NHTSA ID Number: 11009689
Manufacturer Communication Number: 15-305-22R
TSB/Document Date: 2024-11-04
Summary
This bulletin following information announces reprogramming file availability and provides a software update installation procedure to optimize the new Gen 4.5 Denso CP1.5 Audio and Navigation head units utilized in the models listed.
ATTENTION:
GENERAL MANAGER
q
PARTS MANAGER
q
CLAIMS PERSONNEL
q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
q
© 2022 Subaru
of America, Inc. All rights reserved.
SERVICE BULLETIN
APPLICABILITY:
23-25MY Outback/Legacy Models
(including Wilderness models)
23-24MY Ascent Models
24MY Impreza
24MY Crosstrek (including Wilderness models)
24MY WRX
25MY Forester
SUBJECT:
NUMBER: 15-305-22R
DATE:
11/15/22
REVISED:
10/02/24
Reprogramming File Availability for Optimization
of Gen 4.5 Denso CP1.5 Infotainment Systems
INTRODUCTION:
The following information announces reprogramming file availability and provides a software
update installation procedure to optimize the new Gen 4.5 Denso CP1.5 Audio and Navigation head
units utilized in the models listed above. As in previous models, the procedure will involve either
downloading the software update files from Subarunet or using those sent directly from Nuspire
to the SDS Notebook and transferring them onto a USB flash drive for head unit installation. This
update offer countermeasure for the CarPlay concern with hands-free call, when receiving party is not
able to hear the caller as the microphone data is muted. Please see Appendix 9 (page 37) for more
details.
NOTE: The over the air updates (FOTA) that are available currently does not contain the
improvements for CarPlay concern with hands free call where receiving party is not able to hear the
caller. This USB/SSM5 update is required to address the concern.
ATTENTION: For Impreza/Crosstrek 24MY and WRX 24MY and Legacy/Outback 25MY and
Forester 25MY it is required to use SSM5-R to access Software Update setting in Dealership
Mode Menu.
LEGACY/OUTBACK 23-24MY
ASCENT 23-24MY
IMPREZA/CROSSTREK 24MY
WRX 24MY
LEGACY/OUTBACK 25MY
FORESTER 25MY
REPROGRAMMING BY USB
APPLICABLE
NOT APPLICABLE
REPROGRAMMING BY SSM5-R AND USB
NOT APPLICABLE
APPLICABLE
It is VERY IMPORTANT to read and understand this information completely before proceeding.
CAUTION: VEHICLE SERVICE PERFORMED BY UNTRAINED PERSONAL COULD RESULT
IN THE EQUIPMENT DAMAGE OR EVEN SERIOUS INJURY.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: 15-305-22R; Revised: 10/02/24
Page 1 of 76
CAUTION: In order to complete the update of CP1.5 to the latest version, verify that DCM has
already been updated to the latest version as per the instructions in TSB 15-315-23.
If CP1.5 is updated to the latest version while the DCM isn’t on its latest version, it may cause
infotainment system failure.
Note: The updates for CCU and DCM can be performed in any order, but it is necessary they are
both the latest versions before returning the vehicle to the customer or system damage will occur.
Note: follow TSB 15-315-23 for applicability information.
After this update is successfully completed the vehicle is capable of SiriusXM with 360L service.
SiriusXM (SXM) with 360L service is a combination of satellite radio and streaming services. It
uses both satellite and internet connection modem (DCM) to deliver 200+ channels, with some
channels delivered exclusively via modem (DCM).
Service Bulletin is intended for use by trained technicians ONLY. It informs technicians of
conditions, which may occur in some vehicles or provides information, which could assist with
proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety
instructions, and know-how to do the job correctly and safely.
A timeline chart along with a complete list of all the conditions addressed and enhancements included
in this and previous Denso software updates are provided in Appendix 8 (page 36) and Appendix 9
(page 37) located at the end of this bulletin.
IMPORTANT NOTE: The update contains 3 folders and 2 files. When performing an update, the
USB must contain the matching number of folders and files and all files must be replaced.
ALWAYS use the latest files together as a set.
NEVER reuse or combine files from a prior update with a newer version.
PART INFORMATION:
NOTE: High Level unit is equipped with Navigation option
(Map icon on Home screen)
11.6-Inch Display, Mid and High Level Units
Bulletin Number: 15-305-22R; Revised: 10/02/24
Dual 7.0-Inch Display, Base Level Unit
Continued...
Page 2 of 76
Materials Required:
•
•
•
SDS notebook
DSTi/DST10
Flash drive USB 2.0 or higher
An empty, USB 2.0 or 3.0 storage device (flash drive) will be needed to perform the update
procedure. The device should be dedicated to storing and transferring these updating files only. It
should be a minimum of 64GB or more in size and contain a NTFS file format before downloading
the update files onto it. Be sure to locate and re-format any existing USB drives used for updating
audio units. They must be fully cleared before adding these new update files to them.
IMPORTANT NOTES:
• NEVER change the update file names after downloading them.
• NEVER save any other files on the same flash drive.
Please follow Appendix 1 (page 8) "Flash Drive Selection" for selecting an applicable storage device
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
STEP 1- VERY IMPORTANT: Before proceeding with the software updating procedure, the
currently installed software version ID MUST be confirmed by following the steps below:
1a) After starting the engine and system boot-up completes, from the HOME screen, touch the
Settings button.
1b) Press the General button. Use the down arrow to scroll to System Information then press to
display the System Information / Version information.
Continued...
Bulletin Number: 15-305-22R; Revised: 10/02/24
Page 3 of 76
The examples below identify the head unit model and the last 6 digits signify the software version
number. Examples:
Outback/Legacy and Ascent
• F6(9)1WHMxxx-xxx (High model software)
• F6(9)1WMMxxx-xxx (Mid model software)
• F6(9)1WBMxxx-xxx (Base model software)
Outback/Legacy, Ascent
MY
23-25MY
23-24MY
Carline
Outback/Legacy
Trim/Grade
Installed Software
Versions
Available Software
Version
BASE
013-282
023-580
033-680
043-781
053-880
FM1WBM073-980
MID
013-282
023-580
033-270
033-570
033-681
043-781
053-880
FM1WMM073-980
HIGH
013-282
023-580
033-270
033-570
033-681
043-781
053-880
FM1WHM073-980
MID
013-282
023-580
033-270
033-570
033-681
043-781
053-880
FM1WMM073-980
HIGH
013-282
023-580
033-270
033-570
033-681
043-781
053-880
FM1WHM073-980
Ascent
ATTENTION: If the software version number matches “Installed Software Versions” proceed to
STEP 2 below. If the software version is “Available Software Version” as the unit already has the
latest software version installed. No update is required at this time.
Continued...
Bulletin Number: 15-305-22R; Revised: 10/02/24
Page 4 of 76
Impreza/Crosstrek
• F7(9)1WHMxxx-xxx (High model software)
• F7(9)1WMMxxx-xxx (Mid model software)
• F7(9)1WBMxxx-xxx (Base model software)
Impreza, Crosstrek
MY
24MY
Carline
Impreza / Crosstrek
Trim/Grade
Installed Software Versions
Latest Software Version
BASE
033-681
043-781
053-880
FM1WBM073-980
MID
033-681
043-781
053-880
FM1WMM073-980
HIGH
033-681
043-781
053-880
FM1WHM073-980
WRX
• F7(9)1WHMxxx-xxx (High model software)
• F7(9)1WMMxxx-xxx (Mid model software)
WRX
MY
24MY
Carline
Trim/Grade
Installed Software Versions
Latest Software Version
MID
043-781
053-880
FM1WMM073-980
HIGH
043-781
053-880
FM1WHM073-980
Trim/Grade
Installed Software Versions
Latest Software Version
BASE
F91WBM053-880
FM1WBM073-980
MID
F91WMM053-880
FM1WMM073-980
HIGH
F91WHM053-880
FM1WHM073-980
WRX
FORESTER
FORESTER
MY
25MY
Carline
Forester
If the software version number matches “Installed Software Versions” proceed to STEP 2 below.
If the software version is “Available Software Version” as the unit already has the latest software
version installed. No update is required at this time.
STEP 2- Prepare the USB flash drive
CAUTION: Do not use any USB flash drive which utilizes file organizing software or an operating
system.
VERY IMPORTANT: Before attempting to download any data files, confirm the PC and flash drive
being used is not infected with any virus. The flash drive MUST be formatted for NTFS.
Continued...
Bulletin Number: 15-305-22R; Revised: 10/02/24
Page 5 of 76
•
Make sure the USB flash drive contains no other files.
•
Right click on the corresponding “Removable Disk”.
•
Select “Format”.
•
From the File System drop-down menu, select “NTFS”
•
Check the “Quick Format” box (if not already done).
•
Click on “Start” to format the USB flash drive.
STEP 3- Download the Update Files to the USB:
Please transfer the files to USB Flash Drive following Appendix 2 (page 9) "Download the Update
Files to the USB" .
STEP 4- Perform the software update.
CAUTIONS:
NEVER attempt to install the software immediately following an exchange module installation. Let
the system restart first and operate for 20 minutes.
NEVER attempt to install the software a second time for 30 minutes following a previously
unsuccessful software installation.
NEVER attempt to install the software for at least 30 minutes after completing a FOTA update.
Perform the update in a well ventilated location if updating with the engine running OR with the
ignition ON and a battery charger connected.
Impreza/Crosstrek 24MY
Legacy/Outback 23 – 24MY
WRX 24MY
Ascent 23-24MY
Legacy/Outback 25MY
Forester 25MY
Reprogramming by USB
Applicable
Not Applicable
Reprogramming by SSM5-R and USB
Not Applicable
Applicable
ATTENTION: For Impreza/Crosstrek 24MY and WRX 24MY and Legacy/Outback 25MY and
Forester 25MY it is required to use SSM5-R to access Software Update setting in Dealership Mode
Menu.
Please refer to Appendix 4 (page 19) “Perform the software update by SSM5-R and USB” for the
work procedures for Impreza/Crosstrek 24MY and WRX 24MY and Legacy/Outback 25MY and
Forester 25MY.
Continued...
Bulletin Number: 15-305-22R; Revised: 10/02/24
Page 6 of 76
For Legacy/Outback 23 - 24MY and Ascent 23-24MY please access Software Update setting in
Update setting in Dealership Mode Menu by using CP1 controls directly from CID.
Please refer to Appendix 3 (page 13) “Perform the software update by USB” for the work procedures
for Legacy/Outback 23 - 24MY and Ascent 23-24MY.
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru
Added Security Gold plan, this repair may be submitted using the following claim information:
Labor Description
Labor
Operation#
Labor Time
Fail Code
DENSO CP 1 SOFTWARE UPDATE - INCLUDES VERSION CHECK
A831-186
1.0
ZTZ-48
(BASE, MID, HIGH)
NOTE: If the infotainment software update is being applied to new inventory vehicles (not CPO or
used) just prior to retail delivery with a particular focus on customers who are iPhone users, use the
following special claims information.
Labor Description
Labor Operation#
Labor Time
Fail Code
Denso CP 1.5 New vehicle programming
B831098
0.8
ZWA-48
REMINDER: The new Software Version number must be entered when prompted at claim entry.
NOTE: Retailers are now permitted to claim up to $5.00 per claim in Sublet to help offset the cost
of replacement USB drives. Repeated re-formatting of the USB drives used for reprogramming
can compromise their ability to operate properly. Over time, hardware connections can loosen and
stored data files can become corrupted. Retailers are responsible for replacing any worn or otherwise
inoperable USB drives as needed. This compensation is intended to help defray those costs.
IMPORTANT REMINDERS:
•
SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
Continued...
Bulletin Number: 15-305-22R; Revised: 10/02/24
Page 7 of 76
Appendix 1
Flash Drive Selection
There are various types of USB flash drive available from many suppliers. If the head unit does
NOT recognize the USB drive during the reprogramming process due to Controller IC type of USB
drive or Compatibility with the head unit, confirm the flash drive format is NTFS. The flash drive
must be formatted for NTFS. If a recognition problem persists, use a USB flash drive from another
manufacturer.
•
Kingston®:
DataTraveler G3 Series DataTraveler 100 G3 DT100G3
DataTraveler SE9 Series DataTraveler SE9 G2 3.0 DTSE9G2
Digital Data Traveler 3.0 USB Flash Drive - Violet DTIG4
•
SanDisk®:
Ultra Series SDCZ48-064G-J57
Cruzer Blade Series
Cruzer Glide Series CZ60 SDCZ60-064G-B35
•
Transcend®:
JetFlash 790 Series TS64GJF790KBE
•
PNY®:
Retract USB 3.0 Flash Drive, black (P-FD64GTRTC-GE)
- [J2534 Pass-Thru Programmer] - TOPDON RLink J2534 is...
- [All-in-One OEM Reprogramming and Diagnostics] - When...
- [Tested, Trusted, and Proven for Accuracy] - TOPDON RLink...
- [One-Click Installation, Continuous Updates] - The exclusive...
- [Works with Windows Compatibility and OEM Software...
This product presentation was made with AAWP plugin.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-305-22R
Replacement Service Bulletin Number:
MFR Communication Date: 2024-10-02
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW, for Audi, for GM, for Ford and more. Note:D200 does‘t provide any OE software.
- 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
- Smarter Diagnostics, Broader Coverage, Greater Value Than $1,000+ Tools: The game-changing VD80BT OBD2 scanner delivers 4000+ active tests, 42+ hot services, advanced ECU coding, PMI & V.A.G Guided—all in one scanner for car. With OE-level full system scan and intelligent topology mapping that cuts diagnostic time by up to 50%, you'll work smarter and faster. Supporting FCA AutoAuth, CAN FD & DoIP protocols, this car scanner covers over 10,000 vehicle models worldwide. Built for serious pros and DIYers, it features 8" HD screen & 4+64GB storage, 7.3V fast charging with long-lasting battery, and 33–66ft stable wireless connection—making it the most complete diagnostic solution you’ll ever own
- Intuitive Topology Map, Fast Locate Faults: Why waste time clicking module by module? VD80BT car diagnostic scanner takes diagnostics to the next level with its intuitive Topology Map—a premium feature usually found in $1000+ obd scanner. With one tap, it performs all system scan and presents all modules and DTCs in a clear, color-coded layout, boosting diagnostic efficiency by up to 200% and helping you locate issues instantly and reduce repair time and costs. Whether you're a pro boosting efficiency or a beginner learning diagnostics, this obd2 scanner diagnostic tool makes fault-finding faster and smarter for you. Note: varies by vehicle model, please check compatibility before purchase
- Wireless Connectivity Simplifies Bi-Directional Control: With 4000+ active tests, including throttle reset, window calibration and solenoid check, VD80BT bidirectional scan tool lets you diagnose and verify functions faster, smarter, and more efficiently. This scanner for car redefines flexibility in bi-directional control through a fully wireless connection, freeing you from the constraints of wired car diagnostic tool in the workshop. Imagine actively controlling components like the A/C clutch, fuel injector, ABS pump, or radiator fan within a wireless range of 33–66ft around the vehicle—all while enjoying stable, high-speed wireless diagnostic and real-time data monitoring
- 42+ Hot Services, One Powerful Scanner for Car: Why pay a shop $100 just to reset a light? VD80BT car scanner diagnostic tool gives you 42+ hot services from basic resets to advanced maintenance tasks like Crank Sensor Relearn, Injector Coding, ABS Bleeding, Oil Reset, Throttle Relearn, EPB, BMS Reset, Tire Size Reset and more. Plus, it offers 100+ vehicle-specific features including Idle Relearn, VIN Write, Brake Fluid Replacement, Fuel Trim Reset, ABS Initialization and more. Whether you’re resetting TPMS or fixing a stubborn SAS, this car computer diagnostic reader delivers shop-grade precision at a fraction of the cost. Varies by model. Send VIN to verify compatibility before purchase
- OE-Level Full System Diagnostics in Your Hands: Dominate diagnostics like a dealership with VD80BT scan tool for all vehicles, delivering factory-grade scanning for aLL systems—including ABS, SRS, ECM, TCM and more. View up to 8 PID graphs simultaneously to quickly catch intermittent issues and troubleshoot with confidence. Easily read and clear DTCs, retrieve freeze frame data, and run active tests for faster, more accurate repairs. It’s like having a dealership-grade scan tool in your pocket, complete with data playback and CSV export for in-depth analysis. Stop guessing and start fixing with surgical precision—professional diagnostics made simple and portable. Check compatibility Please
- Affordable Solution for Professional-grade Car Diagnostics & Repair: As the budget-friendly OBD2 scanner under $300, the VD70 Lite car diagnostic tool offers 31+ hot resets, full bi-directional controls with 4000+ active tests, all system diagnostics, 8-in-One live data graphing (export as CSV Export/Recording/Playback), CAN FD & DoIP protocols, and long-term free update. Additional features include Auto VIN & Auto Scan, diagnostic report sharing/printing, with coverage for over 10,000 vehicle models worldwide, suitable for DIYers, Car Owners, Technicians, and Mechanics on car repairs and maintenance tasks.
- OBD2 Scanner with Full Bi-directional Control: The Bidirectional scan tool VIDAGTOOL VD70 Lite performs 4000+ active tests that can send execution commands to the ECU module and identify the repair status, covering for windows, doors, ABS, valves, wipers, headlights, rear mirrors, sunroof,and more in-vehicle components. This bidirectional OBD2 scanner is a must-have diagnostic tool for auto technicians and mechanics on a budget! The available function tests vary by model—please check compatibility via vdiagtool2 @ outlook . c o m before purchase.
- OE All Systems Diagnostics & 8-IN-One Data Graphing: VD70 Lite is a dealer-level car scanner diagnostic tool with Auto VIN that can do in-depth diagnostics for 100+ modern car brands, covering all systems including engine, transmission, airbag, ABS, ESP, TPMS, radio, etc, to read/clear code, view live data, freeze frame, and read ECU info. This advanced OBD2 Scanner with 8-in-one data graphing and detailed diagnostic reports makes data viewing more intuitive, ensures quickly accurate repairs by identifying issues, and easily masters the car situation.
- Stay Ahead with 31+ Reset for Faster & Easier Repairs: VDIAGTOOL VD70 Lite scanner for car meets almost all daily maintenance needs for both home mechanics and workshops as a professional automotive scan tool. It can perform Oil Reset, ABS Bleed, Crank Sensor Relearn, Idle Relearn, Injector Coding, Window Initialization, HVAC Calibration, Suspension Calibration, Throttle Matching, etc, ensuring efficient repairs and complete maintenance. Besides, long-term free updates keep its functionality and broad vehicle compatibility up to date. Functions vary by model, please send us the Vehicle Model, Year, VIN for compatibility before purchase.
- 150+ Models, 10000+ Car Coverage & 22 Languages：As a powerful car computer diagnostic tool, VD70 Lite helps you to quickly troubleshoot issues for 95% of US, European, and Asian vehicles. Supporting 22 languages makes it a global car diagnostic scanner for auto mechanics worldwide without language barriers. Note: Simply provide your tool’s S/N and reach out to vdiagtool2 @ outlook . c o m to change the menu language.
This product presentation was made with AAWP plugin.
Last update on 2026-06-09 / Affiliate links / Images from Amazon Product Advertising API