“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18E017
Manufacturer Timoney Technology
Components SUSPENSION
Potential Number of Units Affected 146
Front Axle Spindle may Fracture
If a wheel separates from the vehicle, it can increase the risk of a crash.
Summary
Timoney Technology (Timoney) is recalling certain Mark 1 and Gen 2 Independent Front Suspensions (IFS). Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle.
Remedy
Timoney will notify the vehicle manufacturers that purchased the affected suspensions, and those manufacturers will conduct recalls of their own with their dealers replacing the front axle spindle, free of charge. The recall is expected to begin April 2018.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Acknowledgement
April 5, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18E017-7721.pdf
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Protects Against Severe Temperatures To Help Extend Service Life
- Formulated With Extreme-Pressure Additives To Minimize Gear Wear From Shock Loads
- Helps Protect Against Gear Wear From Scuffing, Scouring, Corrosion And Pitting
- Recommended For Conventional Hypoid Differentials And Non-Synchronized Manual Transmissions In Passenger Cars, Light Trucks, Sport Utility Vehicles, Vans And Heavy-Duty Trucks Where An Api-Gl5 Or Gl-4 Fluid Is Specified
- Sinopec GL-5 Heavy Duty Automotive Gear Oil is a range of high-performance gear oils, available in six viscosity grades, formulated with high-quality mineral base oils, and an advanced multifunctional additive system to meet the requirements of API GL-5. Designed for the lubrication of hypoid gear sets in passenger vehicles and commercial vehicles, where they offer excellent extreme pressure (EP) and anti-wear properties.
- Certifications: API GL-5, MIL L-2015D, MAN 343 Type M1, ZF TE_ML 05A, TE-ML 19B, TE-ML 21A
- Pack Size: 5 Gallon Pail (18L Volume)
- Meets warranty requirements and is recommended for conventional and limited-slip differentials of passenger cars, light trucks, vans and buses
- Formulated for automotive use
- Use according to owner guide recommendations
- Recommended by Ford Motor Company
- Motorcraft SAE 80W-90 Premium Rear Axle Lubricant is an excellent multi-purpose extreme pressure lubricant
- WIDEST SPEC RANGE ON THE MARKET - Widely compatible with a very large number of hypoid gear systems, differentials, transmissions and axle assemblies from VOLVO, Mack, MAN, ZF, EATON, and many others.
- SEVERE SERVICE MAX - Exceptional shear stability and oxidation resistance. Polyphosphate EP proprietary additive system offers a substantial improvement in performance over the previous generation, low cost, gear oils.
- BUILT-IN LIMITED SLIP ADPAK - Does not require "additional" LS additive. It is built into the product and optimized for all limited slip differentials including those with built-in wet brakes.
- OUTSTANDING SCUFFING PROTECTION - Superb gear and syncron protection, facilitating extremely long transmission life. Exceeds Load Stage 13 extreme pressure requirements beyond 120,000 lbs / sqi.
- SHEAR STABLE - Excellent thermal stability and high load capacity without viscosity breakdown which facilitates excellent film strength under high loads, high temp and high shear conditions.
- Product Type :Auto Accessory
- Package Dimensions :8.89 Cm L X10.922 Cm W X30.48 Cm H
- Country Of Origin :United States
- Package Weight :2.0Lbs
- Excellent thermal stability and resistance to high temperature oxidation
- Good protection against low speed/high torque wear and against high speed scoring
- Excellent rust, staining, and corrosion protection
- Effective low temperature lubrication
- Good resistance to foami
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.