“This site contains affiliate links for which OEMDTC may be compensated” |
November 1, 2022 NHTSA CAMPAIGN NUMBER: 22V819000
Turn Signal Visibility/FMVSS 108/Petition
“See Notes”
NHTSA Campaign Number: 22V819000
Manufacturer Mack Trucks, Inc.
Components EXTERIOR LIGHTING
Potential Number of Units Affected 27,544
Summary
Mack Trucks, Inc. (Mack) has notified NHTSA that certain 2015-2023 GU and GR vehicles fail to comply with the requirements of Federal Motor Vehicles Safety Standard (FMVSS) number 108, “Lamps, Reflective Devices, and Associated Equipment.” Vehicles are non-compliant with the updates to turn signal visibility. Mack believes this noncompliance does not affect vehicle safety.
Remedy
“See Notes”
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
During a new project, questions were raised relative to some current hood designs August 3, 2021.
Investigation opened, September 20,2021, escalated to Product Safety Working Group for evaluation October 14, 2022 with findings from investigation. Product Safety Working Group meets October 19, 2022 recommends that a non-compliance be raised to Product Safety Committee and that a request of a petition for inconsequential to safety be filed. Product Safety Committee meets October 27, 2022 and makes the decision that noncompliance exists and that a petition for in-consequential noncompliance will be filed.
18 Affected Products
Vehicles
MAKE | MODEL | YEAR |
MACK | GRANITE (GR) | 2015-2023 |
MACK | GRANITE (GU) | 2015-2023 |
2 Associated Documents
Recall 573 Report-Amendment 1 – 11/03/2022
RCLRPT-22V819-9175.PDF 213.322KB
22V819, Petition for Inconsequential Non-compliance, MVSS 108, 6.4.3 Turn Signal Visibility November 23, 2022
RMISC-22V819-8514.pdf 965.135KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V819&docType=RCL
- 【Durable Material】: Our motorcycle turn signals are made of ABS material, which is wear-resistant, lightweight, and IP67 waterproof. So it's perfect for riding on the road and will keep you safe even in rainy or stormy weather.
- 【Super Bright】: This motorcycle indicator uses the latest upgraded LED, not only has a super brightness and lower power consumption than traditional lights. They can be used as turn signal lights, DRL lights, and brake Light, provides you more on-road warning lights options.
- 【Flowing Light Mode】: We use a unique LED flow design to make the turn signals more effective to attract the eye. It is dazzling but does not dazzle other people's eyes. Warm tip: If the running turn signal wiring appears after it is only half bright or flashing too fast, is the flashers caused. You just need to remove the flasher or replace it with a speed-adjustable flasher to solve the problem.
- 【Universal Turn Signal Lights】: Compatible with the most popular makes and models of motorcycle motocross bikes such as Honda, Yamaha, Suzuki Kawasaki, BMW, DUCATI, BUELL, APRILI and many more.
- 【Best Service】: Customer satisfaction is our top priority. If you have any questions, please feel free to contact us. We will solve your problem in the first time to ensure your best shopping experience.
- Ultra Bright Brightness: mini stalk arrow light motorcycle turn signals lights is very small, with beautiful LED lights; It is composed of 14 ultra high brightness amber LED lights, which makes it safer to ride motorcycles at night; Note: please confirm that the size meets your needs before purchasing
- Package Contents: you will receive 4 pieces motorcycle indicators flowing turn signal lights, black shell, amber lights, the number of turn signals is enough to meet your motorcycle's daily using and replacement, you can also share them with your friends, lover, and family member
- Parameter Information: the working voltage: voltage of motorcycle lamp: 12V; Power: about 1.5W; Color temperature: 3500K; Service life: 50000H, can provide efficient and continuous brightness, and please check the related data carefully before buying; Note: the installation voltage cannot exceed 14V, the normal voltage is 12v
- Convenient to install: motorbike LED indicator blinker amber lamp is simple and easy to install and can be directly bolted for general installation; It only takes a few minutes to complete the installation, allowing your motorcycle to emit bright lights in the dark
- Good compatibility: the motorcycle indicators flowing turn signal lights are compatible with a variety of 12 V locomotives, straddle locomotives, motorcycles, electric vehicles, ATVs, off-road motorcycles, cars, etc., practical enough to meet you a plenty of using needs
- Compatibility: Suitable for most 12V motorcycles. Note: some models require a load resistor or flasher relay when replacing turn signal Light
- High Quality: Our product features an aluminum alloy casing that is wear-resistant, shock-resistant, and easy to dissipate heat
- IP67 Protection: Waterproof and dustproof, unaffected by harsh weather conditions, and extends the lifespan of the LED
- Easy to Install: Black Wire is Negative, Red Wire is Turn Signal Light
- Professional Service: We are committed to providing good customer experience, if you have any questions about our product, please do not hesitate to contact us
- ⭐ 【Super Bright Amber Lamp】 This motorcycle turn signals has 14 super bright LED lights built-in, and the lights present a brilliant amber color, making it very suitable for handsome motorcycle modification. The appearance of the motorcycle turn signals LED adopts a mini arrow design, resembling two flashing small eyes, providing guarantee for your safe driving.
- ⭐ 【Widely Compatible】 Motorcycle blinkers are suitable for most 12V motorcycles, scooters, and dirt bike with 10mm mounting holes. It is compatible with 2003-2019 CBR600RR, 2004-2019 CBR1000RR; Yamaha 2006 YZF-R6S, 1998-2019 YZF-R1; Kawasaki 2004-2017 ZX1000; Suzuki 1992-2019 GSX-R600, 2001-2017 GSX-R1000. (Including but not limited to the above models.)
- ⭐ 【Turn signal Specifications】 The voltage of the motorcycle turn signal lights is 12V, the power is 2W, the color temperature is 3500K, and the service life is 50000H. Each of our scooter turn signal lights housings is made of premium ABS, with a waterproof rating of up to IP67, which can withstand various adverse weather conditions.
- ⭐ 【How to Install】 The installation of motorcycle turn signal lights are very simple and can be easily completed in a few minutes. You only need to use the bolt assembly to secure the turn signal to use. When connecting cables, please pay attention to connecting the black cable to the negative pole and the yellow cable to the positive pole.
- ⭐ 【Perfect After-Sales Service】 We care about our valued buyers, and each of our motorcycle lights is carefully tested and inspected before delivery. If you have any questions about the performance or installation of the product, our customer service personnel will be happy to assist you.
- 【Compatibility】: Universal fit most street standard custom bike cruiser bobber chopper scooter dirt bike with 10mm mounting bolt. Such as compatible with Honda Rebel / Interstate / Fury / Shadow (NOTE: NOT fit Honda Magna,1980-1990 Honda Shadow!!!), Harley, Kawasaki, Suzuki, Yamaha, Triumph and other brands 12V motorbikes.
- 【Top Material】: Our motorcycle turn signals are made of high quality steel and ABS housing. The delicate chrome finish makes it look very fine and makes your car more beautiful. The IP67 waterproof plastic is very resistant to damage and can work even when traveling in heavy rain.
- 【Unique Shape & Super Bright】: We have adopted a very unique exterior design, with high brightness halogen bulbs and a round lampshade to make it look very different and beautiful. This amber motorcycle turn signal can be used as a front and rear turn signal for your front and rear lighting needs. It illuminates brighter than other bulbs, greatly improving visibility and making your driving safer.
- 【Quick Installation】: Two installation methods. If your original blinkers' mounting bolt is 10mm, just remove your stock turn signal light and install the new light on where the old one was removed. Or drill an 10mm hole on where you to mount the new turn signals to DIY your motorcycle.
- 【Package Includes】: You will get 4 motorcycle turn signals, which will be enough for your needs. We will try our best to provide customer good quality at great cost and create you a more enjoyable driving experience. If you have any questions, please feel free to contact us, we will reply as soon as possible.
- 【New Design】SEALIGHT newly design - J6 series LED bulb, fully wrapped transparent HD projector lens, 360° illumination, light emanates through the HD lens, so that the light is softer and more uniform, brighter but not glare!
- 【Best Beam Pattern】3157 LED turn signal light bulb is 10W 1500Lumens brightness with amber yellow light,adopts 12PCS 3020 SMD LED chips with high brightness and perfect beam pattern,no blind spot,300% brighter than halogen.
- 【1: 1 Size】No-Polarity design and Plug & Play.No need for modification or flip, 1:1 same size with halogen, applied to US standard and CK sockets.Allowing for quick installation even if without installation experience.Installation Tips: If you experience difficulty inserting the bulb into the socket during installation, try pushing it in with a little force.
- 【Perfect Performance】3157 LED parking light bulb is built-in intelligent temperature control IC helps to dissipate heat efficiently with low power consumption, ensuring the 3156 3157 LED bulbs work for more than 50,000 hours.
- 【Fitment】3157 3156 LED bulb yellow can be used for turn signal bulb, side marker light bulb, blinker light bulb, parking lights, tail lights, etc. Fits for 3157, 3156, 3057, 4157, 3457, 4057, 3056, 4156, 3047, 3357 light bulbs.Amazon filter system may not be 100% accurate, the bulb size may vary between trim of your vehicle. Please double check owners manual or original bulb size to confirm.
- 【Fitment:】Universal fit for most motorcycles that have 8mm threaded bolt rear review mirror stem. Mounted under the bottom of clutch perch. Compatible with 1991-2017 Harley Dyna, 1983-2019 Electra Glide, 2010 Fatboy, 1988-2017 Heritage Softail, 2009-2019 Iron 883, 1998-2019 Road Glide, 1994-2019 Road King, 1986-2017 Softail, 1996-2019 Sportster 1200, 1999-2019 Sportster 883, 2006-2019 Street Glide, 1981-1996 Tour Glide, 2001-2019 Honda Goldwing 1800 and Yamaha Triumph Kawasaki
- 【Super Bright:】Built-in 6pcs high-intensity SMD led chips per turn signals, mini size but much brighter than factory halogen bulbs, bright light output makes you noticeable when driving to increase safety. Used as turn signal blinkers or marker lights (no both)
- 【Sequential Flashing:】The amber turn signal lights illuminate from one side to another side sequentially, flash like water flowing. Plug and play, easy Installation, 2 wire configuration, black wire connects to negative and red wire to positive, best replacement for stock front turn signals
- 【IP68 Waterproof:】Made from high quality PC lens and matte gloss metal housing. Sealed well on the edge, water tight and dustproof, stay illuminated in extremely hot, cold, rainy or snow days. Smoked lens and low profile design match up with your motorcycle perfectively
- 【Package Including:】1 pair mini led motorcycle turn signals front indicator. worry-free 360 days manufacture warranty, and friendly customer service
- Compatibility: 12V 12 LED Motorcycle Flowing Turn Signals Indicator Amber Light.
- High quality: Motorcycle turn signal is made of ABS plastic, which has high transparency and good wear resistance that guaranteed by quality; Flexible rubber connection base is not easy to break, effectively prevent fracture.
- Flowing Mode Performance: Amber Color Light with blendable Design, Flowing Mode Makes the Car More Upscale and Higher Attention.
- Easy to install: The black line is the negative pole and the red line is the positive pole. The black and red lines can be docked on the original car turn signal line. Besides, including bolt for stabilizing installation.
- Buy with confidence: The package contains 4 motorcycle flowing turn signals indicator amber lights. Any issues or questions please feel free to contact us, we are always here to satisfy all of you.
- Compatible with 2007-2017 Jeep Wrangler JK or Unlimited
- One pair (driver and passenger sides) dark/bl;ack smoke cover lens full LED turn signal light asssembly with CAN-bus decoders to prevent LED blinker from hyper flash
- Powered by amber yellow super bright LED for the signal blinker function and xenon white LED vertical beams for parking/position light (can also function as DRL daylight function)
- Give your Wrangler an upgrade a modern and dynamic LED appearance with enhanced safety & visibility at night
- Since the LED light has lower wattage, please make sure to install the provided load resistor decoder to prevent LED turn signal lighting from hyper flashing
- Compatibility:【LED turn signals inserts】It is LED turn signals fits for Harley with 2" bullet style models. ➵For Touring : Street Glide,Street Glide Special ,Road Glide ,Road Glide Special,Road King Special(Excluding CVO/Limited/Classic/Ultra) .➵For Sportster :Iron883, iron 1200, SuperLow 72 48,883R 1200T,1200 Low ect.
- Compatibility:【2 inches turn signals】➵for Dyna : Wide Glide, Street Bob, Low Rider , Fat Bob ect.➵For Softail :Sport Glide,Slim, Low Rider, Fat Boy, Fat Bob,Fat Boy S,Low rider S ect.
- Light Performance:【81 LEDS Extremely Bright】Switchback Design Lighting ,300% brighter than halogen bulbs.Front 1157 blinker available in two color, white for running light, amber for turn signals.Rear lights are red colors.This LED turn signals allows you to be more noticeable.it have a long life and fit the motorcycle system perfectly.
- Smoke Lenses:【Upgrade Versions and Excellent Light Transmission】Made of high-quality PC plastic with special protective coating, the signal lights lens cover can protect the turn signal light inside from being damaged by dust, dirt and other factors.Maintaining clear visibility without weakening the turn signals.
- Light Installation:【Plug-and-play and Integrated handle design】The LED turn signals are plug-and-play on models with front and rear bullet style housings.
Last update on 2024-06-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
pg. 1 November 23, 2022 Acting Administrator, Ann Carlson National Highway Traffic Safety Administration, 1200 New Jersey Ave., SE Washington, DC 20590; RE: 22V819, Petition for Inconsequential Non-compliance, MVSS 108, 6.4.3 Turn Signal Visibility Dear Ms. Carlson On behalf of Mack Trucks LLC, I respectfully submit this petition for your consideration. I appreciate yours and NHTSA’s consideration of this matter. A copy of this document has been uploaded to the recall portal under 22V819. Best regards, Emily Bishop Director, Vehicle Certification & Compliance Complete Vehicle, USA emily.bishop@volvo.com +1 301 5735972 7900 National Service Rd | Greensboro, NC, 27409 | USA | Volvo Group pg. 2 Information Required per 49CFR556 Full Name of Applicants: Mack Trucks LLC. 7825 National Service Road, Greensboro, NC 27409-9416 Nature of Business: Vehicle Manufacture, Corporation State: North Carolina Description of motor vehicles or items of motor vehicle equipment involved: • Brand: Mack • Models: Certain 2015-2023 GU/GR Class 8 trucks and truck-tractors • Manufacturing Dates: September 1, 2014-September 30, 2022 with different axle position and frame extension configurations. • Total number of vehicles involved: 27544 Description of non-compliance: This is issue is relative to the MVSS 108, 6.4.3 turn signal visibility. Based upon different axle positions and frame extension configurations, the forward turn signals on specific vehicles are not compliant with the 45 degree inboard and/or 15 degree downward angle relative to the September 2014 regulation update. S6.4.3 Visibility options. A manufacturer must certify compliance of each lamp function to one of the following visibility requirement options, and it may not thereafter choose a different option for that vehicle:(a) Lens area option. When a vehicle is equipped with any lamp listed in Table V-b each such lamp must provide not less than 1250 sq mm of unobstructed effective projected luminous lens area in any direction throughout the pattern defined by the corner points specified in Table V-b for each such lamp; or(b) Luminous intensity option. When a vehicle is equipped with any lamp listed in Table V-c each such lamp must provide a luminous intensity of not less than that specified in Table V-c in any direction throughout the pattern defined by the corner points specified in Table V-c for each such lamp when measured in accordance with the photometry test requirements of this standard. Table V-b—Visibility Requirements of Installed Lighting Devices—Lens Area Visibility Option Lighting device Corner points1 2 Required visibility pg. 3 Motorcycle All other Turn signal lamp 3 15° UP-20° IB 15° UP-45° OB 15° UP-45° IB 15° UP-45° OB Unobstructed minimum 15° DOWN-20° IB 15° DOWN-45° OB 15° DOWN-45° IB 15° DOWN-45° OB effective projected Stop lamp 15° UP-45° RIGHT 4 15° UP-45° LEFT 4 15° UP-45° IB 15° UP-45° OB luminous lens area 15° DOWN-45° RIGHT 4 15° DOWN-45° LEFT 4 15° DOWN-45° IB 15° DOWN-45° OB of 1,250 sq mm in any Taillamp 15° UP-45° RIGHT 5 15° UP-45° LEFT 5 15° UP-45° IB 15° UP-45° OB direction throughout 15° DOWN-45° RIGHT 5 15° DOWN-45° LEFT 5 15° DOWN-45° IB 15° DOWN-45° OB the pattern defined by Parking lamp No Requirement No Requirement 15° UP-45° IB 15° UP-45° OB the specified corner No Requirement No Requirement 15° DOWN-45° IB 15° DOWN-45° OB points. 1 IB indicates an inboard direction (toward the vehicle’s longitudinal centerline) and OB indicates an outboard direction. 2 Where a lamp is mounted with its axis of reference less than 750 mm above the road surface, the vertical test point angles located below the horizontal plane subject to visibility requirements may be reduced to 5° down. 3 Where more than one lamp or optical area is lighted at the front on each side of a multipurpose passenger vehicle, truck, trailer, or bus, of 2032 mm or more overall width, only one such area need comply. 4 If a multiple lamp arrangement is used for a motorcycle stop lamp, the inboard angle for each lamp shall be 10 degrees. 5 If a multiple lamp arrangement is used for a motorcycle tail lamp, the inboard angle for each lamp shall be 45 degrees. pg. 4 Description of the Non-Compliance In 2014, the MVSS regulation was updated for turn signal visibility. The updated regulation includes the requirement that the turn indicator should be visible on 45 degrees inboard and 15 degrees downwards. However, certain vehicle configurations within Volvo Group were not updated accordingly. As a result of an unrelated engineering change, Volvo Group identified that a non-compliance existed on certain vehicles where they were found to not be compliant with MVSS 108,6.4.3 turn signal visibility. The inboard and downward angle of compliance was non-compliant by 8 degrees inboard and 8 degrees downward. Please reference the below table to identify the degree per vehicle. Degrees Model Inboard Downward GU Axle Back 37 15 GR Axle Back 37 15 GU Axle Forward 45 7 GR Axle Forward 45 7 GU Axle Forward Extended Frame Rail 45 7 GR Axle Forward Extended Frame Rail 45 7 Table 1: Degree of non-compliance pg. 5 Illustration 1. GR/GU 7 (illustration 1) is the axle forward configuration of the Granite truck platform: When configured in with a bumper and extended (front) frame it is not compliant with the updated regulation. Illustration 2. GR/GU 8 illustration 2 is the axle back configuration of the Granite truck platform: pg. 6 Period of Exemption Requested: Mack is petitioning that all vehicles in the affected population be exempt from the recall requirements as the non-compliance is inconsequential to motor vehicle safety. Please feel free to contact me if you have any questions. Best regards, Emily Bishop Director, Vehicle Certification & Compliance Complete Vehicle, USA emily.bishop@volvo.com +1 301 5735972 7900 National Service Rd | Greensboro, NC, 27409 | USA | Volvo Group
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-819 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Mack Trucks, Inc. Submission Date : NOV 03, 2022 NHTSA Recall No. : 22V-819 Manufacturer Recall No. : n/a Manufacturer Information : Manufacturer Name : Mack Trucks, Inc. Address : 2100 Mack Boulevard PO Box M Allentown PA 18105-5000 Company phone : 610-709-2131 Population : Number of potentially involved : 27,544 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2015-2023 Mack GU/GR Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : The population was determined based on a study of front turn signal angle visibility. The different axle positions and frame extension configurations were evaluated for the 45 degree inboard and 15 degree downward angle regulation update. The population of vehicles includes trucks built from the effective change of the regulation until our production was corrected. Production Dates : SEP 01, 2014 – SEP 30, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : Vehicles are non-compliant with the updates to FMVSS 108, 6.4.3, turn signal visibility. FMVSS 1 : 108 – Lamps, reflective devices, and assoc. Equipment FMVSS 2 : NR Description of the Safety Risk : There is no safety risk. Description of the Cause : Failure to incorporate the changes to FMVSS 108, 6.4.3 into some chassis extensions and hood variations. Identification of Any Warning that can Occur : N/A Involved Components : Part 573 Safety Recall Report 22V-819 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Headlamp Component Description : Headlamp assy Component Part Number : 25105806 Supplier Identification : Component Manufacturer Name : Mack Trucks Address : NR NR Country : NR Chronology : During a new project, questions were raised relative to some current hood designs August 3, 2021. Investigation opened, September 20,2021, escalated to Product Safety Working Group for evaluation October 14, 2022 with findings from investigation. Product Safety Working Group meets October 19, 2022 recommends that a non-compliance be raised to Product Safety Committee and that a request of a petition for inconsequential to safety be filed. Product Safety Committee meets October 27, 2022 and makes the decision that noncompliance exists and that a petition for in-consequential noncompliance will be filed. Description of Remedy : Description of Remedy Program : n/a Mack is submitting a request for inconsequential non-compliance petition for consideration. How Remedy Component Differs from Recalled Component : Hood and lighting re-design meets the updated regulation. Identify How/When Recall Condition was Corrected in Production : Production in our manufacturing facilities was corrected effective 22 September, 2022 Recall Schedule : Description of Recall Schedule : n/a Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR Part 573 Safety Recall Report 22V-819 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END