“This site contains affiliate links for which OEMDTC may be compensated” |
July 17, 2023 NHTSA CAMPAIGN NUMBER: 23V490000
An axle that moves out of position can cause a loss of vehicle control and increase the risk of a crash.
NHTSA Campaign Number: 23V490
Manufacturer Grand Design RV, LLC
Components SUSPENSION
Potential Number of Units Affected 6,270
Summary
Grand Design RV, LLC. (Grand Design) is recalling certain 2021-2024 Momentum and Solitude fifth wheels, equipped with certain CURT 7000 and 8000 lb axles. The U-bolts may have been improperly tightened, which can cause the axle to move out of position.
Remedy
Dealers will inspect and tighten the U-bolts, as necessary. Any damaged components will be replaced. Repairs will be performed free of charge. Owner notification letters are expected to be mailed August 16, 2023. Owners may contact Grand Design customer service at 1-574-825-9679. Grand Design’s number for this recall is 910039.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
- January 20, 2023 – Grand Design receive reports of two axle failures where the spring appeared to separate on the axle, allowing the axle to shift location.
- March 14, 2023 – Grand Design notified Lippert Components (LCI) of additional complaints regarding failed leaf springs on Curt axles. Grand Design contracted third party for testing of tie plates and leaf springs.
- March 17, 2023 – Grand Design met with LCI to discuss testing results. It was determined further testing was required.
- April 13, 2023 – Grand Design was advised by LCI to increase U-bolt torque to 80 ft. lb.
- May 25, 2023 – LCI recommended increasing end of line torque to 90 ft. lbs.
- June 15, 2023 – Grand Design met with LCI to review test results and known field incidents on CURT axles.
- July 7, 2023 – Received formal notification of Lippert recall 23E-050.
- July 11, 2023 – Grand Design Product Safety Review Committee met and affirmed scope for impacted CURT axle springs.
Grand Design is aware of 45 incidents starting in January 2023 to June 2023. Two of the incidents resulted in an accident. Grand Design is not aware of any injuries as a result of this condition.
23E050 – Improperly Tightened U-Bolt – Curt 7000 & 8000 lb Axles
23E050 – Improperly Tightened U-Bolt – Curt 7000 & 8000 lb Axles
8 Affected Products
Vehicles
MAKE | MODEL | YEAR |
GRAND DESIGN | MOMENTUM | 2021-2024 |
GRAND DESIGN | SOLITUDE | 2021-2024 |
2 Associated Documents
Recall Acknowledgement
Defect Notice 573 Report
RCLRPT-23V490-1149.PDF 216.533KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V490&docType=RCL
- Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
- Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
- Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
- Accessories included: 1/2" Drive 5" long Extension Bar and 1/2" Drive to 3/8" Drive Reducer
- Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
- PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
- DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
- PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
- COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
- ±3% HIGH PRECISION AND COOL APPEARANCE: 1/2 inch drive torque wrench (10-170ft.-lb/13.6-230.5Nm)has a calibration error range of ±3%, high precision, and comes with a corresponding serial number, which is easy to trace the original data, and you can use it with confidence.Hairich torque wrench not only has superior quality but also has a superior appearance. The classic combination of black and red is fashionable and textured, allowing you to enjoy a visual feast during use.
- PREMIUM MATERIAL AND DURABLE: Experience the ultimate durability and antiskid with the torque wrench. The main body of Hairich torque wrench set is made of chrome vanadium steel alloy, which is more strong and more durable. The head of the inch-pound torque wrench adopts a ratchet design with a reversing device to improve work efficiency. The square knurled handle is made of aluminum titanium alloy, which is ergonomic and comfortable to hold for long-time use.
- DUAL SCALE AND QUICK SETTING: Laser Printed by dual-range(ft-lb and Nm). Our professional torque wrench is easy to read and provides direct unit conversion, When the set torque value is reached, the torque wrench will make an audible and felt click to remind you to stop applying force. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value.
- ERGONOMIC DESIGN AND POWERFUL: Every design of our industrial torque wrench conforms to ergonomic, easy to handle.72-tooth ratchet, 5° ratcheting arc head, a quick-release button for easy loading and unloading, and an aluminum non-slip handle for excellent grip and control. A recent research review that, 72-tooth ratchets are very professional tooth ratchets, you just only rotate 5 degrees to finish it. Not easy to slip and wear, can be used in small spaces, and is more durable and powerful.
- EASY OPERATION AND SAFETY: Thanks to its bidirectional drive ratchet head, our torque wrench can be measured both clockwise and counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque. Notice: At low Nm settings under 5 Nm the "click" sound can be too light to hear.
- 【High Precision&Quick Reading】: 3/8 torque wrench has high contrast and dual range scale( 5-45 Ft-Lb/6.8-61 Nm),making it clear and easy to read. We have professional torque wrench production technology, and after 20000 tests, the calibration error range of the torque wrench is ± 3%, making it an essential helper for you.
- 【Safe and Reliable Operation】: Equipped with a bidirectional drive ratchet head, torque can be measured clockwise or counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque.
- 【High Quality and Durable Material】: Made of hardened chromium vanadium steel alloy (Cr-V). At the same time, the bottom buckle tail plug adopts a red anodizing process to improve the product's oxidation resistance during use and enhance surface wear resistance. 72 tooth ratchet head, made of chromium molybdenum steel. High quality materials resist corrosion and are durable.
- 【Quick Torque Setting】: Simple and fast torque setting, pull down the locking knob and hold it down to rotate to the torque you need. Release the hand and the locking knob will automatically rebound to lock the torque value. And the designer referred to the appearance of the flashlight handle and designed a non slip and labor-saving knurled handle, making it more comfortable and easy to hold when using.
- 【Easy to Store and Widely Use】: You will receive the 3/8-inch drive click torque wrench with a sturdy plastic shell storage box, which is very delicate and durable. Torque wrench is suitable nuts and bolts on various occasions, such as bike, motorcycle, car spark, and is the best helper for you🎁. 🔔 And we provide 12 months warranty. If you have any questions, please feel free to contact us.
- 【3Pcs Torque Wrench Set】 The calibration error range is ±3%, each torque wrench has a calibration certificate. The 3-in-1 torque wrench set can meet your different needs. Including 1/4 inch 20-240in.lb, 3/8 inch 5-45ft.lb, 1/2 inch 20-160ft.lb.
- 【Safe & Reliable】 When the 1/2 torque wrench reaches the preset torque value, it makes a clear "click" sound, accompanied by an obvious hand vibration that reminds you no longer to apply force, prevent damage caused. 72-tooth reversible ratchet head, it can be used both clockwise and counterclockwise directions.
- 【Quick Release Button】 This 3/8 torque wrench has a quick release button with which accessories can easily be installed and removed, the accessories can grip and is not easy to fall down. It is more convenient to use. The torque wrench is made of CR-MO with a higher hardness.
- 【Easy to Set】First pull down the locking knob and hold it down and then start setting the desired torque value. Release the hand and the locking knob will automatically rebound to lock the torque value. If you do not use, please set the torque key to the minimal torque value.
- 【Widely Use】The torque wrenches can satisfy you in bicycle, motorcycle, car, truck and wheel screws, wheel nuts and in the device installation, electrical engineering, etc. We provide 12 months warranty. If you have any questions, please feel free to contact us.
- PORTABILITY: Torque wrench 1/2 inch drive has a durable case for portability or storage
- ADDED COMFORT: Bi-material handle for comfort and grip of the 1/2 torque wrench
- HASSLE FREE USE: Locking feature adjusts quick and easily for hassle free use
- QUICK IDENTIFICATION: Scales stamped into housing showing inch and metric torque settings
- Meets or Exceeds ASME Specifications
- 🔧【𝐌𝐢𝐥𝐢𝐭𝐚𝐫𝐲-𝐠𝐫𝐚𝐝𝐞 𝐒𝐭𝐞𝐞𝐥】ETOOLAB torque wrench utilizes military-grade steel as its base material, coupled with professional surface rust protection methods tailored to usage habits. While ensuring user comfort, it enhances product strength, wear resistance, and rust resistance. offers a more comfortable experience and a longer lifespan!
- 👍【𝐄𝐚𝐬𝐲-𝐭𝐨-𝐑𝐞𝐚𝐝】The scale of this 1/2 drive torque wrench is laser-engraved, using a black background with white markings. dinamometrica de 1/2 ensures clear and easy readability of the scale, even in sunlight. With a dual-scale design, users can conveniently read torque values in two different units according to their preferences, without the need for conversion!
- ⚙️【±𝟑% 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 & 𝐒𝐢𝐦𝐩𝐥𝐞 𝐋𝐨𝐜𝐤𝐢𝐧𝐠 𝐑𝐢𝐧𝐠】Our torque wrench 1/2 drive meets the high precision standard of ±3% and comes with a traceable serial certificate. You can use it with confidence! Moreover, its graduation ring is tightly locked, with smaller incremental values, ensuring precise and consistent torque output even after multiple uses. This reduces the hassle of frequent adjustments. It is undoubtedly an excellent tool for your work!
- 🔊【𝐋𝐨𝐮𝐝 𝐂𝐥𝐢𝐜𝐤 𝐒𝐨𝐮𝐧𝐝】This torque wrenches has been upgraded to have a louder "Click" sound. We conducted over 25,000 tests to ensure that each product produces a click sound volume of no less than 45dB when the torque value exceeds 34 lbf·ft. When you hear the distinct click sound, it indicates that the preset torque has been reached, signaling you to stop applying force. You no longer need to worry about damaging your mechanical components.
- 💯【𝐔𝐬𝐞𝐫-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲】Our torque wrench set features a 72-tooth dual-directional ratchet head, allowing for easy operation in both clockwise and counterclockwise directions. It is designed with an adjustable locking ring, making it effortless to adjust the preset torque value. Additionally, it includes a quick-release head design, allowing it to replace the wrench head accessories more easily!
- Includes 1-pc. 3/8 in. drive torque wrench; Storage case; Product manual with torque conversion chart
- Wrench emits a click that can be heard and felt when the preset value is reached
- Permanently marked, high-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet head drives in both directions and measures torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- Includes 1-pc. 1/4 in. drive micrometer torque wrench (20-200 in.-lb.) with storage case and product manual; 1-pc. 3/8 in. drive micrometer torque wrench (10-80 ft.-lb.) with storage case and product manual; 1-pc. 1/2 in. drive micrometer torque wrench (25-250 ft.-lb.) with storage case and product manual
- Wrenches emit a click that can be heard and felt when the preset value is reached
- Permanently marked, high-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet heads drive in both directions and measure torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- 【PRECISION】 - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate . Before shipping, we take 200 times calibration tests to make sure all wrenches performance well .
- 【DURABLE】 - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- 【 RELIABLE & SAFE】: When small torque wrench set torque value is reached, the wrench will emits slight click sound to remind you to stop applying force to prevent overtorque damage to your items.
- 【LONG-LASTING】 - Rust & corrosion protection with our unique and newly invented Chrome finish treatment.
- 【 DUAL-DIRECTION MEASURES & WIDE USE】: The paddle of the mini torque wrench head can adjust the direction of use at any time,so that the wrench can be used both clockwise and counterclockwise directions. More widely used for Installation equipment, Electrical engineering, bicycle/motorcycle maintenance, Product assembly.With a storage box and an instruction manual.
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-490 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Grand Design RV, LLC Submission Date : JUL 17, 2023 NHTSA Recall No. : 23V-490 Manufacturer Recall No. : 910039 Manufacturer Information : Manufacturer Name : Grand Design RV, LLC Address : 11333 County Road 2 Middlebury IN 46540 Company phone : (574) 825-8000 x2015 Population : Number of potentially involved : 6,270 Estimated percentage with defect : 5 % Vehicle Information : Vehicle 1 : 2021-2024 Grand Design RV Momentum & Solitude Vehicle Type : TRAILERS Body Style : Power Train : NR Descriptive Information : The population was established by production units equipped with 7k & 8k CURT by Lippert axles. Products not included in the recall are a different size axle or have corrected torque specification. There are 6,270 affected units. Production Dates : FEB 12, 2021 – JUN 22, 2023 VIN Range 1 : Begin : 573FM4531M1119127 End : 573FM4025P1124415 ✔ Not sequential VIN Range 2 : Begin : 573FM4224P1218797 End : 573FM4233R1220049 ✔ Not sequential VIN Range 3 : Begin : 573FS4320NAA10632 End : 573FS4324RAA16309 ✔ Not sequential VIN Range 4 : Begin : 573FM4635PBB00001 End : 573FM4127RBB01426 ✔ Not sequential Description of Defect : Description of the Defect : Lippert has determined the defect exists with a combination of U-bolt torque specification and dynamic load on the leaf spring. The leaf spring pack can fail under dynamic load. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : An insufficiently tightened U-bolt could allow the leaf spring to fail and the axle to slip out of position. An axle shifting during transit could increase the chance of injury or crash. Description of the Cause : Lippert U-bolt torque specifications did not provide adequate clamp load on the leaf springs to withstand normal dynamic load. Identification of Any Warning that can Occur : Visual inspection of the leaf spring will show shifting of the leaves within the spring stack. Wheel spacing may be different from roadside to curbside, and/or tire interference with body features may be noticed. Part 573 Safety Recall Report 23V-490 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Involved Components : Component Name 1 : CURT ABS 7000# Axle Assembly Component Description : AXLE ABS 7000# CURT 90 1/2″-74 1/2 BRONZE 30PT Component Part Number : 120311 Component Name 2 : CURT ABS 7000# 8 LUG Axle Assembly Component Description : AXLE CURT ABS 7000# 8 LUG OVERSLUNG UPGRADED TUBE/SPRINGS BRONZE BUSHING EZ LUBE 30SPT Component Part Number : 120333 Component Name 3 : CURT ABS 8000# Axle Assembly Component Description : AXLE ABS 8000# CURT 90 1/2-74 1/2 BRONZE Component Part Number : 120372 Component Name 4 : CURT 7000# Axle Assembly with disc brakes Component Description : AXLE 7000# W/DISC BRAKES Component Part Number : 120303 Component Name 5 : CURT 8000# Axle Assembly with disc brakes Component Description : AXLE 8000# W/DISC BRAKES CURT Component Part Number : 120304 Supplier Identification : Component Manufacturer Name : Lippert Components Address : Attn: Pamela VanderMel PO Box 2888 Elkhart Indiana 46515 Country : United States Part 573 Safety Recall Report 23V-490 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Chronology : • January 20, 2023 – Grand Design receive reports of two axle failures where the spring appeared to separate on the axle, allowing the axle to shift location. • March 14, 2023 – Grand Design notified Lippert Components (LCI) of additional complaints regarding failed leaf springs on Curt axles. Grand Design contracted third party for testing of tie plates and leaf springs. • March 17, 2023 – Grand Design met with LCI to discuss testing results. It was determined further testing was required. • April 13, 2023 – Grand Design was advised by LCI to increase U-bolt torque to 80 ft. lb. • May 25, 2023 – LCI recommended increasing end of line torque to 90 ft. lbs. • June 15, 2023 – Grand Design met with LCI to review test results and known field incidents on CURT axles. • July 7, 2023 – Received formal notification of Lippert recall 23E-050. • July 11, 2023 – Grand Design Product Safety Review Committee met and affirmed scope for impacted CURT axle springs. Grand Design is aware of 45 incidents starting in January 2023 to June 2023. Two of the incidents resulted in an accident. Grand Design is not aware of any injuries as a result of this condition. Description of Remedy : Description of Remedy Program : On affected vehicles, the dealer will verify the U-bolt torque is at 90 ft.lbs. Any damaged, non functioning components will be replaced at no cost to the customer. Owner’s that have paid to have this service performed will be reimbursed by Grand Design for any expenses incurred relating to this defect. How Remedy Component Differs from Recalled Component : Remedied components are verified with the correct U-bolt torque value of 90 ft. lb’s at final stage production. Identify How/When Recall Condition was Corrected in Production : The issue with U-bolt torque was remedied in production by adding an additional check of U-bolt torque in the final stage of production. Each Ubolt is verified to have the supplier recommended torque value of 90 ft. lbs. Recall Schedule : Description of Recall Schedule : Owners of affected vehicles will be notified by First Class mail that their vehicle is affected by the recall. In addition, we will post recall information electronically for consumer access. Dealers will be notified of the recall action (by First Class mail & electronically) and will be supplied with repair information and vehicle identification information. Planned Dealer Notification Date : AUG 11, 2023 – AUG 11, 2023 Planned Owner Notification Date : AUG 16, 2023 – AUG 16, 2023 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END