120-1729 – Tail Light Bezel Not Installed – 2024 Coachmen Clipper & Viking Travel Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

January 26, 2024 NHTSA CAMPAIGN NUMBER: 24V045000

Tail Light Bezel Not Installed/FMVSS 108

A missing tail light bezel may reduce visibility of the trailer, increasing the risk of a crash.

 

NHTSA Campaign Number: 24V045

Manufacturer Forest River, Inc.

Components EXTERIOR LIGHTING

Potential Number of Units Affected 18

 

Summary

Forest River, Inc. (Forest River) is recalling certain 2024 Coachmen Clipper and Viking Travel Trailers. The tail light bezel may not have been installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and Associated Equipment.”

 

Remedy

Dealers will install the tail light bezel, free of charge. Owner notification letters are expected to be mailed March 6, 2024. Owners may contact Forest River Customer Service at 1-269-467-4600. Forest River’s number for this recall is 120-1729.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


RECALL 24V045 / 2024-041 REMEDY INSTRUCTIONS

Make(s): CLIPPER & VIKING
Model(s): CWT9000ROK & VWT9000ROK
Model Year(s): 2024
Repair Code: RC-058-03-00-004485
Allotted Time: .30 HRS.
Inspection Code: N/A
Allotted Time: N/A
Concern:
The tail lamp bezel that is rated for reflectivity may not have been installed around the tail lamps as required.
Photo(s) Required: YES, POST REMEDY
Prior Authorization Required: YES
Part(s) Kit Number: F100510960
Part(s) Return: N/A

 

Turn off LP Gas at LPG Tank(s). Disconnect the vehicles’ battery Positive and Negative, disconnect any House battery(s) Positive and Negative, if equipped with a generator ensure it is off and lastly, ensure the vehicle is disconnected from shore power. Block any tires/wheels to prevent the vehicle from rolling. Failure to do so may result in electrocution, fire or other personal injury, property damage and/or death.

ORDER PARTS KIT: F100510960, REAR TAIL LAMP BEZEL WITH REFLECTIVE PROPERTIES

 

STEP 1: LOCATE THE TAIL LAMPS ON THE REAR OF THE VEHICLE;

 

STEP 2: INSTALL ONE TAIL LAMP BEZEL PER TAIL LAMP;

  • IF NEEDED, UNSCREW THE TAIL LAMP AND MOVE DOWN NOT MORE THAN 1/4″;

 

STEP 3: INSTALL TAIL LAMP BEZEL;

 

STEP 4: TAKE A PHOTO OF THE ENTIRE REAR OF THE VEHICLE WITH THE INSTALLED BEZELS;

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [109.98 KB]

 


February 2024

This Notice applies to your vehicle VIN listed above.

Dear Forest River Customer:

This notice is sent to you in accordance with the requirements of the United States’ National Traffic and Motor Vehicle Safety Act. Forest River has decided that certain 2024 Viking and Clipper Travel Trailer Recreational Vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) number 108 – Lamps, reflective devices, and assoc. Equipment.

 

WHAT IS THE NONCOMPLIANCE?

The tail lamp bezel that is rated for reflectivity was not being consistently installed on the vehicles.

 

EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.

An approaching vehicle from the rear may have reduced visibility of the suspect vehicle, which may result in a crash. Additionally, the taillamps do not meet FMVSS 108.

 

WHAT IS FOREST RIVER AND OUR DEALERSHIPS GOING TO DO?

Forest River is notifying dealerships of the recall. You may have the recall corrected at any Forest River dealership. However, it is preferable if you have your selling dealership perform the remedy. Forest River completely covers your cost for the remedy; you will not receive any bill of sale for anything covered under the above recall number.

 

WHAT SHOULD YOU DO?

Please contact your dealer immediately and request a service appointment to schedule the free remedy. The Dealership or Service Center will install the tail lamp bezel to meet FMVSS requirements. The vehicle Owner is responsible for arranging to have the work completed. Please state you have been notified by Forest River of having a recall in process for your vehicle and provide the recall number for the dealership. It is also helpful to the dealership to have a copy of this letter when you take your vehicle in for the recall remedy. You may also visit www.forestriverinc.com for dealer locations.

 

HOW LONG WILL THE REMEDY PROCESS TAKE?

The estimated time of repair is .30 hours. However, the dealership may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.

 

WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?

If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall inspected and/or performed to ensure the correct parts and procedures were utilized. Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope of this defect under recall.

Please send the service invoice to the following address:

Viking RV Centreville
Forest River, Inc.
Attn: WARRANTY MANAGER
580 West Burr Oak St.
Centreville, MI 49032

 

 


Chronology :

On January 23, 2024, during a routine Corporate Standards inspection, it was found that the tail lamp bezel that is rated for reflectivity was not being consistently installed. The same day, the manufacturing plant notified Forest River’s Office of Corporate Compliance (“OCC”) and a research item was opened.

On January 26, 2024, Forest Rivers Corporate Recall Committee voted to recall. A Stop Sale Notice will be issued immediately following the filing of this recall.

 


2 Affected Products

Vehicles

MAKE MODEL YEAR
COACHMEN CLIPPER 2024
COACHMEN VIKING 2024

 


6 Associated Documents

Noncompliance Notice 573 Report

RCLRPT-24V045-8506.PDF 214.576KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.55 KB]

 


Recall Acknowledgement

RCAK-24V045-4387.pdf 646.185KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [631.04 KB]

 


Miscellaneous Document – Stop Sale Notice – 120-1729

RMISC-24V045-4386.pdf 168.026KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [164.09 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-24V045-1960.pdf 204.459KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [199.67 KB]

 


Remedy Instructions and TSB

RCRIT-24V045-2399.pdf 112.622KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [109.98 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-24V045-5432.pdf 180.28KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [176.05 KB]

 


Latest Recalls Documents

For the Latest and Most recent Recall Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=24V045&docType=RCL

 


 

Bestseller No. 1
VINAUO LED Trailer lights, RV Tail Lights LED, RV Brake Lights, RV Tail Lights Brake Stop Turn Trailer Lights, Camper Tail Lights with Red Reflex Trailer Tail Lights
  • ENERGY EFFICIENT & Multifunction Camper Light: Low-profile RV tail light serves 4 function as stop light, turn signal light, taillight. Using advanced LED combination light with better heat distribution, brighter and more energy-efficient than halogen bulbs. This RV camper light Left hand driver's side: 29 Diodes( 24 Red++5 White ); Right Hand Passenger's Side: 24 Diodes; this light uses LEDs.
  • Durable white plastic base with acrylic RED lens, provide better light with less power output bring reliable visibility and safety even in inclement weather.
  • WATERPROOF: Waterproof rate IP67, effectively protects the rv tail light from dust, sand, moisture, rain and other impact of inclement weather. Each lens is sonically welded to the housing and built to ensure maximum durability in working conditions for your vehicles.
  • Easy Installation: Directly mounts on surface of trailer - hardware not included. RV light set come with 3 specific colored wires for easy connection. White wire: Negative(Ground). White + Black Wire: Tail Lights; White + Red Wire: Brake/Turn Signal Lights.
  • Widely Application: Ideal for most 12V vehicles including Trailers, Tractors, Semi-Trailer, Dump Truck, Pickup, Camper, UTEs, UTVs, Boat, Caravans, flatbed, special vehicle etc.
Bestseller No. 2
Partsam 2Pcs Rectangle LED Trailer Camper RV Triple Tail Lights Stop Turn Tail Backup Reverse Lights Taillights Vertical and Horizontal Mount - Red and White
  • This RV tail light serves four functions: stop light, turn signal light, and taillight, and backup light in the center, this is white LEDs. It is a really nice low profile light for the back of your trailer or RV or motor home. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on;
  • This rectangular trailer light has a surface mount installation, so it mounts directly on the surface of your trailer, of your application, screws included for mounting. With two reflector strips built in top and bottom, it can be mounted oriented horizontally or vertically, whatever suits your application. Also a mounting gasket goes in between the light and the mounting surface, which creates a tight seal and offers some cushion behind the actual light;
  • This Triple LED Trailer Light is hardwired with 6 wires: White is the ground, Blue is backup/reverse light, green and yellow is high mode for stop or turn signals, black and brown is low mode for tail or running lights;
  • Overall dimensions: Overall length is 14 inches approx., and overall width is about 6-7/8 inches, and the light is about half an inch thick, but with the little knob where the wires all come out, it's about 1 inch, so you may need to cut out a hole to allow that to go in. The spot knob is about 1 3/16 inch in diameter. Really a nice slim profile unit;
  • Package included 2pcs rectangular trailer lights (Screws included); We truly offer 1 year warranty! If have any questions or issues about our Triple LED Taillights , Please feel free to us and we will reply in 24 hours;
Bestseller No. 3
Lumitronics RV Surface Mount Light - Stop/Turn/Tail for RV, Trailer, Camper, 5th Wheel, Motorhome (White)
  • Description: Combination stop/turn/tail light with white base. 4.3 Lumens
  • Features: Snap-on, replaceable lens and easy to change bulbs
  • Durability: All weather molded plastic housing and durable lens build resists corrosion
  • Included: Ground wire included
  • Usage: These tail lights feature superior design and replacement flexibility
SaleBestseller No. 4
POVTOR RV Tail Lights, 57 LED RV Camper Trailer Tail Lights With Running/Turn Signal/Brake/Stop License Plate Light Surface Mount RV Led Tail Lights
  • 【Unique US Flag Design 】:Rv trailer lights come with four functions,which are running light/turn signal light/Brake light/license plate light.Built with US Flag design,upgraded your RV Camper or Trailer a unique and stylish look on the road.IP67 waterproof,the lens and the rear shell are tightly connected with waterproof silicone,50000 hrs life span, could work at all conditions.Upgrade cooling system,maintain 65 ℃ after lighting tested over two hours at maximum power.
  • 【High Performance LEDs】Used High intensive 57 PCS LEDs in total,each led camper tail light employs 24PCS quality red led chips,one of the led rv tail light built with license plate holder and 9PCS high brightness white leds for license plate,others only have 5PCS leds for license plate! Outputs amazing bright and stable RV Tail light. Features better visibility and safety, also add a bonus of charming light for your night trip.
  • 【EASY INSTALLATION】:The rv camper tail lights designed with 3 specific colored wires for easy connection.Black wire is negative,Red wire is brake light and turn signal light, and Yellow wire is running light.The license plate light will be also light up,when the running light is on.Come with instructions,and this rv tail lights have mounting holes,which can be installed close to surface of the trailer,usually can be installed within 20 minutes.
  • 【Widely Application】: Travel rv tail light kit fits for most 12V vehicles including Camper, Trailers, semi-trailer, Tractors, Dump trucks, Caravans, UTVs, Pickup, flatbed, UTEs, Boat, special vehicles etc.
  • 【Package Contents】: 2PCSx rv led tail lights+ 1 Set of screws+1PCS of installation instruction .With 12 month warranty and good customer service .
Bestseller No. 5
VINAUO RV Tail Lights LED, Camper Tail Lights, RV Brake Lights, RV Trailer Lights Stop Turn Tail LED, RV Tail Lights with White Base Brackets LED Trailer Lights, LED Camper Tail Lights
  • ENERGY EFFICIENT & Multifunction RV Tail Lights: Low-profile RV tail light led serves 4 function as stop light, turn signal light, taillight. Using advanced LED combination light with better heat distribution, brighter and more energy-efficient than halogen bulbs. This camper tail lights Left hand driver's side: 41 Diodes( 36 Red++5 White ); Right Hand Passenger's Side: 36 Diodes.
  • Superior Quality of RV Brake Lights: Durable white plastic base with acrylic RED lens, provide better light with less power output bring reliable visibility and safety even in inclement weather.
  • WATERPROOF: Waterproof rate IP67. LED RV Tail Lights effectively protects the rv tail lights from dust, sand, moisture, rain and other impact of inclement weather. Each lens is sonically welded to the housing and built to ensure maximum durability in working conditions for your vehicles.
  • Easy Installation Trailer Tail Lights: Directly mounts on surface of trailer - hardware not included. RV tail lights come with 3 specific colored wires for easy connection. White wire: Negative(Ground). White + Black Wire: Tail Lights; White + Red Wire: Brake/Turn Signal Lights.
  • Widely Application: LED Trailer Lights Ideal for most 12V vehicles, such as RV, Camper, Trailers, Tractors, Semi-Trailer, Dump Truck, Pickup, Camper, UTEs, UTVs, Boat, Caravans, flatbed, special vehicle etc.
SaleBestseller No. 6
Partsam 2Pcs LED Triple Tail Lights 45 LEDs, Rectangle Vertical or Horizontal Mount LED Trailer Camper RV Tail Lights Stop Turn Tail Backup Reverse Lights Taillights w/Black Base - Red/Clear Lens
  • Package includes 2 Pieces led triple horizontal mount taillights FULL LEDs featuring a black base with 8 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light;
  • These Triple Vertical Taillights include 3 red lenses: 2Pcs replaceable red led stop, tail, and turn lights, 1Pc clear backup light with red reflex lens border and White Leds(Built-in reflex reflector removes the need for a separate reflector); This Led triple tail light assemblies can be mounted oriented horizontally, vertically, surface/flat mount, whatever suits your application;
  • This LED Triple Tail Light is hardwired with 8 wires: White is the ground, Blue is backup/reverse light, red is high mode for stop or turn signals, black is low mode for tail or running lights; NOTE: If upgrading form halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal;
  • Overall dimensions: Overall length is 14.17 inches approx., and overall width is about 7 inches, and the tail light is about 0.87 inch thick, requiring 13.4 inches long x 6.3 inches hole to hole cutout for complete installation. Really a nice slim profile unit;
  • Warranty: We truly offer 1 year warranty for these rear tail light combos! If you have any questions or issues about our Triple LED Taillights, Please feel free to us and we will reply in 24 hours;
SaleBestseller No. 7
Partsam Rectangular Red LED RV Camper Trailer Stop Turn Brake Tail Lights White License Plate Light 49 LED with License Bracket Holder and White Base 12V Sealed w Reflex Surface Mount (Left + Right)
  • 8-5/8" x 3-7/8" Rectangle Trailer Tail light Kit serves 3 functions: stop light, turn signal light, taillight. Perfect for surface mount on CAMPER TRAILER. At the bottom of the left hand driver's side, you can see a license plate light and license plate mounting brackets built in. Red lens. White plastic base.
  • left hand driver's side: 27 Diodes( 22 Red++5 White ); Right Hand Passenger's Side: 22 Diodes; this light uses LEDs, which make great replacements for incandescent lights. They last about 50 times longer. They are more efficient, provide better light with less power output, and of course there's not bulbs to replace, or not brittle filaments.
  • It is designed to mount on the surface of a trailer and Camper etc.; there's three wires to connect. White is your ground wire, black is your taillight, and then the red is the brake and turn signal. This light is SAE and DOT approved.
  • Dimension: overall length: 8 5/8", The height: 3 7/8" and the total depth is 1 3/5"; Mounting Holes are Approx. 7" by 2 1/2" Apart.
  • Easy Installation: This light is Surface mount, which means that it installs flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
Bestseller No. 8
Lumitronics Red Surface Mount Stop/Turn/Tail - License Bracket/Light for RV, Trailer, Camper, 5th Wheel and Motorhomes (White)
  • Description: Combination stop/turn/tail light with backup light. White base
  • Deisgn: These tail lights feature superior design and replacement flexibility
  • Durability: Made using automotive corrosion resistant bulb sockets and 16 gauge supply and ground wiring
  • Features: Snap-on replaceable lens and bulbs. Up to 106.4 Lumens.
  • Quality: All-weather molded plastic housing and durable build protects against corrosion
Bestseller No. 9
HOYUZA RV Tail Lights, RV Camper Lights Red Brake Turn Light White License Plate Light with Reflex Surface Mount Black Base Red Cover
  • 【Multi-Function】: The RV tail lights LED with tail light, turn signal light and brake light 3 functions, and when the tail light is on, the license plate light will also be on. Rv trailer lights using advanced LED combination lights, The lens has good light transmittance, brighter and energy-saving.
  • 【Applicable Models】: This camper tail lights are suitable for most 12V vehicles including Camper, Trailers, semi-trailer, Tractors, Dump trucks, Caravans, UTVs, Pickup, flatbed, UTEs, Boat, special vehicles etc. Some RV original tail lights may not match the size of ours, so please check your size before purchasing.
  • 【Good Material】:The shell of the rv brake lights are made of plastic, the lens and the rear shell are tightly connected with waterproof silicone, which can effectively waterproof, dust-proof, and anti-corrosion, which greatly extends the service life, and can work safely even in bad weather.
  • 【Easy Installation】: There are three different color wires on the back of this rv led tail lights. The white wire is ground, the red wire is brake light, and the black wire is running light, which is convenient to connect. This trailer tail lights have mounting holes, which can be installed close to the surface of the trailer, which greatly saves your precious time.
  • 【Package Contents】: 1 x Left side led camper tail light + 1 x Right side led camper tail light + a pack of screws. One year warranty, please rest assured to buy, if you have any product-related problems, please contact us to provide you with a satisfactory solution.
Bestseller No. 10
Partsam 2x Double RV Trailer Camper Tail Lights 24-2835 LED Horizontal Vertical Surface Mount Double Trailer Light Taillight Red Lens Red Light Black Base 12V IP67 Waterproof
  • PACKAGE INCLUDED: 2pcs led double horizontal mount taillights FULL LEDs featuring a black base with 6 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light.
  • These double Vertical Taillights include 2 red lenses: replaceable red led stop, tail, and turn lights with red reflex lens (Built-in reflex reflector removes the need for a separate reflector). It can be mounted oriented horizontally or vertically, whatever suits your application.
  • This LED Triple Tail Light is hardwired with 6 wires: White is the ground, red is high brightness for stop or turn signals, black is low brightness for tail or running lights.
  • NOTE: If upgrading form halogen bulbs to led, you may need resistors to splice in or you may have hyper flash on your turn signal.
  • SIZE: L 9.25" x W 6.3" x H 0.6"; Voltage: 12V; Wire Length: 10"; IP67 Waterproof.

Last update on 2024-04-17 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...