“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18E033
Manufacturer LuK GmbH & Co. KG
Components HYBRID PROPULSION SYSTEM
Potential Number of Units Affected 27,029
Clutch Actuator Oil Leak may cause Fire
An electrical short can increase the risk of a fire.
Summary
LuK GmbH & Co. KG (LuK) has submitted a Defect Information Report based upon decisions made by Kia Motors America and Hyundai Motor America to conduct recalls (numbers 18V257 and 18V260 respectively) to inspect and replace the Hydraulic Clutch Actuator (HCA) caps and assembly that can allow oil to accumulate in the cap area, possibly resulting in an electrical short.
Remedy
LuK is working with the affected vehicle manufacturers. Dealers for those manufacturers will inspect the HCA caps for leaked oil, and replace the HCA assembly if necessary, free of charge. Kia owners may contact Kia customer service at 1-800-333-4542. Kia’s number for this recall is SC163. Hyundai owners may contact Hyundai customer service at 1-855-371-9460. Hyundai’s number for this recall is 176.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Acknowledgement
June 25, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18E033-9734.pdf
- Provides an extra margin of safety in extreme braking conditions
- Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
- Excellent for ABS, disc and drum brake systems
- Delivers braking power when needed by avoiding a spongy pedal
- Both wet and dry boiling points exceed the minimum government standards
- High quality blend of polyethylene glycol ethers and additives
- Compatible with all brake system rubber components and other brake fluids
- Prevents seal hardening or softening
- Protects against rust and corrosion
- Provides excellent lubricity
- High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1
- Extended Service Interval (ESI): Lasts 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5. 1
- Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards
- Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s
- Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years.
- Premium DOT 3 Brake Fluid has a minimum boiling point of 450°F
- Meets and exceeds DOT 3 and all other Federal and SAE specifications and standards for motor vehicle brake fluids
- Mixes with all DOT 3 approved brake fluids
- Designed for use in disc, drum and ABS brake systems
- Synthetic quality brake fluid
- Contains special ingredients to guard against vapor lock and moisture absorption
- Exceeds requirements for both DOT 3 and DOT 4 brake fluids
- Specially formulated for DOT 4 brake fluid applications
- Designed for use in disc, drum and ABS brake systems
- Premium brake and hydraulic clutch fluid that protects internal components from corrosion under normal use
- High boiling point to minimize brake fluid boiling and vapor lock
- Excellent low temperature capability and stability when used where lower cold viscosities are required
- Excellent low temperature capability and stability when used where lower cold viscosities are required
- The 336⁰F wet boil point and 521⁰F dry boil point exceeds common characteristics for DOT 4 brake fluids
- Provides corrosion protection in brake components
- Matches needs of all DOT 4 manufacturer recommendations
- Compatible with all DOT 3 and DOT 4 applications
- Minimal decrease of boiling point due to excellent water locking properties
- Non-foaming when filling and bleeding the brake system
- Excellent corrosion protection due to selected additives
- High safety tolerance against steam bubbles
- Makes brake fluid changing intervals of up to 3 years possible
- 2 Pack
- Dry boiling point 594 degrees F
- Motul 600 brake fluid is 100 percent synthetic and has an extremely high boiling poin
- Helping to prevent vapor lock and brake fade during hard use
- This brake fluid exceeds both DOT 3 and DOT 4 specifications
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.