Hoist Rings Assembled Incorrectly – 2018-2019, 2021 Spartan Fire Gladiator & 2020 MetroStar Emergency Vehicles

“This site contains affiliate links for which OEMDTC may be compensated”

June 1, 2023 NHTSA CAMPAIGN NUMBER: 23V389000

Hoist Rings Assembled Incorrectly

Hinge pin separation from the hoist ring can result in hoist ring failure and increase the risk of injury.

 

NHTSA Campaign Number: 23V389

Manufacturer Spartan Fire, LLC

Components EQUIPMENT

Potential Number of Units Affected 5

 

Summary

Spartan Fire, LLC (Spartan Fire) is recalling certain 2018-2019, 2021 Gladiator and 2020 MetroStar emergency vehicles. The rope rescue anchor point (hoist ring) may have been improperly assembled, which can allow a hinge pin to separate from the ring.

 

Remedy

Dealers will inspect and replace the hoist rings, as necessary, free of charge. Owner notification letters are expected to be mailed July 17, 2023. Owners may contact Spartan Fire customer service at 1-517-543-640. Spartan Fire’s number for this recall is 23011.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

On May 12, 2023 – Spartan Fire received communication from the hoist ring distributor for awareness of a Crosby inspection notice of a potential issue with their hoist ring assembly.

May 16-17, 2023 – Spartan Fire Engineering was notified of the issue and an investigation was started.

May 24-25, 2023 – Spartan Fire created a PSR Team, identified a potential population, and completed a risk assessment.

On May 26, 2023 – Escalated the issue to REV Group Management and REV’s senior leadership approved a voluntary recall for this issue.

 


4 Affected Products

Vehicles

MAKE MODEL YEAR
SPARTAN FIRE GLADIATOR 2018-2019, 2021
SPARTAN FIRE METROSTAR 2020

 


2 Associated Documents

Recall Acknowledgement

RCAK-23V389-2737.pdf 645.261KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.14 KB]

 


Defect Notice 573 Report

RCLRPT-23V389-2554.PDF 213.729KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.72 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V389&docType=RCL

 


 

Bestseller No. 1
4pcs M12 x 18 0.5Ton-1Ton G80 Swivel Eye Bolt Alloy Steel Material 360° Rotation Hoist Ring Heavy Duty Large Carrying Capacity Eye Bolt Tensile Strength ob is 1080MPa
  • 4pcs M12 x 18, working load 0.5-1Ton
  • The bolt is made of alloy steel 42CrMo by precision forging, and the tensile strength ob is 1080MPa. High temperature resistance, high wear resistance and high mechanical properties.
  • The built-in ball bearing rotates 360° without vibration, uniform force and no torque. Smooth rotation, strong and durable.
  • Safety guarantee, high bearing capacity, large bearing capacity, good toughness, fatigue resistance, high efficiency.
  • 100% of each piece is verified by 2.5 times the working force, and 20,000 fatigue tests are sampled.
Bestseller No. 2
33614 Heavy Duty Swivel Hoist Ring, Alloy Steel w/ Black Oxide Finish, G Thread Size 5/8"-11, 4000 Lbs Working Load Limit, 5-19/64" Height, 1" Thread Length
  • Made of forged alloy steel with minimum tensile strength of 180000 psi
  • Black oxide finish for corrosion resistance
  • 5:1 Design factor
  • Safety engineered hoist rings are magnetic particle inspected in accordance with ASTM E 1444
  • 360 Degrees swivel, 180 degrees pivot under load
Bestseller No. 3
American Drill Bushing 33714 Heavy Duty Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 3/4"-10, 5000 lbs Working Load Limit, 5-19/64" Height, 1" Thread Length
  • Made of forged alloy steel with minimum tensile strength of 180000 psi
  • Black oxide finish for corrosion resistance
  • 5:1 Design factor
  • Safety engineered hoist rings are magnetic particle inspected in accordance with ASTM E 1444
  • 360 Degrees swivel, 180 degrees pivot under load
Bestseller No. 4
2pcs M8 x 13 0.3Ton-0.6Ton Swivel Eye Bolt Alloy Steel Material 360° Rotation Hoist Ring Heavy Duty Large Carrying Capacity Eye Bolt Tensile Strength ob is 1080MPa
  • 2pcs M8 x 13 0.3Ton-0.6Ton Swivel Eye Bolt
  • The bolt is made of alloy steel 42CrMo by precision forging, and the tensile strength ob is 1080MPa. High temperature resistance, high wear resistance and high mechanical properties.
  • Scope of use: Widely used in industry, logistics, construction, ports, bridges, machinery, coal mines, petroleum, stadiums and other industries.
  • Safety guarantee, high bearing capacity, large bearing capacity, good toughness, fatigue resistance, high efficiency.
  • 100% of each piece is verified by 2.5 times the working force, and 20,000 fatigue tests are sampled.
Bestseller No. 5
Bestseller No. 6
QWORK Chain Sling Ring, Oblong Master Link Hoist Ring for Lifting Rigging,17636 lbs, Grade 80, Red
  • Max Load Capacity: 8 Ton / 17636 lbs. Thickness: 7/8 in.
  • Material: This G80 Steel material has a solid construction that ensures long-term durability.
  • Usage: Suitable for electric power, trailers, port transportation, lifting, sling connection, metallurgy, port and other industries.
  • Package: Include Master Link and Two Oblong Rings.
  • Service: Enjoy a smooth & worry-free return service within a month!
Bestseller No. 7
4.7T Hoist Ring for Lifting Rigging Master Link Oblong Master Link Heavy Duty Chain Link Lifting Ring 3/4", 10000 lbs, Grade 80 Weldless
  • Material: Grade 80 Alloy Steel
  • Capacity: 4.7t (10000LBs ) Work Load limit
  • High Stength Due to the Weldless Design
  • Package Content:1 x Lifting Ring
  • Please make sure loading is under 4.7 ton in case of accidence and injury.
Bestseller No. 8
Bestseller No. 9
2Ton Oblong Master Link, Oval Oblong Mater Ring Lashing Ring,2400Lbs Lifting Ring Hoist Ring for Lifting
  • Capacity: 2 tons (4400 Lbs) Work Load Limit
  • Heavy-duty Material Master ring is made of G80 Alloy steel. And Processed with powder coating. It is resistant to wear and high temperature.
  • EASY TO USE - The Master ring is easy to connect with hook, chain ,rope by simply connect to a hammerlock .
  • Wide Application: It is perfect for various lifting and moving activities in Factories, Construction Sites, Mining, Ports, Building, etc. The heavy-duty chain sling is designed for cargo security towing and handling.
  • More Attention -When Attaching Safety Chains , Hammerlock or other equiments, please ,make sure do not overload.
Bestseller No. 10

Last update on 2024-04-22 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...