“This site contains affiliate links for which OEMDTC may be compensated” |
March 31, 2023 NHTSA CAMPAIGN NUMBER: 23E028000
Corrosion on Remote Control Circuit Board
A winch that operates unintentionally increases the risk of injury.
NHTSA Campaign Number: 23E028
Manufacturer Felling Trailers, Inc.
Components ELECTRICAL SYSTEM, EQUIPMENT
Potential Number of Units Affected 6
Summary
Felling Trailers, Inc. (Felling Trailers) is recalling certain 2022-2023 Felling Trailers Drop-Deck and 2023 Deck-Over trailers, equipped with a Warn Winch and a wireless handheld remote. Water may enter the handheld remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally.
Remedy
Felling Trailers will work with Warn Industries, Inc. to provide owners instructions on how to inspect the remote for corrosion and disable the wireless function by removing the battery pack from the remote. If corrosion or water intrusion is found when removing the battery pack owners should stop using the remote and contact WARN customer service for a replacement remote, free of charge. Once new parts are available, WARN will make a replacement water resistant remote available, free of charge. Owner notification letters were mailed April 14, 2023. Owners may contact Felling Trailers customer service at 1-888-335-5464.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
3/13/23 – Was informed via email by NHTSA that their was a recall for this WARN winch.
22E101 Corrosion on Remote Control Circuit Board – WARN VR EVO Winch Wireless/Handheld Remote
22E101 Corrosion on Remote Control Circuit Board – WARN VR EVO Winch Wireless/Handheld Remote
3 Affected Products
Vehicles
MAKE | MODEL | YEAR |
FELLING | DECK-OVER | 2023 |
FELLING | DROP-DECK | 2022-2023 |
5 Associated Documents
Defect Notice 573 Report
RCLRPT-23E028-7519.PDF 214.063KB
Defect Notice 573 Report
RCLRPT-23E028-1161.PDF 214.069KB
Recall Acknowledgement
RCAK-23E028-9454.pdf 645.219KB
Recall 573 Report-Amendment 1 – 04/07/2023
RCLRPT-23E028-9039.PDF 214.56KB
Owner Notification Letter(Part 577)
RCONL-23E028-6421.pdf 204.911KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23E028&docType=RCL
- 【High-Performance Motor and Gearbox】: Equipped with a 5.5KW motor and a 265:1 gear ratio three-stage planetary gearbox, this electric winch delivers impressive power and torque for efficient pulling and recovery. The 7HP motor ensures reliable performance even in demanding situations.
- 【Superior Waterproof Performance】: With an IP67 waterproof rating, this CXRCY electric winch can withstand tough weather conditions, ensuring reliable performance even in the harshest environments.
- 【High Load Capacity】: With a remarkable 13500 lb load capacity, this CXRCY winch offers exceptional strength and reliability. Whether you're pulling your vehicle out of a sticky situation or recovering heavy loads, this winch is up to the task, providing you with peace of mind and confidence.
- 【Wireless and Corded Control】: Enjoy the convenience of both wireless handheld remote control and corded control options. Whether you prefer the freedom of wireless operation or the reliability of a corded connection, this winch has you covered.The remote control has a control range of up to 30 meters, allowing you to operate the winch from a safe distance, providing added convenience and safety.
- 【Special Design for Versatility】: This CXRCY winch is specially designed to meet the needs of various vehicles, including ATVs, UTVs, cars, boats, trucks, jeeps, and modified vehicles. It is also suitable for multi-purpose utility trailers, making it a versatile tool for all your towing requirements.
- Special designed for atv, utv, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers
- 7.2hp 12v series wound motor and three-stage planetary gear system with free spooling clutch. 100' Length 3/8 inch Diameter Nlyon rope
- Waterproof and sandproof, state-of-the-art 500AMP Solenoid. Unique clutch brake system, excellent control
- Please confirm the fit of mounting plate before purchase: outline size :(length X width X height) 20.8 inch X 6.7 inch X 10 inch
- Please read the instruction carefully. The winch can cause short circuits if wiring is wrong. If you have any problems, please feel free to consult with us
- 【STURDY & DURABLE MATERIAL】- Waterproof IP67 rating,this electric truck winches enhanced in almost every area for increasing its durability & sturdy. A black powder-coated finish with stainless steel fasteners and clutch lever, which effectively prevents corrosion and gives it a look that is advanced, capable and strong.
- 【STRONGER CABLE STEEL】- Equipped with stronger 85ft cable steel, which is more favorable by its hardness and durability. The competition aluminum fairlead and dynamic braking system working excellent in improving its efficiency.
- 【POWERFUL MOTOR】- The new powerful 12V 6.6hp motor is connected to a 3-stage planetary gear train system with revised gear ratios for increased pulling power and lightning-fast line speed. It can last for an extended period and works with low noise. Pulling or Lifting power 12000Ibs.
- 【WIRELESS REMOTE CONTROL KIT】- You can control the winches even at a long distance, and potential dangers can be avoided timely with the new wireless remote control boat that can be wired directly to the winch or unplugged for trouble-free wireless operation.
- 【WIDE APPLICATION】- 12000 Ibs pull capacity giving you the power and ability to rescue your vehicle from mud, inclines and broken ground. Suitable for ORV and UTV use. Waterproof, mud proof and snow proof, available to work in all weather conditions.
- XPV AUTO 2500lbs Winch integrate the Remote Control and the Control Box into one, for quick & easy installation and use.
- Pure Copper Motor: 12V DC 1HP permanent magnet, and winch motor is made of pure copper wire, which has a line speed of 2.7 feet per minute with a full load, ensuring faster linear speed under load. NOTE: Do not maintain power to the winch if the motor stalls.
- Strong Cable: 12-STRAND 4MM*15M steel cable High strength steel cable is made of 12 fine stranded rope, falling to the ground quickly when the rope snapping.
- 3-Stage Planetary Gear: This 3-Stage Planetary can decelerate or grow, reverse, and more. The combination of multiple planetary wheel systems can achieve a very large speed ratio, which enables coaxial deceleration or growth.
- Safety guarantee: XPV will offer efficient, timely and friendly customer service. In addition, we will provide return or replacement of accessories within one year.
- [Features] Our winch has a new generation of wireless remote control, with an IP67 waterproof grade, that can operate accurately from a distance regardless of terrain or weather. This versatile controller incorporates wired and wireless control (up to 35m)
- [Electric Winch] The 10000 lb. winch powered by a 4.5kw/5.6hp output permanent magnet DC 12V motor. The new solenoid successfully implements the principles of heat insulation, toughness, high stability, avoid the problem of capstan damage or motor burning caused by insufficient solenoid power. The connection between the clutch and the gear is strengthened by the new clutch system, making it more difficult to damage the clutch
- [Safety] For positive load control, there is a Power in & Power out motor. The powerful current can not only support the motor's operation smoothly and work within its rated current without any current impact, but also ensure the electric winch safety and your safety at all times. A 3 stage, 5.6 HP series wound motor comes with a 218:1 planetary gear ratio.
- [Gear System] With its modern and effective 3 planetary gear system, free spooling clutch and ability to deliver strong traction under load and higher linear speed, this electric winch will prove to be an invaluable travel companion.
- [Installation Dimensions] (length X width X height) 20.8"X 6.5" X 10.24", mounting bolt type: 10.00 ± 0.015" × 4.50 ± 0.010". Synthetic rope: 3/8"x 85 feet.
- Improved Material: Black frosted spray paint reduces external damage and does not rust. The insulation performance and durability of the winch are greatly improved. The all-steel housing protects the winch well, and the orange and black color can be the cool style
- Convenient Wireless Remotes: High quality wireless remote control allows operation of the winch from anywhere within a 50-foot radius. Besides, wired remote control can also meet your specific requirements
- Efficient Running: 12V DC 1.5HP permanent magnet, and motor has a line speed of 6.1 feet per minute with a full load, ensuring faster linear speed under load. The new solenoid truly achieves heat insulation, durability and high stability, avoiding the problem of winch damage or motor burnout caused by insufficient solenoid power. Meanwhile, the new clutch system strengthens the connection between the clutch and the gear, effectively protects the clutch.
- The 3-stage planetary is a combination of high strength, stronger, cold-extrusion features that can withstand intense pressures. In terms of power, differential, variable speed, reversal and other functions are realized. Combined use of 3-stage planetary gear system, can achieve maximum speed ratio and small size, and can achieve coaxial speed change
- Reliable Service: Zesuper support includes a 1-year limited warranty and lifetime free professional technical support. If you have any problem, please free contact us. Circuit breakers are not included.
- [ NEW DESIGN]The newly designed model allows you to be the focus of your exploration of the world.The black frosted spray paint with new material will not rust.And it improves the model's thermal insulation and model's durability.The all-steel shell can protect the winch well.The new design is more conducive to the heat dissipation of the gearbox to ensure the long operation of the winch.
- [SPECIAL DESIGNED]Special designed for atv, utv, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers [STRONG POWER]7.2hp 12v series wound motor and three-stage planetary gear system with free spooling clutch.85' Length7/16" Diameter Nlyon rope
- [STRONG POWER]7.2hp 12v series wound motor and three-stage planetary gear system with free spooling clutch.85' Length7/16" Diameter Nlyon rope
- [POWERFUL PLANETARY GEAR]The real three sets of 3-Stage Planetary enables differential, deceleration (qrowth), reversal, and more. The combined use of multiple groups of planetary wheel systems can achieve a very large speed ratio,which can achieve coaxial deceleration (growth).
- [NEW CONTROL SYSTEM]The new control system will definitely surprise you. The 2-in-1 remote combines wired remote control and infrared remote control power system. The signal control range of the remote controller can reach up to 100ft. Both wired and infrared control have been integrated intio this multifunctional controller
- 5 TON COME ALONG WINCH: Heavy-duty mini come along five ton come along hand winch cable puller delivers serious pulling power for construction, home, farms, ranch, fences, and automotive use. Max horizontal load capacity of 10,000 pounds.
- WINCH HOOK: Heavy duty puller steel construction for added durability; hooks and gears are zinc plated for a long-lasting life in your garage or workshop when pulling, dragging, lifting, or stretching. Safety latch on all hooks to prevent accidents or slipping off.
- RATCHETING CABLE COME ALONG: Powerful ratcheting come along pulling system allows for one-handed operation when pulling or winching even the heaviest loads. The winch cable ratchet pulley system length is 6mm thick and 3.2 meters or 10 feet long.
- DOUBLE GEAR MANUAL WINCH: Double-gear design locks on for evenly distributed force and easy to gauge notched pulling action for an easy, smooth, and consistent. Max vertical load capacity is also called weight capacity of 2 tons or 4,000 pounds.
- LEVER ARM: Includes long industrial hand ratchet handle with PVC coated grip for leverage and 3 latching hooks for added safety and versatility when going off road vehicle recovery, pulling fences, logs, stumps, or rocks.
- Body Size (L x W x H) of this handle winch is 8.6 x 8.6 x 4.7'' (with handle), weighs up to 4.7 lbs, and featues a 26.3ft cable; Portable and suitable for various applications
- Portable 600 lbs capacity winch is designed using heavy-duty carbon steel with a zinc-plated finish for maximum strength and long-term use; Resistant to rust and bad weather
- Manual winch is fitted with an 7.3" anti-slip handle to provide a secure and comfortable grip for convenient cranking of the brake winch with cable; Save labour and turn easily
- Handle crank winch is used with heavy steel structure and hardened steel gear; Gear ratio is 3.1:1 to work efficiently; Mooring hook is equipped with safety claw that allows forward and reverse ratcheting
- Ideally used in multi-function such as: applying lifting sling your boat, trailer, truck and other outdoor sports
- With a pull force of more than 3000 pounds, this electric winch delivers a 1.0kw/ 1.3HP 210 amp 12V DC permanent magnet motor with a 153:1 planetary gear system with a fully loaded line speed of 3.3 ft/min and a load free line speed of 1.3 ft/min.
- Waterproof powder coated surface, resistant to corrosion. Durable 3/16" x 32' synthetic winch rope with high tensile properties is sufficient for any outdoor traction operation.
- Each lead wire is connected to the corresponding position, the connection is very convenient and fast; 12.63-inch (approx. 32.0 cm) blue (-) and yellow (+) wires are connected to the motor; 68.75 inches (about 172.0 cm) Red (+) wire and black (-) wire Connect to battery (All wires: No. 6) Winch and flat rod, mounting bracket (not included in this product). Using grab blocks helps make your job easier; Another safety tip: Place the blanket on the cable to reduce whipping if it comes loose.
- The winch will include an 18.5 x 13 cm (L x W) universal mounting plate for mounting on the rear of the machine, which will need to be modified to fit with each particular machine, as well as a wireless remote control for the 9.8-11.6 m range, a 1.2 m handlebar rocker, and a 0.6 cm U Hook, chain fly bar,8.0 cm mounting bolt pattern.
- We use the planetary gear system, which can automatically brake, while we want to achieve the highest speed and a certain guarantee to provide safe and reliable power in any situation.
Last update on 2024-06-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23E-028 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Submission Date : Felling Trailers, Inc. MAR 31, 2023 NHTSA Recall No. : 23E-028 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Felling Trailers, Inc. Address : 41074 US HWY 71 1525 Main Street South Sauk Centre MN 56378 Company phone : 999 Population : Number of potentially involved : 6 Estimated percentage with defect : 100 % Equipment Information : Brand / Trade 1 : Model : Felling Trailer Various Part No. : Trailer Size : NR Function : NR Descriptive Information : Received notice from vendor(WARN Industries) of a recall on one of their models of winches that we equip on some of our trailers Production Dates : DEC 20, 2021 – NOV 30, 2022 Description of Defect : Description of the Defect : Per WARN Recall Notice 22E-101 ..After investigating field reports of inadvertent activation, Warn determined that getting the remote control wet could result in water ingress and corrosion inside the remote control. This condition could lead to inadvertent activation. It was determined that this condition only affects remote controls with wireless capability that are not water proof. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Per WARN Recall Notice 22E-101 ..Personal injury if winch operates unexpectedly. No injuries have been reported associated with any product failures. No significant property damage other than the winch system, winch mounting brackets and front bumpers have been reported as a result of corrosion related issues. Part 573 Safety Recall Report 23E-028 Page 2 Description of the Cause : NR Identification of Any Warning that can Occur : Per WARN Recall Notice 22E-101 .The vehicle driver or winch operator may hear the winch motor running when not intended Involved Components : Component Name : VR EVO Winch Component Description : Winch Component Part Number : 103250 Supplier Identification : Component Manufacturer Name : WARN Industries, Inc. Address : 12900 SE Capps Road Clackamas Oregon 97015 Country : United States Chronology : 3/13/23 – Was informed via email by NHTSA that their was a recall for this WARN winch. Description of Remedy : Description of Remedy Program : Contacting owners of the effected units. Collecting contact data and working with WARN to reimburse owners per recall report 22E-101 How Remedy Component Differs from Recalled Component : per recall report 22E-101 .. Removing the battery pack from the current remote control disables the wireless function controlling the winch, significantly mitigating the hazard. The remote remains fully usable in the corded configuration when physically plugged into the winch. Unplugging the remote from the winch when not in use eliminates the hazard. The new corded-only remote that will be used in reworked existing unsold inventory, will have a new switch face that is visually different from the The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23E-028 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 current remote. It will not have wireless control functions, including wireless indicator light and mode switch. The internal circuit board will be fully conformal coated and use sealed switches. A new wireless/corded handheld remote is being designed for all new production winches Identify How/When Recall Condition was Corrected in Production : N/A Recall Schedule : Description of Recall Schedule : Calls/emails being sent to dealer effected. Dealers will be in contact with end users. Planned Dealer Notification Date : MAR 31, 2023 – APR 07, 2023 Planned Owner Notification Date : MAR 31, 2023 – APR 07, 2023 Purchaser Information : The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment: Name : NR Address : NR NR Country : NR Company Phone : NR * NR – Not Reported
**************************************************************************************************************
IMPORTANT SAFETY RECALL This notice applies to your trailer, see VIN below NHTSA Recall No. 23E028 and 22E101 April 10th, 2023 Re: Recall on Felling Trailers Equipped with certain Warn Winches To Whom It May Concern This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Felling Trailers, based on information provided by WARN, has decided that a defect, which relates to motor vehicle safety, exists in certain 2022-2023 Drop-Deck and 2023 Deck-Over trailers equipped with WARN branded winch. Felling Trailer Model # _______________ Vin #________________________________ Description of defect: Water may enter the handheld remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally, which increases the risk of injury. Description of Remedy: • Disable wireless function (see instructions below). • Warn will offer $100 coupon from WARN as compensation for lack of wireless function. • Warn will offer a new corded-only remote if current remote shows evidence of corrosion. Disabling Wireless function: Remove battery pack from current remote. This will disable wireless function of remote, significantly mitigating the hazard. The remote will remain functional in the corded configuration when physically plugged into the winch. Unplugging the remote from the winch when not in use eliminates the hazard. Please email or call Scott Brown to request coupon and/or new corded remote. If you are unable receive the remedy for this defect without charge, or within a reasonable amount of time, you may submit a written complaint to: Administrator National Highway Traffic Safety Administration 1200 New Jersey AVE SE Washington, DC 20590 You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. Federal law requires that you forward a copy of this safety recall notice to the lessee within 10 days. Regards, Scott Brown Warranty Manager – Felling Trailers – scott.brown@felling.com – 320-351-1299
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23E-028 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Felling Trailers, Inc. Submission Date : APR 07, 2023 NHTSA Recall No. : 23E-028 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Felling Trailers, Inc. Address : 41074 US HWY 71 1525 Main Street South Sauk Centre MN 56378 Company phone : 999 Population : Number of potentially involved : 6 Estimated percentage with defect : 100 % Equipment Information : Brand / Trade 1 : Felling Trailer Model : FT Part No. : FT-IT-I Size : NR Function : NR Descriptive Information : Received notice from vendor(WARN Industries) of a recall on one of their models of winches that we equip on some of our trailers Production Dates : DEC 20, 2021 – NOV 30, 2022 Brand / Trade 2 : Felling Model : FT Part No. : FT- IT-I (Tilt) Size : NR Function : NR Descriptive Information : Specific records were kept that identified 6 trailers that had this specific part from WARN that are subject to the recall. Production Dates : DEC 19, 2021 – SEP 20, 2022 Part 573 Safety Recall Report 23E-028 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Defect : Description of the Defect : Per WARN Recall Notice 22E-101 ..After investigating field reports of inadvertent activation, Warn determined that getting the remote control wet could result in water ingress and corrosion inside the remote control. This condition could lead to inadvertent activation. It was determined that this condition only affects remote controls with wireless capability that are not water proof. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Per WARN Recall Notice 22E-101 ..Personal injury if winch operates unexpectedly. No injuries have been reported associated with any product failures. No significant property damage other than the winch system, winch mounting brackets and front bumpers have been reported as a result of corrosionrelated issues. Description of the Cause : NR Identification of Any Warning that can Occur : Per WARN Recall Notice 22E-101 .The vehicle driver or winch operator may hear the winch motor running when not intended Involved Components : Component Name : VR EVO Winch Component Description : Winch Component Part Number : 103250 Supplier Identification : Component Manufacturer Name : WARN Industries, Inc. Address : 12900 SE Capps Road Clackamas Oregon 97015 Country : United States Part 573 Safety Recall Report 23E-028 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Chronology : 3/13/23 – Was informed via email by NHTSA that their was a recall for this WARN winch. Description of Remedy : Description of Remedy Program : Contacting owners of the effected units. Collecting contact data and working with WARN to reimburse owners per recall report 22E-101 How Remedy Component Differs from Recalled Component : per recall report 22E-101 .. Removing the battery pack from the current remote control disables the wireless function controlling the winch, significantly mitigating the hazard. The remote remains fully usable in the corded configuration when physically plugged into the winch. Unplugging the remote from the winch when not in use eliminates the hazard. The new corded-only remote that will be used in reworked existing unsoldinventory, will have a new switch face that is visually different from the current remote. It will not have wireless control functions, including wireless indicator light and mode switch. The internal circuit board will be fully conformal coated and use sealed switches. A new wireless/corded handheld remote is being designed for all new production winches Identify How/When Recall Condition was Corrected in Production : N/A Recall Schedule : Description of Recall Schedule : Calls/emails being sent to dealer effected. Dealers will be in contact with end users. Planned Dealer Notification Date : MAR 31, 2023 – APR 07, 2023 Planned Owner Notification Date : MAR 31, 2023 – APR 07, 2023 Purchaser Information : The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment: Name : NR Address : NR NR Country : NR Company Phone : NR Part 573 Safety Recall Report 23E-028 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END