Incorrect VIN on Certification Label – 2023 Great Dane Champion Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

December 15, 2023 NHTSA CAMPAIGN NUMBER: 23V852000

Incorrect VIN on Certification Label/Part 567

An owner that references an incorrect VIN label may not recognize their trailer is involved in a safety recall, and may not have the recall remedy performed, which could increase the risk of injury, fire, or a crash.

 

NHTSA Campaign Number: 23V852

Manufacturer Great Dane Trailers

Components EQUIPMENT

Potential Number of Units Affected 25

 

Summary

Great Dane Trailers, (Great Dane) is recalling certain 2023 Champion trailers. The VINs on the certification label may be incorrect. As such, these trailers fail to comply with the requirements of 49 CFR Part 567, “Certification.”

 

Remedy

Great Dane has mailed new certification decals, free of charge. Owner notification letters are expected to be mailed February 13, 2024. Owners may contact Great Dane customer service at 1-877-369-3493.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

02/10/2022 Trailer order was taken

06/02/2022 The order was revised to change the overall length from 53′ to 48′

08/19/2022 First trailer completed

12/05/2023 Data audit found that the VINs were never reconfigured after the length change

12/05/2023 Investigation begun.

12/05/2023 Investigation discovered that manufacturing shipped replacement certification decals after delivering completed trailers.

12/05/2023 Salesman confirmed that the customer received the updated certification decals.

12/11/2023 It was determined that even though this issue has already been corrected in the field that this constitutes a noncompliance with FMVSS 567

 


1 Affected Product

Vehicle

MAKE MODEL YEAR
GREAT DANE CHAMPION 2023

 


4 Associated Documents

Recall Acknowledgement

RCAK-23V852-3538.pdf 691.813KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [675.60 KB]

 


Recall 573 Report

RCLRPT-23V852-4992.PDF 360.445KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [352.00 KB]

 


Recall 573 Report – 12/20/2023

RCLRPT-23V852-3093.PDF 217.782KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [212.68 KB]

 


Recall 573 Report – 12/29/2023

RCLRPT-23V852-2579.PDF 217.807KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [212.70 KB]

 


Latest Recalls Documents

For the Latest and Most recent Recall Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V852&docType=RCL

 


 

SaleBestseller No. 1
Valvoline High Performance SAE 80W-90 Gear Oil 1 QT
  • Protects Against Severe Temperatures To Help Extend Service Life
  • Formulated With Extreme-Pressure Additives To Minimize Gear Wear From Shock Loads
  • Helps Protect Against Gear Wear From Scuffing, Scouring, Corrosion And Pitting
  • Recommended For Conventional Hypoid Differentials And Non-Synchronized Manual Transmissions In Passenger Cars, Light Trucks, Sport Utility Vehicles, Vans And Heavy-Duty Trucks Where An Api-Gl5 Or Gl-4 Fluid Is Specified
Bestseller No. 2
Lucas Oil 10043 SAE 80W-90 Heavy Duty Gear Oil - 1 Quart
  • Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
  • Helps to control heat
  • Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
  • Available in 1 quart and 1 gallon bottle sizes
Bestseller No. 3
Bestseller No. 4
Bestseller No. 5
Triax Gear Premium LS 80W-90, GL-5 Limited Slip Ready, Manual Transmissions, Hypoid Gear Systems, Differentials, NATO Military Approved, Widest OEM Specification Range (1 Gallon)
  • WIDEST SPEC RANGE ON THE MARKET: widely compatible with a very large number of hypoid gear systems, differentials, transmissions and axle assemblies.
  • SEVERE SERVICE MAX: Exceptional shear stability and oxidation resistance. Polyphosphate EP proprietary additive system offers substantial improvement in performance over previous generation, low cost, gear oils
  • BUILT IN LIMTED SLIP ADDITIVE - Does not require "additional" LS additive. Its built into the product, optimized for all limited slip differentials, including those with built in wet brakes.
  • OUTSTANDING SCUFFING PROTECTION - Superb gear and syncron protection, facilitating extremely long transmission life. Exceeds Load Stage 13 extreme pressure requirements beyond 120,000 lbs / sqi.
  • SHEAR STABLE - Excellent thermal stability and high load capacity without viscosity breakdown, facilitates excellent film strength under high loads, high temp and high shear conditions.
Bestseller No. 6
Ultra1Plus SAE 80W-90 Conventional Gear Oil API GL-5 (US Gallon - 4 QTS)
  • ✅ Extended gear and bearing life due minimal deposits.
  • ✅ Exceptional thermal stability and resistance to high temperature oxidation.
  • ✅ Longer seal life.
  • ✅ Reduced maintenance cost and longer equipment life.
  • ✅ Effective low temperature lubrication.
SaleBestseller No. 7
Genuine Ford Fluid XY-80W90-QL SAE 80W-90 Premium Rear Axle Lubricant - 1 Quart
  • Meets warranty requirements and is recommended for conventional and limited-slip differentials of passenger cars, light trucks, vans and buses
  • Formulated for automotive use
  • Use according to owner guide recommendations
  • Recommended by Ford Motor Company
  • Motorcraft SAE 80W-90 Premium Rear Axle Lubricant is an excellent multi-purpose extreme pressure lubricant
Bestseller No. 8
Valvoline Gear Oil, Differential, 80W90, Conventional, 1 qt Bottle, Each
  • Product Type :Auto Accessory
  • Package Dimensions :8.89 Cm L X10.922 Cm W X30.48 Cm H
  • Country Of Origin :United States
  • Package Weight :2.0Lbs
Bestseller No. 9
Premium Gear Oil 80w90
  • Formulated specifically for use in motorcycles and ATVs
  • Superior protection from wear, pitting and spalling
  • Shear stable formula maintains viscosity and ensures smooth shifting
  • Surface-active chemistry keeps surfaces free of corrosion, deposits and wear
  • Exceeds API GL-5 specifications
Bestseller No. 10
Quicksilver by Mercury Marine 80W-90 Premium Gear Lube, Marine Engine, 32 oz.
  • Direct replacement for Mercury Marine 858058K01
  • Provides maximum protection against excessive wear, corrosion and pitting for extended gear life in marine applications
  • Contains additives to protect gears if water enters the gear case or lower unit
  • Recommended for use in outboard motor gear cases and marine lower units in applications below 75hp
  • 80W-90 viscosity

Last update on 2024-06-10 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...