“This site contains affiliate links for which OEMDTC may be compensated” |
December 14, 2022 NHTSA CAMPAIGN NUMBER: 22E099000
The fractured steering arm and tie rod can separate and fall to the ground, increasing the risk of a crash.
NHTSA Campaign Number: 22E099
Manufacturer Williamsen-Godwin Truck Body Company LLC
Components STEERING
Potential Number of Units Affected 12
Summary
Williamsen-Godwin Truck Body Company LLC (Williamsen-Godwin) is recalling certain WPED5W-SL2255 trailers equipped with Smart-Steer 2.0 self-steering axles. The steering arm may fracture during certain conditions, such as low speed and high side-loading.
Remedy
Dealers will install a new steering arm and additional welds, free of charge. The manufacturer has not yet provided a schedule for recall notification. Owners may contact Williamsen-Godwin customer service at 1-801-973-9400.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Please be reminded of the following requirements:
You are required to submit a draft owner notification letter to this office no less than five days prior to mailing it to the customers. Also, copies of all notices, bulletins, dealer notifications, and other communications that relate to this recall, including a copy of the final owner notification letter and any subsequent owner follow-up notification letter(s), are required to be submitted to this office no later than 5 days after they are originally sent (if they are sent to more than one manufacturer, distributor, dealer, or purchaser/owner).
Please be reminded that under 49 U.S.C. § 30112(a)(3), it is illegal for a manufacturer, to sell, offer for sale, import, or introduce or deliver into interstate commerce, a motor vehicle or item of motor vehicle equipment that contains a safety defect once the manufacturer has notified NHTSA about that safety defect. This prohibition does not apply once the motor vehicle or motor vehicle equipment has been remedied according to the manufacturer’s instructions.
As stated in Part 573.7, submission of the first of eight consecutive quarterly status reports is required within one month after the close of the calendar quarter in which notification to purchasers occurs. Therefore, the first quarterly report will be due on, or before, 30 days after the close of the calendar quarter.
Chronology :
10/19/2022 INFORMATION WAS PROVIDED BY DEXTER FOR RECALL # NHTSA ID 22E-080
10/31/2022 EMAILED THE RECALL INFORMATION PROVIDED TO CUSTOMER.
11/16/2022 NOTIFIED BY NTHSA ABOUT THE RECALL, SIGNED UP ON THE PORTAL.
12/15/2022 NOTIFIED OUR ACCOUNT WAS SET UP AND APPROVED AND BEGAN THE FILLING
12/21/2022 RECALL PROCESSED
3/15/2023 OWNER LETTER SENT TO CUSTOMER
22E080 – Steering Arm May Fracture – Dexter Axle Smart-Steer 2.0 Self-Steering Axles
22E080 – Steering Arm May Fracture – Dexter Axle Smart-Steer 2.0 Self-Steering Axles
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
WILLIAMSEN-GODWIN | WPED5W-SL2255 |
8 Associated Documents
Defect Notice 573 Report
RCLRPT-22E099-2008.PDF 213.105KB
Recall Acknowledgement
RCAK-22E099-5255.pdf 647.776KB
Dexter Canada Recall Notice
RCORRD-22E099-5095.pdf 1550.459KB
Customer Email
RCORRD-22E099-1349.pdf 82.661KB
Recall Quarterly Report #1, 2023-1
RCLQRT-22E099-4888.PDF 211.132KB
Recall 573 Report – 4/18/2023
RCLRPT-22E099-1390.PDF 213.774KB
Recall Quarterly Report #2, 2023-2
RCLQRT-22E099-5740.PDF 211.226KB
Recall Quarterly Report #3, 2023-3
RCLQRT-22E099-1519.PDF 211.444KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22E099&docType=RCL
- [4 IN 1 WELDING MACHINE] Capable of flux MIG, gas MIG,MMA, Lift TIG.
- [SYNERGIC CONTROL] Select different thicknesses or adjust the amperage, the recommend voltage and wire feeding speed will be automatically switched into, you can also adjust according to your welding habit. Easy to use for beginners and professionals.
- [LED DISPLAY] Compared to other traditional displays, our intelligent LED display can help you view the data more clearly, such as the current, function mode and welding mode. Give you a better welding experience.
- [GAS/GASLESS WELDING] Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder can work with 2 and 10 pounds rolls of .030"(0.8mm) and .035" (0.9mm) solid core wire, flux core wire. It also performs well with most 6010, 6011, 6013 and 7018 rods in Arc Welding mode.
- [PORTABLE&POWERFUL] Only weigh 19.4lb(8.8kg), compatible with 2lb, up to 10lb wires. And can be plugged into 110V / 220V dual voltage.
- WELD ANYWHERE: Plug in the Weld-Pak 90i MIG wire feed welder anywhere 120V input power is available; It's designed to use with flux-cored welding wire (1/4” max thickness) or solid MIG wire (3/16" max thickness)
- ACCESSORIES INCLUDED: The machine comes with a full list of accessories including a welding gun, nozzle, contact tip, work cable and clamp; Metal case provides protection from the elements
- LIGHT & PORTABLE: Ideal for maintenance and mobile welders, thanks to its small and lightweight (15 lbs) inverter design and shoulder strap for portability; A good choice for professionals but it’s an easy to use welder for beginners too
- SMOOTH & EASY OPERATION: Has simple control with two knobs for wire speed and voltage; Inverter power source makes it more efficient to operate and provides smoother weld characteristics compared to traditional welders
- PERFECT FOR SMALL WELD JOBS: This machine is best for DIY projects, hobbyists, home repairs and more; Infinite welding voltage allows fine-tuning of weld characteristics
- SYNERGIC CONTROL: The recommend current and wire feeding speed will be automatically matched after selected diameter of the welding wire(you can choose .030”/.035”/.040" flux core wire). The MIG welder is easier for beginners or those that are learning to weld and want to make small repairs around the house. 1 Free Flux Core Wire .030".
- 3-IN-1 WELDER: 3 welding modes Flux Core Gasless MIG/ Lift TIG/ MMA meet your different requirements (Need to buy extra Lift tig torch). Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of carbon steel, stainless or even thicker steel, Ideal for home DIY, outdoor repairs, rusty metal, farm and road equipment, and maintenance and repairs.
- SAFETY PROTECTION: The welder comes with an attached MIG torch and power cable, you can weld after unpacking the box, it’s convenient to use. Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine.
- PORTABLE AND COMPACT: The machine weighs only 11.79 pounds, and you can freely carry it anywhere with a handle or shoulder strap. Package includes 1* MIG130 Welder, 1* MIG Torch, 1*Ground Clamp, 1* Electronic Holder, 1* .030"/2lb Flux Cored Wire,1* 0.8/.030" conductive Nozzle,1* 0.9/.035" conductive Nozzle,1* Brush&Hammer,1* User Manual.
- WARM SERVICE & 2-YEAR WARRANTY: 30-Day Money Back Guarantee and 2-Year Warranty. Ideal for fathers day gifts. Every single of our welder machines passed various authoritative Laboratory tests in simulating extremely harsh environments before leaving our ARCCAPTAIN factory that conforms to the high standards.
- 6 in 1 Welding Machine: The multi-function welding machine included Gas/Solid Wire MIG, Gasless Flux Core MIG, Stick/MMA, Spot welding, Lift TIG, spool gun compatible (tig gun and spool gun not included,WP-17V-35,LBT150).
- MIG Synergic Control: When you selecting wire diameter and gas material,the welder will automatically match recommended current and wire feed speed.So, it’s very easy for beginners.Also, if you are experienced welder, you can adjust the welding current according to your personal welding habit.
- Can Weld Aluminum:This Multi MIG welder can weld various of metals,It can not only weld stainless steel,alloy steel,iron but also can weld aluminum.It has two ways to weld aluminum, to install the teflon wire feed tube or use spool gun.
- Wide Application:Various Welding Wire Suitable,suitable for all kinds of welding requirements .023”/.030”/.035” solid wire, .023”/.030”/.035” flux core wire,.035”/.040”/.045” aluminum wire.
- Powerful And Safe Machine:This 250A Welding machine can weld mild up to 14.0mm plate,equipped with overload / over-voltage/over-current/overheating system,feel free to use,it’s very safe.
- Intelligent LCD panel provides welding data display and helps you read it clearly.
- Up to 135A output current that can weld mild steel up to 1/8 inch (3.0mm) plate.Suitable for .030” & .035” flux core welding wire.
- Multi-functions in one machine,can be used to Flux MIG / Stick /Lift TIG(need buy extra Lift TIG Torch, not included)
- Synergic control, the wire feeding speed can be adjusted according to your needs.
- Powered by standard 110V household voltage.
- 3-IN-1 welder: The MIG145 MIG welder has multi-function for Gas/Gasless MIG, Lift TIG and Stick. Maximum current is 145 amps, supporting gasless flux-cored mig wire and solid mig wire, and can use 0.030"/0.035"/0.040" flux core wire size, 0.030" solid wire size. The flux core welder excels in welding stainless steel, carbon steel, and even thicker steel, meeting diverse welding needs.
- Digital Screen Display: We design this MIG welding machine with full new technology. MIG welder 110v/220v with LED digital screen display voltage, current, and other parameters. You do not need to remove the helmet to assess the equipment status. You can make real-time adjustments, enhancing efficiency and accuracy.
- Synergic Control: The 3 in 1 welder adopts IGBT and integrated wire feed technology to automatically match the recommended voltage and wire feed speed (current). At the same time, the user can also press the adjustment knob to individually adjusted the voltage±3V, making it accessible to both beginners and professionals.
- 110/220V Dual-Voltage: The gasless mig welder supports 110/220V dual voltage, automatically identifying the input voltage, and clearly display through the front panel indicator. This design enables the MIG welder to work seamlessly in different power environments, providing greater convenience and applicability.
- Portable & Powerful: The MIG welder weighs just 13.7 pounds, MIG torch is 8.2 ft long (Included torch head) and comes with a shoulder strap for easy carrying and outdoor use. Package includes 1×MIG145 MIG welder machine, 1×MIG torch, 1×Earth clamp, 1×Stick holder, 1×0.040" Flux cored wire, 1×0.030" Solid wire, 1×0.030"/0.035"/0.040" Contact tip, 1×0.030"/0.035" Wire feed rollers, 1×2 meters gas hose, 1×220V to 110V Wire adapter, 1×Shoulder strap, 1× User manual.
- 【EASY TO USE】: The welding machine has included with voltage control knob,wire speed adjustment knob and with synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. Even beginners can use it easily.
- 【POWERFUL AND SAGE WELDER MACHINE】: This 130A Welding machine can weld mild up to 3.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.Big enough to handle 2.2 pound rolls of wire.
- 【PORTABLE DESIGN】: Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want; It only weighs 8.6 lbs., so you can effortlessly take it as far as you can.
- 【WIDE APPLICATIONS】: It can be used with a wide variety of metals and alloys. Suitable for home users, DIY craft enthusiasts, beginners and small projects.
- 【PACKAGE INCLUDES】: 130 MIG welding machine; Mig torch; Ground clamp; Brush&Hammer; 1lb .030" flux cored welding wire; Contact Tip*2.
- 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose.
- Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it.
- Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 8.0mm.
- Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 1.0MM-8.0MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E6013.
- Powerful And Safe Machine:This 200A Welding machine can weld mild up to 8.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.
- 🔔【Versatile 4 in 1 Welding Machine】This multiprocess welding machine is perfect for MMA, Lift TIG, flux MIG, and gas MIG welding. Choose from 4 welding modes to suit your needs.
- 🔔【Synergic Control for Easy Use】Adjust the amperage or wire thickness and the voltage and wire feeding speed will automatically change. Even beginners can use it with ease.
- 🔔【Gas/Gasless Welding Options】Choose between Flux Core Wire (Gasless) or Solid Wire (Gas) welding. This welder can handle 2 lb and 5 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, with a maximum welding thickness of 4.5mm.
- 🔔【Lift TIG/ARC Welding Capabilities】Lift TIG is available with a TIG Torch that fits WP17V (not included in the package). TIG welding thickness ranges from 0.5MM-3MM, making it suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel, and more. Arc welding fits rods E7018, E6013.
- 🔔【Powerful and Safe】 This 200A welding machine can weld mild up to 4.0mm plate and is equipped with an overload and overheating system, making it safe to use.
- GASLESS FLUX-CORED MIG WELDER: Intelligent synergic MIG control, adjusting the amperage or choosing different wire thicknesses(.030/.035 inch flux core wire), the voltage and wire feeding speed will automatically change. Maximum output 145A allows you to weld plates up to 1-5mm thick, can handle 2.2 pound rolls of wire, it is ideal for a learning/entry level welder.
- SUPERIOR WELDING PERFORMANCE: The welding machine is equipped with 110V/220V dual voltage(come with conversion wire 110V female to 220 male plug), it can automatically match when switching voltage. Welding one-time molding, no slag, no polishing. Its efficiency is 30% higher than traditional arc. Get better welds with less work, being powerful and efficient.
- COMPACT AND PORTABLE: HZXVOGEN MIG145 mini welder machine weighs only 9 lbs/4.5 kg. The portable handle makes it easier to operate, and the lightweight design makes it more convenient to carry. It's perfect for any garage work or outdoor projects.
- VERSATILE WELDING: The wire feed welder is capable of welding all kinds of metals, including iron, carbon, steel, and other materials, making it an excellent choice for household welding, DIY projects on steel, and other welding applications that require a MIG welder.
- SAFE AND CONVENIENT: Built-in overheating and overcurrent automatic protection function which effectively protects the internal circuit of the welder from damage, extend the service life of the machine. Plus, we provide a 30-Day Money Back Guarantee and 2-Years Warranty for you.
Last update on 2024-06-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
IMPORTANT SAFETY RECALL
October 14, 2022 Williamsen-Godwin Truck Body Co ATTN: Val Sorensen
1925 W. Indiana Ave.
Salt Lake City, UT 84104 Dear Sir or Madam,
Re: Safety Recall – Smart-Steer 2.0 Self-Steer Axle with 702887 Steer Arm Dexter Trailer Products of Canada Corporation (“Dexter Canada” (Ingersoll Axles)) has determined that ce1tain self – steer axles installed or distributed by your company may contain a defect which could be a safety risk under certain conditions or applications. Accordingly, a recall (NHTSA ID 22£-080) to address this issue was initiated effective September 21, 2022. This potential defect and the remedy are detailed in the attached Service Bulletin SB015 dated September 21, 2022. The affected axles aremodels ofthe Smart-Steer 2.0 self-steering axle with the 702887 bolt-on steer arm built from October 13, 2017 to October 30, 2022. Dexter Canada has determined that under ce1tain heavy loading conditions the steer arm attached to the knuckle can potentially shear. If this condition occurs, the upper section of the sheared steer arm will remain attached to theknuckle by themounting boltsand lower section ofthe steer arm will remain attached to the tie-rod assembly but potentially drag along the ground. At no time will the vehicle become uncontrollable and the operator will be able to safely operate until they can secure the axle under the vehicle. The repair, which is outlined in the Service Bulletin SB015 (attached), must be performed at a Dexter Canada authorized facility and will be at no cost to the owner (Dexter Canada will pay the cost of the prescribed repair). Please provide all known owners ofyour trailers which contain an affected axle with a recall notice with the specific instructions for the repair, as well the locations and contact information for authorized repair facilities. Your assistance with this matter is appreciated. Should you have any questions please contact Phil SchnurT directly at 226-242-5345 or email RecallSB015@dextergroup.com.
Sincerely, R.W. Gelven,
VP of Product Engineering and Product Innovation
160 In ersoll Str._eet !i_outh • In ersoll Ontario NSC 3J7 • Phone: 712 737-4865 • www.dexteraxte.com
A OEXKO GLOBAL COMPANY • TOGETHER IS BETTER Customer name1 Conf.0ate SO# PO# Variant
Williamsen-Godwin Truck Body Co
Williamsen-Godwin Truck Body Co ,::.·
DEXTER SERVICE BULLETIN #S8015 Page 2 of 3 I Affected Smart-Steer 2.0 Axle Models with 702887 Steer Arm
750001 751667-1 752191 761438
750020 751684 752212 762180
750022 751776 752212-2 770001T
750022-1 751778 752252-1 771355
750023 751824 752267 771438
750029 751869 752267-1 771438-2
750030 751869-1 752267T 771776
750033 751869T-2 752267T-1 771776T
750037 751892 752271 771778
750048 751908 752290T 771869
750052 751908-T 752381 771869T
750063 752177 752474-1 772177E
751355 752178 752643 772177T
751438 752180 752722T 772178T
751438-2 752180-1 752743 772180
751438T-2 752180T 752751 772191
751638-2 752180T-2 752751T 772252T-1 The model number can be found in the ordering variant description. Replacement steer arm kit for these models is 703294-01 and contains: -t:”}’t. m ¥umh !-:;_] :- ·g _ n!i -_- -L-•fNu ii_iij ) :e c_r PJ!oii- J – – ‘ 1
2
3
4
Not shown 1 703293-LH
1 703293-RH
4 703100
4 701810
1 0150425 B/0 steer arm LH B/0 steer arm RH
BOLT 3/ 4-16UNF 3.25″1g GR8 Yellow Zinc (VMI) WASHER FLAT.75″ MC2 GR8 (VMI)
LOCTITE®, BLUE 242,0.5ml Dexter Axle Company Phone: (574) 295-7888 2900 Industrial Parkway East www.dexteraxle.com Elkhart, IN 46516
Fax: ( 5 7 4) 295-8666 1::,·
DEXTER ‘I
SERVICE BULLETIN #S8015 Page 2 of 3 ,_. – – – — – ,– “.. -·— –..,. – – –
j Affect d Sm rt-Ste r 2.0 Axle Models with 702887 Steer Arm :….. – — – – :r””!. ,- ‘ 750001
750020
750022
750022-1
750023
750029
750030
750033
750037
750048
750052
750063
751355
751438
751438-2
751438T-2
751638-2 751667-1
751684
751776
751778
751824
751869
751869-1
751869T-2
751892
751908
751908-T
752177
752178
752180
752180-1
752180T
752180T-2 752191
752212
752212-2
752252-1
752267
752267-1
752267T
752267T-1
752271 ·
752290T
752381
752474-1
752643
752722T
752743
752751
752751T 761438
762180
770001T
771355
771438
771438-2
771776
771776T
771778
771869
771869T
772177E
772177T
772178T
772180
772191
772252T-1 The model number can be found in the ordering variant description. Replacement steer arm kit for these models is 703294-01 and contains:
LJQtiantity¾'”ftlIf;;:a· rtmber .JDiicripfioit:” J-·:- – – -.–: -·_.
1 1 703293-LH B/0 steer arm LH
2 1 703293-RH B/0 steer arm RH – -; 3 4
4 4
Not shown 1 703100
701810
0150425 BOLT 3/4-16UNF 3.25″1g GR8 Yellow Zinc (VMI) WASHER FLAT .75″ MC2 GR8 (VMI)
LOCTITE®, BLUE 242, 0.5ml Dexter Axle Company Phone: (574) 295-7888 2900 Industrial Parkway East www.dexteraxle.com Elkhart,IN 46516
Fax: (574) 295-8666 •
1::,·
DEXTER
SERVICE BULLETIN #5B015
Page 3 of 3
[ _- Ste r Ar Welding Specifica ns_ _ _
Dexter Axle Company Phone: (574) 295-7888
NOTE:
SOME ITEMS WERE REMOVED FOR CLARITY
2900 Industrial Parkway East www.dexteraxle.com
NOTE:
GRIND 3/16.X 45• CHAMFER BEFOREINSTALLING STEER ARM
Elkhart, IN 46516
Fax: (574) 295-8666
**************************************************************************************************************
From: Joey Gabardi
To:
Subject: recall notice
Attachments: image001.png
SKM C36422103109190.pdf
Here you go. Let me know what you want to do, and we can work together to get this resolved.
Thank you, Joey Gabardi. Office: Direct:
Cell:
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-099
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Williamsen-Godwin Truck Body Company LLC DEC 14, 2022 NHTSA Recall No. : 22E-099 Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Williamsen-Godwin Truck Body
Company LLC
Address : 1925 west Indiana Ave
Salt Lake City UT 84070 Company phone : 8019739400
Population :
Number of potentially involved : 12 Estimated percentage with defect : 100 %
Equipment Information : Brand / Trade 1 :
Model : WILLIAMSEN-GODWIN WPED5W-SL2255 Part No. : STEERING AXLE Size : NR Function : NR
Descriptive Information : RECALL NOTICE CAME FROM DEXTER AXLE Production Dates : APR 01, 2021 – JUN 18, 2021
Description of Defect :
Description of the Defect : STEER ARM
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : STEER ARM CAN SHEAR UNDER HEAVY LOAD Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 22E-099 Page 2 Component Name : SMART STEER 2.0 SELF STEERING AXLE
Component Description : 25K SELF STEERING AXLE Component Part Number : SSA750048-NPA-ACRD-22.5B Component Name : NR Component Description : NR Component Part Number : NR Component Name : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer
Name : DEXTER CANADA (INGERSOLL AXLES) Address : 160 INGERSOLL STREET SOUTH
ONTARIO Foreign States N5C3J7
Country : Canada Chronology :
INFORMATION WAS PROVIDED BY DEXTER RECALL # NHTSA ID 22E-080 Description of Remedy :
Description of Remedy Program : NR How Remedy Component Differs NR from Recalled Component :
Identify How/When Recall Condition NR was Corrected in Production : The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 22E-099
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR Address : NR
NR Country : NR Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-099
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Williamsen-Godwin Truck Body Company LLC APR 18, 2023 NHTSA Recall No. : 22E-099 Manufacturer Recall No. : 22E-080
Manufacturer Information :
Manufacturer Name : Williamsen-Godwin Truck Body
Company LLC
Address : 1925 west Indiana Ave
Salt Lake City UT 84070 Company phone : 8019739400
Population :
Number of potentially involved : 12 Estimated percentage with defect : 100 %
Equipment Information : Brand / Trade 1 :
Model : WILLIAMSEN-GODWIN WPED5W-SL2255 Part No. : STEERING AXLE Size : NR Function : NR
Descriptive Information : RECALL NOTICE CAME FROM DEXTER AXLE Production Dates : APR 01, 2021 – JUN 18, 2021
Description of Defect :
Description of the Defect : STEER ARM
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : STEER ARM CAN SHEAR UNDER HEAVY LOAD Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 22E-099 Page 2 Component Name : SMART STEER 2.0 SELF STEERING AXLE
Component Description : 25K SELF STEERING AXLE Component Part Number : SSA750048-NPA-ACRD-22.5B Supplier Identification : Component Manufacturer
Name : DEXTER CANADA (INGERSOLL AXLES) Address : 160 INGERSOLL STREET SOUTH
ONTARIO Foreign States N5C3J7
Country : Canada Chronology :
10/19/2022 INFORMATION WAS PROVIDED BY DEXTER FOR RECALL # NHTSA ID 22E-080
10/31/2022 EMAILED THE RECALL INFORMATION PROVIDED TO CUSTOMER.
11/16/2022 NOTIFIED BY NTHSA ABOUT THE RECALL, SIGNED UP ON THE PORTAL.
12/15/2022 NOTIFIED OUR ACCOUNT WAS SET UP AND APPROVED AND BEGAN THE FILLING
12/21/2022 RECALL PROCESSED
3/15/2023 OWNER LETTER SENT TO CUSTOMER Description of Remedy :
Description of Remedy Program : SERVICE WORK WILL INCLUDE THE FOLLOWING STEPS (PER SB015)
1. REMOVE THE EXISTING STEER ARMS AND MOUNTING HARDWARE.
2. CLEAN MOUNTING SURFACE AND SURROUNDING SURFACES TO PREPARE FOR MOUNTING OF THE NEW BOLT-ON STEER ARM AND ADDITIONAL WELDS.
3. GRIND A 3/16″ CHAMFER ALONG THE MOUNTING FACE EDGE (SEE PAGE THREE FOR LOCATION AND DETAIL).
4. MOUNT NEW DESIGN STEER ARMS (PART #703293-LH/RH) WITH SUPPLIED HARDWARE AND TORQUE TO 400 FT-LBS
5. ADD WELDS AS SHOWN ON PAGE THREE OF THIS BULLETIN How Remedy Component Differs from Recalled Component : NEW DESIGN HAS HIGHER STRENGTH MATERIAL AND WELDED TO THE STEERING KNUCKLE The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 22E-099
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Identify How/When Recall Condition was Corrected in Production :
IMPLEMENTED A NEW DESIGN WITH HIGHER STRENGTH MATERIAL AS WELL AS AN ADDITIONAL WELD CONNECTING THE ARM TO THE KNUCKLE INTO PRODUCTION AT DEXTER CANADA ON 30-OCTOBER-22 Recall Schedule :
Description of Recall Schedule : CUSTOMER WILL BE CONTACTED DIRECTLY TO HAVE UNITS BROUGHT IN TO HAVE THE RECALL COMPLETED.
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : DEC 15, 2022 – JUN 01, 2023 Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR Address : NR
NR Country : NR Company Phone : NR
* NR – Not Reported
SEOCONTENT-END