“This site contains affiliate links for which OEMDTC may be compensated” |
March 7, 2024 NHTSA CAMPAIGN NUMBER: 24V180000
Reversed Wires in Rear Turn Signal/FMVSS 108
Turn signals that do not function as intended may confuse other road users, increasing the risk of a crash.
NHTSA Campaign Number: 24V180
Manufacturer Navistar, Inc.
Components EXTERIOR LIGHTING
Potential Number of Units Affected 38
Summary
Navistar, Inc. (Navistar) is recalling certain 2025 International LT vehicles. Two wires in the taillight jumper harness may be reversed, causing the turn signal to activate in the opposite direction of what the driver intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Dealers will replace the taillight jumper harness, free of charge. Owner notification letters are expected to be mailed May 6, 2024. Owners may contact Navistar customer service at 1-800-448-7825. Navistar’s number for this recall is 24506.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
- 01/30/2024 – During a pre-delivery inspection, Navistar Manufacturing sends communication to Navistar Quality that a vehicle was found with the rear turn signals flashing in the opposite direction due to two wires reversed in the tail lamp jumper harness.
- 01/31/2024 – Navistar issues a ship hold at the assembly plant and initiates inspections of quarantined vehicles.
- 02/02/2024 – Navistar meets with the supplier to discuss the issue and to review the supplier’s processes and opens investigation to determine if there are any vehicles impacted in the field.
- 02/05/2024 through 02/23/2024 – Navistar Manufacturing inspects 179 units and repairs five. A customer/dealer inspection was inconclusive as to the presence of the issue in units that made it out of Navistar control.
- 02/26/2024 – Navistar Quality, Manufacturing, and Product Safety meet to review the vehicle inspection/failure data and determine that vehicles with suspect jumper harnesses were assembled at the supplier on the second shift of 12/20/2024.
- 02/28/2024 – Navistar Product Safety finalizes the suspect population.
- 02/29/2024 – Navistar declares a Non Compliance Recall.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
INTERNATIONAL | LT | 2025 |
2 Associated Documents
Defect Notice 573 Report
RCLRPT-24V180-7882.PDF 214.641KB
Recall Acknowledgement
RCAK-24V180-8517.pdf 645.436KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=24V180&docType=RCL
- Compatibility: Suitable for most 12V motorcycles. Note: some models require a load resistor or flasher relay when replacing turn signal Light
- High Quality: Our product features an aluminum alloy casing that is wear-resistant, shock-resistant, and easy to dissipate heat
- IP67 Protection: Waterproof and dustproof, unaffected by harsh weather conditions, and extends the lifespan of the LED
- Easy to Install: Black Wire is Negative, Red Wire is Turn Signal Light
- Professional Service: We are committed to providing good customer experience, if you have any questions about our product, please do not hesitate to contact us
- Ultra Bright Brightness: mini stalk arrow light motorcycle turn signals lights is very small, with beautiful LED lights; It is composed of 14 ultra high brightness amber LED lights, which makes it safer to ride motorcycles at night; Note: please confirm that the size meets your needs before purchasing
- Package Contents: you will receive 4 pieces motorcycle indicators flowing turn signal lights, black shell, amber lights, the number of turn signals is enough to meet your motorcycle's daily using and replacement, you can also share them with your friends, lover, and family member
- Parameter Information: the working voltage: voltage of motorcycle lamp: 12V; Power: about 1.5W; Color temperature: 3500K; Service life: 50000H, can provide efficient and continuous brightness, and please check the related data carefully before buying; Note: the installation voltage cannot exceed 14V, the normal voltage is 12v
- Convenient to install: motorbike LED indicator blinker amber lamp is simple and easy to install and can be directly bolted for general installation; It only takes a few minutes to complete the installation, allowing your motorcycle to emit bright lights in the dark
- Good compatibility: the motorcycle indicators flowing turn signal lights are compatible with a variety of 12 V locomotives, straddle locomotives, motorcycles, electric vehicles, ATVs, off-road motorcycles, cars, etc., practical enough to meet you a plenty of using needs
- (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high brightness chips per bulb, Working Voltage: 9v-30v (fit 12V, 24V vehicles).
- Fits: 3056 3057 3057K 3057LL 3155 3157 3157A 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3356 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4157 4157LL 4157K 4157NA 4157NAK etc. Easy installation, plug and play.
- Application: Turn Signal Lights, Brake Lights, Tail Lights, Side Marker Lights, Corner Lights, Blinker Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage: Non-polarity design, Compatible for both CK/SRCK and Standard socket. More than 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- 【Compatibility】8mm mounting bolt, universal fit for cafe racer cruiser adventure motorcycles with 8mm bolt turn signals. Compatible with harley sportster dyna electra glide fatboy heritage softail iron road glide road king, honda goldwing shadow, kawasaki vulcan, yamaha bolt road star v star and so on
- 【 Mini Size Super Bright】built-in 4pcs led chips per turn signals, much brighter than factory halogen bulbs. Super bright light output makes your direction signal much easier noticed by oncoming and rear vehicles to increase safety. Customized design greatly improves your motorcycle's appearance.
- 【Aluminum Alloy Housing】This turn signal lights made of CNC machining aluminum alloys, no faded after long time exposure, corrosion and abrasion resistance. prevent from oxidizing and scratches. Provide a longer service time.
- 【Easy Installation】Direct replacement for old dull turn signals. 2-wire configuration, black- negative, yellow - turn signal light, just remove old blinkers and replace with the new signal lights. It's easy for the person who even lack maintenance experience. NOTE: This tiny led turn signals are smaller than the factory light, please pay attention to the size before placing an order.
- 【Buy with Confidence】 You will get 2 pairs mini size bullet turn signals light, You are backed by 12-Month warranty since the order purchase date. Please feel free to contact us if you have any questions about the motorbike turning indicators.
- Compatibility:【LED turn signals inserts】It is LED turn signals fits for Harley with 2" bullet style models. ➵For Touring : Street Glide,Street Glide Special ,Road Glide ,Road Glide Special,Road King Special(Excluding CVO/Limited/Classic/Ultra) .➵For Sportster :Iron883, iron 1200, SuperLow 72 48,883R 1200T,1200 Low ect.
- Compatibility:【2 inches turn signals】➵for Dyna : Wide Glide, Street Bob, Low Rider , Fat Bob ect.➵For Softail :Sport Glide,Slim, Low Rider, Fat Boy, Fat Bob,Fat Boy S,Low rider S ect.
- Light Performance:【81 LEDS Extremely Bright】Switchback Design Lighting ,300% brighter than halogen bulbs.Front 1157 blinker available in two color, white for running light, amber for turn signals.Rear lights are red colors.This LED turn signals allows you to be more noticeable.it have a long life and fit the motorcycle system perfectly.
- Smoke Lenses:【Upgrade Versions and Excellent Light Transmission】Made of high-quality PC plastic with special protective coating, the signal lights lens cover can protect the turn signal light inside from being damaged by dust, dirt and other factors.Maintaining clear visibility without weakening the turn signals.
- Light Installation:【Plug-and-play and Integrated handle design】The LED turn signals are plug-and-play on models with front and rear bullet style housings.
- Resembling halogen bulb shape design and sequencing 54 4014-SMD LED chips precisely around the 3157 led amber bulb. Delivering 360° high luminous efficiency with full amber light. Much easier noticed and much more safer driving
- 5.5W per 3157 amber led bulb. Only 1/4 energy consumption of original bulb but 4 times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
- Electroplating process housing. Improve oxidation resistance and produce less heat. High-grade shape, matching great in the assembly. Ideal replacement for your halogen bulbs
- Small size comparable to OEM bulbs. Non-polarity, applied to US standard and CK sockets. Can be used for turn signal bulb, side marker light bulb, blinker light bulb, parking lights, etc. Fits: 3056 3156 3157 3157K 3057A 4057 4157, etc.
- Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your owner manual to confirm or ask a question for help
- 【Durable Material】: Our motorcycle turn signals are made of ABS material, which is wear-resistant, lightweight, and IP67 waterproof. So it's perfect for riding on the road and will keep you safe even in rainy or stormy weather.
- 【Super Bright】: This motorcycle indicator uses the latest upgraded LED, not only has a super brightness and lower power consumption than traditional lights. They can be used as turn signal lights, DRL lights, and brake Light, provides you more on-road warning lights options.
- 【Flowing Light Mode】: We use a unique LED flow design to make the turn signals more effective to attract the eye. It is dazzling but does not dazzle other people's eyes. Warm tip: If the running turn signal wiring appears after it is only half bright or flashing too fast, is the flashers caused. You just need to remove the flasher or replace it with a speed-adjustable flasher to solve the problem.
- 【Universal Turn Signal Lights】: Compatible with the most popular makes and models of motorcycle motocross bikes such as Honda, Yamaha, Suzuki Kawasaki, BMW, DUCATI, BUELL, APRILI and many more.
- 【Best Service】: Customer satisfaction is our top priority. If you have any questions, please feel free to contact us. We will solve your problem in the first time to ensure your best shopping experience.
- 【Super bright】- These motorcycle-led turn signals have 12 (335 LED) super bright LED beads, low power consumption, and high brightness, and are not easy to heat up. The motorcycle amber LED indicators are not only suitable for night driving but also very bright and conspicuous in the daytime.
- 【Waterproof and Long-Lasting】- Motorcycle turn signals have an IP67 waterproof rating, which can be used in various bad weather conditions. The flexible rubber connection base is not easy to break, effectively preventing breakage. The wire is made of copper core, strong conductivity does not easily get hot, high safe. The service life is up to 30000 hours, giving you a better product experience.
- 【Easy to install】-Motorcycle turn signals led are suitable for most models and very easy to install. The black wire is the negative pole, and the red wire is the positive pole and can be installed directly on the original indicator. Install the product correctly to achieve the best effect.
- 【Flowing design】- The motorcycle indicator is a flowing design, which can better express the direction you need to change, better than the direction warning light. The smooth mounting design can bring you more safety when driving at night.
- 【Complete Satisfaction】- This motorcycle turn signal light comes in a set of 2 and fits most 12 V motorcycles. We offer high-quality support for this 12 V motorcycle LED indicator.
- Compatible with 2007-2017 Jeep Wrangler JK or Unlimited
- One pair (driver and passenger sides) dark/bl;ack smoke cover lens full LED turn signal light asssembly with CAN-bus decoders to prevent LED blinker from hyper flash
- Powered by amber yellow super bright LED for the signal blinker function and xenon white LED vertical beams for parking/position light (can also function as DRL daylight function)
- Give your Wrangler an upgrade a modern and dynamic LED appearance with enhanced safety & visibility at night
- Since the LED light has lower wattage, please make sure to install the provided load resistor decoder to prevent LED turn signal lighting from hyper flashing
- Package contains: you will receive 4 pieces motorcycle indicators flowing turn signal lights, black shell, amber lights, the number of turn signals is enough to meet your motorcycle's daily using and replacement, you can also send them to your friends, lover, and family member
- Ultra-bright brightness: mini stalk arrow light motorcycle turn signals lights is very small, with beautiful and charming LED lights; It is composed of 14 ultra-high-brightness amber LED lights, which makes it safer to ride motorcycles at night
- High efficiency and energy saving: 12V DC powered motorcycle LED indicators are better than traditional lighting products in terms of energy saving, with high brightness, low heat generation, low energy consumption, high efficiency, and no filament structure
- Convenient to install: motorbike LED indicator blinker amber lamp is simple and easy to install, and can be directly fixed with bolts for regular installation; It only takes a few minutes to complete the installation, allowing your motorcycle to emit bright lights in the dark
- Good compatibility: the motorcycle indicators flowing turn signal lights are compatible with a variety of 12 V locomotives, straddle locomotives, motorcycles, electric vehicles, ATVs, off-road motorcycles, cars, etc., practical enough to meet you a plenty of using needs
Last update on 2024-04-16 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-180
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Navistar, Inc. MAR 07, 2024 NHTSA Recall No. : 24V-180 Manufacturer Recall No. : 24506 Manufacturer Information :
Manufacturer Name : Navistar, Inc.
Address : 2701 Navistar Drive
Lisle IL 60532 Company phone : 331-332-1590
Population :
Number of potentially involved : 38 Estimated percentage with defect : 20 %
Vehicle Information :
Vehicle 1 : 2025-2025 International LT
Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : • The suspect population is identified by models equipped with feature code 08TVB (Stop, Turn, Tail & B/U Lights top LED).
• The inclusive dates of manufacture were determined by the date vehicles were assembled with reversed turn signal circuits in the rear taillamp jumper harness and when Navistar contained the issue in manufacturing.
• The vehicles in the suspect population were built with rear taillamp assembly jumper harnesses with reversed turn signal circuits and all other similar vehicles were not.
There are 38 LT series trucks in the suspect population Production Dates : JAN 03, 2024 – JAN 23, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 24V-180 Page 2 Description of Defect :
Description of the Defect : • When the turn signals are activated in either direction, the front and side turn signal lamps flash correctly but the rear turn signal lamps flash in the opposite direction.
• The rear turn signals do not conform to:
o FMVSS S108 S4 Definitions, “Turn Signal Lamps” are a signaling element of a turn signal system which indicates the intention to turn or change direction by giving a flashing light on the side toward which the turn will be made.
o FMVSS 108 S7.1.2.5 – Rear Turn Signal Lamp Activation Table 1-a, Device Activation, “…Flash when the turn signal flasher is actuated by the turn signal operating unit.” FMVSS 1 : 108 – Lamps, reflective devices, and assoc. Equipment FMVSS 2 : NR
Description of the Safety Risk : Turn signals that do not conform to all the requirements of FMVSS 108 may not alert other motorists of the direction of the intended turn or change of direction which can increase the risk of a vehicle crash that may result in property damage or injury.
Description of the Cause : Two wires were reversed in the jumper harness connector of P/N 6726984C92, rear taillight jumper harness, manufactured on 12/20/2023. Identification of Any Warning
that can Occur : A pre-trip inspection performed by the vehicle operator will identify the noncompliance. Involved Components : Component Name 1 : Jumper Harness
Component Description : Harness, Jumper, taillights, W/license plate, W/ back-up Component Part Number : 6726984C92 Supplier Identification : Component Manufacturer
Name : Leoni Wiring Systems de Durango S.A. de Address : Antiguo Camino de Durango #201, Col. 20
Durango Foreign States 34237
Country : Mexico The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-180
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Chronology :
• 01/30/2024 – During a pre-delivery inspection, Navistar Manufacturing sends communication to Navistar Quality that a vehicle was found with the rear turn signals flashing in the opposite direction due to two wires reversed in the tail lamp jumper harness.
• 01/31/2024 – Navistar issues a ship hold at the assembly plant and initiates inspections of quarantined vehicles.
• 02/02/2024 – Navistar meets with the supplier to discuss the issue and to review the supplier’s processes and opens investigation to determine if there are any vehicles impacted in the field.
• 02/05/2024 through 02/23/2024 – Navistar Manufacturing inspects 179 units and repairs five. A customer/dealer inspection was inconclusive as to the presence of the issue in units that made it out of Navistar control.
• 02/26/2024 – Navistar Quality, Manufacturing, and Product Safety meet to review the vehicle inspection/failure data and determine that vehicles with suspect jumper harnesses were assembled at the supplier on the second shift of 12/20/2024.
• 02/28/2024 – Navistar Product Safety finalizes the suspect population.
• 02/29/2024 – Navistar declares a Non Compliance Recall.
Description of Remedy :
Description of Remedy Program : • The remedy will involve replacing the taillight jumper harness on
any truck found with the rear turn signals flashing in the opposite direction.
• Navistar’s plan for reimbursement of pre-notification remedies, on file with NHTSA and dated 05/06/2022, applies and reimbursement instructions will be included in the customer notification. How Remedy Component Differs from Recalled Component : Identify How/When Recall Condition was Corrected in Production : The remedy taillight jumper harness was assembled with the rear turn signal circuits in their correct connector cavities and the recalled taillight jumper harness was assembled with the rear turn signal circuits reversed in the connector cavities.
01/31/2024 – Navistar begins use of correctly wired taillight jumper harnesses in Manufacturing. Recall Schedule :
Description of Recall Schedule : It is estimated that the Customer and Dealer notification letters will be
mailed by 05/06/2024.
Planned Dealer Notification Date : MAY 06, 2024 – MAY 06, 2024
Planned Owner Notification Date : MAY 06, 2024 – MAY 06, 2024
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END