Loose Wire Connections in Transfer Switch – 2022-2023 ATC PL700 Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

August 21, 2023 NHTSA CAMPAIGN NUMBER: 23V590000

Loose Wire Connections in Transfer Switch

Loose wire connections can overheat, increasing the risk of a fire.

 

NHTSA Campaign Number: 23V590

Manufacturer Aluminum Trailer Company (ATC)

Components ELECTRICAL SYSTEM

Potential Number of Units Affected 58

 

Summary

Aluminum Trailer Company (ATC) is recalling certain 2022-2023 PL700 trailers. The wire connections in the transfer switch may be tightened improperly and loosen.

 

Remedy

Dealers will tighten the wire connections, free of charge. Owner notification letters were mailed August 30, 2023. Owners may contact ATC customer service at 1-877-441-2440 ext. 342.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Why Is a Recall Being Conducted?

The trailer specified may potentially have loose wire connections within the transfer switch which could cause friction, increasing the risk of a fire. Connections within the transfer switch must be torqued to the proper specifications, free of charge. ATC strongly recommends this service be done at an authorized service facility to ensure proper torquing is attained.

Safety of all past and present ATC trailers is our top priority.
Our records indicate that you purchased model —
model trailer; VIN; If you are still the current owner of the trailer, we need your help to make arrangements to inspect this trailer.

 

What You Should Do

Please contact Customer Support at The Aluminum Trailer Company by mail, P.O. Box 396 Nappanee, IN 46550; by phone (877) 441-2440, or electronic mail customersupport@atctrailers.com. We will then make arrangements to refer you to the closest dealer to make the required repairs. We estimate the time to perform the labor required to correct the defect to be 0.25 hours. Please ask the dealer directly if you wish to know how much additional time will be needed to schedule and process your trailer.

If you have already paid to have your trailer repaired for this condition, you may be eligible for reimbursement of the charges you paid for the repair or replacement, as applicable. To learn more about what you need to do to obtain reimbursement, contact Customer Support above.

If you are a lessor, Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.

 


The Aluminum Trailer Company
751 N. Tomahawk Trail P.O. Box 396
Nappanee, IN 46550
(877) 441-2440

August 30th, 2023

RE: IMPORTANT SAFETY NOTIFICATION – NHTSA Recall 23V590 – ATC PL700 5th Wheel

To: Dealer

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
The Aluminum Trailer Company (“ATC”) has decided that a defect, which relates to motor vehicle safety, exists in certain 2022 – 2023 ATC PL700 5th Wheels that were manufactured by ATC from August 2022 to July 2023.

The trailer specified may potentially have loose wire connections within the transfer switch which could cause friction, increasing the risk of a fire. Connections within the transfer switch must be torqued to the proper specifications. Safety of all past and present ATC trailers is our top priority.

Owners will be notified by mail about the recall. ATC will supply the required work instructions for the repair. We estimate the time to perform the labor required to correct the defect to be 15 minutes. There is no cost to owners for this recall. ATC will reimburse any customer who incurred costs to repair the defect before our notification was sent.
Please be reminded that it is a violation of Federal law for you to sell or lease the trailers covered by this notification until this recall has been performed on these trailers. Substantial civil penalties apply to violations of this law.

Your assistance with this recall is appreciated. Should you have any questions or concerns, please contact Customer Support at The Aluminum Trailer Company by mail, P.O. Box 396 Nappanee, IN 46550; by phone (877) 441-2440, or electronic mail customersupport@atctrailers.com.

Sincerely,

The Aluminum Trailer Company

 


Chronology :

We had a warranty claim of a transfer switch smoking and burnt wires. Our service department found a separate unit with loose connections in the transfer switch. This initiated an investigation. After the investigation was performed it was found that the improper tool was being used to attach the wires in the transfer switch which could result in the connections being loose. It was decided on 8/17/23 to continue with a NHTS recall to have these connections checked for proper torque.

 


2 Affected Products

Vehicle

MAKE MODEL YEAR
ATC PL700 2022-2023

 


6 Associated Documents

Defect Notice 573 Report

RCLRPT-23V590-7633.PDF 215.265KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.22 KB]

 


Recall Acknowledgement

RCAK-23V590-8677.pdf 645.326KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.20 KB]

 


Part 577 Owner Notification Envelope

RONE-23V590-9770.pdf 95.342KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [93.11 KB]

 


Manufacturer Notices(to Dealers,etc) – August 17th, 2023

RCMN-23V590-2510.pdf 93.623KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [91.43 KB]

 


Safety Bulletin

RCSB-23V590-9997.pdf 182.041KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [177.77 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-23V590-9860.pdf 280.692KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [274.11 KB]

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V590&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
PowerMax PMTS-30 30 Amp Automatic Transfer Switch with 12 Volt DC Relay | 2 – 110Vac inputs to a Single 110Vac Output | Off-Grid | Back-up Power Solutions
  • HIGH-QUALITY PRODUCT The PMTS automatic transfer switches are designed for use in RV’s with 30 AC service. When plugged into the shore power it will automatically provide AC power to all AC appliances. To operate your appliances from an onboard generator or alternative Power source simply start them and the PMTS-30 will automatically transfer the electrical power to AC appliances. They also feature a time delay of 20-30 seconds to allows the generator voltage to stabilize

  • BEST FEATURES This automatic transfer switch features automatic transfer between 2 – 110 Vac inputs to a single 110 Vac output. It is also an ideal use for RVs, off-grid, and backup power solutions. This comes with a 30A size with 12 Volt DC Relay. And of course, a two-year warranty.

  • SAFE TO USE This automatic transfer switch will not boil the battery. It has an Intelligent way to charge and maintain your RV battery and very easy to install so it’s a free hassle to use.

  • NO NEED TO REWIRE With no need to re-wire, installation is only 10 minutes! It has an automatic three-stage converter that handles every charging need for the RV while extending the battery’s life. Well-maintained batteries should never need more than two-stage (normal and trickle) charging.

  • CONSTANT AND STABLE Power supply mode provides stable power to maintain system voltage for use in a wide variety of applications. Provides a constant clean power supply for using scan tools and reprogramming of ECMs without discharging the battery

Bestseller No. 2
Go Power! TS-30 30 Amp Automatic Transfer Switch , Black
  • Can handle 2 sources of 30 amps at one time
  • Made for use with inverter, shore power or generators
  • Delay switch for use with generators
  • Comes with knockouts for easy and professional installation
  • Single relay
Bestseller No. 3
Furrion 50 Amp Automatic Transfer Switch for RV to changeover input between 125/250Volt AC power sources. With Vibrationsmart & Climatesmart Technology- F50-ATS , Black
  • Safe and Automatic Transfer Switch - Furrion’s 50amp Automatic Transfer Switch has a built-in safe switch interlock system and is used to automatically switch between two separate 125 /250 volt AC power sources. These power sources can be from a Generator, shore power cord or inverter
  • Avoid Over-voltage - Provides an added feature of a mechanical interlock between contractors to ensure both contactors cannot be closed in parallel, preventing overvoltage on the output line.Casing Material: UL 94 Fireproof Plastic
  • Time Delay - Once AC power from the Generator is sensed by the transfer switch at Input 2 terminals, it will start a timer and automatically switch over to generator power supply after a 20-30 sec delay which ensures the generator has sufficient time to run up to speed before electrical load is applied.
  • Durable & Reliable: Designed with Furrion's proprietary VibrationSmart and ClimateSmart technologies, this ATS is built to withstand constant vibrations & extreme temperatures. Solid brass terminals are used to increase conductivity and reduce heat and are Nickel plated for corrosion resistance.
  • Highest Safety Standards - The Automatic Transfer Switch comes in a UL94 Flame retarded enclosure and is certified to UL Standards UL1008.
Bestseller No. 4
Nirakoka RV Automatic Transfer Switch, Rated 240VAC 50A 70A Neutral - Applied to RV, Speedboats, 120/240 Volt Power Sources
  • Nirakoka RV Automatic Transfer Switch has been pre-wired to automatically change the primary source of AC current from shore power to generator or inverter power when activated.
  • WIDE APPLICATION — Applied to RVs, speedboats, and various high-power equipment that requires emergency power supply.
  • AUTOMATICALLY SWITCH — This Automatic Transfer Switch 50 AMP can be used to automatically switch between inverter power and a generator. It switches to inverter power when the generator stops running. In the event of a inverter power outage, the generator will start automatically. The green L.E.D is lit when generator power is present.
  • DOUBLE PROTECTION — Double protection of built-in mechanical interlocks and control circuits prevents two separate 120/240 volt AC power sources from entering the AC distribution board at the same time and causing a short circuit.
  • TIME DELAY CIRCUIT — Once AC power from the Generator is sensed by this RV Automatic Transfer Switch, it will start a timer and automatically switch over to generator power supply after a 20-45 sec delay which ensures the generator has sufficient time to run up to speed before electrical load is applied.
Bestseller No. 5
Progressive International Dynamics PD52V 5200 Series Automatic Transfer Switch - 240 VAC, 50 Amp
  • Rugged, heavy duty, screw type wiring terminals ready to wire to contactor base.Fit Type: Universal Fit
  • Time delay circuit board ensures generator voltage is at a stable level before transfer occurs. Automatically senses generator power and prevents two power sources from entering the AC Distribution Panel at the same time
  • Easy-to-remove protective cover with wiring schematic inside
  • 240 VAC, 50 Amps
  • One-year limited warranty
SaleBestseller No. 6
Mocar7 RV Automatic Transfer Switch,50 AMP Automatic Transfer Switch for RV, Speedboats, 120/240 VAC, 50 Amp, Automatic Transfer Relay Switch
  • 50 amp Automatic transfer switch can be used to automatically switch between inverter power and a generator. rv transfer switch automatically senses generator power and prevents two power sources from entering the AC distribution panel at the same time.
  • 50 amp, 120v transfer switch/ 240 AVC is your good choicce. If you are using public power and it goes out, when the generator is turned on it will automatically switch the power to it.The green light is in an active state
  • This RV automatic transfer switch has a 30 second selectable delay with quick-connect terminals for easy installation.Wide application-RV, SPEEDBOAT,OUTDOOR. * Function:120/240 VAC, 50 Amp
  • Automatic transfer switch transfer 50 amp has been pre-wired to automatically change the primary source of AC current from shore power to generator or inverter power when activated
  • Reliable Service. If you have any question about this generator transfer switches, please contact us. 12 month warranty of this automatic transfer switch, buy with confidence.
Bestseller No. 7
RV Transfer Switch, Briidea Automatic Transfer Switch 50 Amp Applied to RV, Speedboats, 120/240 VAC
  • NEW GENERATION: Our generator's automatic transfer switch is configured to prioritize generator power. It automatically switches to utility power when the generator stops running. When the generator restarts, the green light indicates that the generator power is active. Additionally, the switch continuously monitors the utility power status. In the event of a utility power outage, the generator will start automatically, requiring no extra wiring on your part, providing exceptional convenience
  • DELAY CIRCUIT PROTECTION FUNCTION: When switching to the generator power supply, the built-in MCU precise control circuit is connected with a delay of 20s, so that the generator voltage is maintained at a stable level and then transmitted. Double protection of mechanical interlocks and control circuits prevents two power sources from entering the AC distribution board at the same time and causing a short circuit
  • DURABLE ENCLOSURE: The coating process used on the surface of our products can be waterproof, rust-proof and anti-corrosion.The waterproof level can reach ip65, which can effectively prolong the service life of the product so that it's very durable
  • EASY TO INSTALL: Our products have simple installation steps, easy-to-remove protective cover with wiring diagram inside,and the internal copper wiring is more concise and durable
  • WIDE APPLICATION: 120/240 VAC, 50 Amps. It can be applied to RVs, speedboats, and various high-power equipment that requires emergency power supply
Bestseller No. 8
50 Amp Transfer Switch Automatic Transfer Switch for RV, Speedboats 120/240 VAC, 50 Amp, Automatic Transfer Relay Switch
  • 🚘Double Protection — Double protection of built-in mechanical interlocks and control circuits prevents two separate 120/240 volt AC power sources from entering the AC distribution board at the same time and causing a short circuit.
  • 🚘This automatic transfer switch has a 30 second selectable delay with quick-connect terminals for easy installation.
  • 🚘This transfer switch has been pre-wired to automatically change the primary source of AC current from shore power to generator or inverter power when activated
  • 🚘Easy-to-remove protective cover with wiring schematic inside
  • 🚘1 year warranty is provided. If you have any problem , please feel free to contact us
Bestseller No. 9
AC120V 15Amp Automatic Transfer Switch, ATS Auto Transfer Switch, HD060
  • HCDC HD060 Automatic transfer switch, an easy to mount 15Amp inline transfer relay provides switching between AC INPUT 2 (Utility or Shore Power) and AC INPUT 1 (Inverter or Generator) AC source. When AC INPUT 2 is powered, the load power will be switched to AC INPUT 2. When AC INPUT 2 is powered off, the load power will be switched to AC INPUT 1.
  • Operating voltage AC 90 to 135V 50/60Hz. Maximum current 15 Amp. Transfer time less than 30mS (0.03 second). For most smart devices or computers, the switching action of 30mS time will not affect their normal operation.
  • Internal four high power SPST relays switch design, effectively avoid the problem of DPDT relay high inductive load arcing. Live and Neutral wire are switched at the same time. The Ground wires of the two inputs and output are connected together internally and will not follow the switch on and off.
  • IP68 Waterproof high level enclosure, suitable for indoor or outdoor use. Flame retardant rating V1. Case material: PC (Polycarbonate). Seal material: Silicone rubber. External screw: 304 stainless steel.
  • AC INPUT 1 cable: Length 19 inch (0.5 meter), US standard NEMA 5-15P 3 prong plug. AC INPUT 2 and AC OUTPUT cables: Length 19 inch (0.5 meter), 14AWG (2.08 square millimeter) x 3 cores.
SaleBestseller No. 10
110V Dual Power Automatic Transfer Switch Dual Power Generator Changeover Switch 50HZ/60HZ (2P 63A Blue)
  • ⚡Application automatic transfer switch device:Line Voltage: AC110V;Line Current: 6A-63A;Operating Frequency: 50HZ/60HZ; insulation Voltage: AC110V
  • ⚡Conversion Time: 2S or so;Conversion Mode: self cast; Display Function: Indicator light display;Installation Dimension: 128mm*122mm hole: M6
  • ⚡When one power goes wrong (only test normal Phase A voltage and reserve Phase A voltage, only test loss voltage or loss phase),it will automatic connect one or several load circuits from one power to the other power automatically, to ensure normal power supply of load circuits.
  • ⚡Complete protection function:This switch support variety protection function, including short circuit, overload, lack of phase, under voltage protection.
  • ⚡Easy installation:Reasonable structure, small size, equipped with protective cover, power supply is easy to install and reliable.

Last update on 2024-06-13 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...