“This site contains affiliate links for which OEMDTC may be compensated” |
June 1, 2022 NHTSA CAMPAIGN NUMBER: 22V391000
Fan Assembly may Separate from the Vehicle
Loose bolts may allow the fan assembly to detach from the vehicles, becoming a road hazard and increasing risk of a crash.
NHTSA Campaign Number: 22V391
Manufacturer Elgin Sweeper Company, Inc.
Components EQUIPMENT
Potential Number of Units Affected 120
Summary
Elgin Sweeper Company, Inc. (Elgin Sweeper) is recalling certain 2018-2022 RegenX vehicles. The fan assembly mounting bolts may have been improperly tightened.
Remedy
Dealers will install new mounting hardware, free of charge. Owner notification letters were mailed on June 27, 2022. Elgin Sweeper Customer Service Department at 1-877-DIAL-ESG (1-877-342-5374).
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
PURPOSE:
Certain RM (RegenX) sweepers may have Fan Housing Bolts that are improperly tensioned. FSO 1140232 must be installed on all affected sweepers.
SPECIAL TOOLS:
1/2” Torque Wrench calibrated and adjusted for 110 lb-ft.
PARTS REQUIRED:
Part No. | Qty. | Description |
1140232 | 1 | FSO – FAN HSG RETENTION |
PROCEDURE:
Certain RM (RegenX) sweepers may have Fan Housing Bolts that are improperly tensioned. FSO 1140232 must be installed on all affected sweepers. FSO 1140232 provides parts and instructions to update the Fan Housing Assembly Retention. Grade 5 hardware is replaced with new Grade 8 hardware and new spacers must be installed. Bolts must be tightened to 110 lb-ft.
1. Order FSO 1140232 for all affected units.
2. Install FSO 1140232 as instructed in the drawing supplied with the kit. (reference FIGURES 1&2)
Chronology :
- On or about May 22, 2022 – Elgin was notified of an incident where a RegenX sweeper fan assembly was reported to have detached from the sweeper.
- On or about May23, 2022 – Elgin began field, production, and design investigations into the incident.
- On or about May 25, 2022 – A review of warranty and field reports did not show any other reported failures.
- On or about May 27, 2022 – Elgin completed the investigation which revealed that some units in service may have the fan housing retention bolts improperly tightened. Out of an abundance of caution, Elgin decided to conduct a voluntary safety recall.
5 Affected Products
Vehicle
MAKE | MODEL | YEAR |
ELGIN | REGENX | 2018-2022 |
18 Associated Documents
Recall 573 Report – 06/08/2022
RCLRPT-22V391-7809.PDF 213.383KB
Remedy Instructions and TSB
RCRIT-22V391-8934.pdf 997.001KB
Defect Notice 573 Report
RCLRPT-22V391-1124.PDF 212.245KB
Information Change Card
RMISC-22V391-5236.pdf 84.029KB
Recall Acknowledgement
RCAK-22V391-2791.pdf 703.966KB
Recall 573 Report- 06/17/2022
RCLRPT-22V391-6925.PDF 212.913KB
Recall 573 Report-06/17/2022
RCLRPT-22V391-5763.PDF 212.913KB
Recall 573 Report- 06/27/2022
RCLRPT-22V391-8510.PDF 213.726KB
Owner Notification Letter(Part 577)
RCONL-22V391-0986.pdf 180.115KB
Recall Quarterly Report #1, 2022-2
RCLQRT-22V391-1967.PDF 211.141KB
Remedy Instructions and TSB
RCRIT-22V391-0600.pdf 1007.84KB
Recall Quarterly Report #2, 2022-3
RCLQRT-22V391-7814.PDF 211.246KB
Recall Quarterly Report #3, 2022-4
RCLQRT-22V391-6711.PDF 211.332KB
ISSUED Renotification Notice
RCRN-22V391-9515.pdf 148.563KB
ISSUED Renotification Notice
RCRN-22V391-2557.pdf 183.784KB
Recall Quarterly Report #2, 2022-3
RCLQRT-22V391-7298.PDF 211.42KB
Recall Quarterly Report #3, 2022-4
RCLQRT-22V391-2642.PDF 211.42KB
Recall Quarterly Report #4, 2023-1
RCLQRT-22V391-9243.PDF 211.42KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V391&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
- Complete package - assembly is designed with the same materials and components as the original part
- Quality assured - motors are tested in laboratory settings to ensure performance
- Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Fitment: Fit Ford Fiesta 1.6L 2011-2019
- Limited Warranty: Two years warranty
- Assured: All products are quality inspected & noise detected
- Airflow Rate: 760 CFM
- Interchange Part Number: 621-503, 622500, FO3115186
- 【Fitment】Compatible with Ford Ranger 2001-2011
- 【Design】High Quality ABS Plastic OEM Factory Style Radiator Cooling Fan Blade Design for Direct Replacement with the Original Part
- 【Function】 Continuously Improves the Cooling efficiency, Set the Performance of Your Vehicle to a Higher Level
- 【This Item Includes】1 X Radiator Cooling Fan Blade Made by High Quality ABS Plastic
- 【Note】Professional Installation is Highly Recommended; Installation Instruction is NOT Included
- Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
- Complete package - assembly is designed with the same materials and components as the original part
- Quality assured - motors are tested in laboratory settings to ensure performance
- Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- [Vehicle Fitment]: A-Premium Engine Radiator Cooling Fan is Compatible with Buick Enclave 2008-2013 V6 3.6L(with Air Conditioning), Enclave 2014-2017 V6 3.6L; Compatible with Chevrolet Traverse 2009-2013 V6 3.6L(with Air Conditioning), Traverse 2014-2017 V6 3.6L; Compatible with GMC Acadia 2007-2013 V6 3.6L(with Air Conditioning), Acadia 2014-2016 V6 3.6L, Acadia Limited 2017-2017 V6 3.6L; Compatible with Saturn Outlook 2007-2010 V6 3.6L(with Air Conditioning)
- [Reference Number]: 15226663, 20972760, 23434158, 25927026, 621-390, 621390, FA70469, 1581657, CF12045, 76206, 2811643, 6016152, 621930, GM3115219---You can select the "Year/Make/Model" or other parameters of your car at the top of the list and click "Confirm" before purchasing. Check if this cooling fan is suitable for your car
- [OE Performance]: This engine cooling fan assembly is made of PA material with excellent performance, sturdy construction, more durability, less noise, and is equipped with OE comparable parts to ensure a good fit.
- [Specifications]: ①Blade Quantity: 5+5; ②Connector Quantity: 1; ③Terminal Quantity: 4; ④Shroud Included: Yes; ⑤Rated Power: 320W; ⑥Fan Type: Dual Fans; ⑦Package: Sturdy Box
- [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted Cooling Fan. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.
- [Vehicle Fitment]: Compatible with Toyota 4Runner 1996-2002 V6 3.4L 5VZ-FE Sport Utility, T100 1995-1998 V6 3.4L 5VZ-FE Pickup, Tacoma 1995-2004 V6 3.4L 5VZ-FE Pickup, Tundra 2000-2004 V6 3.4L 5VZ-FE Pickup
- [Reference Number]: 620-534, 620534, 16361-62010, 1636162010---Please enter your vehicle information in the top left corner of the listing and check our Special Notes before ordering
- [Specifications]: ①Engine Fan's Blades Count: 7; ②Position: Front Side; ③ Material: Steel & Plastic
- [Function]: By increasing the air flow rate of the radiator core, the cooling fan blade can increase the heat cooling effect and accelerate the cooling of water, and keep your vehicle from overheating.
- [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted fan blade. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.
- Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
- Complete package - assembly is designed with the same materials and components as the original part
- Quality assured - motors are tested in laboratory settings to ensure performance
- Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
- Complete package - assembly is designed with the same materials and components as the original part
- Quality assured - motors are tested in laboratory settings to ensure performance
- Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
- Complete package - assembly is designed with the same materials and components as the original part
- Quality assured - motors are tested in laboratory settings to ensure performance
- Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- [Vehicle Fitment]: A-Premium Engine Radiator Cooling Fan is Compatible with Jeep Grand Cherokee 2004 L6 4.0L GAS Sport Utility---with 2 Speed Motor
- [Reference Number]: 52079528AD, 52079528AE, 620-041, 620041, CF13009, FA50196C, 76094, 6022107, 621130, CH3115142---You can select the "Year/Make/Model" or other parameters of your car at the top of the list and click "Confirm" before purchasing. Check if this cooling fan is suitable for your car
- [OE Performance]: This engine cooling fan assembly is made of PA material with excellent performance, sturdy construction, more durability, less noise, and is equipped with OE comparable parts to ensure a good fit.
- [Specifications]: ①Blade Quantity: 6; ②Connector Quantity: 1; ③Terminal Quantity: 3; ④Shroud Included: No; ⑤Rated Power: 280W; ⑥Fan Type: Single Fans; ⑦Package: Sturdy Box
- [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted Cooling Fan. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.
Last update on 2024-04-14 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Elgin Sweeper Company 1300 W. Bartlett Rd Elgin, Illinois 60120 847.741.5370 elginsweeper.com IMPORTANT SAFETY RECALL REMINDER March 27, 2023 Dealer Attn: Street City, State ZIP Regarding: According to our records the identified sweepers on the attached listing have not had the necessary safety recall repairs completed. Dear Service Manager, Service Bulletin SB-0143 RM Fan Assembly Retention recall has been issued for all RegenX street sweepers manufactured between December 2018 and May 2022. The RegenX fan housing assembly to engine frame bolts may have been improperly torqued. If the bolts fail, the fan assembly could detach from the sweeper. It is very important that your customers have this repair completed. All Elgin RegenX sweepers built between December 2018 and May 2022 will need to be repaired per the instructions in Service Bulletin SB-0243. Your customers will be reminded of this recall by mail by March 31, 2023. Elgin Sweeper has developed a solution for this problem with For Service Only kit #1140232. This kit is currently available to order when the customer receives notification of the recall. Please order enough field repair kits for the customers and units you are responsible for and which have not yet had the repair from the serial number and customer list in Appendix A. Any remaining units that are affected will be repaired at no charge to the customer. Customers are being asked to contact you to schedule the repair. We anticipate this repair will take approximately 0.5 hours. Please use the attached Recall Service Bulletin SB-0243 RM Fan Assembly Retention, which provides instructions for making the necessary repairs. Please contact the Elgin Service Department at 1-877-DIAL-ESG (1-877-342-5374), if you have any questions regarding this notice. Thank you for your support on this upcoming RegenX sweeper recall. Sincerely, Gary Gembala Service Manager Attachments: Dealer Affected Listing Rev 1 (Appendix A) Service Bulletin (SB-0243) Customer Notification Letter Reminder (Example)
**************************************************************************************************************
Elgin Sweeper Company 1300 W. Bartlett Rd Elgin, Illinois 60120 847.741.5370 elginsweeper.com IMPORTANT SAFETY RECALL REMINDER This notice applies to your vehicle, VIN # March 27, 2023 Customer name Customer Address 1 City, State, Zip Dear Elgin Customer: According to our records, your Elgin Street Sweeper has not had the necessary safety recall repairs completed. We urge you to have the free repair performed at your local Elgin dealership as soon as possible. REASON FOR RECALL Elgin Sweeper has decided that a defect which relates to motor vehicle safety exists in certain RegenX sweepers manufactured from December 2018 through May 2022. The fan housing to engine frame bolts may have been improperly tightened. If the bolts fail, the fan assembly could detach from the sweeper. All Elgin RegenX sweepers built between December 2018 and May 2022 will need to be repaired to resolve this issue. It is important that you have this repair completed. WHAT WE WILL DO A safety recall has been issued for your Elgin RegenX sweeper. Elgin Sweeper Company will repair this defect free of charge. We will install new mounting hardware properly tightened to specification to retain the fan assembly to the sweeper. WHAT YOU SHOULD DO Immediately inspect your sweeper to confirm that the three 0.50” diameter bolts that retain the fan housing to the engine frame are in place. These bolts should be tightened to 75 ft.lb. of torque. Do not operate your sweeper if any of the three bolts are missing or loose. Contact your Elgin Sweeper dealer immediately for assistance and to arrange a service date. Please contact your Elgin Sweeper dealer as soon as possible to arrange a service date. Instructions for making this repair have been sent to your dealer and the parts are available. It will take approximately 0.5 hours to complete this repair. Please ask your dealer if additional time will be needed to schedule and process your vehicle. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten (10) days. If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. For more information contact the Elgin Sweeper Customer Service Department at 1-877-DIAL-ESG (1-877-342-5374). 2 | P a g e An Information Change Card is provided for you if your name, address or other contact information has changed, or you no longer own this vehicle. Please fill out the postage paid card and return. Your Elgin Sweeper dealer is best equipped to obtain parts and provide service to ensure that your RegenX sweeper is repaired as promptly as possible. If, however, you take your sweeper to your dealer on the agreed service date and they do not remedy this condition within six (6) days of that date, please contact Elgin Customer Service by calling 1-877-DIAL-ESG (1-877-342-5374). We regret any inconvenience that this action may cause you. However, we are concerned about your safety. If your dealer fails or is unable to remedy this defect without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1-888-327-4236; (TTY: 1-800-424-9153); or go to http://www.safercar.gov. Sincerely, Gary Gembala Service Manager, Elgin Sweeper Company cc: Elgin Dealer Attachments: Change of Ownership Postcard Recall Reimbursement Information
**************************************************************************************************************
Subsidiary of Federal Signal Corporation ® SERVICE BULLETIN TO: All Dealer Principals, Service Managers, and Parts Managers DATE: 06/08/2022 NUMBER: SB-0243 SUBJECT: RM Fan Housing Bolt Torque Expiration Date: 06/08/2025 FSO 1140232 BOM Product Campaign 1/2 PURPOSE: Certain RM (RegenX) sweepers may have Fan Housing Bolts that are improperly tensioned. FSO 1140232 must be installed on all affected sweepers. UNITS TO SERVICE: See list of S/N page 3 SPECIAL TOOLS: 1/2” Torque Wrench calibrated and adjusted for 110 lb-ft. PROCEDURE: Certain RM (RegenX) sweepers may have Fan Housing Bolts that are improperly tensioned. FSO 1140232 must be installed on all affected sweepers. FSO 1140232 provides parts and instructions to update the Fan Housing Assembly Retention. Grade 5 hardware is replaced with new Grade 8 hardware and new spacers must be installed. Bolts must be tightened to 110 lb-ft. PARTS REQUIRED: Part No. Qty. Description 1140232 1 FSO – FAN HSG RETENTION WARRANTY COVERAGE: See the Warranty page in this document FIGURE 1 1. Order FSO 1140232 for all affected units. 2. Install FSO 1140232 as instructed in the drawing supplied with the kit. (reference FIGURES 1&2) Contact Elgin Sweeper Service if you do not receive the FSO drawing with the parts. FIGURE 2 Warranty Coverage and Claim Submittal The ESG dealer should submit a warranty claim for SB-0243 upon completion for any of the affected serial numbers. Submission must include photo of the completed installation for each unit. See typical photos (FIGURES 3 and 4). Use the unit serial number and Service Bulletin number for warranty submission in the new warranty system. 0.5 Hours (30 MIN) is allowed for installation of FSO 1140232 parts and testing. 2/2 Coverage Date Range Federal Signal Dealer Suggested Customer Suggested Parts % Labor % Parts % Labor % Parts % Labor % Group 1 06/08/2022 – 06/08/2025 100% 100% 0% 0% 0% 0% SERIAL NUMBER LISTING FSO 1140232 Typical photo for warranty submission Rear Bolts w/Spacers FIGURE 4 Typical photo for warranty submission Front Bolt w/Spacers FIGURE 3 RM00001 RM00002 RM41001 RM41002 RM41003 RM41004 RM41005 RM41006 RM41007 RM41008 RM41009 RM41010 RM41011 RM41012 RM41013 RM41014 RM41015 RM41016 RM41017 RM41018 RM41019 RM41020 RM41021 RM41022 RM41023 RM41024 RM41025 RM41026 RM41027 RM41028 RM41029 RM41030 RM41031 RM41032 RM41033 RM41034 RM41035 RM41036 RM41037 RM41038 RM41039 RM41040 RM41041 RM41042 RM41043 RM41044 RM41045 RM41046 RM41047 RM41048 RM41049 RM41050 RM41051 RM41052 RM41053 RM41054 RM41055 RM41056 RM41057 RM41058 RM41059 RM41060 RM41061 RM41062 RM41063 RM41064 RM41065 RM41066 RM41067 RM41068 RM41069 RM41070 RM41071 RM41072 RM41073 RM41074 RM41075 RM41077 RM41078 RM41079 RM41080 RM41081 RM41082 RM41083 RM41084 RM41085 RM41086 RM41087 RM41088 RM41089 RM41090 RM41091 RM41092 RM41093 RM41094 RM41095 RM41097 RM41098 RM41099 RM41100 RM41102 RM41103 RM41104 RM41107 RM41110 RM41111 RM41113 RM41116 RM41118 RM41120 RM41121 RM41129 RM41131 RM41132 RM41133 RM41135 RM41144 RM41146 RM41155 RMS41076
**************************************************************************************************************
Subsidiary of Federal Signal Corporation ® SERVICE BULLETIN TO: All Dealer Principals, Service Managers, and Parts Managers DATE: 08/23/2022 NUMBER: SB-0243a SUBJECT: RM Fan Housing Bolt Torque Expiration Date: 06/08/2025 FSO 1140232 BOM Product Campaign 1/2 PURPOSE: Certain RM (RegenX) sweepers may have Fan Housing Bolts that are improperly tensioned. FSO 1140232 must be installed on all affected sweepers. UNITS TO SERVICE: See list of S/N page 3 SPECIAL TOOLS: 1/2” Torque Wrench calibrated and adjusted for 110 lb-ft. PROCEDURE: Certain RM (RegenX) sweepers may have Fan Housing Bolts that are improperly tensioned. FSO 1140232 must be installed on all affected sweepers. FSO 1140232 provides parts and instructions to update the Fan Housing Assembly Retention. Grade 5 hardware is replaced with new Grade 8 hardware and new spacers must be installed. Bolts must be tightened to 110 lb-ft. PARTS REQUIRED: Part No. Qty. Description 1140232 1 FSO – FAN HSG RETENTION WARRANTY COVERAGE: See the Warranty page in this document FIGURE 1 1. Order FSO 1140232 for all affected units. 2. Install FSO 1140232 as instructed in the drawing supplied with the kit. (reference FIGURES 1&2) Contact Elgin Sweeper Service if you do not receive the FSO drawing with the parts. FIGURE 2 Warranty Coverage and Claim Submittal The ESG dealer should submit a warranty claim for SB-0243a upon completion for any of the affected serial numbers. Submission must include photo of the completed installation for each unit. See typical photos (FIGURES 3 and 4). Use the unit serial number and Service Bulletin number for warranty submission in the new warranty system. 0.5 Hours (30 MIN) is allowed for installation of FSO 1140232 parts and testing. 2/2 Coverage Date Range Federal Signal Dealer Suggested Customer Suggested Parts % Labor % Parts % Labor % Parts % Labor % Group 1 06/08/2022 – 06/08/2025 100% 100% 0% 0% 0% 0% SERIAL NUMBER LISTING FSO 1140232 Typical photo for warranty submission Rear Bolts w/Spacers FIGURE 4 Typical photo for warranty submission Front Bolt w/Spacers FIGURE 3 RM00001 RM00002 RM41001 RM41002 RM41003 RM41004 RM41005 RM41006 RM41007 RM41008 RM41009 RM41010 RM41011 RM41012 RM41013 RM41014 RM41015 RM41016 RM41017 RM41018 RM41019 RM41020 RM41021 RM41022 RM41023 RM41024 RM41025 RM41026 RM41027 RM41028 RM41029 RM41030 RM41031 RM41032 RM41033 RM41034 RM41035 RM41036 RM41037 RM41038 RM41039 RM41040 RM41041 RM41042 RM41043 RM41044 RM41045 RM41046 RM41047 RM41048 RM41049 RM41050 RM41051 RM41052 RM41053 RM41054 RM41055 RM41056 RM41057 RM41058 RM41059 RM41060 RM41061 RM41062 RM41063 RM41064 RM41065 RM41066 RM41067 RM41068 RM41069 RM41070 RM41071 RM41072 RM41073 RM41074 RM41075 RM41077 RM41078 RM41079 RM41080 RM41081 RM41082 RM41083 RM41084 RM41085 RM41086 RM41087 RM41088 RM41089 RM41090 RM41091 RM41092 RM41093 RM41094 RM41095 RM41096 RM41097 RM41098 RM41099 RM41100 RM41102 RM41103 RM41104 RM41107 RM41110 RM41111 RM41113 RM41116 RM41118 RM41120 RM41121 RM41129 RM41131 RM41132 RM41133 RM41135 RM41144 RM41146 RM41155 RMS41076 RM41096
**************************************************************************************************************
Elgin Sweeper Company 1300 W. Bartlett Rd Elgin, Illinois 60120 847.741.5370 elginsweeper.com IMPORTANT SAFETY RECALL This notice applies to your vehicle, VIN # 3ALACXF June 27, 2022 Customer name Customer Address 1 City, State, Zip Dear Elgin Customer: This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. REASON FOR RECALL Elgin Sweeper has decided that a defect which relates to motor vehicle safety exists in certain RegenX sweepers manufactured from December 2018 through May 2022. The fan housing to engine frame bolts may have been improperly tightened. If the bolts fail, the fan assembly could detach from the sweeper. This could cause a vehicle crash without warning, increasing risk of property damage, personal injury, or death. All Elgin RegenX sweepers built between December 2018 and May 2022 will need to be repaired to resolve this issue. WHAT WE WILL DO A safety recall has been issued for your Elgin RegenX sweeper. Elgin Sweeper Company will repair this defect free of charge. We will install new mounting hardware properly tightened to specification to retain the fan assembly to the sweeper. WHAT YOU SHOULD DO Immediately inspect your sweeper to confirm that the three 0.50” diameter bolts that retain the fan housing to the engine frame are in place. These bolts should be tightened to 75 ft.lb. of torque. Do not operate your sweeper if any of the three bolts are missing or loose. Contact your Elgin Sweeper dealer for assistance. Please contact your Elgin Sweeper dealer as soon as possible to arrange a service date. Instructions for making this repair have been sent to your dealer and the parts are available. It will take approximately 0.5 hours to complete this repair. Please ask your dealer if you wish to know if additional time will be needed to schedule and process your vehicle. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten (10) days. If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. For more information contact the Elgin Sweeper Customer Service Department at 1- 877-DIAL-ESG (1-877-342-5374). 2 | P a g e An Information Change Card is provided for you if your name, address or other contact information has changed, or you no longer own this vehicle. Please fill out the postage paid card and return. Your Elgin Sweeper dealer is best equipped to obtain parts and provide service to ensure that your RegenX sweeper is repaired as promptly as possible. If, however, you take your sweeper to your dealer on the agreed service date and they do not remedy this condition within six (6) days of that date, we recommend you contact Elgin Customer Service by calling 1-877-DIALESG (1-877-342-5374). We regret any inconvenience that this action may cause you. However, we are concerned about your safety. If your dealer fails or is unable to remedy this defect without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1-888-327-4236; (TTY: 1-800-424-9153); or go to http://www.safercar.gov. Sincerely, Gary Gembala Service Manager, Elgin Sweeper Company cc: Elgin Dealer Attachments: Change of Ownership Postcard Recall Reimbursement Information
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-391 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Elgin Sweeper Company, Inc. Submission Date : JUN 27, 2022 NHTSA Recall No. : 22V-391 Manufacturer Recall No. : SB-0243 Manufacturer Information : Manufacturer Name : Elgin Sweeper Company, Inc. Address : 1300 West Bartlett Road Elgin IL 60120-7259 Company phone : 847-741-5370 Population : Number of potentially involved : 120 Estimated percentage with defect : 80 % Vehicle Information : Vehicle 1 : 2018-2022 Elgin Sweeper RegenX Vehicle Type : LOW VOLUME VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : All units of this model potentially have this safety defect. This defect is limited to this product model. Production Dates : DEC 26, 2018 – MAY 31, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The fan assembly mounting bolts may have been improperly torqued. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The fan assembly could become detached and fall from the machine. This can cause a vehicle crash without prior warning, increasing risk of property damage, personal injury, or death. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 22V-391 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Bolt Component Description : .500-13 X 2.00 HHCS Component Part Number : 5002904 Component Name 2 : Elastic Stop Nut Component Description : .500-13 ELAS STOP NUT Component Part Number : 5005090 Component Name 3 : Flat Washer Component Description : .500 PLNWSHR-A/N Component Part Number : 5009121 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : o On or about May 22, 2022 – Elgin was notified of an incident where a RegenX sweeper fan assembly was reported to have detached from the sweeper. o On or about May23, 2022 – Elgin began field, production, and design investigations into the incident. o On or about May 25, 2022 – A review of warranty and field reports did not show any other reported failures. o On or about May 27, 2022 – Elgin completed the investigation which revealed that some units in service may have the fan housing retention bolts improperly tightened. Out of an abundance of caution, Elgin decided to conduct a voluntary safety recall. Part 573 Safety Recall Report 22V-391 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : Elgin will notify owners, and dealers will install field service kit 1140232 free of charge. This kit provides replacement hardware and installation instructions. Owners may contact Elgin Customer Service at 1-847-342-5374 with questions. Elgin’s reimbursement plan will follow: RMRP-22V391-0245.docx (SB-0243 RM Recall Reimbursement Information 17Jun22.docx). How Remedy Component Differs from Recalled Component : The grade 5 mount hardware is being replaced with grade 8 hardware. Identify How/When Recall Condition was Corrected in Production : The original hardware was replaced by stronger hardware. The production change was implemented on all units shipped on or after June 01, 2022. Recall Schedule : Description of Recall Schedule : Elgin will send dealer and owner notification letters after approval by NHTSA. Planned Dealer Notification Date : JUN 17, 2022 – JUN 24, 2022 Planned Owner Notification Date : JUN 27, 2022 – JUL 08, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-391 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Elgin Sweeper Company, Inc. Submission Date : JUN 08, 2022 NHTSA Recall No. : 22V-391 Manufacturer Recall No. : SB-0243 Manufacturer Information : Manufacturer Name : Elgin Sweeper Company, Inc. Address : 1300 West Bartlett Road Elgin IL 60120-7259 Company phone : 847-741-5370 Population : Number of potentially involved : 120 Estimated percentage with defect : 80 % Vehicle Information : Vehicle 1 : 2018-2022 Elgin Sweeper RegenX Vehicle Type : LOW VOLUME VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : All units of this model potentially have this safety defect. This defect is limited to this product model. Production Dates : DEC 26, 2018 – MAY 31, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The fan assembly mounting bolts may not have been properly tightened. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The fan assembly could become detached and fall from the machine. This can cause a vehicle crash without prior warning, increasing risk of property damage, personal injury, or death. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 22V-391 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : On or about May 22, 2022 – Elgin was notified of an incident where a RegenX sweeper fan assembly was reported to have detached from the sweeper. On or about May 23, 2022 – Elgin began field, production, and design investigations into the incident. On or about May 25, 2022 – A review of warranty and field reports did not show any other reported failures. On or about May 27, 2022 – Elgin completed the investigation which revealed that some units in service may have the fan housing retention bolts not properly tightened. Out of an abundance of caution, Elgin decided to conduct a voluntary safety recall. Description of Remedy : Description of Remedy Program : Elgin will notify owners, and dealers will install field service kit 1140232 free of charge. This kit provides replacement hardware and installation instructions. Owners may contact Elgin Customer Service at 1-847-342-5374 with questions. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : The original hardware was replaced by stronger hardware. The production change was implemented on all units shipped on or after June 01, 2022. Recall Schedule : Part 573 Safety Recall Report 22V-391 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Recall Schedule : Elgin will send dealer and owner notification letters after approval by NHTSA. Planned Dealer Notification Date : JUN 17, 2022 – JUN 24, 2022 Planned Owner Notification Date : JUN 27, 2022 – JUL 08, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-391 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Elgin Sweeper Company, Inc. Submission Date : JUN 17, 2022 NHTSA Recall No. : 22V-391 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Elgin Sweeper Company, Inc. Address : 1300 West Bartlett Road Elgin IL 60120-7259 Company phone : 847-741-5370 Population : Number of potentially involved : NR Estimated percentage with defect : NR Vehicle Information : Vehicle 1 : 2018-2022 Elgin Sweeper RegenX Vehicle Type : LOW VOLUME VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : All units of this model potentially have this safety defect. This defect is limited to this product model. Production Dates : DEC 26, 2018 – MAY 31, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The fan assembly mounting bolts may have been improperly torqued. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The fan assembly could become detached and fall from the machine. This can cause a vehicle crash without prior warning, increasing risk of property damage, personal injury, or death. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 22V-391 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Bolt Component Description : .500-13 X 2.00 HHCS Component Part Number : 5002904 Component Name 2 : Elastic Stop Nut Component Description : .500-13 ELAS STOP NUT Component Part Number : 5005090 Component Name 3 : Flat Washer Component Description : .500 PLNWSHR-A/N Component Part Number : 5009121 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : NR Description of Remedy : Description of Remedy Program : NR How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Part 573 Safety Recall Report 22V-391 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-391 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Elgin Sweeper Company, Inc. Submission Date : JUN 01, 2022 NHTSA Recall No. : 22V-391 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Elgin Sweeper Company, Inc. Address : 1300 West Bartlett Road Elgin IL 60120-7259 Company phone : 847-741-5370 Population : Number of potentially involved : NR Estimated percentage with defect : NR Vehicle Information : Vehicle 1 : 2018-2022 Elgin Sweeper RegenX Vehicle Type : LOW VOLUME VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : All units of this model potentially have this safety defect. This defect is limited to this product model. Production Dates : DEC 26, 2018 – MAY 31, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The fan assembly mounting bolts may have been improperly torqued. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The fan assembly could become detached and fall from the machine. This can cause a vehicle crash without prior warning, increasing risk of property damage, personal injury, or death. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 22V-391 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : NR Description of Remedy : Description of Remedy Program : NR How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR * NR – Not Reported
SEOCONTENT-END