| “This site contains affiliate links for which OEMDTC may be compensated” |
February 1, 2024 NHTSA CAMPAIGN NUMBER: 24V061000
Incorrect Weld May Cause Seat Failure/FMVSS 207
A loose or detached seat assembly increases the risk of injury.
NHTSA Campaign Number: 24V061
Manufacturer Jayco, Inc.
Components SEATS
Potential Number of Units Affected 148
Summary
Jayco, Inc. (Jayco) is recalling certain 2020-2023 Entegra Anthem, Aspire, Cornerstone, and Reatta XL motorhomes. The pedestal mounting plate on the driver’s seat may be improperly welded, causing the plate to separate and the seat assembly to loosen or detach. As such, these seat assemblies fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, “Seating Systems” and number 210, “Seat belt assembly anchorages.”
Remedy
Dealers will inspect for a missing weld and replace the pedestal as necessary, free of charge. Owner notification letters are expected to be mailed March 1, 2024. Owners may contact Jayco customer service at 1-800-283-8267. Jayco’s number for this recall is 9903602.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
On January 11, 2024, Villa International sent an email to notify Jayco Compliance regarding their NHTSA recall number 24E-002 and advised that they are recalling certain seat pedestals, with part number 400029. The pedestal mounting plate may be improperly welded, which can cause the plate to separate and the seat assembly to loosen or detach. As such, these seat assemblies fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, “Seating Systems,” and number 210, “Seat belt assembly anchorages.” A loose or detached seat assembly increases the risk of injury. The Villa seats affected were fabricated and delivered to Jayco from 12. 27.21 through 3.27.22. These seats were installed into Jayco Entegra, Anthem, Aspire, Cornerstone, Reatta XL vehicles.
On January 15, 2024 the Warranty Incident Review Committee (WIRC) discussed the incident and determined it should be elevated to CPAC.
On January 17, 2024 the Corrective and Preventive Action Committee (CPAC) met to discuss this incident and elevated it to the Safety Steering Committee.
On January 25, 2024 the Safety Steering Committee voted in favor of proceeding with a noncompliance recall for failing to comply with (FMVSS) number 207, “Seating Systems,” and number 210, “Seat belt assembly anchorages.”
24E002 – Incorrect Weld May Cause Seat Failure – Villa International Seat Pedestal
24E002 – Incorrect Weld May Cause Seat Failure – Villa International Seat Pedestal
16 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| ENTEGRA | ANTHEM | 2020-2023 |
| ENTEGRA | ASPIRE | 2020-2023 |
| ENTEGRA | CORNERSTONE | 2020-2023 |
| ENTEGRA | REATTA XL | 2020-2023 |
2 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-24V061-1659.PDF 215.641KB
Recall Acknowledgement
RCAK-24V061-1560.pdf 645.454KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=24V061&docType=RCL
- 【Height-adjustable】This fixed, non-rotatable boat seat pedestal is also height-adjustable, ranging from 11 ½ inches to 17 ½ inches. Combine it with other flat boat seat swivels for a perfect fit and customization according to your preferences.
- 【Exceptional durability】Designed with reinforced welded joints, this boat seat pedestal ensures exceptional durability and reliability. Its black powder-coat finish adds extra protection against the harsh marine environment.
- 【Ergonomic design】Featuring heavy-duty 2-7/8" posts and 9" dia., this boat seat pedestal offers an ergonomic experience. The positive-locking handles are crafted with stainless steel components for added strength and convenience
- 【Safe and secure】Engineered for strength and safety, the machined bases of this boat seat pedestal provide reliable support even in harsh offshore conditions.
- 【Compatible with boat seat swivels】This boat seat pedestal can be easily paired with boat seat swivels, giving you the freedom to choose and combine according to your specific needs.
- Zinc-plated steel construction
- ABYC Code: B
- Installed Height: 1"
- 2-3/4" steel pin
- For installing an extra seat or replacing existing pedestal
- Ease installation, table mounts
- Black powder coated finish for great looks and corrosion resistance
- Strong and durable with reinforced welded joints
- Economical and long lasting
- 11" tall, 1.5" diameter brushed aluminum boat seat extension post with a non-threaded, steel pin
- Lock'n-pin prevents unintentional detachment for seat mounts, posts and bases
- The 3/4 inch System gives you outstanding economical performance
- Great for adding seating to fishing, Pontoon or cruising boats
- Lock'n-pin products Meet ABYC standard
- Sturdy non-swivel mounting point for a boat seat
- Durable pedestal features reinforced welded joints for added strength
- Features integrated base mounting plate and seat mounting plate
- Has a black powder-coat finish that will withstand the rigors of a marine environment
- Product Dimensions: 7” H x 6.75” W x 6.75” L
- Swivl-Eze Lock’N-Pin ¾-Inch Pedestal Package includes pedestal and base plate to install a boat seat, so all you need to add is the seat of your choice and hardware (sold separately)
- Brushed Aluminum finish kit
- Includes an 11-inch-tall post topped with a black, e-coated seat mount with spring
- Non-threaded post
- 7-inch x 7-inch aluminum base plate
- ❤[Adjustable Height and Improved Comfort] Our boat seat features a height adjustment range of 14-20 inches and a 7-inch travel seat slide. With just a single lever, you can easily and quickly adjust the height of your seat, enhancing your visibility and providing optimal comfort on the water.
- ❤[Enhanced Mobility with 360° Rotation] Our seat design includes a 360° rotation feature with a locking knob. This allows you to freely rotate the seat in any direction, providing enhanced mobility and easy access to different areas of your boat.
- ❤[Durablity and Corrosion-Resistant Material] Crafted from strong and durablity anodized aluminum, our seat ensures long-lasting performance. The smooth and thick wall with a polished finish not only adds durability but also provides a corrosion-resistant feature, saving you money and the hassle of frequent replacements.
- ❤[Sturdy Base for Maximum Support] The seat is equipped with a 9-inch diameter base that includes 2-7/8-inch diameter holes. This provides a strong and sturdy base for your seat, supporting your weight and withstanding shocks from waves. By offering this stability, it protects your knees and back from potential injuries.
- ❤[Universal Compatibility and Meets Class AD Standards] Our seat is compatible with all brands of seats and meets the Class AD (Drive Grade) Standards. With a weight of just 10LB, it offers convenience without compromising on quality.
- 4" x 8" lock'n-pin 3/4" pin base is a stainless steel top plate with reinforcing steel Lip tube. It works with a non-threaded pedestal pin and features an acetal bushing for secure fit and durability
- Clear coat finish for appealing look and corrosion resistance
- Six bolt or screw attachment (hardware not included)
- 7 Level Height Adjustments:This Adjustable Height Locking Boat Seat Pedestal Adjustable from 13"-19" high and 7 lock-in positions.With slider adjustment that can be moved back and forth by 7 inches.the boat seats pedestalallows you to quickly and easily adjust the height of the seat using a lever, which can improve your visibility and comfort on the water.
- Doesn’t wobble, Rotable :After adjusting the boat seats pedestal to a suitable height, turning the large black locking knob on the adjustment lever to the right can prevent the seat from shaking at any height. In addition, this boat chair base has a 360 degree rotation of the lock knob, They enable you to rotate your seat 360
- Durable and beautiful：This Adjustable Height Locking Boat Seat Pedestal is made of Strong and durable Anodized Aluminum for durability.It will not rust when used outdoors, and the pedestal seat kit provides a silver smooth surface treatment for a more beautiful appearance.
- Compatible with all brands:this boat seats pedestal Predrilled seat fixing holes, that fits boat seats from all brands.Especially for boat chair bases with adjustable sliding plates, there are more reserved holes on the sliding plates, which have a wider range of applications.
- Size: Base: 9" OD w/ 3" diameter holes. 360° rotation with locking knob. Slide: 13" x 7" Platform ,7 inches sliding adjustments. 7 level height adjustments from 13 to 19 inches
- Sturdy, height-adjustable post accommodates reliable mounting of a seat
- Power pedestal can be adjusted to heights between 24 and 30 inches
- Dependable post has an exterior diameter of 1.77 inches
- Post attaches to a base (sold separately) using the Snap-Lock system
- Clear anodized post has integrated seat mount
Last update on 2024-04-06 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-061
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Jayco, Inc. FEB 01, 2024 NHTSA Recall No. : 24V-061 Manufacturer Recall No. : 9903602
Manufacturer Information :
Manufacturer Name : Jayco, Inc.
Address : 903 South Main Street
PO Box 460 Middlebury IN 46540 Company phone : 800-283-8267
Population :
Number of potentially involved : 148 Estimated percentage with defect : 1 %
Vehicle Information : Vehicle 1 : 2020-2023 Entegra Coach Anthem, Aspire, Cornerstone, Reatta XL Class A Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Jayco Inc. determined the population from production records.
Production Dates : NOV 21, 2019 – AUG 25, 2022
VIN Range 1 : Begin : 1JSMEACV6N14F8061 End : 1JSMEACV8P14W8050 ✔ Not sequential Description of Noncompliance : Description of the Noncompliance : According to Villa International: The pedestal can is not properly welded to the mounting plate. FMVSS 1 : 207 – Seating systems
FMVSS 2 : 210 – Seat belt assembly anchorages
Description of the Safety Risk : The can to mounting plate could separate resulting in an increased risk of a crash and injury.
Description of the Cause : The pedestal can is not properly welded to the mounting plate. Identification of Any Warning
that can Occur : The seat assembly would be loose.
Involved Components : Part 573 Safety Recall Report 24V-061 Page 2 Component Name 1 : Pedestal Component Description : Seating Pedestal Component Part Number : 400029 Supplier Identification : Component Manufacturer
Name : Villa International Address : 4733 Eastland Dr.
Elkhart Indiana 46516
Country : United States Chronology :
On January 11, 2024, Villa International sent an email to notify Jayco Compliance regarding their NHTSA recall number 24E-002 and advised that they are recalling certain seat pedestals, with part number 400029. The pedestal mounting plate may be improperly welded, which can cause the plate to separate and the seat assembly to loosen or detach. As such, these seat assemblies fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, “Seating Systems,” and number 210, “Seat belt assembly anchorages.” A loose or detached seat assembly increases the risk of injury. The Villa seats affected were fabricated and delivered to Jayco from 12. 27.21 through 3.27.22. These seats were installed into Jayco Entegra, Anthem, Aspire, Cornerstone, Reatta XL vehicles.
On January 15, 2024 the Warranty Incident Review Committee (WIRC) discussed the incident and determined it should be elevated to CPAC.
On January 17, 2024 the Corrective and Preventive Action Committee (CPAC) met to discuss this incident and elevated it to the Safety Steering Committee.
On January 25, 2024 the Safety Steering Committee voted in favor of proceeding with a noncompliance recall for failing to comply with (FMVSS) number 207, “Seating Systems,” and number 210, “Seat belt assembly anchorages.” Description of Remedy :
Description of Remedy Program : Jayco Inc. dealers will inspect for a missing weld at the can base and if the
weld is missing they will replace the pedestal, as necessary, free of charge. There are no warranty claims or complaints associated with this recall.
Jayco Inc. will be reporting the quarterly completion rates to NHTSA. How Remedy Component Differs from Recalled Component : The replacement pedestal will have the proper welds. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-061
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Identify How/When Recall Condition was Corrected in Production :
According to Villa International: Pedestals in production are inspected and documented after welded pedestal is completed, prior to being powder coated, after powder coating, and at final seat assembly. Recall Schedule :
Description of Recall Schedule : Jayco will notify its dealers and affected retail owners.
Planned Dealer Notification Date : MAR 01, 2024 – MAR 01, 2024
Planned Owner Notification Date : MAR 01, 2024 – MAR 01, 2024
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END