“This site contains affiliate links for which OEMDTC may be compensated” |
FIELD CAMPAIGN
SERVICE BULLETIN #
SVC2020-096
DATE:
16 July 2020
PRODUCT SAFETY RECALL
FIRST NOTICE
Subject:
1. IK01: Order one of these kit versions which includes English Supplemental Operator’s and Maintenance Manual for machines located in the United States, Canada (except for Quebec), Australia, New Zealand, and other English-speaking global regions.
2. IK02: Order one of these kit versions which includes English + translated Supplemental Operator’s and Maintenance Manuals for machines located in other global regions.
Background:
Dealers were previously notified on Service Bulletin SVC2020-052Rev1, SVC2020-056 and SVC2020-057 about a supplier wheel safety defect.
These Service Bulletins provided instructions for:
1. Destruction of dealer inventory for affected part numbers:
2. Install temporary solution (Assembly PN 163769457) on units that could not maintain torque and/or tire pressure.
3. Owner notifications to inspect each wheel to determine if supplier wheels were installed and to notify Vermeer Corporation of the inspection results.
POSSIBLE LOSS OF WHEEL AND RISK OF CRASH
Specific wheels (steel rim) with bolt pattern 8 on 6½ inch (165 mm) circle to be used with 5/8” studs provided by a supplier:
- can develop possible cracks causing the tire to lose air pressure.
DEATH OR SERIOUS INJURY POSSIBLE
Both conditions may increase the risk of wheel loss and the risk of a crash. Death or serious injury is possible. Property damage may also occur.
Solution:
IMMEDIATE MACHINE MODIFICATIONS REQUIRED
IK00-3942 has been created to provide the necessary parts and instructions to replace the wheel and tire assembly, install a new safety sign (shown at right), install a new wheel/tire specification placard decal and provide a Supplemental Operator’s and Maintenance Manual.
Please be reminded that it is a violation of Federal law for you to sell or lease the machines covered by this notification until this recall has been performed on these machines. Substantial civil penalties apply to violations of this law.
1. Kit versions descriptions and instructions:
a. IK01-3942: Includes wheels, tires, safety sign, wheel/tire specification placard decal, English supplemental manual
b. IK02-3942: Includes wheels, tires, safety sign, wheel/tire specification placard decal, English + translated supplemental manual
SEOCONTENT-START
Vermeer and the Vermeer logo are trademarks of Vermeer Manufacturing Company in the U.S and/or other
countries. Vermeer Corporation. All Rights Reserved.
Page 1 of 12
Vermeer Corporation
Environmental
Pella, IA 50219 USA
FIELD CAMPAIGN
SERVICE BULLETIN #
SVC2020-096
DATE: 16 July 2020
CAMPAIGN
TYPE:
Mandatory-Product Safety
DEALER INSTALLATION ONLY
CAMPAIGN
CATEGORY: Kit and Bulletin
Subject:
BC1800XL Wheel and
Tire Assembly
Replacement Kit
(IK00-3942)
Field remedy now available.
1. IK01: Order one of these kit versions which includes English Supplemental
Operator’s and Maintenance Manual for machines located in the United States,
Canada (except for Quebec), Australia, New Zealand, and other English-speaking
global regions.
2. IK02: Order one of these kit versions which includes English + translated
Supplemental Operator’s and Maintenance Manuals for machines located in other
global regions.
Additional details regarding kit versions and parts included are shown below.
MACHINE /
ATTACHMENT
MODEL (S) :
Serial Numbers
Included Excluded Kit Version
BC1800XL
2381, 2382, 2409, 2801, 2839,
2842, 2978, 3217 – 3219
(Only Units with JSK01472)
All units without
JSK01472 installed
IK01: Solid Steel Wheels
8 on 6½”, 5/8” studs; Heavy
Duty Tires 235/75R17.5
LRJ 18 ply; safety sign; tire
specification placard; and
English supplemental
manual
BC1800XL
NONE
(Only Units with JSK01472)
All units without
JSK01472 installed.
2381, 2382, 2409,
2801, 2839, 2842,
2978, 3217 – 3219
IK02: Solid Steel Wheels
8 on 6½”, 5/8” studs; Heavy
Duty Tires 235/75R17.5
LRJ 18 ply; safety sign; tire
specification placard; and
English + Translated
Supplemental Manual
PRODUCT
SAFETY
RECALL
FIRST NOTICE
Page 2 of 12
SVC2020-096 16 July 2020
Background: Dealers were previously notified on Service Bulletin SVC2020-052Rev1, SVC2020-
056 and SVC2020-057 about a supplier wheel safety defect.
Models Tire/Wheel Assembly Part Number Wheel Part Number
BC1800XL with
JSK01472 163647430 163647428
Defective Supplier Wheel
Improper Lug Nut Seat
and Potential Cracks
Identified by continuously raised lug nut surface
Properly Manufactured Wheel
Correct Lug Nut Seat
Identified by raised surface only around lug
nut location
These Service Bulletins provided instructions for:
1. Destruction of dealer inventory for affected part numbers:
2. Install temporary solution (Assembly PN 163769457) on units that could not
maintain torque and/or tire pressure.
3. Owner notifications to inspect each wheel to determine if supplier wheels were
installed and to notify Vermeer Corporation of the inspection results.
POSSIBLE LOSS OF WHEEL AND RISK OF CRASH
Specific wheels (steel rim) with bolt pattern 8 on 6½ inch (165 mm) circle to be used
with 5/8” studs provided by a supplier:
have an incorrect lug nut contact area causing wheel lug nuts to loosen; and/or
can develop possible cracks causing the tire to lose air pressure.
DEATH OR SERIOUS INJURY POSSIBLE
Both conditions may increase the risk of wheel loss and the risk of a crash. Death or
serious injury is possible. Property damage may also occur.
Page 3 of 12
SVC2020-096 16 July 2020
Solution: IMMEDIATE MACHINE MODIFICATIONS
REQUIRED
IK00-3942 has been created to provide the
necessary parts and instructions to replace the
wheel and tire assembly, install a new safety
sign (shown at right), install a new wheel/tire
specification placard decal and provide a
Supplemental Operator’s and Maintenance
Manual.
Please be reminded that it is a violation of
Federal law for you to sell or lease the
machines covered by this notification until this
recall has been performed on these machines.
Substantial civil penalties apply to violations of
this law.
1. Kit versions descriptions and instructions:
a. IK01-3942: Includes wheels, tires, safety sign, wheel/tire specification placard
decal, English supplemental manual
b. IK02-3942: Includes wheels, tires, safety sign, wheel/tire specification placard
decal, English + translated supplemental manual
Wheel: Solid Steel 8 on 6½ inch; 5/8” studs
Tire: Heavy duty, 235/75R17.5 LRJ (18 ply)
Wheel/lug nut: 5/8-inch 90-degree cone w/ clamp rings
Tire load rating: 4410 lb (2000 kg) at 85 psi (590 kPa)
Destroy wheel and tires. When you remove the supplier defective steel rim/wheels,
these wheels can never be used or sold for any purpose. The wheels MUST be
destroyed:
o Remove the tire from the steel rim/wheel or deflate the tire.
o Torch cut the wheel(s) across the lug nut area.
o Take photo(s) of the destroyed wheel(s) and attach to campaign warranty
claim.
o Discard the lug nuts so they can never be used or sold for any purpose.
o The removed used tires may be retained in your used tire inventory or
disposed of. The cost of tire removal and disposal is included in the labor
hours.
DEALER PARTICIPATION
REVIEW REPORT, ORDER KITS, CONTACT CUSTOMERS
1. Reports will be emailed during the week of July 16, 2020, to dealerships shown
in our records which have units in their territory affected by this Alert. Please
review the report for accuracy, including owner and/or address changes.
If the information contained in the report is NOT correct, please notify the Product
Safety Department on or before July 29, 2020 at:
Telephone: 641-621-7060
Fax: 641-621-8562
Email: productsafety@vermeer.com
2. Dealerships Order Kits by entering the order into iParts/EZParts.
.A.WARNING ~ ~I
·—~
~
~i
~:c::.”:-~
l..u.,,,g,….-_-_O–f_-
X ✓ X 11,, ✓ $11
9 (6j ~ ~
=-:..~.::-~
.,. ,. . \~*· c:enooc:u-.~ U..o,jy!l&-18,w, …. UM°”‘/~-
~or….,.,..irt,ry. ,weona1._, a-lOl’Q … …,iy,
~’ ~ ~ )
W….ordamag,ld._…., ==-~— __ –.,.-…….,…,._ =-~or
Dt: ,_. -. — @~6L5I-
-· ~ –t
SelOOld … __ ~ _,.,.~NOl….- ~ol._n __ _.,..””°””……,__.. –pn,Mdor, …….. ·– –~'””VL
w t$J ✓ AI.WAYIUlll”–.,,INd~ ~-…_ _ _…. ___
Page 4 of 12
SVC2020-096 16 July 2020
Each dealership should determine the quantity of Kits to order initially depending
upon the number of units that may be available for immediate upgrade. Do not
order more Kits than needed for immediate installation.
3. Translated Manuals. For those dealers in global locations where English is not
the primary/official language, iParts/EZParts will require the Model and VIN be
entered at time of order to enable a translated Supplement Manual to be provided
in the official/primary language. If the translated Supplemental Manual is available
in the language required at time of order, the translated manual will be shipped
with IK02 from the Parts Distribution Center. If the translated Supplemental
Manual is not yet available, the translated manual will be sent from Product
Safety department when it becomes available referencing the Sales Order
number of IK02, Model and VIN.
4. Contact your affected customer(s) to schedule a mutually acceptable time to
upgrade their machine. Note: Letters will be sent to the customer(s) on or about
July 30, 2020. Also refer to Owner Notification section below.
If you have any questions concerning the installation of IK00-3942, please contact the
Environmental Service Department.
REIMBURSEMENT
Upon completion of each Kit installation, a campaign Warranty Claim must be
submitted to the Corporate Warranty Department for reimbursement of the cost of the
parts and labor to install the Kit. The campaign Warranty Claim:
1. Must include photos of destroyed wheels (IK01, IK02 only).
2. Must include a copy of the Work Order if travel is requested.
Labor hours to install IK01 or IK02: 4.0 hours. Note: Tire disposal is included in the
labor hours. No additional reimbursement will be paid.
If dealer assists owner with wheel inspection, dealer will be reimbursed 1.0 hour
labor. Dealer must submit standard warranty claim with wheel photos and inspection
form attached referencing IK003942 in causal part number field.
If a customer submits inspection form directly to Vermeer Corporation, the dealer will
not also be paid for a second inspection.
Note: Future notices to dealers and owners are dependent upon the receipt of
Warranty Claims.
OWNER NOTIFICATION
Sample Letters: Included at the end of this Bulletin are sample letters which will be
sent by Vermeer Corporation directly to the Owners on or about July 30, 2020, via
USPS certified/registered mail. Please note there are two sample letters:
Owners who responded to interim mailing that wheels were defective or who
had the temporary wheel solution installed.
Owners who did not respond to the interim mailing.
Owner registrations indicate no translations are required for this campaign. The owner
letter will be available in English only.
Page 5 of 12
SVC2020-096 16 July 2020
This owner notification/letter instructs the owner to contact their local dealership to
arrange for a time to have the Kit installed. After receiving IK00-3942 from the Parts
Center, you must contact your affected customer(s) immediately and schedule a
mutually acceptable time to upgrade their machine.
We regret any inconvenience these corrective measures may cause you. This
required work is for the safety of the crew, the towing vehicle occupants and others
traveling the public roadways. We hope you agree the safety benefits surpass the
inconvenience.
PRODUCT SAFETY DEPARTMENT
Attachment:
IK00-3942 Kit Instructions
Completion Schedule:
Product Safety Alert: Install immediately
90 days from MM/DD/YYYY
180 days from MM/DD/YYYY
1 year from MM/DD/YYYY
Only Units within Standard Limited
Warranty Period
N/A
Reimbursement:
Product Safety Alert:
Work Completion Certificate Required
All Units Listed Above
Parts Labor Paid (Labor Code: SB20)
Only Units within Standard Limited Warranty
Period
No Reimbursement
Internal Reference:
TREAD Act Code
(Choose one or
more codes
applicable)
— Not Applicable 12 Exterior lighting
02 Suspension 16 Structure
03 Service brake system, hydraulic 17 Latch
04 Service brake system, air 19 Tires
05 Parking brake 20 Wheels
11 Electrical 21 Trailer hitch
~
□
□
□
□
□
□ □
□ □
□ □
□ □
□ ~
□ □
Page 6 of 12
SVC2020-096 16 July 2020
NHTSA SAFETY RECALL NUMBER 20V-085
VIA USPS CERTIFIED/REGISTERED MAIL
July 30, 2020
VIA USPS CERTIFIED/REGISTERED MAIL
Dear «MODEL» Owner:
This notice is sent to you in accordance with the requirements of the U.S. National Traffic and Motor Vehicle
Safety Act.
In March 2020, Vermeer decided that a defect, that relates to motor vehicle safety, existed in certain model
year 2016–2020 Vermeer «MODEL» brush chippers. At that time, Vermeer Corporation sent owners an interim
notice asking owners to inspect the wheels. Thank you for returning the inspection form and/or contacting
your dealer for the temporary wheel solution. The final field campaign remedy is now available.
What is the issue?
Certain brush chippers with specific wheels (steel rim) with bolt pattern 8 on 6½ inch (165 mm) circle to be
used with 5/8-inch studs provided by a supplier:
have an incorrect lug nut contact area causing the wheel lug nuts to loosen; and/or
can develop possible cracks causing the tire to lose air pressure.
Both conditions may increase the risk of wheel loss and the risk of a crash. Death or serious injury is
possible. Property damage may also occur.
IMMEDIATE MACHINE MODIFICATIONS REQUIRED
Sample Owner
Letter #1 – Temporary
wheel solution installed,
or Inspection indicated
defective wheels
IMPORTANT
SAFETY
RECALL
First Notice
BC1800XL Wheel and Tire
Assembly Replacement Kit
(IK00-3942)
Field campaign remedy is now available.
Model: «Model»
This notice applies to your vehicle,
Serial No: «VIN»
Sa ~ ()wner
, Te1nporary
install
I ction indicate
tive Defective Supplier Wheel
Improper Lug Nut Seat
and Potential Cracks
Properly Manufactured Wheel
Correct Lug Nut Seat
Identified by raised surface only around lug nut location
Page 7 of 12
SVC2020-096 16 July 2020
IK00-3942 has been created to provide the necessary parts and instructions to replace the wheel and tire
assembly, install a new safety sign (shown below), and provide a Supplemental Operator’s and
Maintenance Manual. This kit must be installed as soon as possible.
If your dealer did not install the temporary wheel solution, prior to having
this field remedy kit installed, please continue to verify the torque of
each lug nut [210 ft-lb (285 Nm)] and tire pressure [80 psi (550 kPa)] as
part of your pre-trip inspection every day or at a minimum every 150
miles (250 km) until IK00-3942: Wheel and Tire Assembly Replacement
Kit is installed by your dealer.
Wheels and tires included in this field remedy kit are:
Wheel: Solid Steel 8 on 6½ inch; 5/8” studs
Tire: Heavy duty, 235/75R17.5 LRJ (18 ply)
Wheel/lug nut: 5/8-inch 90-degree cone w/ clamp rings
Tire load rating: 4410 lb (2000 kg) at 85 psi (590 kPa)
Please contact your authorized, independent Vermeer dealer immediately to arrange a mutually
acceptable time and location to install IK00-3942 at no cost to you for labor or materials. The installation of
this kit is estimated at 4.0 hours of labor. If the Vermeer dealer travels to the unit to install the kit, costs may
be incurred by the owner.
You must have your machine upgraded for these safety features.
Contact your local Vermeer Dealer: «Service_Dealer_Name»
«Serv_Dealer_Add1» «Serv_Dealer_Add2»
«Serv_Dealer_City» «Serv_Dealer_St» «Serv_Dealer_Zip»
«SERV_DEALER_COUNTRY»
Telephone: «Serv_Dealer_Phone»
According to our records, you currently own a Vermeer «MODEL» brush chipper. The Model and Serial
Number of the «MODEL» is shown at the top right of this letter. If you no longer own this unit, please notify the
Product Safety Department at:
Toll Free: 800-829-0051, extension 7060
Telephone: 641-621-7060
E-mail: productsafety@vermeer.com
If possible, please provide the name and address of the new owner.
We regret any inconvenience these corrective measures may cause you. This required work is for the safety of
the crew, the towing vehicle occupants and others traveling the public roadways. We hope you agree the
safety benefits surpass the inconvenience.
Very truly yours,
PRODUCT SAFETY DEPARTMENT
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice
to the lessee within ten (10) days.
If the authorized dealer has failed or is unable to remedy the defect without charge and within a reasonable
time, contact Vermeer Product Safety by email at productsafety@vermeer.com or by calling 800-829-0051 or
641-621-7060. You may also submit a complaint to the Administrator, National Highway Traffic Safety
Administration, 1200 New Jersey Avenue SE, Washington, D.C. 20590 or call the Vehicle Safety Hotline at
888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov
Page 8 of 12
SVC2020-096 16 July 2020
NHTSA SAFETY RECALL NUMBER 20V-085
VIA USPS CERTIFIED/REGISTERED MAIL
July 30, 2020
Dear «MODEL» Owner:
This notice is sent to you in accordance with the requirements of the U.S. National Traffic and Motor Vehicle
Safety Act.
In March 2020, Vermeer decided that a defect, that relates to motor vehicle safety, existed in certain model
year 2016–2020 Vermeer «MODEL» brush chipper. At that time, Vermeer Corporation sent owners an interim
notice (a copy is enclosed) asking owners to inspect the wheels and complete and return a Wheel Lug Nut
inspection form and wheel photos. According to our records, you have not returned the inspection form
and/or contacted your dealer regarding this field issue. The final field campaign remedy is now available.
What is the issue?
Certain brush chippers with specific wheels (steel rim) with bolt pattern 8 on 6½ inch (165 mm) circle to be
used with 5/8-inch studs provided by a supplier:
have an incorrect lug nut contact area causing the wheel lug nuts to loosen; and/or
can develop possible cracks causing the tire to lose air pressure.
Both conditions may increase the risk of wheel loss and the risk of a crash. Death or serious injury is
possible. Property damage may also occur.
IMMEDIATE WHEEL INSPECTION REQUIRED
1. WHEEL AND LUG NUT INSPECTION. Inspect each brush chipper wheel by referencing the photos to
identify if defective supplier wheels are installed. If you own more than one affected brush chipper, you will
receive a letter for each machine. The Model and VIN is shown on the top right of this letter and the Wheel
Sample Owner Letter #2 –
NO Owner inspection
response received,
unknown wheel status
IMPORTANT
SAFETY
RECALL
First Notice
BC1800XL Wheel and Tire
Assembly Replacement Kit
(IK00-3942)
Field campaign remedy is now available.
Model: «Model»
This notice applies to your vehicle,
Serial No: «VIN»
Sa _J_ e –
J_ 0 i ection
res.oonsc r(;c\., ✓ed_,
Defective Supplier Wheel
Improper Lug Nut Seat
and Potential Cracks
Properly Manufactured Wheel
Correct Lug Nut Seat
Identified by raised surface only around lug nut location
Page 9 of 12
SVC2020-096 16 July 2020
Lug Nut Inspection form.
2. Does not have defective supplier wheels: See enclosed Wheel Lug Nut Inspection form to be completed
and returned to: safetyform@vermeer.com. Owners who return the Wheel and Lug Nut Inspection form
with photos identifying no defective supplier wheels will be mailed a Vermeer Parts Certificate for $50 USD
redeemable at your local Vermeer dealer. If you do not return the Inspection form, Vermeer Corporation
will continue to send further communications regarding this recall.
3. Has defective supplier wheels, contact your local Vermeer Dealer for new wheel and tire
assembly. IK00-3942 has been created to provide the necessary parts and instructions to replace the
wheel and tire assembly, install a new safety sign (shown below), install a new wheel/tire specification
placard decal and provide a Supplemental Operator’s and Maintenance Manual. This kit must be
installed as soon as possible.
Please continue to verify the torque of each lug
nut [210 ft-lb (285 Nm)] and tire pressure [80 psi
(550 kPa)] as part of your pre-trip inspection
every day or at a minimum every 150 miles (250
km).
Please contact your authorized, independent
Vermeer dealer immediately to arrange a mutually
acceptable time and location to install IK00-3942 at
no cost to you for labor or materials. The
installation of this kit is estimated at 4.0 hours of
labor. If the Vermeer dealer travels to the unit to
install the kit, costs may be incurred by the owner.
You must have your machine upgraded for
these safety features.
Contact your local Vermeer Dealer: «Service_Dealer_Name»
«Serv_Dealer_Add1» «Serv_Dealer_Add2»
«Serv_Dealer_City» «Serv_Dealer_St» «Serv_Dealer_Zip»
«SERV_DEALER_COUNTRY»
Telephone: «Serv_Dealer_Phone»
According to our records, you currently own a Vermeer «MODEL» brush chipper. The Model and Serial
Number of the «MODEL» is shown at the top right of this letter. If you no longer own this unit, please notify the
Product Safety Department at:
Toll Free: 800-829-0051, extension 7060
Telephone: 641-621-7060
E-mail: productsafety@vermeer.com
If possible, please provide the name and address of the new owner.
We regret any inconvenience these corrective measures may cause you. This required work is for the safety of
the crew, the towing vehicle occupants and others traveling the public roadways. We hope you agree the
safety benefits surpass the inconvenience.
Very truly yours,
PRODUCT SAFETY DEPARTMENT
Enclosures
March 12, 2020 Interim Notice Wheel and Lug Nut Inspection
First Notice Wheel and Lug Nut Inspection Form
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice
to the lessee within ten (10) days.
If the authorized dealer has failed or is unable to remedy the defect without charge and within a reasonable
time, contact Vermeer Product Safety by email at productsafety@vermeer.com or by calling 800-829-0051 or
—–·—.-. ~-..- -.-. .
X ✓
9 (5…)
_______ ..,. ____ _
-UN-…,.-,__
AL.WAYS ___ ~——-
Page 10 of 12
SVC2020-096 16 July 2020
641-621-7060. You may also submit a complaint to the Administrator, National Highway Traffic Safety
Administration, 1200 New Jersey Avenue SE, Washington, D.C. 20590 or call the Vehicle Safety Hotline at
888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
Page 11 of 12
SVC2020-096 16 July 2020
If defective wheels are installed (left photo above),
1) Contact your local Vermeer dealer immediately to arrange installation of IK00-3942 Wheel and Tire
Assembly Replacement Kit.
2) Prior to having this field remedy kit installed,
a) If one or more lug nut is missing or loose, using a calibrated torque wrench, torque to 210 ft-lb (285
Nm).
b) Tire Pressure. If their pressure is not at 80 psi (550 kPa), the wheel may have a crack. The crack may
not be visible
c) Verify torque on each lug nut [210 ft-lb (285 Nm)] and tire pressure [80 psi (550 kPa)] as part of
your pre-trip inspection every day or at a minimum every 150 miles (250 km) until IK00-3942:
Wheel and Tire Assembly Replacement Kit is installed by your Vermeer dealer.
3) Do not tow the brush chipper without all lug nuts properly installed or with low tire pressure.
If properly manufactured wheels are installed (right photo on above), take photos of each wheel, complete
and return Page 2 of this Wheel and Lug Nut Inspection form and photos to: safetyform@vermeer.com. Vermeer
Corporation will record in its records that your brush chipper is not affected by this product safety recall and
mail a Vermeer Parts Certificate for $50.00 USD redeemable at your local Vermeer dealer.
If you do not return this form or do not contact your Vermeer dealer, additional notices will be sent advising you
of this field campaign issue.
BC1800XL WHEEL AND LUG NUT INSPECTION FORM
Using photos below, inspect each brush chipper wheel to determine if defective supplier wheels are installed
Defective Supplier Wheel
Improper Lug Nut Seat
and Potential Cracks
Identified by continuously raised lug nut surface
Properly Manufactured Wheel
Correct Lug Nut Seat
Identified by raised surface only around lug nut
location
Model: «Model»
This notice applies to your vehicle,
Serial No: «VIN»
Complete Page 2 ONLY if NO defective wheels are
installed on this brush chipper.
IMPORTANT
SAFETY
RECALL
First Notice
BC1800XL Wheel and Tire
Assembly Replacement Kit
(IK00-3942)
Field campaign remedy is now available.
Vermeer Corporation
Product Safety Department
1210 Vermeer Rd East
Pella, IA 50219 USA
Email: safetyform@vermeer.com
Telephone: 641.621.7060
Toll Free: 800.829.0051
Page 1
Vermeer· y
Page 12 of 12
SVC2020-096 16 July 2020
Enter date signed
below:
I certify that the documents attached to this Wheel and Lug Nut Inspection
form are true and accurate.
X
Sign on the line above.
Print name here:
Vermeer Corporation will mail $50.00 USD Vermeer Parts Certificate for your inspection finding no
defective wheels. Please allow 2–4 weeks for processing. Thank you for your cooperation.
1) Take photos of each wheel.
2) Complete this page 2 of Wheel and Lug Nut Inspection form.
3) Email photos and form to: s afetyform@vermeer.com
Wheel inspection
results:
Wheel 1 No defective wheel installed
Wheel 2 No defective wheel installed
Wheel 3 No defective wheel installed
Wheel 4 No defective wheel installed
If any of the 4 wheels on your brush chipper are defective (photo on left on Page 1),
contact your Vermeer dealer immediately to have IK00-3942 installed on your brush chipper.
Contact Name:
Contact Email:
Company:
Address:
City, State, Postal
Code, Country:
Model: «Model»
This notice applies to your vehicle,
Serial No: «VIN»
IMPORTANT
SAFETY
RECALL
First Notice
BC1800XL Wheel and Tire
Assembly Replacement Kit
(IK00-3942)
Field campaign remedy is now available.
Vermeer Corporation
Product Safety Department
1210 Vermeer Rd East
Pella, IA 50219 USA
safetyform@vermeer.com
Telephone: 641.621.7060
Toll Free: 800.829.0051
Page 2
Vermeer Corporation, Product Safety Department
1210 Vermeer Rd East, Pella, IA 50219 USA
Email: safetyform@vermeer.com
Telephone: 641.621.7060 – Fax: 641.621.8562 – Toll Free: 800.829.0051
Vermeer· y
SEOCONTENT-END
Safety Bulletin
RCSB-20V085-0078.pdf 1357.287KB
- One-piece Solid lug nuts feature durable design and provide perfect replacement for your Tacoma, 4Runner, Corolla, GX470
- Specifications: 12x1.5 Thread Pitch; 13/16'' (21mm) Hex; 1.49" (38mm) OAL; Closed End; Color: Chrome
- 10.9-grade Heat-treated premium steel construction, which offers better durability and strength.
- Replace Part # 9094201058, 9008017036, 90942-01058, 9008-17036, 9094201084
- One-piece lug nuts unlike OEM OEM Cap Construction lug nuts, which means Reeauto's Lug nuts will definitely not break apart like your TOYOTA, LEXUS stock lug nuts
- 🚗 WE' RE DIFFERENT - MIKKUPPA innovative closed end bulge Lug Nuts design provides a safer and more reliable closed end nut than any other on the market. One-piece design compared with other two-piece design, Anti-cracking off and make it aesthetically pleasing while ensuring safe driving. 【This kit does not hold the wheel cover! ! !】
- 🚗 PERFECT FIT - Replacement for 2004-2019 Acura TSX. 2002-2019 Chevy Trailblazer, 2001-2019 Ford Escape, 2000-2019 Ford Focus, 2006-2019 Ford Fusion, 1999-2019 Honda Accord/CR-V, 2005-2019 KIA Sportage LX EX, 1995-2019 Toyota Avalon, etc.
- 🚗 SPECIFICATION - M12x1.5 thread - closed end bulge style lug nuts - conical 60 degree seat - 19mm hex - 35.05mm long - 22mm wide - color: silver / chrome. Our nuts have an innovative design in appearance due to personal preference, but the thread specifications fully meet vehicle standards, buy with confidence.
- 🚗 ONE-PIECE LUG NUTS - The one-piece structure design is more splendid and safer than the two-piece design. Triple chrome, cold forged and heat treated steel, anti-rusting and anti-stripped, high strength and durability.
- 🚗 WORRY-FREE SHOPPING EXPERIENCE - We go above and beyond to provide the highest quality wheel lug nut and top notch customer service. Contact us and we will give you a satisfactory answer within 24 hours. The 12-month warranty gives you a worry-free shopping experience.
- For Select Aftermarket and Factory Wheels.
- Specifications: M12 x 1.50 Thread Pitch, 1.40” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Bulge Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues.
- Direct replacement - these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit - available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- For Select Aftermarket and Factory Wheels.
- Specifications: M12 x 1.50 Thread Pitch, 1.40” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Bulge Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact cs@whtknight.com for warranty replacement or fitment issues.
- For Select Aftermarket and Factory Wheels, replacement key adaptor is B07PY59X14 (3800L)
- Specifications: M14x1.50 Thread Pitch, 2.0” Overall Height, 0.90" Diameter, 7 Spline Drive, 60° Conical Seating, Duplex Spline Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction with stylish chrome or black chrome finish. Utilizes 6 spline key adaptor for fast and secure installation
- ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues.
- For Select Aftermarket or Factory Wheels or Wheels wih Hubcaps Covers
- 1/2"-20 Thread Pitch, 0.79” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Open-End Acorn.
- Features: Cold forged carbon steel and tested to industry standards. Durable construction, Stylish zinc finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
- ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues.
- ★𝐒𝐩𝐞𝐜𝐢𝐟𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬: 1/2-20 thread - Closed End Bulge Acorn Style Lug Nuts - Conical 60 Degree Seat - 3/4(19mm) hex - 1.4 inch(35.56mm) long - 22.1mm wide.
- ★𝐅𝐢𝐭 𝐅𝐨𝐫: Compatible with vehicles requiring a 1/2-20 thread and wheels with a conical 60 degree seat with a 3/4" hex, including 1962-1984 DeVille, 1953-1978 Eldorado, 1977-1979 Seville, 1986-1997 Aerostar, 1966-1996 Bronco, 1975-2002 E-150 Econoline, 1991-2012 Explorer, 1975-1996 F150, 1965-2012 Mustang, 1974-2001 Cherokee, 1986-1992 Comanche, 2006-2010 Commander, 1993-2010 Grand Cherokee(only1/2), 2001-2013 Liberty, 1987- 2017 Wrangler and more. Important: They are not compatible with mag seat, ball seat, or round seat.
- ★𝐏𝐥𝐞𝐚𝐬𝐞 𝐍𝐨𝐭𝐞: Our lug nuts are designed for aftermarket wheels only and not work with factory OEM wheels. Recommend to use hand torque wrench instend of impact wrench. Any problem please contace us.
- ★𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: Our lug nuts are manufactured with SCM 435 cold forged steel and heat treated for maximum durability. Precisely machined threads ensure a perfect fit on your vehicle's wheel studs, while a special coating provides exceptional corrosion resistance and appearance.
- ★𝐒𝐞𝐫𝐯𝐢𝐜𝐞: Enjoy peace of mind with our 1-year warranty service. If there are any issues with our lug nuts, please contact us for free replacements, refunds, or other services to ensure customer satisfaction. Your satisfaction are our top priorities.
- 🚗【1.80" LONG】M14x1.5 thread - closed end bulge style lug nuts - conical 60 degree seat - 19mm hex - 1.80 in. long - 0.90 in. wide - color: Chrome. For Conical Required Wheel with 23mm Flange Limit Only. Do Not Capable for Wheel Caps.
- 🚗 【PERFECT FIT】Replacement for 2007-2013 Avalanche, 2015-2021 Colorado, 2003-2014 Express 1500, 1999-2021 Silverado 1500, 2015-2021 Suburban, 2000-2014 Suburban 1500, 1995-2020 Tahoe, 2009-2020 Traverse, 2007-2020 Acadia, 2015-2020 Canyon, 1999-2020 Sierra 1500, 2000-2020 Yukon, 2015-2020 F150/Expedition.
- 🚗【ONE-PIECE DESIGN】On vehicle testing, one-piece design compared with other two-piece design, Anti-cracking off and make it aesthetically pleasing while ensuring safe driving. Our products have undergone extensive on-vehicle testing to ensure proper fit and long-lasting performance before selling them.
- 🚗【ANTI-RUST PROCESS】The surface of the lug nut is chrome-plated, after 72 hours of strict salt spray test, which not only makes the nut resistant to oxygen and corrosion, but also gives the nut a bright visual impact. Using infrared drying technology, the paint is integrated with the metal and will Not fall off easily. Manufactured with high-quality SCM 435 Steel (Heat Treated) for stronger.
- 🚗【WORRY-FREE SHOPPING EXPERIENCE】If there is a problem with the number of missing nuts, please don't hesitate to contact us. Every MIKKUPPA product enjoys a 24-hour response, a 30-day unconditional refund and a 1 year warranty. Professional customer service promise to give you a satisfied solution.
- 🚙【WHEEL BOLT LUG NUTS COMPATIABLE VEHICLES】M12x1.25 wheel bolt compatible with 2017-2019 for Compass,2014-2023 for Cherokee,2015-2022 for Renegade, 2015-2017 for Chrysler 200, 2013-2016 for Dodge Dart, 2012-2017 for Fiat 500
- 🚙【FEARTURES】20 Pcs wheel bolts lug nuts are 12*1.25, shank length 28mm. Hex Size:17mm, Seat:Conical/60 grade 35CrMo Lug Nuts are Cold Forged/Exceeds OEM Quality
- 🚙【HIGH QUALITY】These M12x1.25 wheel studs lugs nuts are made from 35CrMo which have tested and meet or exceed OEM performance requirements
- 🚙【PLEASE CHECK】 Check your original thread pitch and seat type carefully, this only fit for M12x1.25 and conical/cone seat as shown
- 🚙【BUYING SERVICE】We provide ONE YEAR WARRANTY for our this product.If you have any questions about products, please feel free contact us, we will provide you with the most satisfactory solution
Last update on 2024-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.