Loading...

NHTSA ID Number: 10253672

Manufacturer Communication Number: Index380

TSB/Document Date: 2024-04-29


Summary

TeslaeBay logo does not provide physical owner's manual copies. Instead, all available owner?s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner?s manual content for 2021-2024 Model X vehicles converted to PDF format, and given the distribution method and NHTSA?s submission format requirements, it is the best available representative copy of owner?s manual content. However, a customer who accesses the owner?s manual via their vehicle?s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.


Owners documentation

Contents
Index380

Owners Manual
Overview
Exterior
NOTE: Depending on market region, vehicle configuration, and options purchased, your vehicle may look slightly
different than described.

1. Exterior lights (Lights on page 111)
2. Door handles (Doors on page 33)
3. Charge port (Charging Instructions on page 235)
4. Autopilot cameras (Cameras on page 22)
5. Exterior mirrors (Mirrors on page 105)
6. Front bumper
7. Hood/Front trunk (Front Trunk on page 45)
2

Owners Manual
8. Front/rear tow eye cover (Instructions for Transporters on page 289)
9. Wheels and tires (Wheels and Tires on page 281)
10. Rear view camera (Rear Facing Camera(s) on page 134)
11. Tow hitch cover (Towing and Accessories on page 137)
12. Rear trunk/liftgate (Rear Trunk on page 42)
13. Ultrasonic sensors, if equipped (Park Assist on page 124 and Cameras on page 22)

Interior Overview
NOTE: Illustrations are provided to improve conceptual understanding only. Depending on vehicle options purchased
and market region, the design may differ but the function is the same.

1. Interior door handles (Doors on page 33)
2. Left steering yoke (or steering wheel) buttons
◦ Left Scroll Button (Left Scroll Button on page 102)
High Beam Headlights (Lights on page 111)
Turn Signals (Lights on page 111)
3. Instrument panel (Instrument Panel on page 15)
4. Right steering yoke (or steering wheel) buttons
◦ Right Scroll button to control Autopilot features (Right Scroll Button on page 103)
Horn (Horn on page 103)
Wipers (Wipers and Washers on page 116)
3

Owners Manual
◦ Voice Commands (Voice Commands on page 20)
5. Touchscreen (Touchscreen on page 5)
6. Camera (Cabin Camera on page 197)
7. Cabin climate control (Operating Climate Controls on page 207)
8. Power window switches (Opening and Closing on page 39)
9. Manual door release (Doors on page 33)
10. Seats (Front and Rear Seats on page 49)
11. Brake pedal (Braking and Stopping on page 118)
12. Accelerator pedal (Acceleration Modes on page 129)
13. Wireless phone chargers (Wireless Phone Chargers on page 12)
14. Hazard warning lights (Hazard Warning Flashers on page 114)
15. Secondary drive mode selector (Shifting on page 107)
16. Glovebox (Glovebox on page 48)

1. Rear touchscreen (Rear Touchscreen on page 8)

4

Owners Manual
2. USB ports (USB Ports on page 11)
3. Rear cup holders (Interior Electronics on page 11)
4. Adjustable climate control vents (Operating Climate Controls on page 207)

Touchscreen
In addition to the instrument panel, Model X is equipped with a front and rear touchscreen.
NOTE: Throughout this Owner's Manual, the front touchscreen is referred to as the "touchscreen" whereas the rear
touchscreen is referred to as the "rear touchscreen".
WARNING: Always pay attention to road and traffic conditions when driving. To minimize driver distraction and
ensure the safety of vehicle occupants as well as other road users, avoid using the touchscreen to adjust
settings while the vehicle is in motion.
Use the touchscreen to control many features that, in traditional cars, are controlled using physical buttons (for
example, adjusting the cabin heating and air conditioning, headlights, etc.). You also use the touchscreen to control
media, navigate, use entertainment features, and customize Model X to suit your preferences. For hands-free access
to common touchscreen controls, use voice commands (see Voice Commands on page 20).
If the touchscreen is unresponsive or demonstrates unusual behavior, you can restart it (see Restarting the
Touchscreen on page 8).
NOTE: Illustrations are provided to improve conceptual understanding only. Depending on vehicle options, software
version, market region and regional and language settings, the details displayed on the screen will differ.

1. Navigation: Change the orientation of the map, find or navigate to a destination, and change navigation settings
(see Maps and Navigation on page 218).
2. Status bar: Find car controls and status in the top bar (see Top Status Bar Icons on page 7).
5

Owners Manual
3. Drive mode strip: Use to shift into Park, Reverse, Neutral, or Drive. The drive mode strip always displays on the
touchscreen when you touch Controls. (See Shifting on page 107.)
4. Controls: Control various features and customize Model X to suit your preferences. The Controls screen appears
over the map. Touch an option on the Controls screen to display the various settings and preferences associated
with the chosen option.
To search for a specific setting, touch Search at the top of the Controls screen. Make changes directly from the
result or touch the link to jump to that option in Controls.
When an information icon displays beside a specific setting, touch it to display a popup that
provides helpful details about the associated setting.

NOTE: You can also access Controls by touching anywhere on the side of the touchscreen closest to the driver
and swiping open.
NOTE: Many vehicle controls, settings, and preferences (such as climate, media, and navigation) can be adjusted
hands-free using voice commands (see Voice Commands on page 20).
NOTE: You can send touchscreen feedback to TeslaeBay logo by long-pressing this icon.
5. Climate controls (driver): Use the left and right arrows to decrease/increase cabin temperature. Touch Split on
the popup to display separate controls for the driver and passenger. Touch the temperature icon to customize
climate control settings (see Operating Climate Controls on page 207). The passenger climate controls display
when temperature controls have been Split to provide separate controls for the driver and passenger.
6. My Apps: For one-touch access to frequently used apps and controls, you can choose what displays here. See
Customizing My Apps on page 6.
7. App Launcher: Touch the app launcher to open the app tray. Then touch any app to open it. The app you choose
displays on top of the map. To close an app, drag it downward.
NOTE: You cannot completely close Media Player. When you drag Media Player down, it displays MinieBay logo-Player
which allows you see what's playing, pause/play, and skip reverse/forward.
8. Recent App(s): Displays the most recently used app(s). The number of recent apps displayed here depends on
how many apps have been added to My Apps. If you add the maximum number of apps to My Apps, only the
most recent app displays.
9. Climate controls (passenger): Displays when temperature controls have been Split to provide separate controls
for the driver and passenger.
10. Volume Control: Controls the volume of media player and phone calls (see Volume Controls on page 226). The
volume of navigation instructions is controlled separately (see Maps and Navigation on page 218).
11. Media Player: See Media on page 225.

Customizing My Apps
For one-touch access to commonly used apps and controls, you can customize what displays in the My Apps area on
the touchscreen's bottom bar:
1. Enter customization mode by touching and holding any app or control in the My Apps area. If this area is empty,
touch the App Launcher.
2. Drag any app or control from the app tray onto the My Apps area in the bottom bar.
NOTE: Seat heaters selected from the app tray appear next to the temperature, instead of in the My Apps area.
NOTE: When you've added the maximum number of apps or controls to My Apps, adding an additional app removes
the rightmost app.
NOTE: Remove an app or control from the My Apps area by touching and holding, then touching its associated "X".

6

Owners Manual
Top Status Bar Icons
Touch to lock/unlock all doors and trunks.

4:20 pm

Your vehicle automatically updates the time. If the time is incorrect, confirm your vehicle has internet
and GPS connectivity with the latest software.
Displays on the touchscreen status bar only when Model X detects a programmed HomeLink within
range, and the touchscreen is not already displaying the HomeLink screen or popup. See Smart
Garage on page 95.

Displays on the touchscreen status bar only when Model X is parked. Add, configure (including Valet
Mode and Use Easy Entry), or quickly switch driver profiles. Driver profiles can also be accessed from
the top of any Controls screen. See Driver Profiles on page 130.

Available when Model X is parked, touch to manually enable or disable Sentry Mode for the current
drive cycle. To automatically turn Sentry Mode on (or off) every time you leave your vehicle, enable
the setting from Controls > Safety > Sentry Mode. See Sentry Mode on page 203 for more
information.
NOTE: If you turn Sentry Mode on or off from Controls > Sentry Mode, the shortcuts on the vehicle's
touchscreen and mobile app will only work for the current drive cycle.
Displays when Model X is connected to a Wi-Fi network.

Displays when Model X Connected to cellular network. Touch this icon for quick access to Wi-Fi
settings.

Displays when Model X cellular connectivity is or unavailable. Touch this icon for quick access to WiFi settings.

Status of the front passenger airbag (see Airbags on page 76).

Appears when your vehicle's GPS location is actively being accessed in the TeslaeBay logo mobile app by the
owner, an added driver, or a third party app you're using. To disable, navigate to Safety > Allow
Mobile Access on the touchscreen.

Popup Messages and Vehicle Alerts
Popup messages appear at the bottom of the touchscreen. For example, a seat belt reminder appears if a seat belt is
unfastened in an occupied seat, an alert appears to notify you of an incoming phone call, a text message appears
(when applicable), and voice commands appear when in use. If applicable, touch options from these popup
messages (for example, accept/decline a phone call, choose an option from the headlight menu, etc.). To dismiss a
popup message, swipe it downward.
7

Owners Manual

If an alert appears on your vehicle's touchscreen, touch Learn More for more details regarding the alert and how it
can be resolved. You can view a list of vehicle alerts and notifications by touching the bell icon at the top of
Controls.
NOTE: Not all alerts provide additional information at this time.
Restarting the Touchscreen
You can restart your touchscreen if it is unresponsive or demonstrates unusual behavior.
NOTE: To ensure the safety of occupants as well as other road users, restart the touchscreen only when the vehicle is
in Park.
1. Shift into Park.
2. Hold down both scroll buttons on the steering yoke (or steering wheel) until the touchscreen turns black.
Pressing the brake pedal while holding down the scroll buttons does not have any impact and is not required.

3. After a few seconds, the TeslaeBay logo logo appears. Wait approximately 30 seconds for the touchscreen to restart. If the
touchscreen is still unresponsive or demonstrating unusual behavior after a few minutes, try power cycling the
vehicle (if possible). See Power Cycling the Vehicle on page 100.
NOTE: Restarting the touchscreen also activates the drive mode selector on the center console.
NOTE: Pressing the scroll buttons only restarts the touchscreen. It does not restart any other vehicle component and
does not power Model X off and on.
Tilt the Touchscreen (if equipped)
To tilt the touchscreen, navigate to Controls, then touch the display icon to choose the desired position.
WARNING: When the center display is tilting, ensure that there are no objects (such as your fingers or jewelry)
between the screen and instrument panel to reduce the risk of injury or damage.
Rear Touchscreen
The rear touchscreen provides rear passengers with access to:

8

Owners Manual

1. Temperature: Touch the arrows to decrease/increase cabin temperature.
2. Power: Touch to turn the rear climate control system on or off.
3. Rear fan: Touch to turn the rear fan on or off, to adjust fan speed and control the direction of air flow from the
rear vents (see Adjusting the Front and Rear Vents on page 212).
4. Seats: Control rear seat heaters and move the front passenger seat forward/rearward using the arrows.
5. Media: Play, pause, skip or rewind through the currently playing song (see Media on page 225).
6. Video: Access video streaming services.
7. Auto: If Auto is enabled and a passenger is detected, the set temperature is maintained for the rear cabin.
NOTE: Enable Sync on the rear tab of the front touchscreen's climate controls to set both the front and back
cabin temperatures.
8. Volume: Touch to adjust the volume.
NOTE: You can also use the front touchscreen to adjust climate settings in the rear cabin (see Adjusting Climate
Control Settings on page 207).
NOTE: Adjusting the media and volume controls also adjusts the front cabin settings.
You can pair Bluetooth Classic headphones by navigating to Bluetooth Devices and adding new headphones on the
rear touchscreen. Once connected, you can use the headphones to listen to audio from the rear touchscreen. The
vehicle supports up to two Bluetooth devices at a time (such as one phone and one headset).
NOTE: Some vehicles manufacture before approximately September 2021 may require additional hardware to be
compatible with wireless headphones. If the touchscreen displays this message, use the mobile app to schedule a
service appointment.
Control the rear screen from the front

To control the rear touchscreen from the front, open the rear screen remote control app in the bottom
bar on the front touchscreen. Besides audio, video and climate controls, you can lock the rear display in
the app or by touching Controls > Display > Lock Rear Display.

Customizing Display and Sound Settings
Touch Controls > Display to adjust display settings to suit your preferences:
• Appearance: Customize the display to be Dark or Light. When set to Auto, the brightness changes automatically
based on ambient lighting conditions.

9

Owners Manual
• Brightness: Drag the slider to manually control the brightness level. If Display Mode is set to Auto, the
touchscreen further adjusts based on both the ambient lighting conditions and your brightness preference.
Model X remembers your chosen brightness preference and adjusts the touchscreen accordingly.
• Screen Clean Mode: When enabled, your touchscreen darkens and temporarily disables to facilitate cleaning.
Follow the onscreen instructions to exit Screen Clean Mode.
• Touchscreen Language: Select the language that the touchscreen displays.
NOTE: Model X must be in Park to change the language. When you change the language, you experience a brief
delay as Model X shuts down and restarts the touchscreen.
• Voice Recognition Language: Choose the language to be used for voice commands.
• Voice Navigation Language: Choose the language that the navigation system uses for spoken instructions.
NOTE: For languages that require a download, select the language in the dropdown list to initiate the download
(Wi-Fi connection required).
• Lock Rear Display: Lock access to the rear touchscreen.
• Time: Choose to display time in either 12 or 24 hour format.
• Energy Display: Choose to display remaining energy and charging units as either a percentage of battery energy
remaining, or as an estimate of the distance you can drive.
NOTE: When anticipating when you need to charge, use energy estimate as a general guideline only. Many factors
have an impact on energy consumption. See Factors Affecting Energy Consumption on page 244.
• Distance: Choose to display measurements in metric (kilometers, centimeters, etc.) or imperial (miles, inches, etc.)
units.
• Temperature: Choose to display temperature using Fahrenheit or Celsius.
Tire Pressure: Choose to display tire pressures using BAR or PSI.
In addition to customizing the display, you can enable Joe Mode to reduce the volume of all chimes that are not
related to critical safety issues. Touch Controls > Safety > Joe Mode to enable.
Naming your Vehicle
To further personalize your vehicle, you can name it. Touch Controls > Software > Name Your Vehicle located on the
right side of the touchscreen below the image of Model X. If your vehicle already has a name, touch the existing
name to change it. Enter the new name in the popup and touch Save. The name of your Model X also appears in the
TeslaeBay logo mobile app.
Erasing Personal Data
You can erase all personal data (saved addresses, music favorites, HomeLink programming, etc.) and restore all
customized settings to their factory defaults. This is useful when transferring ownership of Model X. Touch Controls
> Service > Factory Reset. Before erasing, Model X verifies your credentials by prompting you to enter the user
name and password associated with your TeslaeBay logo account.

10

Owners Manual
Interior Electronics
In addition to storage compartments and cup holders (see Interior Storage on page 48), the Model X interior
supports various electronics such as USB ports, wireless phone chargers, and a 12V power socket.
USB Ports
Model X has five USB ports:
• Two USB ports are located in the front compartment of the center console. These can be used to charge USB
devices and to play audio files from a phone or USB device (see Playing Media from Devices on page 227).
• Two USB ports are located below the rear touchscreen that can be used to charge USB devices.
• One USB port is located inside the glovebox. This port is equipped with a USB flash drive. The secure location of
this USB port makes it ideal for saving Sentry Mode and Dashcam video footage.
The USB ports can output power up to approximately 27W (which may vary depending on vehicle manufacture
date).
See USB Drive Requirements for Recording Videos on page 205 for information about formatting USB flash drives.
To access the front USB ports, open the front compartment of the center console. The front USB ports are located
on the rear wall of the compartment:

Rear USB ports are located below the rear touchscreen:

11

Owners Manual
Glovebox USB port:

NOTE: Power is available whenever the vehicle is considered "awake". The vehicle may be awake for many reasons.
For example, when using features such as Summon, or when features such as Keep Climate On, Dog Mode, Camp
Mode, or Sentry Mode are enabled. The vehicle is also awake whenever the low voltage battery is being charged or is
in use, during high voltage charging, when the vehicle is communicating with the mobile app, etc. Leaving an
accessory plugged in does not deplete the low voltage battery.
NOTE: Use USB 3.0 compliant cables to connect a device to a USB port. Using non-compliant cables can result in
slower charging, potential connection problems or degraded performance.
NOTE: Do not connect multiple devices using a USB hub. This can prevent connected devices from charging or from
being recognized by Media Player, Sentry Mode, Dashcam, etc.
Wireless Phone Chargers
Wireless phone chargers are integrated into the front console, providing up to 15W of power to charge Qi-enabled
phones. To charge your phone, place it on one of the two charge pads. The phone must be in direct contact with the
wireless charger. Do not place objects between the phone and the charger (for example, credit cards, key cards,
coins, keys, metal objects, etc.). Your device may feel warm while charging, but this is a normal effect of inductive
charging.

When placed on the wireless charger, your phone charges whenever the vehicle is powered on (the touchscreen is
on and you are in the vehicle). Your phone does not charge when you leave the vehicle unless a feature, such as
Keep Climate On, Dog Mode, Camp Mode, or Sentry Mode is enabled.
NOTE: The wireless phone charger may not work if your phone case is too thick or is made of metal. Try removing
the phone from its case before placing it on the charger.
12

Owners Manual
NOTE: The wireless phone charger does not charge if the vehicle's high voltage BatteryeBay logo is discharged.
Low Voltage Power Socket
Your Model X has a power socket located in the center console's compartment. To access the low voltage socket,
open the front compartment of the center console.

The power socket is suitable for accessories requiring up to 12A continuous draw (16A peak).
NOTE: Power is available whenever the vehicle is considered "awake". The vehicle may be awake for many reasons.
For example, when using features such as Summon, or when features such as Cabin Overheat Protection, Keep
Climate On, Dog Mode, Camp Mode, Sentry Mode, etc. are enabled. The vehicle is also awake whenever the low
voltage battery is being charged or is in use, during high voltage charging, when the vehicle is communicating with
the mobile app, etc. Leaving an accessory plugged in does not deplete the low voltage battery.
WARNING: The power socket and an accessory’s connector can become hot.
WARNING: To prevent excessive interference with the vehicle’s electronics, TeslaeBay logo recommends that you do not
plug any non-TeslaeBay logo accessories, including power inverters, into the low voltage power socket. However, if you
do use a non-TeslaeBay logo accessory and notice any malfunctions or unexpected behavior, such as indicator lights,
alert messages, or excessive heat from the accessory, unplug the accessory from the low voltage power socket
immediately.
NOTE: A power inverter plugged into the low voltage power socket must support 16V DC input to function.
CAUTION: Do not attempt to jump start Model X using the low voltage power socket. Doing so can result in
damage.
Active Road Noise Reduction
Model X is equipped with Active Road Noise Reduction which reduces low-frequency road noise while driving on
rough surfaces. To accomplish this, the vehicle uses the seat microphones to measure noise in the cabin, then
generates anti-noise through the speakers to intelligently create quiet zones around the front occupants depending
on vehicle and environmental factors.

13

Owners Manual

To turn Active Road Noise Reduction on or off, open the Media Player and touch Audio Settings icon > Options >
Active Road Noise Reduction (the audio settings icon shows an equalizer with three vertical lines). This may require
several minutes of driving time to calibrate before enabling.
NOTE: To ensure active noise reduction operates effectively, avoid covering the microphones (with seat covers, etc.).
Active Road Noise Reduction may disable if a window is rolled down, door is open, or the fan is turned up. Active
Road Noise Reduction also disables if there is a rear passenger in the vehicle.
CAUTION: To prevent damage to these microphones when cleaning, do not over-saturate the area of the seats
where the microphones are located.

14

Owners Manual
Instrument Panel
Instrument Panel Overview
The instrument panel changes depending on whether Model X is:
• Off or Parked (shown below).
• Driving (see Instrument Panel - Driving on page 16).
• Charging (see Charging Instructions on page 235).
When Model X is off or Parked, the instrument panel shows remaining estimated range, vehicle status, and outside
temperature.
1. When the car is off and you initially press the brake, indicator lights flash briefly along the top of the instrument
panel. Unless an indicator light applies to a current situation, it should turn off. If an indicator light fails to turn on
or off, refer to Indicator Lights on page 17.
2. An image of your car and its accompanying status (such as lights on, door open, etc.).
3. Total estimated driving distance (or energy) available. Instead of driving distance, you can display the percentage
of battery energy remaining. To do so, touch Controls > Display > Energy Display.
NOTE: When anticipating when you need to charge, use estimates as a general guideline only.
4. Estimated outside temperature.
5. Pay attention to instructions or important alert messages that display here. If any alerts are in effect, you can view
information about them by touching Controls and then touching the bell icon located at the top of the screen.
6. Currently selected drive mode: Park, Reverse, Neutral, or Drive. If Auto Shift out of Park is enabled, Drive or
Reverse is automatically selected (based on sensor input) and displayed on the instrument panel when the
driver's door is closed and seatbelt is buckled (see Seat Belts on page 57).
7. Current time of day.
See Popup Messages and Vehicle Alerts on page 7 for more information about alert popups on your vehicle's
touchscreen.

15

Owners Manual
Instrument Panel - Driving
When Model X is driving (or ready to drive), the instrument panel shows your current driving status and a real-time
visualization of the road as detected by the Autopilot components. The visualization automatically zooms in and out
based on the detected road type.

NOTE: Touch Controls > Autopilot > Full Self-Driving Visualization Preview (if equipped) to display more details
about the roadway and its surroundings, such as road markings, stop lights, objects (such as trash cans and poles),
etc.
1. The instrument panel displays your location on a map, a wiper menu, Auto Shift out of Park instructions, etc.
When a navigation route is active, the upcoming portion of the route displays.
2. The speed limit (if available) that is currently being detected by Speed Assist (see Speed Assist on page 196).
3. Current driving speed.
4. The currently set cruising speed. When Traffic-Aware Cruise Control is available but you haven't set a cruising
speed by engaging Traffic-Aware Cruise Control or Autosteer, the icon is gray (see Autopilot Features on page
152).
5. Autosteer is actively steering Model X. When Autosteer is available but you haven't activated it, the icon is gray
(see Autosteer on page 153).
6. When navigating, upcoming instructions in the navigation route appear here.
7. Total estimated driving distance (or energy) available. Instead of driving distance, you can display the percentage
of battery energy remaining (touch Controls > Display > Energy Display).
NOTE: When anticipating when you need to charge, use estimates as a general guideline only.
8. Surrounding road users are shown in their corresponding locations.
WARNING: Although the instrument panel shows surrounding traffic, some vehicles may not be displayed.
Never rely on the instrument panel to determine if a vehicle is present (for example, in your blind spot).
Always use your mirrors and perform shoulder checks.
9. Your Model X.

16

Owners Manual
10. The power meter displays real-time power usage. During acceleration, the bar fills to the right to represent power
being used. During deceleration (when Model X is moving and you release your foot from the accelerator pedal),
the bar fills to the left with a green color to represent power being fed back to the Battery by regenerative
braking (see Regenerative Braking on page 119).
11. When Autosteer is active and detects the driving lane, it is highlighted in blue (see Autopilot Features on page
152). Depending on the current driving scenario, you may see neighboring lanes.
NOTE: In situations where Autosteer is unable to detect lane markings, the driving lane is determined based on
the vehicle you are following.
NOTE: If Navigate on Autopilot is active, the driving lane displays as a single blue line in front of Model X (see
Navigate on Autopilot on page 155).

Indicator Lights
Indicator lights display along the top of the instrument panel to show status and alert you of specific vehicle
conditions.
Indicator

Description
A brake system fault is detected or the brake fluid level is low. See Braking and Stopping on page 118.
Contact TeslaeBay logo immediately.
A brake booster fault has been detected. See Braking and Stopping on page 118.
An ABSeBay logo (Anti-lock Braking System) fault is detected. See Braking and Stopping on page 118. Contact
TeslaeBay logo immediately.
A parking brake fault is detected. Contact TeslaeBay logo. See Parking Brake on page 120.
The parking brake is manually applied. See Parking Brake on page 120.
Tire pressure warning. The pressure of a tire is out of range. If a fault with the Tire Pressure Monitoring
System (TPMS) is detected, the indicator flashes. For a TPMS fault, contact TeslaeBay logo. See Tire Care and
Maintenance on page 251.

A seat belt for an occupied seat is not fastened. See Seat Belts on page 57.

Airbag safety. If this red indicator does not flash on briefly when Model X prepares to drive, or if it
remains on, contact TeslaeBay logo immediately. See Airbags on page 76.

Front fog lights are on, if equipped. See Lights on page 111.

Parking lights (side marker lights, tail lights, and license plate lights) are on. See Lights on page 111.

17

Owners Manual
Indicator

Description

Low beam headlights are on.

High beam headlights are on. Illuminates when high beams are on but the Auto High Beam setting (if
equipped) is turned off or if the Auto High Beam setting is turned on but is temporarily unavailable.
See Lights on page 111.

High beam headlights are currently turned on, and Auto High Beam (if equipped) is ready to turn off
the high beams if light is detected in front of Model X. See Lights on page 111.

High beam headlights are temporarily turned off because Auto High Beam (if equipped) is on and is
detecting light in front of Model X. When light is no longer detected, the high beams automatically
turn back on. See Lights on page 111.

If a fault is detected with the Adaptive Front Lighting this indicator displays, if equipped. See
Adaptive Front Lighting System (AFS) on page 113.

This indicator flashes amber when the electronic stability control systems are actively minimizing
wheel spin by controlling brake pressure and motor power. See Traction Control on page 128. If this
indicator remains on, a fault is detected and you should immediately contact TeslaeBay logo.

If a fault is detected that reduces the performance of the air suspension system, this amber indicator
light displays (see Air Suspension on page 122). If the problem persists, contact TeslaeBay logo.

If a fault is detected that disables the air suspension system, this red indicator light displays (see Air
Suspension on page 122). Contact TeslaeBay logo.

Vehicle Hold is actively applying the brakes. See Vehicle Hold on page 127.

Electronic stability control systems are no longer minimizing wheel spin. See Traction Control on page
128.

Model X is in Transport mode and can roll freely. It does not automatically shift into Park when you
exit. See Activate Transport Mode on page 290.

18

Owners Manual
Indicator

Description

Trailer mode (if equipped) is active. See Towing and Accessories on page 137.

A blue snowflake appears when some of the energy stored in the Battery may not be available due to
cold weather conditions. During these cold weather conditions, charging rates may also be limited. If
Model X is plugged in, you can heat your Battery by turning on climate control with the mobile app.
The snowflake disappears when the Battery is sufficiently warm.
A green icon appears when regenerative braking is limited. See Regenerative Braking on page 119 for
more information.

Vehicle power is currently being limited because the energy remaining in the Battery is low, the
vehicle's systems are being heated or cooled, or an error is detected by the drive inverter.

19

Owners Manual
Voice Commands
NOTE: Voice commands are not available in all languages. To choose the language you want to use for voice
commands, touch Controls > Display > Voice Recognition Language.
Use voice commands to easily control settings and preferences without using the touchscreen. Voice commands are
designed to understand natural requests. Use them to:
• Adjust climate preferences.
• Tweak the windshield wiper speed and frequency.
• Control various aspects of your vehicle.
• Navigate to a location.
• Call a contact.
• Interact with apps and settings.
To initiate a voice command, fully press the microphone button on the right side of the steering yoke (or steering
wheel). When a chime sounds, make your request, then Model X provides onscreen responses.

Examples of Voice Commands
Here is a list of example voice commands. This is not an exhaustive list. TeslaeBay logo is constantly working to improve voice
commands.
Climate Controls

Adjust your climate preferences using voice commands:
• "Make it cooler"
• "Make it warmer"
• "Turn on/off the driver's seat heater"
• "Cool down the passenger"
• "Direct airflow to my face"
• "Sync climate"
• "Increase/decrease the fan speed"
• "Turn on/off rear defroster"

20

Owners Manual
• "Set the temperature/fan..."
• "Turn on recirculate"
Windshield Wipers

Update the windshield wiper speed and frequency based on changing road and weather conditions:
• "Speed up the wipers"
• "Increase/decrease windshield wiper speed by..."
• "Turn on/off the wipers"
Vehicle Controls

You can also modify various controls in your vehicle using voice commands:
NOTE: Your vehicle must be in Park to enable some voice commands (such as Sentry Mode, Dog Mode, etc.).
• "Sentry Mode on/off"
• "Keep my car safe"
• "Lock/unlock the doors"
• "Turn on Dog Mode"
• "Fold/unfold the mirrors"
• "Open/close charge port"
• "Start/stop charging"
• "Open service settings"
• "Open the glovebox"
Navigation

To search for, or navigate to, a location, say:
• "Where is [location]?"
• "Drive to [location]"
• "Navigate to [location]"
• "Show nearby Superchargers"
• "I'm feeling hungry/lucky" (see Maps and Navigation on page 218).
• "Stop navigation"
• "Mute voice guidance"
If you have defined a navigation address for your home or work locations, you can use a voice command to navigate

12345...26

SaleBestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
289 Reviews
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an...
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool...
  • Proven Performance You Can Trust: Backed by over 10000 real...
  • Integrated Excellence, Always Up-to-Date: Featuring the...
  • Efficiency Meets Versatility: Engineered to support three...
SaleBestseller No. 2
TOPDON RLink J2534 Reprogramming Tool, High-Speed J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Supports J2534/D-PDU/CAN-FD/DoIP, 17+ Vehicle Brands Supported
  • Advanced VCI Box, Industry-leading J2534 Pass-Thru...
  • High-Speed OEM-Level Diagnostics & Programming: Unlock true...
  • Coverage for 17 Car Brands & Ultra Reliability: Works...
  • User-Friendly RLink Platform & Expert Support: TOPDON’s...
  • 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...

Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API


 


If the PDF is very large, it may not load in the preview below.

Download PDF [9.38 MB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: Index380

Replacement Service Bulletin Number:

MFR Communication Date: 2024-03-30

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: EQUIPMENT

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
108 Reviews
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABSeBay logo, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.

Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API


 

Sale
XTOOL D7S Bidirectional Scan Tool, 2026 AI-Assisted OBD2 Scanner Diagnostic Tool with FCA AutoAuth, All System Car Scanner, 39+ Resets, ECU C0ding, PMI, Upgrade of D7, Crankshaft Relearn, CAN FD/DoIP
334 Reviews
XTOOL D7S Bidirectional Scan Tool, 2026 AI-Assisted OBD2 Scanner Diagnostic Tool with FCA AutoAuth, All System Car Scanner, 39+ Resets, ECU C0ding, PMI, Upgrade of D7, Crankshaft Relearn, CAN FD/DoIP
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABSeBay logo Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABSeBay logo Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
  • Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently

Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API


 

2026 BOSSCOMM IF745 Scanner Diagnostic Tool, Check Engine Code Reader with 6 Resets, ABS Bleeder/Oil/EPB/SAS/Throttle/Battery, Scanner Diagnostic Tool for Vehicles, Lifetime Free Update, Auto VIN
  • 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABSeBay logo/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABSeBay logo/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
  • 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
  • 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
  • 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.​
  • 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.

Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API


 


This product presentation was made with AAWP plugin.

Share to...