Navistar, Inc. (Navistar) is recalling certain 2015-2019 IC Bus CE school buses, equipped with certain S-Series and K-Series Titanium Wheelchair Lifts, models K200, K201, K550, K551, S200, S2201, S550 and S551. The wheelchair lift positioning input cam may fail while the lift is in use, allowing the platform to travel higher than the vehicle's floor height.
Navistar will notify owners, and IC Bus or Ricon dealers will replace the injection molded cam with an aluminum machined cam, free of charge. The recall is expected to begin October 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
September 17, 2018
- Easily carry scooters and wheelchairs behind any car or truck with a Class III or IV 2" hitch receiver
- Folds upright against vehicle when not in use to make driving and parking easier
- Includes an anti-rattle device, 5/8" hitch pin, exclusive ergonomically designed T-handle spring pull pin and 10 tie-down points for maximum security
- Manufactured from durable, powder-coated steel with a 400 lb. weight capacity
- Platform measures 48" L x 27-3/4" W, loading ramp measures 42" L x 27-1/2" W
- MOUNTED CARGO HITCH CARRIER: Designed with easy loading and transporting in mind, our cargo carrier comes equipped with a 42” long loading ramp for wheelchairs, scooters, lawn mowers, small wheeled equipment that also folds up towards the carrier platform after equipment is loaded. Fits into a 2” Class III receiver only, will not work in 1 ¼” hitches.
- MAXIMUM 500LB CAPACITY: This folding cargo carrier can support up to 500 lbs due to its heavy duty steel construction. Use easily as a wheelchair ramp or hitch luggage rack. Weight must be centered and evenly distributed on the platform.
- EASY TO USE: Spring loaded locking pins make this hitch hauler easy to fold, open and lock the ramp in place when in use and carrier folds up towards the vehicle when not in use and storage.
- SAFETY AND SECURITY: Two round reflectors are located on the back for visibility and safety when using at night. With 10 tie down points available for safety straps you will have plenty of ways to secure your cargo.
- DIMENSIONS AND WEIGHT: Outside dimensions of the cargo carrier measure 48" long x 27 ¾” wide x 4" high with the platform measuring 46.5" long x 27 ½" wide and the ramp measures 42" long. Total weight of carrier is 75 lbs.
- Polyester Fabric makes it durable and reuse,reinforced stitching at handles,4 handles help distribute the patients weight evenly over, ease positioning and transfer safety.
- Lightweight transfer belt withstand the weight is 220 lb; Extra fixed band to tighten the waist and thigh to hold the patient safe.
- Simple and easy to use transfer pad for transferring patient from the wheelchair to the bed, car, or another chair.
- Transport board belt for Medical Transport,Healthcare Bed Transferring,Daily Living and Home Care Mobility Devices, Fit Wheelchair Users, Elderly, Bariatric Patient, Disabled, Handicap.
- NOTE: Two or three caregivers are needed to move the patient, only one caregiver can not move the patient.
- Durable black powder coated finish,heavy duty steel construction. It can be used as a carrier and a ramp; simply attach it to your hitch. Provides instant cargo space when your car is out of space.
- Folding ramp can also be locked flat when not in use. 3-position carrier (closed flat, open L-shape & open flat.Tie down straps can be hooked onto any of the tie down holes featured on the ramp sides. Handle on the ramp for easy folding and unfolding.
- Fits All 2" Receiver, Hitch Class III Or IV. Has a 3 inch safety rail. Highly recommended for heavy duty cargo like generator to fix in the middle position.
- Weight Capacity of Ramp: Up to 400 lbs.Total length of ramp when expended is 42 inch. Total weight of carrier 75 Lbs; Weight of ramp (gate) 16 lbs.
- Never exceed the rated capacities of your hitch. Hitch tightener is required to prevent the rack from wobbling,anti wobble plate is not included.
- YOUR FIRM, 4 INCH FOAM SEAT RISER CUSHION MAKES IT EASIER TO RISE from wheelchairs, car seats, office chairs, or chairs around the house. Especially helpful for low or soft chairs
- INCLUDES REMOVABLE HARD BOARD INSERT FOR ADDITIONAL FIRMNESS AND REMOVABLE COVER with strap handles for easy carrying. The hard board insert eliminates the bowing or hammock effect in wheelchairs
- PERFECT CAR SEAT CUSHION FOR DRIVERS who need more height for seeing over the dash or getting out of the car easier. Fits easily at 16 by 16 by 4 inches and weighs only 3.1 pounds
- HELP REDUCE BACK PAIN AND MAKE GETTING UP EASIER AND MORE COMFORTABLE FOR YOU OR YOUR LOVED ONES at home, in the car, the office, at the doctors office, or traveling. Your seat riser cushion will provide the lift you are looking for
- WARRANTY AND GUARANTEE: Amazon Exclusive Limited warranty may apply. Please see product for additional details. Note: we can only guarantee the quality of this product when sold through Amazon.com or Brazos Walking Sticks
- 【A Perfect Transportation】 Our aluminum cargo carrier is ideal to carry wheelchair, scooter, lawn mower, snow blower and other cargo you may have, which which effectively solve the problem that these goods are inconvenient to transport.
- 【High Quality Aluminum Material】 Constructed with heavy duty aluminum structure, the cargo carrier is rust and corrosion resistant. It has the maximum bearing capacity of 500 lbs, and it weighs 40 lbs.
- 【Humanized Designs to Keep Safe】 a. Multiple tie-down points for securing your cargo; b. Reflectors to increase safety while driving on the road at night. c. 9” safety rail to prevent cargo from falling down. d. the ramp is secured by two pins to keep it steady and secured.
- 【Applicable to a Variety of Vehicles】 This hitch-mounted carrier is suitable for most vehicles, like trucks, SUVs, or vans. Use this basket carrier to haul cargo behind any vehicle with a Class III or IV 2" hitch receiver.
- 【Detailed Product Information】 The basket measures 50” (L) X 29.5” (W) , and the ramp measures 41.5” (L) X 27.5” (W). Please bring your own M5, M6 and M8 wrenches before installation.
- Materials: Made of Oxford cloth mixing with cotton which makes the item feel soft, you would feel super comfortable when it touched with your skins. Handles and shoulder straps are very strong.Withstand the weight is 220 lb.
- Reduce Stress: Even two person could operate it easily, this paralyzed belt could help reduce the pressure of home nursing and family care effectively.
- Function: Simple and easy to use transfer pad for transferring patient from the wheelchair to the bed, sofa,car,wheelchairs, or another chair.
- 8 handles+2 shoulder straps help distribute the patients weight evenly over, ease positioning and transfer safety.8 handles for short distance/Strong people to use; 8 handles+2 shoulder for long distance/Weak people to use
- Suitable for people who are paralyzed, elderly, Bariatric Patient,disabled or injured. Note: This product is not suitable for Patient Lift Hydraulic
- 🌟 Rigid Foot Lifter：with two hand grip loops, provides a better support and easier to operate. Easy to lift and reposition the leg.
- 🌟 Leg Lifter Strap：helps to reposition the leg on bed, car, couch and wheelchair. A great lifter loop for elderly, after surgery or limited mobility person.
- 🌟 Adjustable & Durable：nylon webbing with iron wire liner, maintains its rigidity. Can adjust a shape according your needs. Designed to fit most foot.
- 🌟 Help Recovery From Surgery：a leg lifter strap for after hip or knee surgery to get in in and out of bed. To increase mobility after hip or knee replacement, foot surgery or other leg injuries.
- ✅ SIZE：about 37'' L x 1'' W x 0.2'' H - item would be folded in three for shipping
- PROVIDED EXTRA HEIGHT:If you need height to see better over the steering wheel or over the hood.This is perfect and so easy to slide in and out.This made you ride 100% more comfortable because your head is supported optimally by your headrest and the seat curves are at the right height,It has improved your safety when driving.This seat cushion supports your back and helps ease the tension you usually has in his neck while long driving.
- COMFORTABLE AND SUPPORTIVE 3D MEMORY FOAM PAD:This is a great car seat cushion made from high-density and Slow rebound memory foam double combination.It can give you extra comfort and enough support and it spreads weight very evenly.The shape of the cushion is very helpful in relieving pressure and redistributing weight when you sitting.For long car rides or short commutes this seat cushion works wonders for alleviating pain while sitting in traffic and finally it absorbs bumps in the car.
- ERGONOMIC DESIGN WEDGE CUSHION:Ergonomically designed seat cushion provides maximum back support and comfort while pressure relief on the hip/coccyx/tailbone/sciatica and promotes healthy posture. It's great for driving because most car seats slope downwards in the back, causing lower back pain.the height of the wedge is perfect to level out and balance the angle of my pelvis to my knees,it lifts your pelvis higher than your thighs, which helps naturally align your back and provide comfort.
- LEATHER BREATHABLE FABRIC:Product is well made with quality materials.The cushion fabric is made of leather,high-grade,resistant to dirt and easy to clean.Built-in handle for easy transport.Non-slip bottom design and the bottom grips the seat well and doesn't slide around.The hidden zipper design does not damage the original cushion, easy to remove and wash.
- OVERSIZE DESIGN:Generous dimensions and a universal fit at 18" l x 17.2" w x 2.8" h,It gives you a 2.8 inch boost in driving "height".Risk Free, 30 days hassle free return and refund policy, If Our cushion does not work for you for any reason, return it, and we’ll give 100% of your money back, or replace your cushion!
- For scooter or powerchair transport up to 42" x 27" wheelbase
- Works with Class II, III, or IV vehicle hitch receivers
- Includes self-tension retractors, manual crank backup, license plate holder
- Safely supports up to a maximum 350 lbs
- Durable and reliable construction - Made in the USA
Last update on 2021-02-25 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2021-02-25 / Affiliate links / Images from Amazon Product Advertising API