Reduced Rear Impact Guard Protection – 2009-2024 Wabash Dry Van Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

September 20, 2023 NHTSA CAMPAIGN NUMBER: 23V646000

Reduced Rear Impact Guard Protection/FMVSS 224

In the event of a rear impact crash, the rear impact guard may not sufficiently protect light duty vehicles, increasing the risk of injury.

 

NHTSA Campaign Number: 23V646

Manufacturer Wabash National Corporation

Components STRUCTURE

Potential Number of Units Affected 3,448

 

Summary

Wabash National Corporation (Wabash) is recalling certain 2009-2024 dry van trailers equipped with a rail-style lift gate. Please see the recall report for a complete list of models. The location of the rear impact guard is too far forward from the rear of the trailer, reducing impact protection. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 224, “Rear Impact Protection.”

 

Remedy

Dealers will add an extension to the rear impact guard, free of charge. Owner notification letters are expected to be mailed November 17, 2023. Owners may contact Wabash customer service at 1-765-771-5404.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

8/24/23-A concern was submitted for a possible non-compliance.

8/29/23-Product Safety Team (PST) voted to investigate.

9/1/23-Met with outside counsel to define the ruling and what the makes the rear most of a trailer. Trailers were then measured in Lafayette and then placed on hold.

9/7/23-PST voted to escalate to the Product Safety Counsel (PSC). At close of business on 9/13/23, the PSC

 


16 Affected Products

Vehicle

MAKE MODEL YEAR
WABASH NATIONAL VAN 2009-2024

 


2 Associated Documents

Noncompliance Notice 573 Report

RCLRPT-23V646-6617.PDF 215.174KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.13 KB]

 


Recall Acknowledgement

RCAK-23V646-6355.pdf 1540.228KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.47 MB]

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V646&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
SaleBestseller No. 1
FH Group Universal Fit Rear Bumper Guard Protection Bumperbutler for Cars, Suvs, Vans, and Trucks Black
  • 🚘WARNING: Intended to be used on parked vehicles ONLY. Never drive with the BumperButler attached; using the BumperButler while driving may leave scratches on your car's exterior.
  • 🚘Dimensions: 43 X 11 inches
  • 🚘Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use. Loose dirt can be shaken out or vacuumed, and hard soiled areas can be hosed down with water and allowed to dry
  • 🚘Patented, durable, and long-lasting rubber design; Fits most sedan vehicles. Strong security straps help deter theft and add extra sturdiness
  • 🚘High-Intensity Safety Reflectors make the Bumper Butler stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations
Bestseller No. 2
SINGARO Car Rear Bumper Protector, 41inch x3.5inch Car/SUV Universal Rubber Anti-Scratch Trunk Exterior Accessories(Black)
  • High-quality material: High-quality soft and environmentally friendly material, reducing external impact, durable and scratch-resistant, flexible and flexible, and full of toughness.
  • Excellent performance: Anti-scratch, abrasion resistance, anti-aging, groove anti-skid design, effectively prevent items from falling, and provide protection for scratches.
  • Easy to install: After cleaning the location that needs to be installed, it can be installed privately without drilling or welding.
  • Wide range of application: The newly upgraded 41x3.5 inches is suitable for most models such as SUVs and trucks. Please measure the size of the installation location before purchasing.
  • Buy with confidence: If you have any questions, please contact us, we are always at your service.
Bestseller No. 3
Dawn Enterprises RBP-017 Rear Bumper Protector
  • Added protection against scuffs, nicks, scratches, and other damaging marks
  • Textured surface provides slip resistance
  • Quick and easy no-drill installation with the use of self-adhering 3M Tape
  • Attaches directly to your rear bumper
  • To ease concerns about fitment, use the size variations above to see images of our bumper protector on your vehicle
Bestseller No. 4
WeatherTech Custom BumperTopper for Toyota Camry Hybrid, Camry - Rear Bumper Protector (BP0021) Black
  • Fits select 2018-2024 Toyota Camry Hybrid, 2018-2024 Toyota Camry, 2025-2025 Toyota Camry Models. Please confirm fitment to your year, make, and model in Amazon Garage prior to purchase.
  • Coverage: Rear Bumper, Color: Black
  • Safeguard your rear bumper from scratches, paint chipping, and everyday wear and tear with the WeatherTech BumperTopper. Made from an impact-resistant hard plastic, it stands up to damage. When it’s time to trade your vehicle in, BumperTopper also helps cover small scuffs and blemishes to protect resale value.
  • BumperTopper attaches directly to your bumper’s surface with Very High Bond adhesive strips. A Center Indication Mark makes installation quick, easy and accurate. This rear bumper cover hugs the profile of your vehicle’s bumper for custom-fit protection. BumperTopper is thin enough (3mm) to allow complete closure of your trunk or hatchback, yet tough enough to protect your vehicle.
  • Made in USA!
SaleBestseller No. 5
Car Rear Bumper Guard, DIY Peel & Stick On Car Bumper Protector, Adhesive Bumper Protector for Cars, Tough Rubber Protective Strip Universal Fit, 6 x 62 inches - BumperX
  • Quality Bumper Guards for Cars - Protect your car from any “love taps” without ruining its looks with our rear bumper guard. It’s crafted from a formulated premium grade EDP rubber that is soft and elastic. Our bumper rubber guard is tough and built to last for years.
  • Suitable for the Outdoors - Designed to last, our car bumper guard uses a special 3M adhesive car bumper tape. It easily adheres to automotive clear coats, plastic, and metal. It’s also resistant to UV rays and harsh weather conditions.
  • Customizable Car Bumper Strip - Aiming for a better fit? You can easily trim this rear bumper protector to suit flat bumpers. It’s also lightweight, allowing you to handle and install it quickly. You can use it as a front bumper guard, too, with careful measurements and trimmings.
  • Preserves Your Vehicle - Say goodbye to constant repairs and long waiting hours in the shop with our car bumper protectors! Cover up dents and scratches or safeguard your vehicle with this auto bumper guard. It’ll act as your car’s second skin!
  • Sleek Universal Design - No more blemishes or repaints—enhance your car’s appearance and appeal when you stick this car rubber bumper guard. BumperX’s rear bumper cover comes in black. It can cover any tiny flaws and complement any car color.
Bestseller No. 6
BumperBully - The Ultimate Outdoor Rear Bumper Guard (Black Edition)
  • SUPER WIDE Bumper Protection Area; The Largest Bumper Protector!
  • PREMIUM Grade Rubber Material
  • Patented Stabilizer Bars Keep The BumperBully FLAT Against Your Bumper
  • PREMIUM Grade Rubber Material (PVC FREE)
Bestseller No. 7
T-Rex Bumper Protector, Rear Bumper Guard for Cars
  • Comprehensive Protection: The TrexNYC Rear Bumper Guard Protector offers all-around defense for your vehicle against dents, dings, and scratches while parking. Its universal size and innovative design ensure a snug fit on any vehicle, wrapping around the corners for maximum coverage.
  • Corner Wrapping Design: Unlike traditional bumper guards that only cover a portion of the rear bumper, the TrexNYC Rear Bumper Guard Protector wraps around the corners of your car, providing enhanced safeguarding. This design ensures that vulnerable areas are fully shielded, giving you peace of mind whenever you park.
  • DIY Installation: Effortlessly install this bumper guard. No tools or professional assistance is required. Simply attach the loop straps to your trunk's carpet, ensuring a secure hold, and fix the hooks at the end of the straps outside of the rear bumper. It's a hassle-free process that anyone can easily complete.
  • Universal Fit: The TrexNYC rear bumper guard offers a versatile fit with its 72-inch width and 1/4-inch thickness and 8 inches high, designed to accommodate most vehicles. With this adaptable sizing, it provides substantial protection while maintaining a sleek profile, ensuring compatibility with a wide range of vehicle types.
  • Durable All-Weather Material: Crafted from durable all-weather material, this bumper guard is built to withstand the elements and provide long-lasting protection for your vehicle. Whether it's rain, snow, or intense sunlight, this guard will maintain its integrity and keep your car safe from damage.
Bestseller No. 9
Motor Trend Bumper Guard for Cars - Heavy-Duty Rear Car Bumper Protector for Parked Vehicles, High Intensity Reflector for Nighttime Visibility, Easy to Install for Cars and Small SUV's
  • PROTECTS AGAINST DENTS AND SCRATCHES – Keep your car bumper protected from reckless damage while parked on the street with this heavy-duty bumper guard for cars. Measures 48” Wide by 14” Tall for maximum coverage.
  • QUICK AND EASY TO INSTALL – Our Rear Bumper Protector can be quickly installed on the back of any car or small SUV by attaching the adjustable straps to the carpet lining of your trunk. Hook and loop strips are included for for non-carpeted trunks.
  • ENHANCED VISIBILITY AT NIGHT – High-Intensity dual reflectors along the bottom provide extra visibility during nighttime to avoid potential parking accidents.
  • FITS MOST CARS – Designed to fit a wide variety of sedans and other small vehicles. Bottom corners can be trimmed to accommodate mufflers openings. Please see installation images for examples.
  • PATENTED DESIGN - Unique Top Tension System Provides Rigid and Durable Support
SaleBestseller No. 10
BumperBadger The Original Rear Bumper Protector and Rear Bumper Guard (BumperBadger HD)
  • Patented Top Stabilizer Bars – Keeps Product Flat on the Bumper
  • Premium Quality Material – All Weather Protection
  • Impact Absorption Zones – Raised Ribs Cushion Minor Parking Bumps
  • Extra Wide Protection Area For Maximum Protection
  • Triple Stitched Trunk Straps - For Durability and Strength

Last update on 2024-05-14 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...