power display range 0-100%. Precise 3-bit LED digital display.
- Check States: Battery Capacity Voltage Monitor Gauge Indicator better helps you to early notice your car voltage condition.
- Widely Use: Fit for 5-58V Cars, Motorcycles, RV, SUV, Off-road, ATV, Boat, Marine, Ship, Truck, Tractor etc.Mini size and easy to install.
- Package Includes: 1 x Car Voltmeter Gauge; 2 x Insulated Terminals; 2 x Screws, 2 x Wires.
- Compact & Effortless Installation: Mini-sized and added wires designed for convenience and easy installation. This digital car voltmeter has a measurement range from 5V to 30V, ensuring compatibility with various power systems.
- Clear LED Display: Equipped with a precise 3-bit LED digital display, facilitating easy readability. Enables real-time monitoring of battery voltage, providing instant insights into your battery's status.
- Battery Status at a Glance: Timely awareness of battery voltage between full charge and discharge, ensuring proactive maintenance and optimal performance.
- Complete Package: Each package includes 1 Car Voltmeter Gauge, 2 wires, and 2 Screws.
- Versatile Compatibility: Compatible with a wide range of vehicles, including Cars, Motorcycles, RVs, SUVs, Off-road vehicles, ATVs, Boats, Marine vessels, Ships, Trucks, Tractors, and more. Supports both 12V and 24V systems.
Last update on 2024-06-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-347
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Custom Truck And Body Works MAY 16, 2024 NHTSA Recall No. : 24V-347 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Custom Truck And Body Works Address : 13787 Whitehouse Parkway
Woodbury GA 30293
Company phone : 7065539178
Population :
Number of potentially involved : 1
Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2020-2020 Ford F550 Vehicle Type : LIGHT VEHICLES Body Style : 2-DOOR Power Train : DIESEL
Descriptive Information : Recall products have a different firmware version than those not included in the recall Production Dates : MAY 18, 2020 – AUG 03, 2020
VIN Range 1 : Begin : 1FD0X5HT2LED53169 End : 1FD0X5HT2LED53169 Not sequential Description of Defect :
Description of the Defect : The electrical current sensing calibration was not produced to specification so that the firmware would not shut off the output pin under a short circuit caused bt external load or wiring failure
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : In the event of a short circuit or wiring failure, if the electrical circuit become overloaded, depending on how the input-output node is wired into the vehicle including whether it is located near a flammable fuel source, there is an increased of heat related damage or fire.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
None
Involved Components : Part 573 Safety Recall Report 24V-347
Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Component Name 1 : 8 x 16 Input-Output Node Component Description : Input – Output Node Component Part Number : 6030-2000-00
Supplier Identification : Component Manufacturer
Name : Weldon Division of Akron Brass Address : 3656 Paragon Drive
Columbus Ohio 43228
Country : United States
Chronology :
NR
Description of Remedy :
Description of Remedy Program : Will have the vehicle brought to our location to get the Node updated to
the correct firmware How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : Firmware version number on the device determines the range of devices that shall be recalled. Version 1.00 – 1.02 to be recalled
Will have the vehicle returned to our plant in order for the firmware to be updated and tested
Recall Schedule :
Description of Recall Schedule : Will send a letter and phone call to the customer Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : MAY 17, 2024 – MAY 31, 2024
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END