March 17, 2023 NHTSA CAMPAIGN NUMBER: 23V175000
Brake Light May Stay Illuminated
Brake lights that remain illuminated can fail to alert other motorists of the rider’s intention and increase the risk of a crash.
NHTSA Campaign Number: 23V175
Manufacturer Bombardier Recreational Products, Inc.
Components EXTERIOR LIGHTING
Potential Number of Units Affected 34,457
Summary
Bombardier Recreational Products, Inc. (BRP) is recalling certain 2020-2023 Spyder RT and 2022-2023 Ryker motorcycles. The brake lights may stay illuminated even if the brake pedal is not pressed. As such, these motorcycles fail to comply with Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and associated Equipment.”
Remedy
Depending on the model, dealers will replace the brake light switch, adjust the brake light switch, and/or add a spring to the brake light switch, as necessary, free of charge. Owner notification letters are expected to be mailed April 18, 2023. Owners may contact BRP Customer Service at 1-888-272-9222. BRP’s number for this recall is 2023-6.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
In December 2022, network status showed cases of brake lights staying on at a higher rate for MY 20222.
In trying to understand the trend, BRP made various tests and validations and looked at previous model year situation as well. BRP identified two issues:
1- Contamination on a previous brake light switch design which could induce corrosion over time and cause the brake lights to continuously illuminate. The position of the brake light switch in the vehicles is a key factor. The vehicles in this population are the MY2020 and 2021 Spyder RT.
2- The newer design of brake light switch was more resistant to contamination. However, it could have components with excessive friction for a proper brake light illumination functionality. The vehicles in this population are MY2022 and 2023 Spyder RT and MY2022 and 2023 Ryker.
With all the information collected and analyzed, BRP decided on March 9, 2023 it had enough information to report and wants to proceed with a safety recall.
For Spyder RT MY2020-2021-2022 and 2023, BRP received 175 warranty claims, of which 66 came from the USA. For Ryker MY2022-2023, BRP received 265 warranty claims, of which 168 came from the USA. No accident was reported worldwide.
The failure rate varies between models and model years. Spyder RT MY2020-2021 have a failure rate of 1,6%. Spyder RT MY2022 and 2023 have a failure rate of 0,20% and Ryker MY2022-2023 have a failure rate of 1,93%.
6 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| CAN-AM | RYKER | 2022-2023 |
| CAN-AM | SPYDER RT | 2020-2023 |
4 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-23V175-8343.PDF 215.864KB
RCLRPT-23V175-8343
Recall Acknowledgement
RCAK-23V175-5873.pdf 689.694KB
RCAK-23V175-5873
Recall 573 Report – 3/20/23
RCLRPT-23V175-6368.PDF 215.891KB
RCLRPT-23V175-6368
Recall 573 Report – 3/27/23
RCLRPT-23V175-3939.PDF 215.461KB
RCLRPT-23V175-3939
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V175&docType=RCL
- (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high brightness chips per bulb, Working Voltage: 9v-30v.
- Fits: 3056 3057 3057K 3057LL 3155 3157 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4057 4057LL 4057K 4114 4114LL 4114K 4157 4157LL 4157K 4157NA 4157NAK 5702A 5702AK 5702AK etc. Easy installation, plug and play.
- Application: Brake Lights, Tail Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage: Compatible for both CK/SRCK and Standard socket, non-polarity design. 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high Brightness chips per bulb, Working Voltage: 9v-30v
- Fits: 7440A 7440NA 7440 7440SV 7443NA 7441 7443 7443R 7444 992 WY21W W21/5W W21W etc. Easy installation, plug and play.
- Application: Brake Lights, Tail Lights, Stop Lights, Daytime Running Lights, Fog Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage: Compatible for both CK/SRCK and Standard socket, non-polarity design. 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- (Set of 2 W2.5x16q D.F. wedge base 3156/3157 red LED bulbs) LED Chips: Each 3156/3157 LED red bulb is equipped with 39 pieces high quality, high power with high performance led chips per 3156 3157 LED bulb ---360 degree full angle illumination with projector lens design
- Compatible with both standard and CK / SRCK type. Voltage: 12V - 14.8V, Built in stable current IC driver for longer lifespan. Color: Pure red.
- Dual filament LEDs are universal fit for single filament and dual filaments T25 wedge base bulbs. Non-polarity. Cross reference number: 3156, 3056, 3047, 3047LL, 3047K, 3055, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157 ,3157K, 3157X, 3157LL, 3157ST, 3157KX, 3357, 3357LL, 3357K, 3457, 3457K, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, p27/7w, 3157/40610, 3157/17172, 12450004, 78633, 17945, 3156/21863, 9442003, 78625, 17941, etc.
- Application: Used for upgrading OEM dim incandescent or damaged rear turn signals, directional blinker lamps, brake stop tail lights, taillights, rear side marker light amp for much safer driving and luxury looking for automotive cars, trucks, motorcycles, SUVs, vans.
- Warranty: fully ONE YEAR guaranteed for the manufacturer defect.please check the fitment note application before purchasing.
- Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- Longer Life Than Most Standard Bulbs: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- (Set of 2) Newly upgraded version, built-in USA-made smart IC driver for the best light performance and longer lifespan, 7443 Strobe led lights bulbs flash 3 times on-and-off and then keep solid light (Legal blinking times) to avoidthe rear-end collision for automotive cars, trucks, SUVs, RVs.
- LED Chips: Each 7443 LED strobe bulb is equipped with 39 pieces high quality,high power and high performance 2835 led chips; 360° full angle illumination light ouput with projector lens.
- Universal fits T20 wedge 7440 single filament and 7443 dual filament W3x16Q base, big difference between high and low intensity light output, replacing rear 7440 7443 brake stop light, back-up reverse lights, center high-mount stop ( 3rd brake ) lights lamps,etc. Extra load resistors maybe required to avoid the error code or blinking issue.
- The length is about 2.09 inch. Cross reference number: 7440, 7441, 7443, 7443LL, W21/5W, 7443/26201, 78660, 78661, 17919, 7515, HIB7443WM, W21W, 7440/26200, 17632, 7504, 7440LL, 7443-SRCK, 7443-CK,etc.
- One Year Warranty Compatible with both standard type and CK/SRCK type. Voltage: 12V - 24V, built-in stable current IC driver for longer lifespan.
- (Set of 2) LED Chip Type: Each W3x16q Base T20 wedge 7440/7443 LED bulb is equipped with 39 pieces high quality, high power with high performance 2835-SMD LED chips; 360° full angle illumination with projector lens design.
- Upgraded version with newer built-in IC driver and heat dissipation for better light performance and longer lifespan. Color: pure red; Working Voltage: 12V~18V; extra LED resistors maybe required to avoid the signal hyper flash or error code.
- Cross Reference Number: 992,7440, 7440LL, 7440ST, 7441, 7443, 7443LL, 7443ST, 7444, 7444LL, W21W, W21/5W, 7443-SCK, 7443-SRCK, etc
- Application: Used for upgrading the dim incandescent or damaged T20 wedge W21W 7440 7443 brake stop lights, center high-mounted stop lights (3rd brake lights lamps), rear turn signal blinker lamps, side marker, tail lights, taillights lamp, this bulb is compatible both Standard and CK/SRCK Type,safe and easy installation.
- Warranty: Fully ONE YEAR guaranteed for the manufacturer defect.please check the owner manual or Amazon fitment Note to confirm the exact APPLICATION before purchasing to make sure purchase the correct items.
- LIGHTS DIM OVER TIME, REPLACE IN PAIRS: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- EASY TO REPLACE: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- LOW MAINTENANCE AND HIGH DURABILITY: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- LONGER LIFE THAN MOST STANDARD BULBS: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- THE SYLVANIA STANDARD OF QUALITY: With 100+ years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- Full Brightness & Ultra Bright: The 1157 brake/tail led lights bulb is equipped with 54 SMD high performance 3014 & 3SMD 3030 chips per bulb, is adopted with cellular structure design of 360 degrees, Giving brilliant and 360° fuller Red light in your lens, More noticeable when ready to parking or braking, keep safer
- 300% Brightness but Lower Consumption: Full aluminum housing with projection lens for maximum light output and better heat distribution for low power consumption. Voltage: DC 12V， Power: 5W/Bulb, Lumen: 2000LM/Pair. Color: Brilliant Red
- Application: This 1157 light used for upgrading the stock brake light, high brake lights, tail light, high-mount stop lights, and suit for socket 1157 2057 2357 7528 BAY15D P21/5W, etc (Note: Extra load resistor is required to avoid the turn signal fast blinking/hyper flash or error code on the dashboard for some vehicle)
- Error-Free: Equipped with CANBUS driver, non-polarity, and instant-on capability with zero warm-up time. Plug-n-play, easy to install（Amazon comfirm fitment may not correct, Please double check owners manual or original bulb number to confirm before placing an order）
- Stable Use & Longer Lifespan: Built-in Intelligent IC driver and Aluminum build with durable connector, better stable current performance and heat dissipation for a longer lifespan, the service time of the 1157 LED bulb could last up to 30,000 hours
- 【600% Brightness Improved】 Full 360-degree illumination with a projector-style lens, and equipped with 26 PCS 3020 SMD LED chipsets, OXILAM 7443 led brake light bulbs are 5 times brighter than halogen, producing bright red light to keep a distance between vehicles and more effective warning
- 【No Worry for CANBUS Error Issue】 Compatible for both CK/SRCK and standard socket, and fits for 95% vehicle's computer system. For some sensitive models, if you meet flicker/error issue, don't worry. This is normal and could be solved by load resistors. Also, this problem may occur when multiple pairs of this bulb are installed at the same time. Please LET US KNOW and we will provide load resistor or other solutions to minimize the inconvenience to you.
- 【Multi Application】OXILAM 7444 led bulb is commonly used for brake lights, tail lights, stop lights, turn signal lights, parking lights. Fits for 992, 7440, 7441, 7443, 7444, W21W, WY21W, 7440NA, 7440NAK, 7444NA, 7444NAK, 7443LL, T20, etc. With instant start capability and no warm-up time.
- 【60,000Hr Long Lifespan】OXILAM 7440 led bulbs are made of aircraft grade aluminum body and unique bump appearance which effectively pull the heat away from the LED chips, provide up to 60,000 hours continuous lighting, No more frequent changes improved driving experience
- 【Product Specification】Voltage: DC 12V, High Power: 8w/bulb (Other leds on the market are 4 to 6w/bulb), Size: 2.16 x 0.79 x 0.79 inch, Lumen: 4000lm/pair, Color: Brilliant Red NOTE: Amazon filter system may not be 100% accurate or up to date, please check your vehicles owner’s manual or the original bulb to confirm the correct bulb size you need before placing the order
- 【Ultra Bright】- AUTOONE 1157 led bulb is 360 degrees illumination increase the brightness and visibility, 300% brighter output than halogen, without dark spots, no glare to other drivers. Instant start, no delay, safe and reliable enough. 【Dual Brightness】- There are dual brightness in the same bulb. The dim mode is tail light, the bright mode is brake light
- 【Fitment】- Compatible with 1157 BAY15D 1157 1157NA 1157A 1178A 1196 2057 2057A 2357 2357A 2357NA 2397 7528 sockets. 【Application】- Great replacement for brake light, tail light. Plug and play, non-polarity
- 【Longer Working Hours】- AUTOONE 7528 led bulb is aircraft grade aluminum body built and unique bump appearance design increase the heat dissipation area. Wide voltage & constant current provide up to 45, 000 hours lifespan and low power consumption. No more frequent changes improved driving experience
- 【Specifications】- 5pcs high power 3030 SMD chipsets, 18pcs 4014 SMD chipests; Power: 7.5W/ Bulbs; Voltage: 9~18V DC; Current: 0.62A; Lumen: 1400 LM/ Bulbs; IP67 Waterproof; Lifespan: 45,000+hours; Light Color: Brilliant Red
- 【Worry Free Service】- Built-in intelligent IC driver, AUTOONE 1157 bulb are suitable for most of vehicle computer systems without error or flicker, but some sensitive models may require a canbus decoder or load resistor, please get in touch with us to get free decoder or any other problem
Last update on 2023-05-06 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-175 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Bombardier Recreational Products, Inc. Submission Date : MAR 17, 2023 NHTSA Recall No. : 23V-175 Manufacturer Recall No. : 2023-6 Manufacturer Information : Manufacturer Name : Bombardier Recreational Products, Inc. Address : 726 Saint-Joseph Street Valcourt, Quebec 00 JOE 2LO Company phone : 450-532-2211 Population : Number of potentially involved : NR Estimated percentage with defect : NR Vehicle Information : Vehicle 1 : 2020-2021 Can-AM Spyder RT Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : All MY2020 and 2021 are included in this recall. The preliminary quantity for this population of vehicles is 9 379. Production Dates : SEP 18, 2019 – SEP 27, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2022-2023 Can-Am Spyder RT Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : Certain serial numbers of MY2022 and MY2023 are included in this recall. The preliminary quantity for this population is 6 299 vehicles. Production Dates : NOV 10, 2021 – MAR 10, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 3 : 2022-2023 Can-Am Spyder RT Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : Certain serial numbers of MY2022 and 2023 are included in this recall. The Preliminary quantity of vehicles for this populaiton is 6 299. Production Dates : NOV 10, 2021 – MAR 10, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 23V-175 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 4 : 2022-2023 Can-Am Ryker Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : Certain serial numbers of MY2022 and 2023 are included in this recall. The preliminary quantity of vehicles for this population is 18 779. Production Dates : FEB 25, 2021 – MAR 10, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : Brake Light May Stay Illuminated FMVSS 1 : 108 – Lamps, reflective devices, and assoc. Equipment FMVSS 2 : NR Description of the Safety Risk : If the brake lights remain illuminated, it can fail to alert other motorists of the rider’s intention and increase the risk of a crash. Description of the Cause : Potential contamination or component friction in the brake light switch may cause the brake lights to stay illuminated, even when the brake pedal is not pressed. Identification of Any Warning that can Occur : None Involved Components : Component Name 1 : Brake Light Switch Component Description : Brake Light Switch Component Part Number : NR Supplier Identification : Component Manufacturer Name : SMP POLAND SP. Z O.O. Address : 2 MAGAZYNOWA BIALYSTOK Foreign States 15-399 Country : Poland Part 573 Safety Recall Report 23V-175 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Chronology : In December 2022, network status showed cases of brake lights staying on at a higher rate for MY 20222. In trying to understand the trend, BRP made various tests and validations and looked at previous model year situation as well. BRP identified two issues: 1- Contamination on a previous brake light switch design which could induce corrosion over time and cause the brake lights to continuously illuminate. The position of the brake light switch in the vehicles is a key factor. The vehicles in this population are the MY2020 and 2021 Spyder RT. 2- The newer design of brake light switch was more resistant to contamination. However, it could have components with excessive friction for a proper brake light illumination functionality. The vehicles in this population are MY2022 and 2023 Spyder RT and MY2022 and 2023 Ryker. With all the information collected and analyzed, BRP decided on March 9, 2023 it had enough information to report and wants to proceed with a safety recall. No accident was reported worldwide. Description of Remedy : Description of Remedy Program : • BRP will repair the vehicle at no cost. • The repair will be as follows: o For MY2020 and 2021 Spyder RT, the repair is to replace the brake light switch, adjust the brake light switch and add a spring to the brake light switch. o For MY2022 and 2023 Spyder RT, the repair is to add a spring to the brake light switch. o For MY2022 and 2023 Ryker, the repair is to adjust the brake light switch and add a spring to the brake light switch. • The safety recall will be launched on March 17, 2023 • If a customer previously had the same issue as this safety recall and BRP did not cover the cost of the repair, he/she can contact BRP for reimbursement. However, the vehicle will still need to have the safety recall repair. The General Reimbursement plan will be provided. How Remedy Component Differs from Recalled Component : The new brake light switch has been modified to improve its watertightness. MY2020 and 2021 Spyder RT will have this new brake light switch. Readjustment of the brake light switch to a specific torque will be completed on Spyder RT MY2020, 2021 and Ryker MY2022, 2023 A new spring to the brake light switch will be added on MY2020, 2021, 2022, 2023 Spyder RT and MY 2022, 2023 in order to allow proper activation of the brake light with the pedal. Part 573 Safety Recall Report 23V-175 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Identify How/When Recall Condition was Corrected in Production : The vehicles that are still in possession of BRP will be corrected with the same remedy as per the remedy program. It is also currently planned that this will also apply for vehicles MY23 that will be produced after that date. Recall Schedule : Description of Recall Schedule : BRP is targeting to inform dealers about this situation before the end of the day on March 17, 2023. Dealers will be instructed to contact their consumers. BRP will also send letters as soon as it will receive the updated registration information from its provider. Planned Dealer Notification Date : MAR 17, 2023 – APR 17, 2023 Planned Owner Notification Date : APR 18, 2023 – APR 30, 2023 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-175 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Bombardier Recreational Products, Inc. Submission Date : MAR 20, 2023 NHTSA Recall No. : 23V-175 Manufacturer Recall No. : 2023-6 Manufacturer Information : Manufacturer Name : Bombardier Recreational Products, Inc. Address : 726 Saint-Joseph Street Valcourt, Quebec 00 JOE 2LO Company phone : 450-532-2211 Population : Number of potentially involved : NR Estimated percentage with defect : NR Vehicle Information : Vehicle 1 : 2020-2021 Can-AM Spyder RT Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : All MY2020 and 2021 are included in this recall. The final quantity for this population of vehicles is 9 379. Production Dates : SEP 18, 2019 – SEP 27, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2022-2023 Can-Am Ryker Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : Certain serial numbers of MY2022 and 2023 are included in this recall. The preliminary quantity of vehicles for this population is 18 779. Production Dates : FEB 25, 2021 – MAR 10, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 3 : 2022-2023 Can-Am Spyder RT Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : Certain serial numbers of MY2022 and 2023 are included in this recall. The Preliminary quantity of vehicles for this populaiton is 6 299. Production Dates : NOV 10, 2021 – MAR 10, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 23V-175 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 4 : 2022-2023 Can-Am Spyder RT Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : Certain serial numbers of MY2022 and MY2023 are included in this recall. The preliminary quantity for this population is 6 299 vehicles. Production Dates : NOV 10, 2021 – MAR 10, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : Brake Light May Stay Illuminated FMVSS 1 : 108 – Lamps, reflective devices, and assoc. Equipment FMVSS 2 : NR Description of the Safety Risk : If the brake lights remain illuminated, it can fail to alert other motorists of the rider’s intention and increase the risk of a crash. Description of the Cause : Potential contamination or component friction in the brake light switch may cause the brake lights to stay illuminated, even when the brake pedal is not pressed. Identification of Any Warning that can Occur : None Involved Components : Component Name 1 : Brake Light Switch Component Description : Brake Light Switch Component Part Number : NR Supplier Identification : Component Manufacturer Name : SMP POLAND SP. Z O.O. Address : 2 MAGAZYNOWA BIALYSTOK Foreign States 15-399 Country : Poland Part 573 Safety Recall Report 23V-175 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Chronology : In December 2022, network status showed cases of brake lights staying on at a higher rate for MY 20222. In trying to understand the trend, BRP made various tests and validations and looked at previous model year situation as well. BRP identified two issues: 1- Contamination on a previous brake light switch design which could induce corrosion over time and cause the brake lights to continuously illuminate. The position of the brake light switch in the vehicles is a key factor. The vehicles in this population are the MY2020 and 2021 Spyder RT. 2- The newer design of brake light switch was more resistant to contamination. However, it could have components with excessive friction for a proper brake light illumination functionality. The vehicles in this population are MY2022 and 2023 Spyder RT and MY2022 and 2023 Ryker. With all the information collected and analyzed, BRP decided on March 9, 2023 it had enough information to report and wants to proceed with a safety recall. No accident was reported worldwide. Description of Remedy : Description of Remedy Program : • BRP will repair the vehicle at no cost. • The repair will be as follows: o For MY2020 and 2021 Spyder RT, the repair is to replace the brake light switch, adjust the brake light switch and add a spring to the brake light switch. o For MY2022 and 2023 Spyder RT, the repair is to add a spring to the brake light switch. o For MY2022 and 2023 Ryker, the repair is to adjust the brake light switch and add a spring to the brake light switch. • The safety recall will be launched on March 17, 2023 • If a customer previously had the same issue as this safety recall and BRP did not cover the cost of the repair, he/she can contact BRP for reimbursement. However, the vehicle will still need to have the safety recall repair. The General Reimbursement plan will be provided. How Remedy Component Differs from Recalled Component : The new brake light switch has been modified to improve its watertightness. MY2020 and 2021 Spyder RT will have this new brake light switch. Readjustment of the brake light switch to a specific torque will be completed on Spyder RT MY2020, 2021 and Ryker MY2022, 2023 A new spring to the brake light switch will be added on MY2020, 2021, 2022, 2023 Spyder RT and MY 2022, 2023 in order to allow proper activation of the brake light with the pedal. Part 573 Safety Recall Report 23V-175 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Identify How/When Recall Condition was Corrected in Production : The vehicles that are still in possession of BRP will be corrected with the same remedy as per the remedy program. It is also currently planned that this will also apply for vehicles MY23 that will be produced after that date. Recall Schedule : Description of Recall Schedule : BRP is targeting to inform dealers about this situation before the end of the day on March 17, 2023. Dealers will be instructed to contact their consumers. BRP will also send letters as soon as it will receive the updated registration information from its provider. Planned Dealer Notification Date : MAR 17, 2023 – APR 17, 2023 Planned Owner Notification Date : APR 18, 2023 – APR 30, 2023 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-175 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Submission Date : Bombardier Recreational Products, Inc. MAR 27, 2023 NHTSA Recall No. : 23V-175 Manufacturer Recall No. : 2023-6 Manufacturer Information : Manufacturer Name : Bombardier Recreational Products, Inc. Address : 726 Saint-Joseph Street Valcourt, Quebec 00 JOE 2LO Company phone : 450-532-2211 Population : Number of potentially involved : 34,888 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2020-2021 Can-AM Spyder RT Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : All MY2020 and 2021 are included in this recall. The final quantity for this population of vehicles is 9 379. Production Dates : SEP 18, 2019 – SEP 27, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2022-2023 Can-Am Spyder RT Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : Certain serial numbers of MY2022 and 2023 are included in this recall. The final quantity of vehicles for this populaiton is 6 558 Production Dates : NOV 10, 2021 – MAR 10, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 3 : 2022-2023 Can-Am Ryker Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : Certain serial numbers of MY2022 and 2023 are included in this recall. The final quantity of vehicles for this population is 18 951. Production Dates : FEB 25, 2021 – MAR 10, 2023 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 23V-175 Page 2 Description of Noncompliance : Description of the Noncompliance : Brake Light May Stay Illuminated FMVSS 1 : 108 – Lamps, reflective devices, and assoc. Equipment FMVSS 2 : NR Description of the Safety Risk : If the brake lights remain illuminated, it can fail to alert other motorists of the rider’s intention and increase the risk of a crash. Description of the Cause : Potential contamination or component friction in the brake light switch may cause the brake lights to stay illuminated, even when the brake pedal is not pressed. Identification of Any Warning that can Occur : None Involved Components : Component Name 1 : Brake Light Switch Component Description : Brake Light Switch Component Part Number : NR Supplier Identification : Component Manufacturer Name : SMP POLAND SP. Z O.O. Address : 2 MAGAZYNOWA BIALYSTOK Foreign States 15-399 Country : Poland Chronology : In December 2022, network status showed cases of brake lights staying on at a higher rate for MY 20222. In trying to understand the trend, BRP made various tests and validations and looked at previous model year situation as well. BRP identified two issues: 1- Contamination on a previous brake light switch design which could induce corrosion over time and cause the brake lights to continuously illuminate. The position of the brake light switch in the vehicles is a key factor. The vehicles in this population are the MY2020 and 2021 Spyder RT. 2- The newer design of brake light switch was more resistant to contamination. However, it could have The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-175 Page 3 components with excessive friction for a proper brake light illumination functionality. The vehicles in this population are MY2022 and 2023 Spyder RT and MY2022 and 2023 Ryker. With all the information collected and analyzed, BRP decided on March 9, 2023 it had enough information to report and wants to proceed with a safety recall. For Spyder RT MY2020-2021-2022 and 2023, BRP received 175 warranty claims, of which 66 came from the USA. For Ryker MY2022-2023, BRP received 265 warranty claims, of which 168 came from the USA. No accident was reported worldwide. The failure rate varies between models and model years. Spyder RT MY2020-2021 have a failure rate of 1,6%. Spyder RT MY2022 and 2023 have a failure rate of 0,20% and Ryker MY2022-2023 have a failure rate of 1,93%. Description of Remedy : Description of Remedy Program : • BRP will repair the vehicle at no cost. • The repair will be as follows: o For MY2020 and 2021 Spyder RT, the repair is to replace the brake light switch, adjust the brake light switch and add a spring to the brake light switch. o For MY2022 and 2023 Spyder RT, the repair is to add a spring to the brake light switch. o For MY2022 and 2023 Ryker, the repair is to adjust the brake light switch and add a spring to the brake light switch. • The safety recall will be launched on March 17, 2023 • If a customer previously had the same issue as this safety recall and BRP did not cover the cost of the repair, he/she can contact BRP for reimbursement. However, the vehicle will still need to have the safety recall repair. The General Reimbursement plan will be provided. How Remedy Component Differs from Recalled Component : The new brake light switch has been modified to improve its watertightness. MY2020 and 2021 Spyder RT will have this new brake light switch. Readjustment of the brake light switch to a specific torque will be completed on Spyder RT MY2020, 2021 and Ryker MY2022, 2023 A new spring to the brake light switch will be added on MY2020, 2021, 2022, 2023 Spyder RT and MY 2022, 2023 in order to allow proper activation of the brake light with the pedal. Identify How/When Recall Condition was Corrected in Production : The vehicles that are still in possession of BRP will be corrected with the same remedy as per the remedy program. It is also currently planned that this will also apply for vehicles MY23 that will be produced after that date. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-175 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : BRP is targeting to inform dealers about this situation before the end of the day on March 17, 2023. Dealers will be instructed to contact their consumers. BRP will also send letters as soon as it will receive the updated registration information from its provider. Planned Dealer Notification Date : MAR 17, 2023 – APR 17, 2023 Planned Owner Notification Date : APR 18, 2023 – APR 30, 2023 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
