March 14, 2023 NHTSA CAMPAIGN NUMBER: 23C003000
Insufficient Child Seat Inner Carrier/FMVSS 213
In the event of a crash, an insufficiently restrained child has an increased risk of injury.
NHTSA Campaign Number: 23C003
Manufacturer Dorel Juvenile Group
Components CHILD SEAT
Potential Number of Units Affected 14,510
Summary
Dorel Juvenile Group (Dorel) is recalling certain Maxi-Cosi Coral XP Rear-facing Infant Seats with model number IC313. The child seat inner carrier is not sufficient to restrain a child without the use of the outer carrier. As such, these child seats fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 213, “Child Restraint Systems.”
Remedy
Owners are advised to only use the inner carrier of the Coral XP when it is attached to the outer carrier and installed with or without the base using the vehicle belt restraint system, consistent with the existing instruction booklet and labels. Dorel will offer a refund or replace the child seat, free of charge. Owner notification letters are expected to be mailed April 7, 2023. Owners may contact Dorel’s customer service at 1-877-657-9546 or CoralXPRecall@djgusa.com.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
On 3/9/2023 Dorel attended a video call meeting with NHTSA OVSC representatives who shared concerns about the inner carrier of the IC313 Maxi-Cosi Coral XP Infant Car Seat. NHTSA followed up after the call and emailed draft compliance reports for the Coral XP related to their FY2021 testing and FY2022 testing. Both draft reports indicated noncompliance’s related to the design and labeling of the Coral XP’s inner carrier, which is considered by NHTSA to be the “child restraint system”. Coral XP’s inner carrier cannot be installed into a vehicle without the use of the outer carrier, which NHTSA considers to be a “supplemental device”. As such all Coral XP models fail to comply with the requirements of Federal Motor Safety Standard 213, “Child Restraint Systems.”
1 Affected Product
BRAND | MODEL | PRODUCTION DATES |
MAXI-COSI | CORAL XP |
2 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-23C003-3968.PDF 214.212KB
RCLRPT-23C003-3968
Recall Acknowledgement
RCAK-23C003-1361.pdf 645.794KB
RCAK-23C003-1361
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23C003&docType=RCL
- SNUGRIDE PERFORMANCE: Infant car seat helps protect rear-facing infants 4-35 lb and up to 32"
- LIGHTWEIGHT CARRIER: Lightweight infant car seat weighs only 7.2 lb, making it easy to carry baby from car to stroller
- 4-POSITION ADJUSTABLE BASE: Helps ensure an accurate install and helps keep baby comfortable as he or she grows
- EASY-TO-READ LEVEL INDICATOR: Helps eliminate guesswork from the installation process, so you can feel confident it’s installed correctly
- PROTECTPLUS ENGINEERED: Helps protect your little one in frontal, side, rear, and rollover crashes
- Doona Car Seat - From car seat to stroller in seconds! One simple motion operation. Features a 5-point harness, adjustable handlebar (also acts as an anti-rebound bar inside the car) and 3 Layer Side Impact Protection.
- Washable Car Seat - The Doona car seat fabric is removable and washable. Features baby safe materials and breathable textiles, including bamboo and memory foam.
- Travel Safe Baby Essentials - This car seat and Latch base is FAA Aircraft Approved for travel. Combine with the Doona Travel Bag (sold separately) for a seamless travel experience.
- Included in the Box - Doona Infant Car Seat, Doona Bamboo Infant Insert, Doona Bamboo Head Support, Doona Vehicle Seat Protector, Doona Car Seat Base. 2-year manufacturer's warranty.
- Rear Facing Car Seat and Base - Suitable from 4 lbs. to 35 lbs., Max. 32in height, this is a rear facing car seat only. Car seat weighs 16.5 lbs., base weighs 10.3 lbs. Product Dimensions: Folded: 23.6x17.3x26 inches; Unfolded: 39x17.3x32.2 inches; Weight: 16.5 lbs.
- Built-in ergonomic grip for an easy lifting technique recommended by chiropractors
- Weighs less than 8 lb for easy carrying and lightweight mobility
- Handle of the car seat can be used as an anti-rebound bar to limit rotation in the event of a collision
- Base includes Flip Foot recline and bubble level indicator to help get the perfect angle
- Plush seating for superior comfort for baby
- Snug Lock Technology features a hassle free 3 step installation rear facing car seat helps protect infants from 4 to 35 pounds and up to 32 Inches quick and easy clean up with the Rapid Remove cover; Head must be more than 1 inch from the top of the headrest Infant car seats made 2011 or after
- Simply Safe Adjust Harness System adjusts headrest and harness together to prevent rethreading Safety Core absorbs frontal crash forces
- Adjustable base with 4 recline positions and easy to read bubble level indicator InRight Latch system for a one second Latch attachment.Do not use bleach
- Rotating canopy with window and visor provides shade and sun; Protection for baby removable newborn head and body; Support cushions baby
- Check your local and state laws, as well as AAP and NHTSA recommendations, for car seat usage Engineered & rigorously crash tested to meet or exceed US Standard FMVSS 213; Machine washable seat cushion and canopy; Metal and plastic parts may be cleaned with mild soap and cool water; Buckle may be cleaned with a damp cloth; Harness straps may be cleaned with a damp cloth
- EPS energy-absorbing foam for superior side impact head protection
- 5-point safety harness; Easy one-hand harness adjustment and push-button release
- Removable 4-piece grow-with-me insert.DO NOT use bleach or harsh detergents.
- Extra-large 3-panel canopy and delta multi-grip carrying handle
- One-hand easy-access seat release
- Extended Use: Accommodates Growing Infants Longer: 4-35 lb weight rating and 4 shoulder harness positions
- Lightweight: Extremely lightweight and easy to carry
- Ergonomic Handle: More comfortable to carry in the bend of the arm
- Full Coverage Canopy: Provides full protection from sun, wind and rain
- Built to grow: the 3 in 1 car seat built to grow for extended use through 3 stages: Rear facing 5 to 40 pounds, forward facing 22 to 65 pounds, and belt positioning booster 40 to 100 pounds
- Side impact protection: The grow and go's side impact protection helps keep your child safe
- Easy in, easy out: Harness holders keep the harness in an open position so it's easy to get your child in and out of the seat; Rear facing height is 19 to 40 inches; Forward facing height is 29 to 52 inches
- Quickfit harness: With the quickfit harness you can easily adjust both the harness and headrest in 1 simple step; 3 position recline makes it easy to get a good fit in your car
- Wash and dry: Machine washable and dryer safe seat pad features snaps that make it simple to take off of the seat; no fuss for truly easy cleaning
- SnugRide performance helps protect rear-facing infants from 4-35 lb and up to 32"
- Anti-Rebound Bar provides an additional layer of rear-facing safety
- SnugLock technology installs in less than one minute using vehicle seat belt or LATCH
- Easy to Clean: Rapid Remove seat pad quickly and easily removes for cleaning
- Installation: SnugLock technology installs in less than one minute using vehicle seat belt or LATCH
- KEEP IT LIGHT: This ultra-lightweight infant car seat weighs in at just under 7 lb
- HAPPY PLANET COLLECTION: Fabrics made with recycled materials as part of our Do More promise to Recycle, Reimagine, and Give Back
- REAR-FACING FOR LITTLES FROM 4-35 LB: Just the right size for your baby bear
- KEEPSAFE PROTECTION: Designed and tested to help provide safe and secure protection so you can focus on the road ahead
- SIDE-IMPACT PROTECTION: Side-impact tested for occupant retention with or without base
- Give your baby a safe and secure fit for travel with this LATCH-equipped Safety 1st car seat that fits infants from four pounds to toddlers of 35 pounds in rear-facing mode.
- Ultra lightweight with exceptional safety using next generation engineering
- Side Impact Protection with deep sides and energy absorbing materials
- 4 harness heights spaced right for a better fit from tiny to tall
- Extra newborn support with head and body inserts
Last update on 2023-05-05 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23C-003 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Dorel Juvenile Group Submission Date : MAR 14, 2023 NHTSA Recall No. : 23C-003 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Dorel Juvenile Group Address : 2525 STATE STREET COLUMBUS IN 47201 Company phone : 800-544-1108 Population : Number of potentially involved : 14,510 Estimated percentage with defect : 100 % Child Restraint Information : Make 1 : Maxi-Cosi Model : Coral XP Seat Type : REARFACING INFANT SEAT Model No. : IC313 Platform Name / No. : NR Brand Name : NR Descriptive Information : On 3/9/2023 Dorel attended a video call meeting with NHTSA OVSC representatives who shared concerns about the inner carrier of the IC313 Maxi- Cosi Coral XP Infant Car Seat. NHTSA followed up after the call and emailed draft compliance reports for the Coral XP related to their FY2021 testing and FY2022 testing. Both draft reports indicated noncompliance’s related to the design and labeling of the Coral XP’s inner carrier, i.e., child restraint system. Coral XP’s child restraint system cannot be installed into a vehicle without the use of the outer carrier, which is a supplemental device. As such all Coral XP models fail to comply with the requirements of Federal Motor Safety Standard 213, “Child Restraint Systems.” Production Dates : MAY 01, 2020 – FEB 28, 2023 Description of Noncompliance : Description of the Noncompliance : During NHTSA’s FY2021 and FY2022 compliance testing on IC313 Maxi-Coral XP Infant Car Seat, several noncompliance’s related to the design and labeling of the Coral XP’s inner carrier were found, including: S5.3.2 Installation, S5.5.1/S5.5.2 Labeling, S5.6.1 Printed Instructions, and S6.1.2 Dynamic Procedure. Coral XP’s child restraint system, i.e., the inner carrier cannot be installed into a vehicle without the use of a supplemental device, i.e., the outer carrier. As such all Coral XP models fail to comply with the requirements of Federal Motor Safety Standard 213, “Child Restraint Systems.” Part 573 Safety Recall Report 23C-003 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 FMVSS 1 : 213 – Child restraint systems FMVSS 2 : NR Description of the Safety Risk : Installing Coral XP into a vehicle with only its inner carrier will not properly restrain the occupant, increasing the risk of injury in a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Component Name : IC313 Maxi-Cosi Coral XP Infant Car Seat Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : On 3/9/2023 Dorel attended a video call meeting with NHTSA OVSC representatives who shared concerns about the inner carrier of the IC313 Maxi-Cosi Coral XP Infant Car Seat. NHTSA followed up after the call and emailed draft compliance reports for the Coral XP related to their FY2021 testing and FY2022 testing. Both draft reports indicated noncompliance’s related to the design and labeling of the Coral XP’s inner carrier, which is considered by NHTSA to be the “child restraint system”. Coral XP’s inner carrier cannot be installed into a vehicle without the use of the outer carrier, which NHTSA considers to be a “supplemental device”. As such all Coral XP models fail to comply with the requirements of Federal Motor Safety Standard 213, “Child Restraint Systems.” Part 573 Safety Recall Report 23C-003 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : Until Dorel can provide Coral XP owners a refund or replacement car seat remedy, the inner carrier of the Coral XP may continue to be used when attached to the outer carrier and the outer carrier is installed with or without the base using the vehicle belt restraint system, consistent with the existing instruction booklet and labels. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : MAR 24, 2023 – MAR 24, 2023 Planned Owner Notification Date : APR 07, 2023 – APR 28, 2023 Purchaser Information : The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment: Name : NR Address : NR NR Country : NR Company Phone : NR * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END