NHTSA ID Number: 11009689
Manufacturer Communication Number: 15-305-22R
TSB/Document Date: 2024-11-04
Summary
This bulletin following information announces reprogramming file availability and provides a software update installation procedure to optimize the new Gen 4.5 Denso CP1.5 Audio and Navigation head units utilized in the models listed.
ATTENTION:
GENERAL MANAGER
q
PARTS MANAGER
q
CLAIMS PERSONNEL
q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
q
© 2022 Subaru
of America, Inc. All rights reserved.
SERVICE BULLETIN
APPLICABILITY:
23-25MY Outback/Legacy Models
(including Wilderness models)
23-24MY Ascent Models
24MY Impreza
24MY Crosstrek (including Wilderness models)
24MY WRX
25MY Forester
SUBJECT:
NUMBER: 15-305-22R
DATE:
11/15/22
REVISED:
10/02/24
Reprogramming File Availability for Optimization
of Gen 4.5 Denso CP1.5 Infotainment Systems
INTRODUCTION:
The following information announces reprogramming file availability and provides a software
update installation procedure to optimize the new Gen 4.5 Denso CP1.5 Audio and Navigation head
units utilized in the models listed above. As in previous models, the procedure will involve either
downloading the software update files from Subarunet or using those sent directly from Nuspire
to the SDS Notebook and transferring them onto a USB flash drive for head unit installation. This
update offer countermeasure for the CarPlay concern with hands-free call, when receiving party is not
able to hear the caller as the microphone data is muted. Please see Appendix 9 (page 37) for more
details.
NOTE: The over the air updates (FOTA) that are available currently does not contain the
improvements for CarPlay concern with hands free call where receiving party is not able to hear the
caller. This USB/SSM5 update is required to address the concern.
ATTENTION: For Impreza/Crosstrek 24MY and WRX 24MY and Legacy/Outback 25MY and
Forester 25MY it is required to use SSM5-R to access Software Update setting in Dealership
Mode Menu.
LEGACY/OUTBACK 23-24MY
ASCENT 23-24MY
IMPREZA/CROSSTREK 24MY
WRX 24MY
LEGACY/OUTBACK 25MY
FORESTER 25MY
REPROGRAMMING BY USB
APPLICABLE
NOT APPLICABLE
REPROGRAMMING BY SSM5-R AND USB
NOT APPLICABLE
APPLICABLE
It is VERY IMPORTANT to read and understand this information completely before proceeding.
CAUTION: VEHICLE SERVICE PERFORMED BY UNTRAINED PERSONAL COULD RESULT
IN THE EQUIPMENT DAMAGE OR EVEN SERIOUS INJURY.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: 15-305-22R; Revised: 10/02/24
Page 1 of 76
CAUTION: In order to complete the update of CP1.5 to the latest version, verify that DCM has
already been updated to the latest version as per the instructions in TSB 15-315-23.
If CP1.5 is updated to the latest version while the DCM isn’t on its latest version, it may cause
infotainment system failure.
Note: The updates for CCU and DCM can be performed in any order, but it is necessary they are
both the latest versions before returning the vehicle to the customer or system damage will occur.
Note: follow TSB 15-315-23 for applicability information.
After this update is successfully completed the vehicle is capable of SiriusXM with 360L service.
SiriusXM (SXM) with 360L service is a combination of satellite radio and streaming services. It
uses both satellite and internet connection modem (DCM) to deliver 200+ channels, with some
channels delivered exclusively via modem (DCM).
Service Bulletin is intended for use by trained technicians ONLY. It informs technicians of
conditions, which may occur in some vehicles or provides information, which could assist with
proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety
instructions, and know-how to do the job correctly and safely.
A timeline chart along with a complete list of all the conditions addressed and enhancements included
in this and previous Denso software updates are provided in Appendix 8 (page 36) and Appendix 9
(page 37) located at the end of this bulletin.
IMPORTANT NOTE: The update contains 3 folders and 2 files. When performing an update, the
USB must contain the matching number of folders and files and all files must be replaced.
ALWAYS use the latest files together as a set.
NEVER reuse or combine files from a prior update with a newer version.
PART INFORMATION:
NOTE: High Level unit is equipped with Navigation option
(Map icon on Home screen)
11.6-Inch Display, Mid and High Level Units
Bulletin Number: 15-305-22R; Revised: 10/02/24
Dual 7.0-Inch Display, Base Level Unit
Continued...
Page 2 of 76
Materials Required:
•
•
•
SDS notebook
DSTi/DST10
Flash drive USB 2.0 or higher
An empty, USB 2.0 or 3.0 storage device (flash drive) will be needed to perform the update
procedure. The device should be dedicated to storing and transferring these updating files only. It
should be a minimum of 64GB or more in size and contain a NTFS file format before downloading
the update files onto it. Be sure to locate and re-format any existing USB drives used for updating
audio units. They must be fully cleared before adding these new update files to them.
IMPORTANT NOTES:
• NEVER change the update file names after downloading them.
• NEVER save any other files on the same flash drive.
Please follow Appendix 1 (page 8) "Flash Drive Selection" for selecting an applicable storage device
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
STEP 1- VERY IMPORTANT: Before proceeding with the software updating procedure, the
currently installed software version ID MUST be confirmed by following the steps below:
1a) After starting the engine and system boot-up completes, from the HOME screen, touch the
Settings button.
1b) Press the General button. Use the down arrow to scroll to System Information then press to
display the System Information / Version information.
Continued...
Bulletin Number: 15-305-22R; Revised: 10/02/24
Page 3 of 76
The examples below identify the head unit model and the last 6 digits signify the software version
number. Examples:
Outback/Legacy and Ascent
• F6(9)1WHMxxx-xxx (High model software)
• F6(9)1WMMxxx-xxx (Mid model software)
• F6(9)1WBMxxx-xxx (Base model software)
Outback/Legacy, Ascent
MY
23-25MY
23-24MY
Carline
Outback/Legacy
Trim/Grade
Installed Software
Versions
Available Software
Version
BASE
013-282
023-580
033-680
043-781
053-880
FM1WBM073-980
MID
013-282
023-580
033-270
033-570
033-681
043-781
053-880
FM1WMM073-980
HIGH
013-282
023-580
033-270
033-570
033-681
043-781
053-880
FM1WHM073-980
MID
013-282
023-580
033-270
033-570
033-681
043-781
053-880
FM1WMM073-980
HIGH
013-282
023-580
033-270
033-570
033-681
043-781
053-880
FM1WHM073-980
Ascent
ATTENTION: If the software version number matches “Installed Software Versions” proceed to
STEP 2 below. If the software version is “Available Software Version” as the unit already has the
latest software version installed. No update is required at this time.
Continued...
Bulletin Number: 15-305-22R; Revised: 10/02/24
Page 4 of 76
Impreza/Crosstrek
• F7(9)1WHMxxx-xxx (High model software)
• F7(9)1WMMxxx-xxx (Mid model software)
• F7(9)1WBMxxx-xxx (Base model software)
Impreza, Crosstrek
MY
24MY
Carline
Impreza / Crosstrek
Trim/Grade
Installed Software Versions
Latest Software Version
BASE
033-681
043-781
053-880
FM1WBM073-980
MID
033-681
043-781
053-880
FM1WMM073-980
HIGH
033-681
043-781
053-880
FM1WHM073-980
WRX
• F7(9)1WHMxxx-xxx (High model software)
• F7(9)1WMMxxx-xxx (Mid model software)
WRX
MY
24MY
Carline
Trim/Grade
Installed Software Versions
Latest Software Version
MID
043-781
053-880
FM1WMM073-980
HIGH
043-781
053-880
FM1WHM073-980
Trim/Grade
Installed Software Versions
Latest Software Version
BASE
F91WBM053-880
FM1WBM073-980
MID
F91WMM053-880
FM1WMM073-980
HIGH
F91WHM053-880
FM1WHM073-980
WRX
FORESTER
FORESTER
MY
25MY
Carline
Forester
If the software version number matches “Installed Software Versions” proceed to STEP 2 below.
If the software version is “Available Software Version” as the unit already has the latest software
version installed. No update is required at this time.
STEP 2- Prepare the USB flash drive
CAUTION: Do not use any USB flash drive which utilizes file organizing software or an operating
system.
VERY IMPORTANT: Before attempting to download any data files, confirm the PC and flash drive
being used is not infected with any virus. The flash drive MUST be formatted for NTFS.
Continued...
Bulletin Number: 15-305-22R; Revised: 10/02/24
Page 5 of 76
•
Make sure the USB flash drive contains no other files.
•
Right click on the corresponding “Removable Disk”.
•
Select “Format”.
•
From the File System drop-down menu, select “NTFS”
•
Check the “Quick Format” box (if not already done).
•
Click on “Start” to format the USB flash drive.
STEP 3- Download the Update Files to the USB:
Please transfer the files to USB Flash Drive following Appendix 2 (page 9) "Download the Update
Files to the USB" .
STEP 4- Perform the software update.
CAUTIONS:
NEVER attempt to install the software immediately following an exchange module installation. Let
the system restart first and operate for 20 minutes.
NEVER attempt to install the software a second time for 30 minutes following a previously
unsuccessful software installation.
NEVER attempt to install the software for at least 30 minutes after completing a FOTA update.
Perform the update in a well ventilated location if updating with the engine running OR with the
ignition ON and a battery charger connected.
Impreza/Crosstrek 24MY
Legacy/Outback 23 – 24MY
WRX 24MY
Ascent 23-24MY
Legacy/Outback 25MY
Forester 25MY
Reprogramming by USB
Applicable
Not Applicable
Reprogramming by SSM5-R and USB
Not Applicable
Applicable
ATTENTION: For Impreza/Crosstrek 24MY and WRX 24MY and Legacy/Outback 25MY and
Forester 25MY it is required to use SSM5-R to access Software Update setting in Dealership Mode
Menu.
Please refer to Appendix 4 (page 19) “Perform the software update by SSM5-R and USB” for the
work procedures for Impreza/Crosstrek 24MY and WRX 24MY and Legacy/Outback 25MY and
Forester 25MY.
Continued...
Bulletin Number: 15-305-22R; Revised: 10/02/24
Page 6 of 76
For Legacy/Outback 23 - 24MY and Ascent 23-24MY please access Software Update setting in
Update setting in Dealership Mode Menu by using CP1 controls directly from CID.
Please refer to Appendix 3 (page 13) “Perform the software update by USB” for the work procedures
for Legacy/Outback 23 - 24MY and Ascent 23-24MY.
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru
Added Security Gold plan, this repair may be submitted using the following claim information:
Labor Description
Labor
Operation#
Labor Time
Fail Code
DENSO CP 1 SOFTWARE UPDATE - INCLUDES VERSION CHECK
A831-186
1.0
ZTZ-48
(BASE, MID, HIGH)
NOTE: If the infotainment software update is being applied to new inventory vehicles (not CPO or
used) just prior to retail delivery with a particular focus on customers who are iPhone users, use the
following special claims information.
Labor Description
Labor Operation#
Labor Time
Fail Code
Denso CP 1.5 New vehicle programming
B831098
0.8
ZWA-48
REMINDER: The new Software Version number must be entered when prompted at claim entry.
NOTE: Retailers are now permitted to claim up to $5.00 per claim in Sublet to help offset the cost
of replacement USB drives. Repeated re-formatting of the USB drives used for reprogramming
can compromise their ability to operate properly. Over time, hardware connections can loosen and
stored data files can become corrupted. Retailers are responsible for replacing any worn or otherwise
inoperable USB drives as needed. This compensation is intended to help defray those costs.
IMPORTANT REMINDERS:
•
SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
Continued...
Bulletin Number: 15-305-22R; Revised: 10/02/24
Page 7 of 76
Appendix 1
Flash Drive Selection
There are various types of USB flash drive available from many suppliers. If the head unit does
NOT recognize the USB drive during the reprogramming process due to Controller IC type of USB
drive or Compatibility with the head unit, confirm the flash drive format is NTFS. The flash drive
must be formatted for NTFS. If a recognition problem persists, use a USB flash drive from another
manufacturer.
•
Kingston®:
DataTraveler G3 Series DataTraveler 100 G3 DT100G3
DataTraveler SE9 Series DataTraveler SE9 G2 3.0 DTSE9G2
Digital Data Traveler 3.0 USB Flash Drive - Violet DTIG4
•
SanDisk®:
Ultra Series SDCZ48-064G-J57
Cruzer Blade Series
Cruzer Glide Series CZ60 SDCZ60-064G-B35
•
Transcend®:
JetFlash 790 Series TS64GJF790KBE
•
PNY®:
Retract USB 3.0 Flash Drive, black (P-FD64GTRTC-GE)
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-305-22R
Replacement Service Bulletin Number:
MFR Communication Date: 2024-10-02
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.