“This site contains affiliate links for which OEMDTC may be compensated” |
August 17, 2023 NHTSA CAMPAIGN NUMBER: 23V587000
A broken driveshaft can separate and cause a loss of drive power, increasing the risk of a crash.
NHTSA Campaign Number: 23V587
Manufacturer Navistar, Inc.
Components POWER TRAIN
Potential Number of Units Affected 624
Summary
Navistar, Inc. (Navistar) is recalling certain 2023 International MV and International HV vehicles. The driveshafts can break under certain loading conditions.
Remedy
Dealers will replace the driveshafts, free of charge. Owner notification letters are expected to be mailed October 16, 2023. Owners may contact Navistar’s customer service at 1-800-448-7825. Navistar’s number for this recall is 23520.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
- 05/24/2023 – Navistar Compliance, Service Engineering, and R&D Engineering meet with Dana to discuss recent driveshaft failure reported in a Field Service Report.
- 06/08/2023 – Navistar ships failed part to Dana for part analysis.
- 07/20/2023 – Dana informs Navistar they have submitted 23E-052 on 7/10/2023.
- 07/25/2023 through 08/09/2023 – Navistar and Dana meet to determine the impact to International trucks and finalize the suspect population.
- 08/10/2023 – Navistar declares a Safety Recall.
2 Affected Products
Vehicles
MAKE | MODEL | YEAR |
INTERNATIONAL | HV | 2023 |
INTERNATIONAL | MV | 2023 |
2 Associated Documents
Recall Acknowledgement
RCAK-23V587-5904.pdf 645.783KB
Defect Notice 573 Report
RCLRPT-23V587-6118.PDF 214.622KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V585&docType=RCL
- Forged from the finest chrome molybdenum alloy steel-the best choice for strength and durability
- Radius corner design-to extend the life of fasteners
- The design drives the side of the fastener instead of the corner
- Provides increased strength, but also avoids rounding of rusted or damaged fasteners
- 1/2-Inch drive, 1/2-Inch 12 point driveline socket
- 4-inch length reaches past cam and rocker assembly to service head bolts
- Includes head bolt sockets for Nissan, Toyota, Honda, and Ford/GM cars and trucks
- Forged from high quality chrome-molybdenum alloy steel for maximum durability
- Thin profile sockets will reach through the access hole and past overhead camshaft
- All Sunex impact sockets meet or exceed ASME specifications
- Great for most limited access fasteners
- Includes driveline sockets for Chevrolet, Chrysler, Dodge, Ford, GMC and Jeep models
- Heavy duty blow molded storage case
- Remove and install driveline bolts, torque converters, cylinder heads, and 4x4 transmission casings
- SAE - inches: 5/16, 3/8, 7/16, 1/2, 9/16, 11/16, 3/4
- Model Number: 312ZUM
- Item Package Length: 3.49999999643"
- Item Package Width: 1.49999999847"
- Item Package Height: 0.99999999898"
- Forged from the finest chrome molybdenum alloy steel-the best choice for strength and durability
- Radius corner design-to extend the life of fasteners
- The design drives the side of the fastener instead of the corner
- Provides increased strength, but also avoids rounding of rusted or damaged fasteners
- 1/2-Inch drive, 3/8-Inch, 12 point driveline socket
- Cr-mo steel: provides the strength and flexibility to handle high torque impact tools.
- Radius corner design: reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
- Bold laser mark: the higher visibility marking allows for fast identification.
- Heavy duty storage case: convenient impact socket transport and storage.
- Socket for various car models: Includes driveline sockets for Chevrolet, Chrysler, Dodge, Ford, GMC, and Jeep models.
- Wide range of professional automotive specialy tools
- Professional grade
- Heavy duty design
- Forged from the finest chrome molybdenum alloy steel-the best choice for strength and durability
- Radius corner design-to extend the life of fasteners
- The design drives the side of the fastener instead of the corner
- Provides increased strength, but also avoids rounding of rusted or damaged fasteners
- 1/2-Inch drive, 12mm, 12 point extra deep impact socket
Last update on 2024-04-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-587 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Navistar, Inc. Submission Date : AUG 17, 2023 NHTSA Recall No. : 23V-587 Manufacturer Recall No. : 23520 Manufacturer Information : Manufacturer Name : Navistar, Inc. Address : 2701 Navistar Drive Lisle IL 60532 Company phone : 331-332-1590 Population : Number of potentially involved : 624 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2023-2023 International MV Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : • The suspect population is identified by models equipped with feature code 06DGA or 06DGJ (Dana Service Free SPL100 drive line system). • The inclusive dates of manufacture were determined by when Navistar manufacturing began use of nonconforming drivelines through the date Navistar Manufacturing began use of conforming drivelines. • The vehicles in the suspect population were built with nonconforming SPL100 drivelines and all similar vehicles not subject to this recall were built with conforming SPL100 drivelines. There are 611 MV series trucks in the suspect population. Production Dates : JUL 26, 2022 – DEC 13, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 23V-587 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 2 : 2023-2023 International HV Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : • The suspect population is identified by models equipped with feature code 06DGA or 06DGJ (Dana Service Free SPL100 drive line system). • The inclusive dates of manufacture were determined by when Navistar manufacturing began use of nonconforming drivelines through the date Navistar Manufacturing began use of conforming drivelines. • The vehicles in the suspect population were built with nonconforming SPL100 drivelines and all similar vehicles not subject to this recall were built with conforming SPL100 drivelines. There are 13 HV series trucks in the suspect population. Production Dates : AUG 19, 2022 – SEP 27, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : As reported in Dana Incorporated (Dana) recall 23E052, due to the supplier’s use of nonconforming material in its production processes, the specified driveshafts do not meet specification and can break in certain high loading conditions. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : As reported in Dana recall 23E052, in the event a driveshaft breaks, it can separate from the vehicle, which could increase the risk of a crash. Description of the Cause : As reported in Dana recall 23E052, due to an error in the supplier’s production processes, nonconforming material was used to manufacture the specified driveshafts. Identification of Any Warning that can Occur : None Involved Components : Component Name 1 : Prop Shaft Component Description : Short coupled driveshaft Component Part Number : 410LTB1120 and 410LTB1280 Part 573 Safety Recall Report 23V-587 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Supplier Identification : Component Manufacturer Name : Dana Incorporated Address : 3939 Technology Drive Maumee Ohio 43537 Country : United States Chronology : • 05/24/2023 – Navistar Compliance, Service Engineering, and R&D Engineering meet with Dana to discuss recent driveshaft failure reported in a Field Service Report. • 06/08/2023 – Navistar ships failed part to Dana for part analysis. • 07/20/2023 – Dana informs Navistar they have submitted 23E-052 on 7/10/2023. • 07/25/2023 through 08/09/2023 – Navistar and Dana meet to determine the impact to International trucks and finalize the suspect population. • 08/10/2023 – Navistar declares a Safety Recall. Description of Remedy : Description of Remedy Program : • The remedy will involve replacing the suspect drive shafts. • Navistar’s plan for reimbursement of pre-notification remedies, on file with NHTSA and dated 05/06/2022, applies and reimbursement instructions will be included in the customer notification. How Remedy Component Differs from Recalled Component : The remedy driveshafts are manufactured with conforming material where the recalled drive shafts were not. Identify How/When Recall Condition was Corrected in Production : 07/18/2022 – Navistar manufacturing began use of SPL100 drivelines manufactured with conforming material. Recall Schedule : Description of Recall Schedule : It is estimated that the Customer and Dealer notification letters will be mailed by 10/16/2023. Planned Dealer Notification Date : OCT 16, 2023 – OCT 16, 2023 Planned Owner Notification Date : OCT 16, 2023 – OCT 16, 2023 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END