NHTSA ID Number: 11006911
Manufacturer Communication Number: fsd_12-5-1-2_082024.pdf
TSB/Document Date: 2024-09-04
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
• Apple Music
• Apple Podcasts
• Audible
• Spotify
• Tidal
• TuneIn
When listening to internet radio or a music streaming service, the options available on the Media Player screen vary depending
on what you are listening to. Touch the next (or previous) arrows to play the next (and in some cases previous) available
station, episode, or track. You can also play next/previous using the left scroll button on the steering wheelsteering yoke (or
steering wheel).
1336
Owner's Manual
Navigation and Entertainment
NOTE: You can use voice commands to adjust media settings and preferences, such as volume control, playing certain songs,
or switching the media source (see Voice Commands on page 97).
Volume Controls
Volume can be controlled by:
• Roll the scroll button on the left side of the steering wheelsteering yoke (or steering wheel) up or down to increase or
decrease volume respectively.This adjusts the volume for media, voice commands, and phone calls.
• Volume may be adjusted based on your driving speed and climate settings.
• Touch the arrows associated with the speaker icon on the bottom corner of the touchscreen.
• To mute the volume, press the left scroll button. Press again to unmute.
• Pressing the left scroll button during a phone call mutes both the sound and your microphone.
Media Settings
NOTE: The settings available vary depending on market region. Also, a setting may not be applicable to all audio sources.
Press the settings icon located in the Media Player's search bar to access audio settings.
You can adjust these settings:
• Tone: Drag the sliders to adjust the subwoofer and any of the five frequency bands (Bass, Bass/Mid, Mid, Mid/Treble, and
Treble). If equipped with premium audio, you can adjust the level of sound immersion to make your music experience more
engaging by dragging the immersive sound slider according to your preferences.
• Balance: Drag the center circle to the location in Model SModel XModel 3Model Y where you want to focus the sound.
• Options: Set preferences for optional features. For example, you can turn DJ Commentary, Explicit Content and Allow
Mobile Control on or off.
• Sources: Displays all available media sources and allows you to choose whether you want to show or hide each source. You
may want to hide media sources that you never use. Once hidden, the media source does not appear on the drop down list
in Media Player, nor will it appear in the app tray when you touch the App Launcher. You can re-display a hidden media
source at any time by returning to this settings screen.
Searching Audio Content
Touch Media Player's magnifying glass icon to search for a particular song, album, artist, podcast, or station.
You can also use voice commands to search hands-free (see Voice Commands on page 97). If available, touch
HD® to play high definition versions of the selected frequency.
SiriusXM Satellite Radio (if equipped)
If equipped, you can listen to SiriusXM, a subscription-based satellite radio service. To receive satellite radio channels, you
must provide the radio service provider with the radio ID for your touchscreen.
To display the radio ID:
1. Touch the radio source icon, then select SiriusXM from the list.
2. Move the channel selector to channel 0.
3. The Radio ID displays in the station information area.
Owner's Manual
1337
Navigation and Entertainment
To select a SiriusXM channel, you can either manually scroll through channel numbers, or you can browse channels by
category.
Caraoke
NOTE: Depending on vehicle configuration and market region, Caraoke may not be available on your vehicle. Caraoke requires
premium connectivity.
Navigate to Media Player and select the drop down menu to change the media source to Caraoke. Or add Caraoke as an app in
the app launcher. You can browse through various songs and select the song you want to sing. Touch the microphone icon to
enable or disable the song's main vocals. Disabling the microphone leaves only the song's instrumentals and background
vocals. Touch the lyrics icon (located next to the microphone icon) to enable or disable the song's lyrics.
United States only: For a complete karaoke studio, microphones are available for purchase online at http://www.tesla.com.
WARNING: Never read Caraoke lyrics while driving. You must always pay attention to the road and traffic conditions.
When driving, the Caraoke lyrics are intended only for use by a passenger.
Recents and Favorites
For most source content, recents and favorites display at the top for easy access.
To add a currently playing station, podcast, or audio file to your Favorites list, touch the Favorites icon on Media
Player.
To remove an item as a favorite, touch the highlighted Favorites icon. You can also remove multiple favorites by
expanding Media Player to show all favorites for the applicable type of source content. Then press and hold any
favorite. An X appears on all favorites and you can then touch the X to remove them from your Favorites list.
Your recently played selections are updated continuously so you don't need to remove them.
NOTE: Selections you play on FM (if equipped) radio are not included in the Recents list.
Playing Media from Devices
USB Flash Drives
Insert a flash drive into a front USB port (see USB Ports on page 57USB Ports on page 58USB Ports on page 44USB Ports on
page 41). Touch Media Player > USB, then touch the name of the desired folder. To play media from a USB connection,
Model SModel XModel 3Model Y recognizes flash drives only. To play media from other types of devices (such as an iPod),
you must connect the device using Bluetooth (see Bluetooth Connected Devices on page 700).
NOTE: Media Player supports USB flash drives with exFAT formatting (NTFS is not currently supported).
NOTE: Use a USB port located at the front of the center console. The USB connections at the rear of the console are for
charging only.
NOTE: For some vehicles manufactured after approximately November 1, 2021, the center console USB ports may only support
charging devices. Use the USB port inside the glove box for all other functions.
Bluetooth Connected Devices
Pair your Bluetooth-capable device to Model SModel XModel 3Model Y (see Bluetooth on page 359) to play stored audio
files. Choose Media Player's Phone source, touch the name of your Bluetooth-connected device, then touch CONNECT.
1338
Owner's Manual
Navigation and Entertainment
Theater, Arcade, and Toybox
Overview
NOTE: Entertainment options may vary depending on market region, date of manufacture, and vehicle configuration.
Theater: Play various video streaming services (such as Netflix, YouTube, Hulu, etc.) while parked. Available
only if Model SModel XModel 3Model Y is connected to WiFi, or is equipped with premium connectivity and a
cellular signal is available.
Arcade: Want to game? You may need to use the steering wheelsteering yoke (or steering wheel) buttons or a
Bluetooth or USB controller to play. See Gaming Controllers and Headphones on page 703.
NOTE: For some vehicles manufactured after approximately November 1, 2021, the center console USB ports
can only be used to charge devices. On these vehicles, you must use the USB port inside the glove box.
Toybox: Play in the Toybox while parked.
WARNING: Use these features only when Model SModel XModel 3Model Y is parked. Always pay attention to road and
traffic conditions when driving. Using these features while driving is illegal and very dangerous.
NOTE: You can also use voice commands to access these features (see Voice Commands on page 97).
Toybox
Your vehicle's toybox includes features that can be fun to use. Here's an example of the types of features you can find in
Toybox:
Select This...
To Do This...
007 (air
suspension
vehicles only)
You are no longer a "Driver", you're a "Diver"! Touch Controls > Suspension to change your depth.
Boombox
If Model SModel XModel 3Model Y is equipped with a Pedestrian Warning System, delight pedestrians
with a variety of sounds from your vehicle's external speaker while in Park. See Boombox on page 702 for
more details.
NOTE: Check local laws before using Boombox in public areas.
Emissions
Fun can come in surprising ways. Select your preferred fart style and target seat. Use your turn signal or
press the left scroll wheel when you’re ready to “release” your prank. For those lucky vehicles equipped
with a Pedestrian Warning System, you can choose to broadcast externally when your vehicle is parked.
But wait-- the fun doesn't stop there! Use the mobile app to conduct remote emissions testing by
touching and holding any of the four quick control buttons and selecting the fart button.
Light Show
Park outside, turn the volume up, roll down your windows, then enjoy the show. Schedule the light show
for a future time and customize the song to surprise your loved ones.
NOTE: Light show should not be used when parked on or near public roads. Doing so can be distracting
to other road users. Before activating, it is the driver’s responsibility to ensure the use of light show
complies with local laws and regulations.
NOTE: Light show supports multiple custom shows from one USB drive to enjoy and share with others
(follow the instructions onscreen).
Model Xmas
Owner's Manual
Park outside, turn the volume up, roll down your windows, then enjoy the show. Schedule the light show
for a future time and customize the song to surprise your loved ones.
1339
Navigation and Entertainment
Ludicrous Speed
(P100D vehicles
only)
Press and hold the Ludicrous setting (open the Controls drawer and touch Controls > Pedals & Steering >
Acceleration > Ludicrous) for approximately five seconds. Touch Yes, bring it on! if you want to go fast. To
display power and acceleration readings on the instrument panel, press either scroll button briefly until
the available options are displayed. Then, roll the scroll button to highlight Readout then press the scroll
button again.
Mars
The map shows your Model SModel XModel 3Model Y as a rover on the Martian landscape, and the
About Your Tesla
box displays SpaceX's interplanetary spaceship.
Rainbow Charge
Port
When Model SModel XModel 3Model Y is locked and charging, press the button on the mobile
connector ten times in quick succession. Neat, huh?
Rainbow Road
Need more cowbell? Visit Rainbow Road by pulling the Autopilot stalk toward youmoving the drive stalk
fully downmoving the drive stalk fully down four times in quick succession while Autosteer is enabled.
Romance
You can’t roast chestnuts by an open fire in your car, but you can still cozy up with your loved ones by this
virtual fireplace. Cue the music and get your romance on!
Sketchpad
Channel your inner Picasso. Show us what you got! Touch Publish to submit your artistic compositions to
Tesla
for critiquing.
TRAX
It's never too late to follow your dream of becoming a world-famous DJ. With TRAX, you can turn your
vehicle into your own personal music studio. While in Park, choose from an array of instruments and
unique sounds to create the next hit song. Microphone and headset are not included.
The Answer to
the Ultimate
Question of Life,
The Universe,
and Everything
Rename your vehicle to 42 (touch Controls > Software and touch the vehicle's name). Notice the new
name.
Car Colorizer (if
equipped)
Change the color of your Model SModel XModel 3Model Y on the touchscreen. Touch the color swatch
next to the vehicle name and customize the exterior color, tone, and more.
Boombox
NOTE: Check local laws before using Boombox in public places.
Using Boombox, you can play sound externally through the Pedestrian Warning System (PWS) speaker when
Model SModel XModel 3Model Y is in Park. For example:
• Play current media.
• Use Megaphone to project a modulated version of your voice.
• Press the horn to play the first five seconds of any sound from a compatible USB device.
NOTE: If Camp mode is enabled in Climate Controls, you can exit the vehicle and use the Tesla
app to control the volume.
Prepare a USB drive for Boombox
Follow these steps to add up to five custom Boombox sounds:
1. On a computer, format a USB drive to exFAT, MS-DOS FAT (for Mac), ext3, or ext4 (NTFS is currently not supported).
2. Create a folder on the USB drive called Boombox.
NOTE: The USB drive can only contain one folder. For example, it cannot be shared with Dashcam.
3. Add .wav and .mp3 audio files to the folder. Although you can add as many files as the USB drive's capacity allows, you can
only select from the first five, as listed alphabetically. File names, of any length, can contain upper or lower case alpha
characters (a-z/A-Z), numbers from 0-9, periods (.), a dashes (-), and underscores (_).
4. Plug the USB drive into a front USB port.
NOTE: For some vehicles manufactured after approximately November 1, 2021, the center console USB ports can only be
used to charge devices. On these vehicles, you must use the USB port inside the glove box.
5. Choose a sound from the USB drive by selecting from the Boombox dropdown menu.
1340
Owner's Manual
Navigation and Entertainment
Uninstall Games
Uninstalling games is useful if you want to free up your vehicle's onboard storage. To uninstall a game, navigate to Arcade,
select the game you wish to uninstall, then touching Uninstall. Once you uninstall a game, you must download it before you can
play the game again.
Gaming Controllers and Headphones
You can pair Bluetooth Classic gaming controllers to Model SModel XModel 3Model Y by following the same steps as pairing
your phone (see Phone, Calendar, and Web Conferencing on page 362). After pairing, the controller automatically connects to
the vehicle. Once connected, you can use the controller to play select games. Model SModel XModel 3Model Y supports up
to two Bluetooth devices at a time (such as two controllers, or one phone and one controller).
For vehicles manufactured prior to approximately November 1, 2021, you can connect USB-compatible game controllers to the
front USB ports in the vehicle's center console. For vehicles manufactured after approximately November 1, 2021, you must
use the glovebox USB port.
You can pair Bluetooth Classic headphones by navigating to Bluetooth Devices and adding new headphones on the rear
touchscreen. Once connected, you can use the headphones to listen to audio from the rear touchscreen.
NOTE: Some vehicles manufacture before approximately September 2021 may require additional hardware to be compatible
with wireless headphones. If the touchscreen displays this message, use the mobile app to schedule a service appointment.
Owner's Manual
1341
Charging and Energy Consumption
Electric Vehicle Components
High Voltage Components
1. Front drive unit
2. Heat pump assembly
3. High voltage cables
4. High voltage Battery![]()
5. Service access panel for high voltage components (ancillary bay)
6. Rear drive unit(s)
7. Charge port
8. Cargo bed outlets
WARNING: The high voltage system must be serviced only by a trained technician. Do not disassemble, remove or
replace high voltage components, cables or connectors. High voltage cables are typically colored orange for easy
identification.
WARNING: Read and follow all instructions provided on the labels that are attached to Model SModel XModel 3Model Y.
These labels are there for your safety.
WARNING: In the unlikely event that a fire occurs, exit the vehicle, move to an area at least 100 ft. (30 meters) away from
Model SModel XModel 3Model Y, and immediately contact your local fire emergency responders.
1342
Owner's Manual
Charging and Energy Consumption
Charging Equipment
Charging equipment designed specifically to charge your Model SModel XModel 3Model Y is available from Tesla
.
For information on the charging equipment available for your region, go to http://shop.tesla.com.
Tesla offers:
• Wall Connector: Installs in your parking space and is the fastest way to charge your vehicle for daily use.
• Mobile Connector: Allows you to plug into most commonly used power outlets. When using the Mobile Connector, attach
the smart adapter (if required) to the Mobile Connector before plugging it in to the power outlet, and then plug in your
vehicle.
• Adapters: Allows you to plug into the most commonly used public charging stations in your region. At a public charge
station, first attach the adapter to the station's charging connector and then plug in your vehicle.
There is also a network of Superchargers, destination chargers, and other fast charging stations for when charging while
traveling.
Low Voltage Battery
Model SModel XModel 3Model Y uses a 48V lithium-ion low voltage battery. The 48V battery powers the windows, doors,
touchscreen, and other low voltage vehicle systems when the high voltage Battery
is unavailable. The 48V battery also
provides a redundant source of power for critical systems (such as power steering).
NOTE: 48V low voltage connectors are colored blue for easy identification, and wires that operate at 48V are marked with blue
tape.
By using a 48V low voltage battery instead of the 12V lead-acid battery found in many conventional vehicles,
Model SModel XModel 3Model Y is able to operate more efficiently.
WARNING: Assume that the low voltage components of Model SModel XModel 3Model Y, including all cables and
connectors, are always energized. Do not handle low voltage cables or connect/disconnect connectors when the low
voltage system is powered. Because the 48V low voltage system operates at a higher voltage than a typical low voltage
system, there is an increased risk of personal injury, arcing, or component damage if the low voltage components of
Model SModel XModel 3Model Y are handled improperly.
Owner's Manual
1343
Charging and Energy Consumption
High Voltage Battery
Information
Model SModel XModel 3Model Y has one of the most sophisticated battery systems in the world. The most important way to
preserve the high voltage Battery
is to LEAVE YOUR VEHICLE PLUGGED IN when you are not using it. This is particularly
important if you are not planning to drive Model SModel XModel 3Model Y for several weeks.
NOTE: When left idle and unplugged, your vehicle periodically uses energy from the Battery for system tests and recharging
the low voltage battery when necessary.
There is no advantage to waiting until the Battery’s level is low before charging. In fact, the Battery performs best when
charged regularly.
NOTE: If you allow the Battery to discharge to 0%, other components may become damaged or require replacement (for
example, the low voltage battery). In these cases, you are responsible for repair and/or transporting expenses. Dischargerelated expenses are not covered by the warranty or under the Roadside Assistance policy.
The peak charging rate of the Battery may decrease slightly after a large number of DC Fast Charging sessions, such as those
at Superchargers. To ensure maximum driving range and Battery safety, the Battery charge rate is decreased when the Battery
is too cold, the Battery’s charge is nearly full, and when the Battery conditions change with usage and age. These changes in
the condition of the Battery are driven by battery physics and may increase the total Supercharging duration by a few minutes
over time. You can minimize the amount of charge time by using Trip Planner (if available in your market region) to warm the
Battery while driving to a Supercharger. See Trip Planner on page 696 for more information.
Battery Care
Never allow the Battery to fully discharge.
Even when Model SModel XModel 3Model Y is not being driven, its Battery discharges very slowly to power the onboard
electronics. The Battery can discharge at a rate of approximately 1% per day, though the discharge rate may vary depending
on environmental factors (such as cold weather), vehicle configuration, and your selected settings on the touchscreen.
Situations can arise in which you must leave Model SModel XModel 3Model Y unplugged for an extended period of time (for
example, at an airport when traveling). In these situations, keep the 1% in mind to ensure that you leave the Battery with a
sufficient charge level. For example, over a two week period (14 days), the Battery may discharge by approximately 14%.
Discharging the Battery to 0% may result in damage to vehicle components. To protect against a complete discharge,
Model SModel XModel 3Model Y enters a low-power consumption mode when the displayed charge level drops to
approximately 0%. In this mode, the Battery stops supporting the onboard electronics and auxiliary low voltage battery. Once
this low-power consumption mode is active, immediately plug in Model SModel XModel 3Model Y to prevent a jump start and
low voltage battery replacement.
NOTE: If Model SModel XModel 3Model Y is unresponsive and does not unlock, open, or charge, the low voltage battery may
be discharged. In this situation, try jump starting the low voltage battery (see Jump Starting on page 922). If the vehicle is still
unresponsive, use the mobile app to schedule a service appointment.
Temperature Limits
For better long-term performance, avoid exposing Model SModel XModel 3Model Y to ambient temperatures above 140° F
(60° C) or below -22° F (-30° C) for more than 24 hours at a time.
Energy Saving Feature
Model SModel XModel 3Model Y has an energy-saving feature that reduces the amount of energy being consumed by the
displays when Model SModel XModel 3Model Y is not in use. On newer vehicles, this feature is automated to provide an
optimal level of energy saving. However, on older vehicles, you can control the amount of energy being consumed by the
displays by touching Controls > Display > Energy Saving. For more information on maximizing range and saving energy, see
Getting Maximum Range on page 734.
Submerged Vehicle
As with any vehicle, if your Tesla has been exposed to flooding, extreme weather events or has otherwise been submerged in
water (especially in salt water), treat it as if it’s been in an accident and contact your insurance company for support. Do not
attempt to operate the vehicle before Tesla Service has inspected it, but you should tow or move it away from any structures.
1344
Owner's Manual
Charging and Energy Consumption
NOTE: Damage caused by water is not covered under warranty.
Battery Warnings and Cautions
WARNING: The high voltage system must be serviced only by a trained technician. Under no circumstances should you
open or tamper with the Battery. Do not disassemble, remove or replace high voltage components, cables or
connectors. High voltage cables are typically colored orange for easy identification.
CAUTION: If the Battery’s charge level falls to 0%, you must plug it in. If you leave it unplugged for an extended period,
it may not be possible to charge or use Model SModel XModel 3Model Y without jump starting or replacing the low
voltage battery. Leaving Model SModel XModel 3Model Y unplugged for an extended period can also result in
permanent Battery damage. If you are unable to charge Model SModel XModel 3Model Y after attempting to jump start
the low voltage battery, schedule a service appointment.
CAUTION: The Battery requires no owner maintenance. Do not remove the coolant filler cap and do not add fluid. If the
instrument paneltouchscreen warns you that the fluid level is low, use the mobile app to schedule a service appointment.
CAUTION: Do not use the Battery as a stationary power source. Doing so voids the warranty.
Owner's Manual
1345
Charging and Energy Consumption
Charging Instructions
Opening the Charge Port
The charge port is located above the driver's side rear wheel of Model SModel XModel 3Model Y.
With Model SModel XModel 3Model Y in Park and a valid key is detected, press and release the button on the Tesla charge
cable to open the charge port door.
You can also open the charge port door using any of these methods:
• On the touchscreen, touch the charge port on the vehicle avatar and touch Open.
• On the touchscreen, touch Controls > Charging > Open Charge Port.
• Press the charge port door when Model SModel XModel 3Model Y is unlocked and an authenticated phone is nearby.
• When the vehicle is locked with an authenticated key in range, you can also press the button on the charge cable to open
the charge port door (see Keys on page 1123).
• Use voice commands. You can also use voice commands to close the charge port door, and begin or stop charging (see
Voice Commands on page 97).
• Use the mobile app.
The icon lights up white when you open the charge port door (see Charge Port Light on page 1349). If you do not insert a
charge cable into the charge port within a few minutes after opening the charge port door, the charge port door closes. If this
happens, open the charge port door again.
1346
Owner's Manual
Charging and Energy Consumption
NOTE: In extremely cold weather or icy conditions, it is possible that your charge port latch may freeze in place. If this
happens, you can thaw ice on the charge port latch by turning on the rear defrost or by enabling preconditioning using the
mobile app. To prevent this from occurring, use the Schedule settings, which are also available on both the charging and
climate control screens, to schedule a Precondition by (see Preconditioning on page 732).
CAUTION: Do not try to force the charge port door open.
During Charging
Tesla strongly recommends leaving Model SModel XModel 3Model Y plugged in when not in use. This maintains the Battery at
the optimum level of charge.
During charging, the charge port light (the icon) pulses green, and the touchscreen displays real-time charging status. The
frequency at which the green charge port light pulses slows down as the charge level approaches full. When charging is
complete, the light stops pulsing and is solid green. If Model SModel XModel 3Model Y is locked, the charge port light does
not light up. For more information, see Charge Port Light on page 1349.
If the charge port light turns red while charging, there is an issue with charging. Check the touchscreen for an alert describing
the issue. An issue can occur due to something as common as a power outage. If a power outage occurs, charging resumes
automatically when power is restored.
NOTE: Model SModel XModel 3Model Y cannot charge from Gen 1 Wall Connectors if the charge current on the Wall
Connector is greater than 48A (the front cover plate of Gen 1 Wall Connectors have a metal finish). When you attempt to
charge a Model SModel XModel 3Model Y from a Gen 1 Wall Connector with a charge current that's configured incorrectly,
the lights on the Wall Connector flash red eight times. For more information on changing the charge current, see https://
www.tesla.com/support/charging/product-guides#gen-1-wall-connector.
NOTE: The thermal system may produce steam while Model SModel XModel 3Model Y charges. For example, odorless steam
can come from the front of your vehicle while charging at a Supercharger in cold temperatures. This is normal and not a cause
for concern. Likewise, it is normal to hear sounds during charging. Particularly at high currents, the refrigerant compressor and
fan operate as needed to keep the Battery cool.
NOTE: Air conditioning performance is generally not affected by charging. However, in some circumstances (for example,
charging at high currents during a particularly warm day), the air coming from the vents may not be as cool as expected and a
message displays on the touchscreen. This is normal and ensures that the Battery stays within an optimal temperature range
while charging to support longevity and optimum performance.
WARNING: Never spray liquid at a high velocity (for example, a pressure washer) towards the charge port while
charging. Doing so can result in serious injury or damage to the vehicle, charging equipment, or property.
WARNING: Do not use third-party charging adapters with Model SModel XModel 3Model Y.
CAUTION: Keep the cargo bed outlet cover closed when Cybertruck is charging, especially in wet weather. Charging
may be disabled if moisture enters one of the outlets.
Charging Status
On the touchscreen, the charging status displays at the top of the vehicle status area when the charge port door is open.
Owner's Manual
1347
Charging and Energy Consumption
1. Charge limit: The set charge limit. The charge limit is the capacity at which Model SModel XModel 3Model Y will stop
charging. To change the charge limit, touch Controls > Charging.
2. Time remaining: The estimated time remaining to charge to your set limit. Or, if you are navigating to a destination, the
estimated time remaining until you can continue your trip.
NOTE: When charging to 100%, the Model SModel XModel 3Model Y may continue to charge with low power when
charging is displayed as complete. This is expected. Because the added energy beyond this point is low, it is usually not
beneficial to continue charging.
3. Range: The total estimated driving distance or energy percentage (depending on your display setting) available.
NOTE: To change how energy units are displayed, touch Controls > Display > Energy Display. You can also touch the driving
distance or energy percentage on the touchscreen to switch between them.
4. Charging: The amount of power currently being provided by the charger.
5. Charging rate: The speed at which the vehicle is charging, shown in range gained per hour.
6. Range gained: The estimated increase in driving distance achieved in the charging session.
1348
Owner's Manual
Charging and Energy Consumption
Charge Port Light
Above the charge port, the charge port light shows charging status. The charge port light turns off after a short period of time
if the vehicle is locked (for example, if you walk up to the vehicle after it has been charging for a while).
After you insert a charge cable into Model SModel XModel 3Model Y, wait a few seconds and confirm that the charge port
light begins blinking green and that your vehicle is charging. If the light is amber or red, troubleshoot the issue before you
leave to ensure a successful charging session.
WHITE: The charge port door is open. Model SModel XModel 3Model Y is ready to charge and
the connector is not inserted, or the charge port latch is unlocked and the connector is ready to
be removed.
BLUE, BLINKING: Model SModel XModel 3Model Y is communicating with the charger but has
not started charging or providing power yet (such as when your vehicle is preparing to charge, or
when your vehicle is preparing to provide power from the high voltage Battery).
BLUE: The charger is connected, but Model SModel XModel 3Model Y is not charging (such as
when scheduled charging is active).
PURPLE, BLINKING: Model SModel XModel 3Model Y is providing power from the high voltage
Battery. The frequency of blinking corresponds to the amount of power that Cybertruck is
providing (more frequent blinks correspond to more power being provided). For more
information, see Powershare Home Backup on page 1359.
GREEN, BLINKING: Charging is in progress. As Model SModel XModel 3Model Y approaches a
full charge, the frequency of the blinking slows.
GREEN, SOLID: Charging is complete.
AMBER, BLINKING: Model SModel XModel 3Model Y is charging at a reduced current because
the connector is not fully plugged in.
AMBER, SOLID: Model SModel XModel 3Model Y is not charging because the connector is not
fully plugged in. Realign the connector to the charge port and insert fully.
RED: A fault is detected and charging has stopped. Check the touchscreen for an alert. In some
cases, an alert can be easily cleared by unplugging the charge cable, returning it to the charger,
then trying again. In other cases (such as a tripped fuse or a faulty charger), you may need to
check the power source. If the red light persists, try using a different charger.
Stopping Charging
Stop charging at any time by pressing the button on the charge cable to disconnect, or touch Stop Charging on the
touchscreen or mobile app. To disconnect the charge cable:
1. Ensure your vehicle is unlocked. To prevent unauthorized unplugging of the charge cable, the charge cable latch remains
locked and Model SModel XModel 3Model Y must be unlocked before you can disconnect the charge cable.
2. Press and hold the button on the connector handle to release the latch.
3. Pull the connector from the charge port. The charge port door automatically closes.
To disconnect the charge cable when using an adapter at a public charge station:
1. Unlock Model SModel XModel 3Model Y.
2. While holding the public charging handle in one hand and the adapter in the other hand, press and hold the button on the
public charging handle and pull both outwards, removing the handle and adapter at the same time.
NOTE: If the charging station handle separates from the adapter, leaving the adapter in Model SModel XModel 3Model Y,
use the touchscreen to unlock the charge port.
3. Press and hold the button on the charging handle again to release the adapter from the public charging handle.
The charge port door closes automatically shortly after you remove the charge cable.
Owner's Manual
1349
Charging and Energy Consumption
You can also automatically stop charging from a specified time by creating a charge schedule. For more information, see
Create a Schedule on page 732.
Charge Settings
Access charge settings by touching Controls > Charging when Model SModel XModel 3Model Y is in Park. You can also touch
the Battery icon on the touchscreen to access charge settings.
1. Energy available: Displays the remaining energy available in the high voltage Battery
. To show the remaining energy as
estimated driving distance (miles or kilometers) rather than a percentage, touch Controls > Display > Energy Display.
2. Set charge limit: Adjust the charge slider to the level of charging you want. The setting you choose applies to immediate
and scheduled charging sessions.
NOTE: Refer to the information on the touchscreen (navigate to Controls > Charging) or mobile app (touch the Charging
icon) for recommended daily and trip charging limits.
NOTE: A portion of the Battery image may appear blue. This indicates that a small portion of the energy stored in the
Battery is not available because the Battery is cold. This is normal and no reason for concern. When the Battery warms up,
the blue portion no longer displays.
Open/Unlock Charge Port
When not charging, touch Open Charge Port or Unlock Charge Port to open the charge port door or to unlock the charge cable
from the charge port.
Stop Charging
Use Stop Charging when you are finished charging.
Charge Current at this Location
The current automatically sets to the maximum current available from the attached charge cable, unless it was previously
reduced to a lower level. If needed, touch - or + to change the current (for example, you may want to reduce the current if you
are concerned about overloading a domestic wiring circuit shared by other equipment). It is not possible to set the charging
current to a level that exceeds the maximum available from the attached charge cable. When you change the current,
Model SModel XModel 3Model Y remembers the location.
NOTE: When charging with the Mobile Connector, your vehicle may automatically select a default charge current. Override this
default current to a higher setting by customizing Charge Current at this location or through the mobile app.
If Model SModel XModel 3Model Y is charging and detects unexpected fluctuations in input power, the charging current is
automatically reduced by 25%. For example, a 40 amp current is reduced to 30 amps. This automatic current reduction
increases robustness and safety in situations when an external problem exists (for example, a home wiring system, receptacle,
adapter or cord is unable to meet its rated current capacity). As a precaution, when Model SModel XModel 3Model Y
automatically reduces current, it saves the reduced current at the charging location. Although you can manually increase it,
Tesla recommends charging at the lower current until the underlying problem is resolved and the charging location can provide
consistent power.
1350
Owner's Manual
Charging and Energy Consumption
Supercharging
Displays Supercharger usage fees, the location, the time that charging started, and a cost estimate for the session. To reduce
congestion at high-usage Supercharger sites, you may be limited to a maximum charge of 80% when not using Trip Planner (if
available in your market region). See Supercharger Fees on page 1351.
NOTE: Tesla does not recommend using low-power charging equipment (such as a 120V NEMA 5-15 outlet and the Universal
Mobile Connector) to charge , especially in low ambient temperatures. Due to the size of the high voltage Battery, charging
with equipment that produces less than 2 kW of power will charge very slowly. If you are charging with such a method, turn off
climate to reduce idle power consumption while charging.
Supercharger Fees
When charging at a Tesla Supercharger
, information about the charging session displays at the bottom of the charging screen.
This includes the location, the time that charging started, and a cost estimate for the session. When you stop Supercharging,
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: fsd_12-5-1-2_082024.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-08-31
MFR Internal Campaign ID/Software Version: fsd-12-5-1-2
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




