230516REV – Tow Hitch May Separate – 2020-2024 Fleetwood Bounder, Holiday Rambler Vacationer & 2020-2023 Fleetwood Southwind Motorhomes

“This site contains affiliate links for which OEMDTC may be compensated”

May 18, 2023 NHTSA CAMPAIGN NUMBER: 23V351000

Tow Hitch May Separate

A tow vehicle that separates from the motorhome can become a road hazard, increasing the risk of a crash.

 

NHTSA Campaign Number: 23V351

Manufacturer REV Recreation Group

Components TRAILER HITCHES

Potential Number of Units Affected 1,186

 

Summary

REV Recreation Group (REV) is recalling certain 2020-2024 Fleetwood Bounder, Holiday Rambler Vacationer and 2020-2023 Fleetwood Southwind motorhomes. The tow hitch may become damaged due to stress or vehicle overloading, which can cause the tow vehicle to separate from the motorhome.

 

Remedy

Dealers will inspect and replace the hitch, free of charge. Owner notification letters are expected to be mailed July 15, 2023. Owners may contact REV customer service at 1-800-509-3417. REV’s number for this recall is 230516REV.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

  • In May of 2023, REV Recreation Group notified Lippert that a risk to safety may occur on certain Lippert manufactured hitches and that REV Recreation Group would immediately conduct a recall out of an abundance of caution on behalf of the hitch supplier.
  • In July 2022, REV Recreation Group received notification that a Lippert manufactured hitch had welds that broke while in use. A review of warranty history revealed no other reported failures of this part as of this time.
  • In November 2022, REV Recreation Group received notice of a second reported failure of this hitch. The parts were returned to Lippert, the hitch manufacturer and it was determined that in each case involving a reported hitch failure, an approximate 6” customer added drop hitch was being utilized to facilitate flat towing of an SUV.
  • December 2022, REV Recreation Group conducted a follow up meeting with Lippert and the assessment at that point indicated the failures were potentially related to use of aftermarket equipment contacting the ground during use or by stress added by leverage by consumer added drop hitches.
  • Dec 2022 and ongoing, REV Recreation Group and Lippert started an investigation and reviewed testing data to determine the effect of consumers adding an aftermarket drop hitch.
  • April 3, 2023 – A customer with REV Recreation Group gas motor home reported their Lippert hitch welds had a failure. Field data now shows that there are a total of 5 similar reports with the specific subject part number. Further evaluations were conducted and remain underway.

REV leadership and engineers met and discussed the specifications of the units with the failure and concluded that their safety committees should consider a campaign to replace the specific hitch with a redesigned, more robust part in the interest of customer safety.

 


14 Affected Products

Vehicles

MAKE MODEL YEAR
FLEETWOOD BOUNDER 2020-2024
FLEETWOOD SOUTHWIND 2020-2023
HOLIDAY RAMBLER VACATIONER 2020-2024

 


2 Associated Documents

Recall Acknowledgement

RCAK-23V351-8508.pdf 645.874KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.74 KB]

 


Defect Notice 573 Report

RCLRPT-23V351-3281.PDF 216.193KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [211.13 KB]

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V351&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
Towever 83803 Towever Trailer Hitch Receiver, RV bumper Hitch Receiver 2 Inch for 4 x 4 Inches Square RV bumper Rack Trailer Towing Purpose
  • The RV Camper bumper hitch adapter 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.
  • Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.
  • The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.
  • 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside.
  • Heavy duty constructed and black powder coated for corrosion resistance.ATV hitch adapter is hitch extender 2 inch, good rv camper accessories for travel trailers.
Bestseller No. 2
CURT 13703 Camper Adjustable Trailer Hitch RV Towing, 2-Inch Receiver, 3,500 lbs., Fits Frames up to 72 Inches Wide
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer
  • EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 72 inches wide
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage
Bestseller No. 3
Ohuhu Bolt-on RV Bumper Hitch Receiver Adapter Fits 4-4.5" Beam, 2" Receiver 200Lbs Tongue Weight Capacity, Travel Trailer Rear Bumper with Hitch Pin & Hitch Cover, Fit for Camper Bike Racks Cargo Car
  • Use Only For 2"*2" Square Tubes: Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation. (Please check the bumper size carefully before purchasing.)
  • 200lbs Tongue Weight Capacity: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on. (Note: It is NOT intended for towing purposes.)
  • Quick, Easy Installation: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you are good to go. (It can be Mounted Upside Down.)
  • Sturdy & Durable: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
  • Accessories Included: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
Bestseller No. 4
KUAFU Adjustable Trailer Hitch RV Trailers 5th Wheel 2 Inch Towing Hitch Receiver Powder Coated Steel Black
  • Fitment: This trailer hitch is great for tow fishing boat trailers, popup campers, trailers and bikes. Widely used in daily life.
  • Function: 2" hitch for travel trailers and fifth wheels. It is mounted on the rear of the trailer and is used to tow the vehicle when facing trouble. Class I hitch bolted onto frame, Max tongue weight : 200 pounds. Class II hitch welded to frame, tongue weight: 300-350 pounds.
  • Feature: Material: Steel; Color: Black; Finish:Powder Coated. Durable, strong strength and impact resistance meet your towing needs.
  • Package Include: 1pc of trailer hitch. Mounting hardware and instruction are included.
  • Installation: Install by screws. Professional installation is always highly recommended.
Bestseller No. 5
Ohuhu RV Bumper Hitch 2" Receiver Adapter with Hitch Pin & Hitch Cover, Openning 3500 LBS Capacity Fits 4" x 4" Bumper Trailer Towing Cargo Carrier Bike Racks
  • Quick, Easy Installation: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you are good to go.
  • Sturdy & Durable: Pulls its weight, every time! Tough and durable for the long haul, this hitch receiver is constructed of premium steel. With a dual coating finish of E-coat and Black Powder Coating, this bumper hitch is protected from rust and corrosion. Get the job done right with the Ohuhu Trailer Receiver!
  • Use Only For 2"*2" Square Tubes: Designed specifically for 4"*4" bumpers, this receiver is made for use with 2"*2" square tubes. It can allow for a wide variety of towing options.
  • 350lbs Tongue Weight Capacity: This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • Accessories Included: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
Bestseller No. 6
CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools
SaleBestseller No. 7
Towever 83801 Towever RV Bumper Hitch Receiver 2 inches Adapter for 4-4.5 inches Travel Trailer Rear Bumper
  • This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )
  • For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper
Bestseller No. 8
Stromberg Carlson CC-300 Product Accessory Hitch Adjustable, Black
  • 2" hitch for travel trailers and fifth wheels
  • Bolt (Class I) or weld (Class II) onto the frame
  • For use with bike racks, cargo carriers and other accessories
  • Not to be used pulling cars or boats if bolted in Class I configuration
  • Mounts to the side wall of frame or horizontal wall of C-channel or I-beam with angled hardware
Bestseller No. 9
HITOWMFG 2 inch RV Bumper Mount Hitch Receiver for 4x4 inch Square RV Bumper, 3500 LBS, Fit for Cargo Carrier Bike Racks
  • 【 STANDARD FIT 】 Fits standard 4" x 4" RV or travel trailer bumper/beam, use for both downside and upside, the bolts Need to be secure tightly around the travel
  • 【 2 INCH RECEIVER FIT 】Accept hitch mount with 2" shank such as bike racks, RV tire carriers, cargo carriers or other accessories
  • 【 CAPACITY 】 3500lbs. Gross trailer weight, 350lbs. Max tongue weight, Do NOT use for RV level Trailer towing Purpose
  • 【 WEATHER RESISTANT 】Finished in black power coating provide durable and strong conditions, resist dust and corrosion, adds extra durability, can be used with an anti-rattle kit
  • 【 POWERFUL& DURABLE BUILD 】 Heavy duty steel via robotically welded for superior strength provide excellent mounting facility, high quality hardware fittings, all make this adjustable trailer hitch more durable
Bestseller No. 10
GESEXI Rv Bumper Hitch Receiver 2’’ for Mounting Bike Racks & Cargo Travel.…
  • 【 Size and Model 】 The bolt on receiver hitch is suitable for 2x2 square pipes, with a maximum connection size of 4.5 '' high x 4.25 '' deep.
  • 【 High quality material selection 】 The rv bumper hitch receiver 2 inch uses carbon steel as the main raw material, which is corrosion-resistant, scratch resistant, and trustworthy.
  • 【 Widely used 】 Bolt fixed design, easy installation and disassembly, trailer hitch receiver can meet different usage scenarios.
  • 【Installation device】 It is not used for traction and is suitable for fixing Bicycle frame, cargo rack and tire rack. The hitch receiver tube belongs to trailer accessories.
  • 【 Carrying 200 pounds 】 Extremely strong load-bearing capacity, as long as there is an hitch receiver, you can install any bracket on your bumper.

Last update on 2024-06-13 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...