Instrument Panel May Fail to Display Information – 2020-2021 Jayco Melbourne & Melbourne Prestige Motorhomes

“This site contains affiliate links for which OEMDTC may be compensated”

June 1, 2023 NHTSA CAMPAIGN NUMBER: 23V390000

Instrument Panel May Fail to Display Information

A blank instrument panel will not show critical information, such as vehicle speed, fuel gauge, warning messages, and warning lights, increasing the risk of a crash.

 

NHTSA Campaign Number: 23V390

Manufacturer Jayco, Inc.

Components ELECTRICAL SYSTEM

Potential Number of Units Affected 62

 

Summary

Jayco, Inc. (Jayco) is recalling certain 2020-2021 Melbourne and Melbourne Prestige motorhomes. The instrument cluster may fail to display any information when the vehicle is started.

 

Remedy

Dealers will update the instrument cluster software on the affected vehicles, free of charge. Owner notification letters were mailed June 15, 2023. Owners may contact Jayco customer service at 1-800-283-8267. Jayco’s number for this recall is Daimler 23V-204.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


This is to notify you of an Initial Recall Campaign to update instrument cluster software on approximately 6,440 MY 2019-2022 Mercedes-Benz Sprinter vans. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers.  All affected VINs will be flagged “PENDING” in VMI and CANNOT BE SOLD until the recall has been remedied.

 

Issue

Mercedes-Benz AG (MBAG), the manufacturer of Mercedes-Benz Sprinter vans, has determined that on certain Sprinter (907 platform) vehicles, the instrument cluster might remain non-functional upon vehicle start up. In the rare circumstance the malfunction occurs, information such as the speedometer, the fuel gauge, indicator lamps and warning messages, as well as acoustic warnings would not be available. The issue would occur upon vehicle start up, and continue during its operations and subsequent ignition cycles. Should the vehicle be driven with the instrument cluster malfunction present, the risk of a crash cannot be ruled out

 


Chronology :

Please refer to Daimler’s chronology on 23V-204.

Jayco is not aware of any reports of accident or injury related to this condition.

MBAG is currently aware of 1 confirmed field report in the US received on February 11, 2022. MBAG is not aware of any reported crashes, injuries, or other party property damage related to this issue, worldwide.

April 5,2023 Jayco received an email notification from Mercedes Benz about their recall 23V-204 and that we had purchased units that are affected by the recall.

April 10, 2023 Jayco’s Warranty Incident Review Committee (WIRC) reviewed the incident and elevated it to CPAC. On April 19, 2023 The Corrective Preventive Action Committee (CPAC) decided to elevate the incident to the Safety Steering Committee (SSC). On May 23, 2023 SSC voted to proceed with a pass through chassis recall.

 


4 Affected Products

Vehicles

MAKE MODEL YEAR
JAYCO MELBOURNE 2020-2021
JAYCO MELBOURNE PRESTIGE 2020-2021

 


5 Associated Documents

Defect Notice 573 Report

RCLRPT-23V390-9223.PDF 215.877KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.82 KB]

 


Recall Acknowledgement

RCAK-23V390-8940.pdf 645.896KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.76 KB]

 


Remedy Instructions and TSB

RCRIT-23V390-5174.pdf 540.7KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [528.03 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-23V390-7461.pdf 171.675KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [167.65 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-23V390-0098.pdf 206.973KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [202.12 KB]

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V390&docType=RCL

 


 

Mercedes-Benz Reprogramming

J2534 Pass-Thru

CarDAQ-Plus - PassThru J2534 Vehicle Reflash Hardware Instrument Panel May Fail to Display Information - 2020-2021 Jayco Melbourne & Melbourne Prestige Motorhomes | small light
CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware Instrument Panel May Fail to Display Information - 2020-2021 Jayco Melbourne & Melbourne Prestige Motorhomes | small light
CarDAQ-Plus 2 Instrument Panel May Fail to Display Information - 2020-2021 Jayco Melbourne & Melbourne Prestige Motorhomes | small light
VSI J2534 ECU Reprogrammer Instrument Panel May Fail to Display Information - 2020-2021 Jayco Melbourne & Melbourne Prestige Motorhomes | small light
Autel (AULMF2534) MaxiFlash Pro Instrument Panel May Fail to Display Information - 2020-2021 Jayco Melbourne & Melbourne Prestige Motorhomes | small light

 

All information in regard to Mercedes-Benz J2534 compliant software is available free of charge and found under the MB Workshop Resources tab on the home page of www.startekinfo.com

J2534 complaint software for Mercedes-Benz vehicles is available for purchase from Mercedes-Benz USA.

In order to use the J2534 complaint software for Mercedes-Benz vehicles, the purchaser must furnish their own:

  • J2534 compliant interface box*1*

*Must be purchased from a third party company and are not available from Mercedes-Benz USA LLC.

*1* suggested listing of J2534 interface boxes is located within the J2534 Pass-Thru User’s Manual which is posted for view without cost under the MB Workshop Resources tab on the home page of www.startekinfo.com

 

Vehicle Coverage

J2534 complaint software for Mercedes-Benz vehicles has coverage for all required functions associated to reprogramming, initialization, and fault clearing of emission control modules (engine and transmission) fitted to vehicles 2004 Model Year and newer. Additionally all access and functionality required in regard the configuration via SCN Coding and/or CVN Coding is covered.

J2534 complaint software for Mercedes-Benz vehicles is delivered via DVD media which is delivered monthly for the license term of one year upon purchase.

  • All control unit software (reprogramming calibrations) is contained within J2534 DVD media.

 

Terms and conditions

J2534 complaint software for Mercedes-Benz vehicles is purchased in 1-year license increments. During that license term the user will receive an initial software package, license key, SCN/CVN Coding information/access as well as monthly updates via DVD media.

  • Additional updates of software after the 1st year can be purchased at additional cost, however are not required for the system to continue functioning.

For pricing and additional information via the internet, please refer to the information at the beginning of this section.

www.startekinfo.com

 


 

Bestseller No. 1
Autel MaxiFlash Elite VCI J2534 Pass-Thru ECU Programming Tool, Vehicle Communication Interface,Work with Autel MaxiSYS Elite II, Elite, MS908, MS908S Pro, MK908 Pro II, MS908CV, MK908P and PC
  • 【As a multi-protocol Pass-Thru vehicle interface】MaxiFlash Elite is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.
  • 【MaxiFlash Elite is an accessory tool for MK908P, MS908S Pro】Autel MaxiSys Elite to program ECUs on specific for BMW and for Benz vehicles, in case you lost the J-2534 programmer. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. The functions are NOT universally compatible. Please send VIN number to 🚘jmxd2022@outlook.com📧🚘 to check compatibility before your order. If need any supports, Please contact us.
  • 【Wireless with advanced networking functions】Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable. Autel MaxiFlash Elite is compatiable with MaxiSYS MS908S, MaxiSYS MS908S Pro , MaxiSYS MS908CV, MaxiCOM MK908, MaxiCOM MK908 Pro, MaxiSYS Elite, MaxiSYS Elite II and Personal Computer
  • 【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
  • 【Supports simultaneous communication Definition in J2534-1】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed.Rugged aluminum case with non-slip rubber end caps, capable of withstanding harsh environment.
Bestseller No. 2
CarDAQ-Plus 3 All Makes J2534 Reprogramming Tool
  • ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
  • J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
  • TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
  • J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
  • FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
Bestseller No. 3
Mongoose-Plus J2534 OEM Vehicle Interface Cable - GM OEM Reprogramming and Diagnostics
  • Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, Subaru, & VW/Audi.
  • Supports Current GM Vehicles: Now includes CAN-FD, DoIP (Diagnostics over Internet Protocol - as defined in J2534-2) and support for J2534 version 5.0. This is the tool that GM dealerships use for diagnostics and reprogramming.
  • NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
  • Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
  • Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
Bestseller No. 4
Latest Version ECUs Programmer SM2Pro J2534VCI Read Write 67IN1 Dongle Suiatble for Efficient ECUs Programming Durable Diagnostic Tool Plastic ECUs Programmer Vehicle Repair Tool Engine Diagnostic
  • Stay up-to-date with thelatest firmware and support of the SM2Pro J2534VCI ECUs programmer, ensuring reliable perform and optimalresults.
  • The SM2Pro J2534VCI ECUs programmer is a trustedtool for professional technicians, offering comprehensive functionality and easy integration into your workflows.
  • The SM2Pro J2534VCI ECUs programmer offersadvanced functionality for efficient and precise ECUs programming.
  • With its 67IN1 without dongle & OBDcompatibility, the SM2Pro J2534VCI ECUs programmer provides a versatilesolution for read and write operations.
  • Experienceseamless ECUs programming with the SM2Pro J2534VCI, designed to streamlines the read and write processes for enhanced efficiency.
Bestseller No. 5
TOPDON RLink Lite J2534 Pass-Thru Programmer, Enhanced VCI, Supports DoIP/CAN/CAN FD/D-PDU/J2534/RP1210, OEM Reprogramming and Diagnostics
  • 【ALL-IN-1 REPROGRAMMING TOOL】With its exceptional compatibility, TOPDON RLink Lite J2534 pass-thru programmer and enhanced VCI seamlessly conducts original equipment-level diagnostics, programming, and coding jobs, achieving OE-level diagnostics across various vehicle models with a single device. Note: TOPDON RLink Lite is Window-only, not compatible with Mac.
  • J2534 REPROGRAMMING TOOL】The RLink Lite functions as a J2534 pass-thru programmer to achieve OEM programming and diagnostics. Compliant with three major automotive industry standards D-PDU/J2534/RP1210, and latest DoIP/CAN/CAN FD, the RLink Lite ensures extensive vehicle coverage and speedy diagnostics.
  • 【ENHANCED VCI】The TOPDON RLink Lite operates as a versatile VCI box, enabling you to achieve advanced diagnostic, programming, and coding functionalities when paired with OE software. Moreover, TOPDON's DMS Driver Management System helps you easily master the OE software by offering drivers for various brands.
  • 【FASTER & SMOOTHER】Powered by a 1.8 GHz quad-core processor, enjoy swift response and seamless operation. The RLink Lite Enhanced VCI runs on Android 11.0 for advanced features and top-notch security. With 2GB RAM and 32GB ROM, storage is ample for smooth performance and quick access to data and apps.
  • 【PACKAGE+J2534 SUPPORT】The package comprises the RLink Lite main unit, a 2m OBDII diagnostic cable, a 5m Ethernet cable, a 1.5m USB 2.0 data cable, a 12V DC power adapter, and a quick start guide. Enjoy complimentary technical support from our dedicated TOPDON team for any J2534-related inquiries or concerns throughout the lifespan of your device.
Bestseller No. 6
Autel MaxiFlash VCI Kit, Bluetooth Vehicle Communication Interface, ECU Programming, SAE J2534 D-PDU RP1210 CAN FD 4 CAN Channels ISO22900, Work with MaxiSYS MS909 MS909EV MS909CV MaxiCOM Ultra Lite
  • 【Autel MaxiFlash VCI】👉The MaxiFlash VCI is a bluetooth-enabled vehicle communication interface (VCI) and a J2534-1 and J2534-2 compliant pass-thru programming device. Compatible with the MaxiSYS MS909 advanced diagnostics tablet. The MaxiFlash VCI supports CAN FD, 4 CAN Channels, D-PDU, ISO22900-1 & ISO 22900-2 protocols and is RP1210 compliant.
  • 【Programming Compatibility】👉The MaxiFlash VCI is a D-PDU, SAE J2534 & RP1210 compliant PassThru programming interface. Using the updated OEM software, it is capable of replacing the existing software/firmware in the Electronic Control Units (ECU), programming new ECUs, and fixing software-controlled drivability issues and emission issues.
  • 【Communication Compatibility】👉The MaxiFlash VCI supports Bluetooth (BT), Wi-Fi, and USB communications. It can transmit vehicle data to the tablet with or without a cable connection. In open areas, the working range of the transmitter through Bluetooth communication is up to 328 feet (about 100 m). The working range of 5G Wi-Fi is up to 164 feet (50 m). If the signal is lost due to being taken out of range, communication will be restored once the tablet is within range.
  • 👉The MaxiFlash VCI can be used with a Windows computer with applicable OE subscription for vehicle module programming and when connected to the MaxiSYS MS909 tablet for BMW and for Mercedes (compatible) vehicle module programming.
  • 👉Includes One-Year Limited Warranty. This VCI Kit also includes an Autel Main Cable V2.0, USB 2.0 cable, and AC/DC adapter. 🚦If you have any other question, feel free to contact 📧 mbdh2022@outlook. com 📧

Last update on 2024-06-18 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...