“This site contains affiliate links for which OEMDTC may be compensated” |
February 21, 2024 NHTSA CAMPAIGN NUMBER: 24V126000
Overloaded Electrical System May Cause Fire
Overloaded electrical circuits can overheat, increasing the risk of fire.
NHTSA Campaign Number: 24V126
Manufacturer Spencer Manufacturing, Inc.
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 8
Summary
Spencer Manufacturing, Inc. (Spencer) is recalling certain 2020 pumper fire trucks equipped with Weldon 8X16 Input-Output nodes. In the event of a short circuit or wiring failure, the firmware in the node may fail to shut off the output pin, resulting in overloaded electrical circuits.
Remedy
Weldon will update the firmware, free of charge. Owner notification letters were mailed January 24, 2024. Owners may contact Akron Brass customer service at 1-800-228-1161 or Spencer customer service at 1-269-637-8721.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
TECHNICAL SERVICE BULLETIN 23-001E
V‐MUX 8 x 16 Input / Output Node
January 5, 2024
IMPORTANT SAFETY RECALL INFORMATION NHTSA RECALL 23E‐084
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Weldon, a division of Akron Brass Company, has decided a safety related defect exists in certain V‐MUX 8 x 16 I/O Nodes, Weldon Part Number 6030‐2000‐00.
In the affected products, short circuit protection may not function properly. In the case of a short circuit in the wiring or the connected load, overheating of the wiring or the connected device may occur, and depending on how the product is installed in the vehicle, this could increase the risk of a vehicle fire.
You are receiving this notice because your vehicle manufacturer records indicate you have received a vehicle that contains an affected unit or units. Vehicles equipped with these devices need a firmware update.
All the affected nodes installed in your vehicle can be updated with one connection to the V‐MUX network, without accessing the individual nodes. The design files and functionality are not affected. A Weldon service app and the downloader kit is utilized to make the firmware update. This update is estimated to take 5 minutes and can be completed when the vehicle is in PM without other changes.
Weldon will provide the update application to fleet owners and authorized service centers to install the firmware update along with instructions.
Please contact Weldon Customer Service fsg‐rma@idexcorp.com and reference this recall number and provide your agency name and mailing address to obtain the remedy at no cost to you.
Please note that it is a violation of Federal Law to deliver a new motor vehicle or any item of motor vehicle equipment which is subject to a recall until the remedy has been performed.
If you believe there is a failure to remedy this defect without charge to the end user/owner of the vehicle and within a reasonable period of time, you may submit a written complaint to the Administrator, NHTSA, 1200 New Jersey Ave, SE, Washington, DC 20590, or call the Vehicle Safety Hotline 1‐888‐327‐4336 (TTY: 1‐800‐424‐9153) or go to http://www.safercar.gov.
Thanks for your prompt attention to this matter and continued support of Weldon.
Customer Care PH. 800.228.1161
Chronology :
This was not provided to us by Weldon.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
SPENCER | PUMPER | 2020 |
3 Associated Documents
Defect Notice 573 Report
RCLRPT-24V126-9666.PDF 237.161KB
Recall Acknowledgement
RCAK-24V126-4714.pdf 645.516KB
Owner Notification Letter(Part 577)
RCONL-24V126-7805.pdf 122.27KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=24V126&docType=RCL
- Efficient setting key: the multifunctional battery capacity indicator has a new design of the front setting button, and have several functions: cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- Humanized designs: the battery capacity voltage indicators are designed with switched function button, you can press to check the battery capacity or real-time voltage and turn off, with alarm design, the battery meter display will flash when the battery capacity is low
- Fit different battery: the battery gauge indicators are compatible with 12V/ 24V/ 36V/ 48V/ 60V/ 72V/ 84V acid battery, ternary lithium battery, polymer lithium-ion battery, 3 -15 series lithium ion battery, storage battery, water battery and more
- LCD display: the battery capacity gauge indicators come with PVC waterproof screen protector with bright back-light, which makes you can read the results on the clear LCG display from different angles, low working power consumption and the max is 5 mA
- Suitable for: the battery meters with alarms can be applied to different machines and places such as garden, home, office and more, can serve you for a long time, meeting your different needs and practical battery indicators will give you nice experience
- Fits for DC 12V/24V cars, test range: DC 7V-35V; Each voltage meter has passed QC test prior to shipping
- Made of high quality PC material, durable and waterproof, works well in wet enviroment
- EASY TO READ: Bright and clear led digital display, reads fine on any light condition
- EASY TO INSTALL: Comes with mounting plates, tightening rings, spade connectors and screws for easy installation and wiring
- Measurement Accuracy: 0.1V-0.2V, perfect for car/motorcycle/RV/truck/boat/ATV/UTV etc.
- 【Meet Different Needs】 The 12V round voltmeter comes with a panel and a nylon nut, which can be mounted separately on the 29mm diameter mounting hole or fixed on the matching panel, so that it could meet your different mounting needs.
- 【Blue LED Display】 This 12V battery meter with blue LED light, can be widely used under DC 12V 24V. With the digital voltage meter, you can easily monitor the voltage status of your car battery in real times, especially in dark environments.
- 【Waterproof & Useful】 The marine voltmeter gauge is waterproof design, so this LED voltmeter is safe to use even in moist environments. And also the mini voltmeter is fit for 12V 24V cars, automotive, motorcycles, RVs, SUV, Off-road, ATV, boats, marine, ships, trucks, tractor, etc.
- 【Measuring Range】 The rating of this battery voltage monitor is DC 8-48V, and its accuracy is 0.1V. With the precise 3-digit LED digital voltmeter, you can better monitor of the car's battery voltage status, helping to extend battery life.
- 【Easy installation】 This 12 volt battery monitor comes with a set of wires, two mounting screws, a matching panel and a nylon nut, making it easy to install and use.
- HIGH PERFORMANCE DUAL USB CHARGING PORTS - 24W / 4.8A USB Car Charger charges your favorite mobile devices Compatible for iPad (max speed), iPhone XS, XR, 8 Plus (max speed), HTC, Galaxy, MP3 Players, Digital Cameras, PDAs, Mobile Phones.
- REAL-TIME MONITORING - Concise LED screen displays vehicle’s operating voltage (12V/24V) or the total USB charging output (5V/4.8A Max) in real time, fully controlling the whole charging process. The LEDs are bright enough to read the display without being a distraction while driving.
- SAFE ON THE GO - Intelligent circuit design protects against short circuiting, over-heating, over-currents, and over-charging. Charging stops when battery is full.
- COMPACT DESIGN - One of the industry's smallest USB car chargers for added portability, featuring two USB ports and an LED Display make it easy to access after dark. Input: 12-24V; Output: DC 5V 4.8A or 24W (Shared by two ports). One Year Warranty.
- 12 MONTHS WARRANTY - Comes with 30 days Money Back Guarantee and 12-Months Hassle-free Replacement Warranty.
- APPLICABLE BATTERY --- DROK digital battery monitor is suitable for 10-100V (12v 24v 36v 48v 60v 72v 96v) lithium battery, lead-acid battery, lithium iron phosphate battery, Ni MH battery. Default 12 volt lead acid battery.
- APPLICATION --- this multimeter can be used as battery voltage meter, battery capacity tester and temperature indicator panel for car, marine, RV, boat, etc.
- PROTECTION --- the battery power detector comes with protective shell, dustproof waterproof surface; input reverse connection protection.
- LCD DISPLAY --- the battery status reader adopts clear LCD color screen, displays battery capacity, voltage, temperature value(switched by the key).
- ALARM --- if low voltage, red indicator flashes and buzzer alarms.
- 【1% Accuracy Measurement】Shunt-type monitor design provides much more accurate real-time voltage and current draw measurement.
- 【Protect the batteries】With High and low capacity alarm functions, our battery monitor with shunt will alarm, and backlight and voltage value will flash simultaneously to protect the batteries from getting over-discharged.
- 【Fit for all battery】The batter tester is compatible with various battery types, including Lead Acid (AGM, GEL), Lithium Iron Phosphate, Lithium-ion, Nickel-metal hybrid. compatible with batteries operating at 12 volts, 24 volts, and 48 volts.
- 【Easy To read】Displays multiple electronic parameters, including Voltage, Current, Consumed Power, Battery Capacity, and battery degradation rate with a customized brightness high-definition Backlight Display.
- 【Easy to Install】Transparent shunt holder makes the battery tester easier to mount the shunt. And the 20ft Shielded cable allows you to monitor the battery status from a distance.
- Universal battery capacity indicator voltage meter - wide voltage input range DC 12V-84V Lead-acid Batteries and 3S-26S Lithium Batteries: Ternary lithium batteries, polymer batteries, lithium-ion batteries, storage batteries.
- Multifunctional Battery Capacity voltage meter Indicator - Battery tester Right Switch key can switch voltmeter, battery percentage, switch off. Left setting key have several functions: Cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- High Quality of battery voltage meter - Large LCD screen display with green backlit and low power consumption.Two display modes can be available: battery symbol and battery percentage, battery symbol and voltmeter.
- Safety to Use - The battery voltage meter Built-in 30cm power cable, simple to connect. Reverse protection design, won't burn if connect reversely.
- Portable and Waterproof voltage meter- Small size, light weight, equipped with a PVC film, the surface is waterproof.
- Dual-display: it can display auto battery voltage and temperature inside the car simultaneously(this is for Fahrenheit)
- External temp sensor: its external temp sensor allows you to bend sensor to avoid possible heating/ direct sunshine so that you can acquire more accurate results
- Safe usage: the monitor has built-in fuse, making safe usage possible and causing no damage to your car
- Easy reading: it screen is made of LED material, hence it is easy and convenient for you to read even in dim light
- Switch Control:The voltage gauge waterproof a more accurate battery voltage. You can toggle between voltage and battery percentage or turn it off to reduce battery drain while in storage.
- oltage Gauge: Support 5-48V Input Voltage. Power display range 0-100%. Precise 3-bit LED digital display.
- Check States: Battery Capacity Voltage Monitor Gauge Indicator better helps you to early notice your car voltage condition.
- Widely Use: Fit for 5-58V Cars, Motorcycles, RV, SUV, Off-road, ATV, Boat, Marine, Ship, Truck, Tractor etc.Mini size and easy to install.
- Package Includes: 1 x Car Voltmeter Gauge; 2 x Insulated Terminals; 2 x Screws, 2 x Wires.
- Efficient setting key: the multifunctional battery indicator has a new design of the front setting button, and have several functions: cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- Practical designs: the battery capacity voltage indicators are designed with switched function button, you can press to check the battery capacity or real-time voltage and turn off, with alarm design, the battery meter display will flash when the battery capacity is low
- Fit Different Battery: the battery gauge indicators are compatible with 12V/ 24V/ 36V/ 48V/ 60V/ 72V/ 84V acid battery, ternary lithium battery, polymer lithium ion battery, 3 -15 series lithium ion battery, storage battery, water battery and more, note: if your meter always shows, it means that you have the wrong battery code and need to double-check and the correct code
- Fit different battery: the battery gauge indicators are compatible with 12V/ 24V/ 36V/ 48V/ 60V/ 72V/ 84V acid battery, ternary lithium battery, polymer lithium-ion battery, 3 -15 series lithium ion battery, storage battery, water battery and more
- Where to use: the battery meters with alarms can be applied to different machines and places such as garden, home, office and more, can serve you for a long time, meeting your different needs and practical battery indicators will give you nice experience
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-126
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Spencer Manufacturing, Inc. FEB 21, 2024 NHTSA Recall No. : 24V-126 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Spencer Manufacturing, Inc.
Address : 165 Veterans Blvd
South Haven MI 49090 Company phone : 269-637-8721
Population :
Number of potentially involved : 8
Estimated percentage with defect : 100 %
Vehicle Information : Vehicle 1 : 2020-2020 Spencer Pumper
Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Weldon notified Spencer of the recall on 11/27/23, however, the correct person was not notified. It was not until NHTSA reached out regarding this recall that we began to dive into this. Unfortunately, we had some issues getting logged into our account due to an issue with login.gov. This has now been resolved and we are filing our recall information. There were a total of eight vehicles that were affected by this recall. Seven out of the eight were to one customer so it made the notification process fairly easy. Weldon notified all of our affected customers with owner’s letters on 1/24/24. We have not received any complaints or warranty claims from our customers.
Production Dates : DEC 19, 2019 – NOV 30, 2020
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Describe the defect or noncompliance:
The short circuit protection may not function properly. In the case of a short circuit in the wiring or the connected load, overheating of the wiring or the load may occur, and depending on how the product is installed in the vehicle.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : This could increase the risk of a vehicle fire.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR Part 573 Safety Recall Report 24V-126 Page 2 Involved Components : Component Name 1 : V-MUX 8 x 16 Input / Output Node Component Description : Node
Component Part Number : 6030-2000-00 Supplier Identification : Component Manufacturer
Name : Weldon
Address : 607 NW 27th Avenue
Ocala Florida 34475 Country : United States Chronology :
This was not provided to us by Weldon. Description of Remedy :
Description of Remedy Program : All the affected nodes installed can be updated with one connection to the
V-MUX network, without accessing the individual nodes. The design files and functionality are not affected. A Weldon service app and the downloader kit is utilized to make the firmware update. This update is estimated to take 5 minutes and can be completed when the vehicle is in PM without other changes. Weldon will provide the update application to fleet owners and authorized service centers to install the firmware update along with instructions. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : An update to the firmware eliminates the defect. Once the defect was discovered, Weldon addressed the issue in production. Recall Schedule : Description of Recall Schedule : All affected customers have already been notified. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-126
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573 Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END