Sharp Cabinet Handles May Cause Injury – 2021-2022 Winnebago Hike, Minnie, & 2021 Micro Minnie Travel Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

November 29, 2022 NHTSA CAMPAIGN NUMBER: 22V883000

Sharp Cabinet Handles May Cause Injury

Edges on cabinet door handles could be sharp, increasing the risk of injury.

 

NHTSA Campaign Number: 22V883000

Manufacturer Winnebago Towable

Components EQUIPMENT, STRUCTURE

Potential Number of Units Affected 6,553

 

Summary

Winnebago Towable (Winnebago) is recalling certain 2021-2022 Hike, Minnie, and 2021 Micro Minnie travel trailers. The cast aluminum pull handles on the cabinet doors and drawers may have sharp edges.

 

Remedy

Dealers will replace the old door handles, free of charge. Owner notification letters were mailed February 9, 2023. Owners may contact Winnebago customer service at 1-574-825-5280 ext. 5220.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Safety Recall # 22V-883

 

REPAIR 

INSTRUCTIONS:   Replace the cast aluminum square edged handles on the cabinet doors and drawers with a handle with a rounded profile.

 

PARTS: Part number 274917 is single quantity, please order the needed quantity for unit.  Screws can be reused from original handles.     

 

Repair Instructions

Recall 22V-883

Tools Needed: Tape measure, Philips’s screwdriver, drill with 1/16” drill bit, screw gun (optional)   

 

Step 1:

Measure to the center of the existing handle from the closest edge of the door or drawer. Mark the position with a pencil mark or small piece of tape.

 

Step 2:

Using a screwdriver or screw gun, remove the standard equipped handles. Save the screws to reuse on replacement handles.

 

Step 3:

If using a screw gun, skip to step 5. Position the replacement handle in the desired position and mark the screw holes with a light pencil mark. Be sure the underside of the replacement handle is tight against the lip of the door or drawer.

 

Step 4:

Measure 3/8” from the tip of the drill bit and place a piece of tape to mark the depth. Do not drill any deeper or you may risk breaching the face of the door or drawer.

 

Step 5:

Using a screw gun or Phillip’s screwdriver, attach the replacement handle with the screws removed from the original handle.

 

Step 6: 

Puddy old screw holes on doors as desired. Complete.                   

 

201 14th Street, Middlebury, In 46540
Phone: 574-825-8052, wtowWarrantyTech@winnebagoind.com
Winnebago.com

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [156.94 KB]

 


Chronology :

In late 2021, Grand Design investigated reports of a personal injury related to sharp cabinet drawer handles. A subsequent recall was conducted in early 2022 to replace the handles. In late September 2022, it was identified that there may be similar injury claims on some Winnebago Towable products and a subsequent investigation was initiated. Upon investigation, it was determined that for a period of time, Winnebago Towables used a similar style cabinet drawer handle. The part numbers for the drawer handles were different, however the design was similar. After determining the scope of the products built with suspect handles and reviewing the nature of the relevant claims, the product safety committee met to review the findings. On 11/21/22 the Product Safety Committee decided that the issue presented a risk to motor vehicle safety and therefore decided a recall was necessary.

There are 17 known injuries (cuts/scrapes to arms and legs) with the first identified case occurring in October 2020.

 


5 Affected Products

Vehicles

MAKE MODEL YEAR
WINNEBAGO HIKE 2021-2022
WINNEBAGO MICRO MINNIE 2021
WINNEBAGO MINNIE 2021-2022

 


9 Associated Documents

Recall Acknowledgement

RCAK-22V883-4716.pdf 700.251KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [683.84 KB]

 


Defect Notice 573 Report

RCLRPT-22V883-2035.PDF 214.095KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.08 KB]

 


Remedy Instructions and TSB

RCRIT-22V883-0280.pdf 160.704KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [156.94 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-22V883-6651.pdf 131.637KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [128.55 KB]

 


Recall 573 Report – 1/27/2023

RCLRPT-22V883-2753.PDF 214.158KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.14 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V883-9291.pdf 49.267KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [48.11 KB]

 


Recall Quarterly Report #1, 2023-1

RCLQRT-22V883-5557.PDF 211.127KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.18 KB]

 


Recall Quarterly Report #2, 2023-2

RCLQRT-22V883-4366.PDF 211.227KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.28 KB]

 


Recall Quarterly Report #3, 2023-3

RCLQRT-22V883-9521.PDF 211.45KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.49 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V883&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
Ravinte 30 Pack | 5 Inch Cabinet Pulls Matte Black Stainless Steel Kitchen Drawer Pulls Cabinet Handles 5 InchLength, 3 Inch Hole Center
  • Risk-free 365 Days trail:We're confident you 'll love your Ravinte handles,So we give you 365 days to try it on us or pick it up and give you a full refund.
  • MODERN: Functional & elegant, These Matte Black pulls suitable for different styles of cabinets, wardrobe, chest and cupboard.
  • Enduring & STRONG: 30 bar pulls made of stainless steel finished with classic matte black coordinates well with other appliances and accessoriess.
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
  • [MEASUREMENT]: Hole centers(CC):3 inch(76mm), Total Length:5 inch(127mm), Diameter:1/2 inch(12mm) Projection:1-1/4 inch(32mm)
SaleBestseller No. 2
Ravinte 30 Pack 5'' Cabinet Pulls Brushed Nickel Stainless Steel Kitchen Drawer Pulls Cabinet Handles 3" Hole Center
  • Risk-free 365 Days trail:We're confident you 'll love your Ravinte handles,So we give you 365 days to try it on us or pick it up and give you a full refund.
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 3 inches. Installing new cabinet handles, drill two holes with center to center spacing of 3 inches.
  • ENDURING & STRONG: 30 bar pulls made of stainless steel finished with classic satin nickel coordinates well with other nickel appliances and accessoriess.
  • Simple look: The Brushed Nickel cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Satin Nickel handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
  • [MEASUREMENT]: 3 inch(76mm), Total Length:5 inch(127mm), Diameter:1/2 inch(12mm) Projection:1-1/4 inch(32mm)
SaleBestseller No. 3
homdiy 15 Pack Brushed Nickel Cabinet Pulls 3 Inch Handles Stainless Steel Cabinet Hardware for Kitchen and Bathroom Cabinets, 5 Inch Overall Drawer Pull
  • Measurements: 3 inch Center to Center with 5 in Overall Length..Please measure your cabinet HOLE CENTERS is 3in before you purchase cabinet handles.
  • Material: homdiy cabinet pulls made of high quality Stainless Steel with brushed nickel finished,hollow construction but durable and hard to get rusty
  • Simple But Classic: This brushed nickel cabinet pulls are simple but depending on your application, can be very key in bringing the design together. The arc of this nickel handle is round and it has no corners, which can effectively prevent your child from bumping and injured.
  • SCREWS: Free screws of 1in(25mm)& 1.57in(40mm) included are suitable for board thickness of cabinets.If you need other length screws, please feel free to contact us !
  • PERFECT SERVICE: Best quality and service is our goal, If you are not satisfied with this brushed nickel drawer pulls, please contact us. We promise to leave you without any worries, please buy with confidence.
SaleBestseller No. 4
Ravinte 30 Pack 5 Inch Kitchen Square Cabinet Handles Matte Black Pulls Drawer Hardware for Cabinets Cupboard
  • Risk-free 365 Days trail:We're confident you 'll love your Ravinte handles,So we give you 365 days to try it on us or pick it up and give you a full refund.
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 5 inches. Installing new cabinet handles, drill two holes with center to center spacing of 5 inches.
  • Size of cabinet hardware: Overall Length: 5-1/2 inch; Width: 1/2 inch;Thickness:1/2 inch;Projection: 1-2/5 inch; Screw-hole center: 5 inch.
  • Durable design& fine touch: With advanced technique, the drawer pulls is made to be long lasting, accompanied with good looking and fine touch.
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
Bestseller No. 5
JOY DECOR 30 Pack 5 Inch Cabinet Pulls Kitchen Cabinet Handles with 3 Inch Hole Center Matte Black Cabinet Hardware Stainless Steel Kitchen Drawer Pulls for Cabinets Cupboard, 76mm Hole Centers
  • Exact Fit Dimensions: Hole centers at 3 inches (76mm), total length of 5 inches (127mm), diameter of 1/2 inch (12mm), and projection of 1-1/4 inch (32mm)
  • Durability You Can Trust: Our handles are crafted for long-lasting use, maintaining both look and functionality.
  • Contemporary Elegance: The black T-shaped design adds a modern touch to any cabinet, enhancing your space's aesthetic.
  • Installation Made Simple: Accompanied by two sizes of screws, these handles are designed for easy installation across different cabinet depths.
  • 365 Days of Risk-Free Satisfaction: Reach out to us for any quality concerns or installation support. With a 378-day trial, you can return the handles with ease if they don't meet your expectations.
Bestseller No. 6
Ravinte 30 Pack Solid 3 Inch Center to Center Slim Square Bar Drawer Handles Kitchen Cabinet Handles Black Drawer Pulls Kitchen Cabinet Hardware Kitchen Handles Matte Black Cabinet Pulls
  • Size of cabinet hardware:Screw-hole center: 3 inch(76mm). Overall Length:3-5/16 inch(85mm); Width: 11/32 inch(9mm);Projection: 1-3/32 inch(28mm);
  • Risk-free 365 Days trial: We're so confident you'll love this cabinet pulls that we're offering you a 365-day trial to try it, if it does not perform to your satisfaction, return it for replacement or full refund.
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 3 inches(76mm). Installing new cabinet handles, drill two holes with center to center spacing of 3 inches(76mm).
  • DURABLE & STRONG: The solid and sturdy 30 bar pulls made of Zinc finished with classic matte black coordinates well with other appliances and accessories.
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
SaleBestseller No. 7
Ravinte 30 Pack Solid 5 Inch Kitchen Square Cabinet Handles Matte Black Cabinet Pulls Drawer Pulls Kitchen Cabinet Hardware Flat Black Kitchen Handles
  • Risk-free 365 Days trial: We're so confident you'll love this cabinet pulls that we're offering you a 365-day trial to try it, if it does not perform to your satisfaction, return it for replacement or full refund.
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 5 inches(128mm). Installing new cabinet handles, drill two holes with center to center spacing of 5 inches(128mm).
  • DURABLE & STRONG: The solid and sturdy 30 bar pulls made of Zinc finished with classic matte black coordinates well with other appliances and accessories.
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
  • Size of cabinet hardware: Screw-hole center: 5 inch; Overall Length: 5-3/8 inch; Width: 15/32 inch;Thickness:3/10 inch;Projection: 1 inch.
Bestseller No. 8
Ravinte 30 Pack 1-1/4 inch Kitchen Cabinet Knobs Drawer Dresser Knobs Matte Black Zinc, Drawer Pulls Door Handles Knobs
  • Risk-free 365 Days trial: We're so confident you'll love this cabinet knobs that we're offering you a 365-day trial to try it, if it does not perform to your satisfaction, return it for replacement or full refund.
  • EURO-STYLE: The cabinets knobs is an ideal way to beautify an entire room. Make cabinet hardware a part of your home décor today
  • Size of round Knobs:Diameter 1-1/4“ ; Base Diameter: 3/4" ; Height: 7/8"
  • Durable design& fine touch: With advanced technique, the door pulls are made to be long-lasting, accompanied with good looking and fine touch.
  • Simple look: The Black cabinet knobs have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black knobs have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
Bestseller No. 9
Ravinte 30 Pack 6-1/4 Inch Kitchen Square Cabinet Handles Matte Black Stainless Steel Drawer Pulls Hardware
  • Risk-free 365 Days trail:We're confident you 'll love your Ravinte handles,So we give you 365 days to try it on us or pick it up and give you a full refund.
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 6-1/4 inches(160mm). Installing new cabinet handles, drill two holes with center to center spacing of 6-1/4 inches(160mm).
  • Size of cabinet hardware: Overall Length: 6-3/4 inch(172mm); Width: 1/2 inch;Thickness:1/2 inch;Projection: 1-2/5 inch; Screw-hole center: 6-1/4 inch(160mm).
  • Durable design& fine touch: With advanced technique, the drawer pulls is made to be long lasting, accompanied with good looking and fine touch.
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
SaleBestseller No. 10
JOY DECOR 30 Pack Cabinet Knobs, Black Cabinet Handles, 2in Kitchen Cabient Knobs, Single Hole Drawer Knobs for Dresser Drawers
  • Durable Material: These cabinet knobs are crafted with stainless steel and finished with a matte black coating, ensuring durability for daily use. Drawer pulls and knobs are perfect for frequency using areas like kitchens and bathrooms, with exceptional strength and long-lasting performance.
  • Round Edge Design: Upgrade your kitchen with our round drawer knobs. Smooth, rounded knobs for cabinets and drawers add elegance to home renovation.
  • Easy Installation: Our black knobs offer two sizes (1" and 1-3/4") of M8-32 metric size machine screws. They fit most cabinets and are easy to install.
  • 365 Days of Risk-Free Satisfaction: We offer 365 days risk-free after-sales service so that you can order with confidence. JOY DECOR brings you a truly joyful decoration experience.
  • Measurements: Overall Length: 2 inch (50mm), Width: 1/2 in (12mm), Height: 1-2/5 inch (35mm). Cabinet knobs with single hole are easily installed by inserting a single screw.

Last update on 2024-04-18 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...