| “This site contains affiliate links for which OEMDTC may be compensated” |
May 3, 2024 NHTSA CAMPAIGN NUMBER: 24V313000
Rear Liftgate Installed Incorrectly
A liftgate that falls unexpectedly increases the risk of injury.
NHTSA Campaign Number: 24V313
Manufacturer Forest River, Inc.
Components STRUCTURE
Potential Number of Units Affected 54
Summary
Forest River, Inc. (Forest River) is recalling certain 2011, 2016-2019, 2021-2024 Rockport Work Trucks. The rear liftgate may have been installed without a U-bolt on the driver and passenger side, which can allow the liftgate to fall to the ground when loaded.
Remedy
Dealers will inspect and replace the U-bolts, as necessary, free of charge. Owner notification letters are expected to be mailed June 12, 2024. Owners may contact Forest River Customer Service at 1-574-522-7599. Forest River’s number for this recall is 65-1700.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
In February 2024, the manufacturing division received a complaint of the rear lift gate cantilevering and falling to the ground. The manufacturing plant determined this to be a single incident and fixed the vehicle.
On April 24, 2024, the manufacturing plant received an additional complaint from a separate complaint of the same failure.
On April 25, 2024, the manufacturing plant contacted Forest River’s Office of Corporate Compliance (“OCC”), and a research item was opened.
On May 3, 2024, Forest River’s Corporate Recall Committee voted to recall.
9 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| FOREST RIVER | ROCKPORT | 2011, 2016-2019, 2021-2024 |
3 Associated Documents
Defect Notice 573 Report
RCLRPT-24V313-9602.PDF 215.693KB
Recall 573 Report – 5/3/2024
RCLRPT-24V313-1687.PDF 215.757KB
Recall Acknowledgement
RCAK-24V313-3809.pdf 645.997KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=24V313&docType=RCL
- Liftgate Lift Assist System Features: 2-sided Assist Which Prevents Uneven Stresses and Wear on the Tailgate Ramp and Trailer and Can Help to Extend the Life of the Trailer Gate.
- Compatible with Most Open Utility Trailers with 12" to 24" Side Rails and 4' to 6' Height Tailgate or Ramp.
- Drilling is Required for Installation, and the Tailgate Can Be Easily Lifted by Hand After Installation, making the Tailgate and Ramp of the Multifunctional Trailer Almost Weightless.
- Load Capacity : 300 Lbs; Material: Steel; Finish: Powder-coat. Include Installation Instructions, 59.06’’ Wirerope and Mounting Hardware As Pictures Shown.
- [Applicability] This tailgate ramp lift assist system is suitable for most open utility trailers and is compatible with most open utility trailers with 12" to 24" side rails and 4" to 6" height tailgates or ramps.
- [Advantage] The Double Side Assist System can be easily installed on utility trailers with square, round or angled side rails. Can prevent uneven stress and wear on tailgate ramps and trailers and can help extend the life of trailer doors. Maximum weight capacity is 300 lbs. Lift system is fully enclosed for safety.
- [Quality Material] The product is made of heavy-duty thick steel with welded one-piece design for extreme durability. The surface is sprayed with yellow powder coating, and the anti-corrosion and anti-rust coating can extend the long service life.
- [Easy Installation] Drilling is required for installation, and the tailgate can be easily lifted by hand after installation, making the tailgate and ramp of the utility trailer virtually weightless.
- [Package Includes] 1 pair of double sided assist systems, 2 x 59.06" wire rope and all mounting hardware.
- This lift gate ramp lift assist system features a 2-sided assist which prevents uneven stresses and wear on the tailgate ramp and trailer and can help to extend the life of the trailer gate.
- Welded one piece design for extreme durability. Yellow powder coated to ensure long life and continued good looks.
- The item can be quickly and easily installed on trailer side rails made of square tubing, round tubing or angle iron. The unit fits on open utility trailers with side rails measuring 12’’ to 24’’ in height, and tailgates or ramps measuring 4ft. to 6ft, with a maximum weight of 300 lbs.
- Effortlessly raise or lower the trailer tailgate, lifting force is adjustable to bear different tailgate weights, tailgate lifting system is fully enclosed for safety.
- Load Capacity : 300 Lbs; Material: Steel; Finish: Powder-coat. Include installation instructions, 59.06’’ wirerope and mounting hardware as pictures shown.
- One 15’ coiled, dual pole liftgate electric cable with 2 x 12” leads. Two dual pole buffalo plugs with spring guards, bonded positive and negative conductors.
- 4 gauge fine strand copper wire, 200 amp maximum current capacity for typical 12 volt intermittent tailgate use.
- Jacket hose cover resists gasoline, diesel fuel, and commonly used chemicals. Designed to maintain flexibility in temperatures of -85°F (-65°C). Approximate dimensions = 15’ working length
- We have chain stores in the local area (42 states) that can quickly transport your products, and all products come with a one-year warranty!
- Model: LYAM-468 Material: Steel Surface Finish: Powder-Coated Installation Instructions: Included Number of packages: 1 Load Capacity (lbs.): 350 Each measures 2in. x 2in. x 72in.L
- This lift gate ramp lift assist system features a 2-sided assist which prevents uneven stresses and wear on the tailgate ramp and trailer and can help to extend the life of the trailer gate.
- The item can be quickly and easily installed on trailer side rails made of square tubing, round tubing or angle iron. The unit fits on open utility trailers with side rails measuring 10’’ to 24’’ in height, and tailgates or ramps measuring 4ft. to 6ft, with a maximum weight of 350 lbs.
- Effortlessly raise or lower the trailer tailgate, lifting force is adjustable to bear different tailgate weights, tailgate lifting system is fully enclosed for safety.
- [Applicability] Replacement spring and cable kit for trailer tailgate lifts. Installed on the liftgate ramp lift assist system will fit most open utility trailers. The dual spring kit has a smaller spring inside a larger outer spring. Works just like the original unit at an affordable price.
- [Quality Materials] Our trailer lift assist is made of heavy-duty steel with anti-corrosion and rust-resistant coating to extend long service life. Lifting force is adjustable to accommodate different tailgate weights. The cable has a maximum travel of 4 feet.
- [Advantage] With our utility trailer accessory installed, the tailgate can be easily lifted with one hand, making the tailgate and ramp of the utility trailer virtually weightless.
- [Esay to Install] Our lift components are rigorously tested with state-of-the-art manufacturing processes, easy to install, simply remove the old spring and cable kit and replace with a new one.
- [Package Included] 2pcs Replacement spring and cable kit for trailer tailgate lifts.
- This is the one and only Genuine GORILLA-LIFT.
- Makes heavy-duty utility trailer tailgates virtually weightless, allowing them to glide up and down with the slightest touch.
- Helps prevent costly injuries and property damages. Helps prevent very heavy-duty, commercial-use tailgates from warping and sustaining hinge damage.
- Is adjustable to work on different size and weight tailgates. Works on all open utility trailers with side rails 12-in. to 24-in. tall and tailgates 4-ft. to 6-ft. tall.
- Has a low profile housing that fully encloses the lifting mechanism for added safety.
- Dump trailer remote control switch, double buttons control up and down,easy to press.It is a perfect substitute for single/double-acting hydraulic power plant.
- Specifications:Voltage:12VDC;Product Specification: 2.8"x2.1"x5.4"(L*W*H);Push Buttons: UP/DN;Type: Momentary.
- Wide Use,Suitable for most single/double-acting hydraulic pump stations.Suitable for dump trailers, dump trucks, liftgates, elevators, stackers, cranes, etc.
- The shell is made of ABS material,heat-resistant, corrosion-resistant, high safety factor.The switch is small in size and easy to carry. Dustproof and waterproof design,you can safely use it outdoors.The back is designed with magnets, which can be adsorbed and placed or hung.In addition, it has a separate mounting bracket, which can be fixed on the wall with screws, which is convenient for placing and taking the switch.
- Easy installation,you can connect 3 or 4 wires,simple and diverse connection methods.
- 【 ★High Quality Material】The Trailer Gate Lift Assist System is made of heavy duty thick steel,durability. The surface is sprayed with yellow powder coating,anti-corrosion,anti-rust coating and long service life.
- 【 ★Easy To Install】The 2-sided tailgate utility trailer gate & ramp lift assist system has undergone a rigorous testing.Drilling is required for installation, and the tailgate can be easily lifted by hand after installation, making the tailgate and ramp of the utility trailer virtually weightless.
- 【 ★Suits for】 This liftgate ramp lift assist system is suitable for most open utility trailers.Compatible with most open utility trailers with 12 "to 24" side rails and 4 "to 6" height tailgates or ramp.
- 【 ★Advantage】2 Side lift system helps prevent uneven wear, adjust lift force to suit different tailgate weights.
- 【 ★Package Included】1 pairs of double sided assist systems, 2x59.06" wire rope and all mounting hardware
- Part Number: 264951-04 26495104
- Compatible with Compatible with TE GPT 25 Box Trucks Trailer Liftgate
- Condition: New
- 1 Year Warranty. Please feel free to contact us we will give quick response asap
Last update on 2024-06-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-313
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Forest River, Inc. MAY 03, 2024 NHTSA Recall No. : 24V-313 Manufacturer Recall No. : 65-1700
Manufacturer Information :
Manufacturer Name : Forest River, Inc.
Address : 55470 CR 1
P.O. Box 3030 Elkhart IN 46515-3030 Company phone : 1-800-348-7440
Population :
Number of potentially involved : 54 Estimated percentage with defect : 100 %
Vehicle Information : Part 573 Safety Recall Report 24V-313 Page 2 Vehicle 1 : 2011-2024 Forest River Inc. Rockport Work Trucks Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : NR
Descriptive Information : The scope was determined by the inception of the installation of the rear lift gates at the manufacturing plant.
Model year Product name Unit item USA 2011 ROCKPORT RP5A2470-65 1
2016 ROCKPORT RP5A2670-65 1
2017 ROCKPORT RP5A2070-65 4
2017 ROCKPORT RP5A2470-65 5
2017 ROCKPORT RP5A2670-65 1
2018 ROCKPORT RP5A2070-65 3
2018 ROCKPORT RP5A2270-65 1
2018 ROCKPORT RP5A2470-65 1
2018 ROCKPORT RP5A2670-65 1
2019 ROCKPORT RP5A2410296-65 1
2019 ROCKPORT RP5A26102102-65 1
2019 ROCKPORT RP5A26102108-65 1
2021 ROCKPORT RP5A269696-65 1
2022 ROCKPORT RP5A249696-65 1
2022 ROCKPORT RP5A249696-DH-65 2
2023 ROCKPORT RP5A2210290DH-65 4
2023 ROCKPORT RP5A229696DH-65 1
2023 ROCKPORT RP5A24102102-65 1
2023 ROCKPORT RP5A2410290DA-65 1
2023 ROCKPORT RP5A249696-DH-65 2
2023 ROCKPORT RP5A26102102DA-65 2
2023 ROCKPORT RP5A26102102DH-65 5
2023 ROCKPORT RP5A269696-DA-65 2
2023 ROCKPORT RPAF1266WN-65 1
2024 ROCKPORT RP5A2010296-65 5
2024 ROCKPORT RP5A249696-65 1
2024 ROCKPORT RP5A249696-DH-65 1
2024 ROCKPORT RP5A26102102-65 2
2024 ROCKPORT RP5A2610296DA-65 1
Grand Total 54 Production Dates : SEP 09, 2016 – FEB 22, 2024
VIN Range 1 : Begin : NR End : NR Not sequential The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-313 Page 3 Description of Defect :
Description of the Defect : The rear liftgate may not have been installed correctly, missing a U-bolt on the driver and passenger side at the rear part of the lift gate tube that clamps to the truck body chassis. This condition may allow the lift gate to cantilever when loaded and fall to the ground.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : If the U-bolts are missing, this condition may allow the lift gate to cantilever when loaded and fall to the ground, increasing the risk for personal injury, or property damage.
Description of the Cause : Manufacturing installation error of the liftgate. Identification of Any Warning
that can Occur : The rear lift gates’ chassis framework may appear to bend downward. Involved Components : Component Name 1 : Rear Lift Gate Chassis Mount U-Bolts
Component Description : Rear Lift Gate Chassis Mount U-Bolts This is not a component failure but rather an installation error during manufacturing.
Component Part Number : N/A Supplier Identification : Component Manufacturer
Name : NR Address : NR
NR
Country : NR Chronology :
In February 2024, the manufacturing division received a complaint of the rear lift gate cantilevering and falling to the ground. The manufacturing plant determined this to be a single incident and fixed the vehicle. On April 24, 2024, the manufacturing plant received an additional complaint from a separate complaint of the same failure. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-313 Page 4 On April 25, 2024, the manufacturing plant contacted Forest River’s Office of Corporate Compliance (“OCC”), and a research item was opened. On May 3, 2024, Forest River’s Corporate Recall Committee voted to recall. Description of Remedy :
Description of Remedy Program : Forest River will provide all parts and labor free of charge to Consumers
and Dealers. An authorized Forest River Dealer or Service Center will need to perform the remedy. The U-Bolts will be inspected and replaced if mounted in the incorrect location. What is the Forest River Customer Service Phone Number? (574) 522-7599 If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall inspected and/or performed to ensure the correct parts and procedures were utilized. Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope of this defect under recall.
Please send the service invoice to the following address: Rockport
914 County Road 1
Elkhart, IN 46516 How Remedy Component Differs from Recalled Component : Affected Component – Rear Lift Gate Chassis Mount U-Bolts
This is not a component failure but rather an installation error during manufacturing.
PN – N/A Identify How/When Recall Condition was Corrected in Production : On April 25, 2024, the manufacturing plant inspected all vehicles in their control at the plant to ensure the proper installation of the liftgate. Those vehicles that were not installed correctly were remedied before shipment. Recall Schedule :
Description of Recall Schedule : Forest River has the utmost urgency in our recalls. Forest River will send
suspected VIN numbers to our third party vendor that is licensed to pull data on the current owner of the vehicles (as needed) once a formal NHTSA I.D. is provided. Forest River intends on pushing the mailing out as soon as NHTSA provides any correction(s) and an Acknowledgement Letter.
Planned Dealer Notification Date : JUN 12, 2024 – JUN 12, 2024
The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-313
Page 5
The information contained in this report was submitted pursuant to 49 CFR §573 Planned Owner Notification Date : JUN 12, 2024 – JUN 12, 2024
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-313
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Forest River, Inc. MAY 03, 2024 NHTSA Recall No. : 24V-313 Manufacturer Recall No. : 65-1770
Manufacturer Information :
Manufacturer Name : Forest River, Inc.
Address : 55470 CR 1
P.O. Box 3030 Elkhart IN 46515-3030 Company phone : 1-800-348-7440
Population :
Number of potentially involved : 54 Estimated percentage with defect : 100 %
Vehicle Information : Part 573 Safety Recall Report 24V-313 Page 2 Vehicle 1 : 2011-2024 Forest River Inc. Rockport Work Trucks Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : NR
Descriptive Information : The scope was determined by the inception of the installation of the rear lift gates at the manufacturing plant.
Model year Product name Unit item USA 2011 ROCKPORT RP5A2470-65 1
2016 ROCKPORT RP5A2670-65 1
2017 ROCKPORT RP5A2070-65 4
2017 ROCKPORT RP5A2470-65 5
2017 ROCKPORT RP5A2670-65 1
2018 ROCKPORT RP5A2070-65 3
2018 ROCKPORT RP5A2270-65 1
2018 ROCKPORT RP5A2470-65 1
2018 ROCKPORT RP5A2670-65 1
2019 ROCKPORT RP5A2410296-65 1
2019 ROCKPORT RP5A26102102-65 1
2019 ROCKPORT RP5A26102108-65 1
2021 ROCKPORT RP5A269696-65 1
2022 ROCKPORT RP5A249696-65 1
2022 ROCKPORT RP5A249696-DH-65 2
2023 ROCKPORT RP5A2210290DH-65 4
2023 ROCKPORT RP5A229696DH-65 1
2023 ROCKPORT RP5A24102102-65 1
2023 ROCKPORT RP5A2410290DA-65 1
2023 ROCKPORT RP5A249696-DH-65 2
2023 ROCKPORT RP5A26102102DA-65 2
2023 ROCKPORT RP5A26102102DH-65 5
2023 ROCKPORT RP5A269696-DA-65 2
2023 ROCKPORT RPAF1266WN-65 1
2024 ROCKPORT RP5A2010296-65 5
2024 ROCKPORT RP5A249696-65 1
2024 ROCKPORT RP5A249696-DH-65 1
2024 ROCKPORT RP5A26102102-65 2
2024 ROCKPORT RP5A2610296DA-65 1
Grand Total 54 Production Dates : SEP 09, 2016 – FEB 22, 2024
VIN Range 1 : Begin : NR End : NR Not sequential The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-313 Page 3 Description of Defect :
Description of the Defect : The rear liftgate may not have been installed correctly, missing a U-bolt on the driver and passenger side at the rear part of the lift gate tube that clamps to the truck body chassis. This condition may allow the lift gate to cantilever when loaded and fall to the ground.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : If the U-bolts are missing, this condition may allow the lift gate to cantilever when loaded and fall to the ground, increasing the risk for personal injury, or property damage.
Description of the Cause : Manufacturing installation error of the liftgate. Identification of Any Warning
that can Occur : The rear lift gates’ chassis framework may appear to bend downward. Involved Components : Component Name 1 : Rear Lift Gate Chassis Mount U-Bolts
Component Description : Rear Lift Gate Chassis Mount U-Bolts This is not a component failure but rather an installation error during manufacturing.
Component Part Number : N/A Supplier Identification : Component Manufacturer
Name : NR Address : NR
NR
Country : NR Chronology :
In February 2024, the manufacturing division received a complaint of the rear lift gate cantilevering and falling to the ground. The manufacturing plant determined this to be a single incident and fixed the vehicle. On April 24, 2024, the manufacturing plant received an additional complaint from a separate complaint of the same failure. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-313 Page 4 On April 25, 2024, the manufacturing plant contacted Forest River’s Office of Corporate Compliance (“OCC”), and a research item was opened. On May 3, 2024, Forest River’s Corporate Recall Committee voted to recall. Description of Remedy :
Description of Remedy Program : Forest River will provide all parts and labor free of charge to Consumers
and Dealers. An authorized Forest River Dealer or Service Center will need to perform the remedy. The U-Bolts will be inspected and replaced if mounted in the incorrect location. What is the Forest River Customer Service Phone Number? (574) 522-7599 If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall inspected and/or performed to ensure the correct parts and procedures were utilized. Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope of this defect under recall.
Please send the service invoice to the following address: Rockport
914 County Road 1
Elkhart, IN 46516 How Remedy Component Differs from Recalled Component : Affected Component – Rear Lift Gate Chassis Mount U-Bolts
This is not a component failure but rather an installation error during manufacturing. The liftgate is manufactured at Forest River’s manufacturing plant using several parts from different vendors. The U- Bolts were installed in the wrong location.
PN – N/A Identify How/When Recall Condition was Corrected in Production : On April 25, 2024, the manufacturing plant inspected all vehicles in their control at the plant to ensure the proper installation of the liftgate. Those vehicles that were not installed correctly were remedied before shipment. Recall Schedule :
Description of Recall Schedule : Forest River has the utmost urgency in our recalls. Forest River will send
suspected VIN numbers to our third party vendor that is licensed to pull data on the current owner of the vehicles (as needed) once a formal NHTSA I.D. is provided. Forest River intends on pushing the mailing out The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-313
Page 5
The information contained in this report was submitted pursuant to 49 CFR §573
as soon as NHTSA provides any correction(s) and an Acknowledgement Letter.
Planned Dealer Notification Date : JUN 12, 2024 – JUN 12, 2024
Planned Owner Notification Date : JUN 12, 2024 – JUN 12, 2024
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END