“This site contains affiliate links for which OEMDTC may be compensated” |
November 20, 2023 NHTSA CAMPAIGN NUMBER: 23E089000
Drawer System Brackets Not Secured Properly
Unexpected sliding or detachment of the CargoGlide unit can increase the risk of injury.
NHTSA Campaign Number: 23E089
Manufacturer DECKED
Components EQUIPMENT
Potential Number of Units Affected 200
Summary
DECKED is recalling certain CargoGlide Drawer System Brackets, part number A0100-XCGB-BLK. The brackets may have been produced with holes that are too large, which can cause the studs to fail and the CargoGlide unit to extend beyond the tailgate and detach.
Remedy
Owners are advised to remove the brackets and CargoGlide unit off of their truck drawer system until they install the new brackets. DECKED will replace the brackets, free of charge. Owner notification letters are expected to be mailed in November 2023. Owners may contact DECKED customer service at 1-208-806-0251.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
On Friday 11/10/23, DECKED received notice from a customer attempting to use these brackets for installation that the studs in the brackets were spinning when they attempted to tighten down a locking nut in order to mount the CargoGlide unit. DECKED engineering department immediately began testing and was able to identify the issue with sample parts.
Further inspection showed the that brackets provided for production builds had holes that were approximately 0.005″ out-of-spec vs. provided drawings which put them out of tolerance for the studs being used in the application.
Further testing was conducted to measure pull strength of the studs on Monday, 11/13/23 after which it was determined that a full product recall was required.
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
DECKED | CARGOGLIDE BRACKETS |
2 Associated Documents
Recall Acknowledgement
RCAK-23E089-9452.pdf 646.605KB
Defect Notice 573 Report
RCLRPT-23E089-2714.PDF 216.962KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23E089&docType=RCL
- SUPPORT DRAWER GLIDES – These rear drawer track back plates are used to support side mounted drawer glides.
- DIMENSIONS - 5/16 inch wide x 7/8 inch tall x 3 inch deep openings. The 2-7/8 inch socket depth allows for front to back adjustment of the drawer slides.
- EASY INSTALLATION – Installation is quick and easy, and all fasteners are included.
- DURABLE – Constructed of a thick, durable white plastic, these rear drawer track brackets are designed to last.
- MAXIMUM LOAD RATING – The maximum safe load rating is 75 lbs. per pair.
- 【Package Contain】 16 pcs corner braces and 64 pcs flat head screws. Each brace bracket size: 40*40*16mm/ 1.57*1.57*0.63in, thickness: 2mm/ 0.08in, the hole diameter: 5mm/ 0.2in. The screw length: 16mm/ 0.63in, screw head diameter: 7mm/ 0.27in.
- 【Premium Material】 Blingstar corner fasteners adopt high quality stainless steel which are anti-rusting and sturdy for serving longer. The black coated surface and round edge are smooth without burrs, no worry about scratching your hands or furniture. The screws are made of high hardness coated iron material that are difficult to be broken.
- 【Brace & Reinforce】 Small L-shape brackets are designed to prevent the corner joint from collapsing under structural loads or from impact or force. These right angle brackets are important fastener to join two wood furniture parts together.
- 【Easy to Install】 The attached self tapping screws have deep thread that offer firm fastening force and great grips in wood materials. It's easy for you to install L bracket in wood material. Counterbore designed mounting holes ensure the screws not protruding.
- 【Widely Applications】 90 Degree metal brackets are not only suitable to build wood frame, but also ideal to fasten and reinforce wooden bed, cabinet, dresser, chair, drawer, table, window, book shelf, furniture and so on. If you are DIY furniture lover, you must have one!
- All components constructed of a thick and durable plastic, for sure support
- Comes in a solid white color to match white painted, metal drawer slide hardware
- Designed for use with most side mounted drawer track systems and accepts most all ball bearing drawer slide hardware
- Features deep socket depths to allow for easy front to rear adjustments
- Easy to install with only a few simple tools
- Used to support side mounted drawer glides
- 3/8 inch wide x 1 inch tall x 3-9/16 inch deep openings
- Fits drawer track systems that are 3/8 inch x 1 inch
- Off-white plastic construction
- Contains 1 pair of drawer track back plates (1 left and 1 right)
- 100-Pound load capacity
- The slide system includes left and right slides, along with the mounting hardware
- Mounts to the back of the cabinet, Includes both right and left sockets & mounting hardware
- Use to install European drawer slides to face frame cabinets
- White finish
- Premium Material: The drawer bottom supports are made of strong plastic, and the screws are made of superb stainless steel material with good toughness and strength, which will not deform or break, and are sturdy and durable for long time use.
- L-shaped Stable Design: The corner clips on the back of the drawer repair kit brackets are L-shaped designed and are used to reinforce right-angle corner joints to hold furniture securely in place.
- Easy to Install: Just manually insert the plastic drawer wedge into the crease of the back panel or corner of the drawer and screw it into the corner cabinet. With these small wedges, the sagging drawer compartment can be stabilized again.
- Wide Applications: These wedges are suitable for all kinds of furniture, bookcase, drawer, cabinet, wardrobe, etc., to quickly and easily eliminate the sagging of the drawer bottom.
- Package Included: You will receive 120 pcs drawer wedges with M3.5 x 16 mm metal self-tapping screws, sufficient quantity of repair fixing patch wedges can well meet your drawer repair needs or home furniture fixing repair needs.
- Harn metal drawer box front clip on fixing brackets. With #6 x 5/8" wood screws included.
- Included in package: 1 Left Bracket, 1 Right Bracket
- Material: Nickel plated steel
- Works with harn impaz metal drawer box slides
- These brackets can also replace the old bracket version.
- 【Installation note】Suitable for 12-14 inch drawers.The space between drawer and cabinet wall need to be 0.5in each at left and right side,total 1in ( inside cabinet width - outside drawer width= 1in ),Slide length:12"(307mm)--Fully extended length:24"(609mm).Quantity: 1 pair(2 pieces)一Mounting screws included.Note:For installation,make sure the two slide rails parallel to each other,and make sure the drawer portion slides parallel to the cabinet portion slides and in the same level.
- 【MAXIMUM LOAD CAPACITY: 100lb 】 The slides is made of 1.5mm High - density cold-rolled steel plates,it will keep your drawers stable and safe even carrying up to 100 lb heavy weight items,which take 100,000 times of push-pull tests full loaded without damage,the service life of the slide rail could be 30 years at least.
- 【Anti-rust & Smooth work 】The anti-rust ability and oxidation resistance of our slides is superior to the others because of the special electrophoretic coating surface treatment; With dual industrial grade bearing ball inside,the drawers slide smoothly even though carrying heavy items; With a rubber crash pad on,which is a wear-resisting and impact-resistant device,the drawers slide quietly without collision noise.
- 【3-Fold full extension & Detachable 】“The 3-fold full extension”enable the slides to fully extend, which designed to extend your drawer to a full open position so that you can access anything in the drawer without reaching under the lip of your cabinet; Detachable:There is a plastic buckle on the back of the slide rail, by pressing it,the 3rdtrack(the narrowest section) can be separated ,which means the drawer can be installed and detached easily by your will;
- 【Application range】 The slide rail is suitable for all kinds of home drawers and office furniture,It can apply to wardrobe drawers,keyboard drawers,cabinet drawers,wooden or steel drawer,toolbox drawers that with demand for big load-bearing capacity, etc. Our motto is “Use quality slides,live quality life” ,besides the quality, YENUO also focused on after-sales service,any quality or installing problem please feel free to contact us.
- VALUE PACK - Include 40PCS (20x20mm/0.79x0.79 Inch) black L bracket and 80PCS screws. They can meet all your different needs and provide a great value bracket package for your DIY projects.
- STRONGER & DURABLE- SEANSDA corner brace is made of high-quality stainless steel, rust-proof, sturdy, will not twist or deform, and has a long service life. The black coated surface and round edge are smooth without burrs, no worry about scratching your hands or furniture.
- SUPER EASY TO INSTALL - SEANSDA metal L Brackets for Wood can help you repair shaky furniture quickly and easily. The attached self-tapping screws have a deep thread that offers firm fastening force and great grips in wood materials. Countersink mounting holes ensure the screws do not stand out, and tight-fitting 90-degree angle brackets give your furniture an aesthetic look.
- PERFECT DIY PROJECT - The metal corner brackets are for support in corners or projects that require 90-degree support. If you have rickety furniture that needs reinforcing, this is a quick and easy fix to help you stabilize items like bookcases, chairs, tables, beds, cupboards, drawers, desks, bookshelves, kitchen cabinets, wood frames, fences, closets, dressers, etc.
- SATISFACTION LIFETIME WARRANTY - SEANSDA L Brackets are super strong and easy to install. You'll love its sturdiness and strength. If you're not completely satisfied with your purchase, simply let us know and you'll be offered a FULL refund or replacement, no questions asked. Enjoy this absolutely RISK-FREE purchase today by clicking the yellow 'Add to Cart button above.
- Made from stamped steel with a white epoxy finish
- Self-closing functionality ensures that drawers stay firmly closed
- Rated for normal-duty use (loads up to 50 lbs)
- 3/4 extension opening allows for the majority of the drawer to be accessed
- Detailed instructions and mounting hardware are included
Last update on 2024-04-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23E-089
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : DECKED
Submission Date : NOV 20, 2023
NHTSA Recall No. : 23E-089
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : DECKED
Address : 110 Lindsay Circle
Ketchum ID 83340
Company phone : 8060251
Population :
Number of potentially involved : 200
Estimated percentage with defect : 100 %
Equipment Information :
Brand / Trade 1 : DECKED
Model : CargoGlide to Drawer System Brackets
Part No. : A0100-XCGB-BLK
Size : NR
Function : Mounting
Descriptive Information : Brackets used to securely mount CargoGlide product onto DECKED Drawer
System.
The brackets are designed to have studs press-fit into the metal to support the
CargoGlide unit when extended. The brackets have holes that are slightly too
large and as a result, the studs can spin loose when tightened down and
potentially come loose and pull through the holes. If enough of the studs failed
and pulled through the bracket then the CargoGlide unit could come dislodged
from the Drawer System when loaded and extended beyond the tailgate which
would create a safety hazard to the operator.
This issue was discovered during product testing on 11/13.
DECKED is reaching out to all 200 customers that have purchased these brackets
to date to notify them of the safety hazard and instruct them not to use the
brackets and to take the brackets + CargoGlide unit off of the Drawer System if
they have installed in their truck. DECKED has made, tested, and approved a new
design of bracket that mounts properly; all customers will receive the brackets
free of charge.
Production Dates : OCT 01, 2023 – OCT 31, 2023
Part 573 Safety Recall Report 23E-089 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Defect :
Description of the Defect : Brackets secure CargoGlide unit to the top of the Drawer System using press-fit
studs mounted into the metal brackets. To work properly, the holes in the
brackets must be sized precisely in order to maintain properly engagement
with the press-fit studs. The brackets received for production were out of spec
(holes were too large) and therefore product testing revealed that the studs
could spin loose when tightened and even pull through the brackets with
sufficient force applied.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : The main risk is that the studs in the bracket come loose and are pulled
through when supporting a CargoGlide unit that is loaded and extended
beyond the end of the truck’s tailgate. If enough studs failed in such a
scenario, the unit could become detached and fall out of the truck towards an
operator. Especially with a significant load on the tray, this creates the
potential risk of a heavy load falling out of a truck towards someone.
Description of the Cause : Holes made in the brackets at a supplier were out of spec (too large) to
properly secure the studs. DECKED has remedied the sizing of the holes with
this supplier and also sourced studs with a greater tolerance to prevent such
manufacturing defects from creating a safety risk in the future.
Identification of Any Warning
that can Occur :
Bolts can become loose during installation – notably they will spin within the
bracket hole as the customer is tightening the CargoGlide unit onto the
brackets.
Involved Components :
Component Name : CargoGlide to Full Size Drawer System – cabside
Component Description : Secures CargoGlide to Full Size Drawer System at the cabside of the truck bed
Component Part Number : DKD013-0501
Component Name : CargoGlide to Full Size Drawer System – middle
Component Description : Secures CargoGlide to Full Size Drawer System at the middle of the truck bed
Component Part Number : DKD013-0502
Part 573 Safety Recall Report 23E-089 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Component Name : CargoGlide to Full Size Drawer System – tailgate
Component Description : Secures CargoGlide to Full Size Drawer System at the tailgate side of the truck
bed
Component Part Number : DKD013-0503
Component Name : CargoGlide to Midsize Drawer System – cabside
Component Description : Secures CargoGlide to Midsize Drawer System at the cabside of the truck bed
Component Part Number : DKD013-0504
Component Name : CargoGlide to Midsize Drawer System – middle
Component Description : Secures CargoGlide to Midsize Drawer System at the middle of the truck bed
Component Part Number : DKD013-0505
Component Name : CargoGlide to Midsize Drawer System – tailgate
Component Description : Secures CargoGlide to Midsize Drawer System at the tailgate side of the truck bed
Component Part Number : DKD013-0506
Supplier Identification :
Component Manufacturer
Name : Folded Metal
Address : 146 Old Hwy 91 STE 1
Hurricane Utah 84737
Country : United States
Chronology :
On Friday 11/10/23, DECKED received notice from a customer attempting to use these brackets for installation
that the studs in the brackets were spinning when they attempted to tighten down a locking nut in order to
mount the CargoGlide unit. DECKED engineering department immediately began testing and was able to
identify the issue with sample parts.
Further inspection showed the that brackets provided for production builds had holes that were approximately
0.005″ out-of-spec vs. provided drawings which put them out of tolerance for the studs being used in the
Part 573 Safety Recall Report 23E-089 Page 4
The information contained in this report was submitted pursuant to 49 CFR §573
application. Further testing was conducted to measure pull strength of the studs on Monday, 11/13/23 after
which it was determined that a full product recall was required.
Description of Remedy :
Description of Remedy Program : Replacement brackets will be sent to all affected customers free of charge.
These brackets have a larger press-fit stud which has significantly more
material keeping the stud mounted into the bracket. DECKED engineering
has determined that these new studs work properly with the brackets
supplied, resulting in no looseness and a pull out strength of XXX.
Replacement of the brackets can be accomplished by the customer and
involved removing the CargoGlide unit, un-installing the defective brackets
and installing the replacement brackets. Afterwards, the same CargoGlide
unit can be installed onto the new brackets and the old brackets can be
discarded.
All 200 brackets sold and shipped out were sent directly to customers that
ordered off of DECKED’s own website. DECKED will contact all these
customers directly to inform them of the product recall and notify them of
the replacement process.
How Remedy Component Differs
from Recalled Component :
Remedy components have larger studs which is indicated by the size of the
material on the underside of each bracket.
Identify How/When Recall Condition
was Corrected in Production :
The larger press-fit studs were sourced and installed along with a new,
more precise press to ensure the correct tonnage is applied to the studs
every time on the line.
Recall Schedule :
Description of Recall Schedule : DECKED will begin calling customers as soon as possible to notify them of
the impending safety hazard. Official notification via email and mail will
be sent as soon as this recall notice is approved by NHTSA
Planned Dealer Notification Date : NOV 27, 2023 – DEC 31, 2023
Planned Owner Notification Date : NOV 20, 2023 – DEC 31, 2023
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Part 573 Safety Recall Report 23E-089 Page 5
The information contained in this report was submitted pursuant to 49 CFR §573
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END