CASTROL OPEN GEAR LUBRICANT SPRAY

CASTROL HEAVY DUTY MULTI-PURPOSE ATF

Castrol SAF AM 80W-90 is a multipurpose semi-synthetic gear lubricant approved for gears and bearings in axles (front, drive and trailer) as well as
most manual transmissions. It offers protection against premature bearing failure and exhibits superior seal compatibility. Castrol SAF AM 80W-90 is
suitable for all heavy-duty, on- and off-road truck, construction equipment, marine, and bus applications. It has been specifically developed to offer
extended drain capability in Arvin Meritor hypoid axles.

Castrol Heavy Duty Multi-purpose ATF is a multi-purpose power transmission fluid that is designed for most power transmission and hydraulic
systems. Castrol Heavy Duty Multi-Purpose ATF meets the Allison TES-389 AA-32252007 and Allison C-4 specifications.

Castrol Open Gear Lubricant Spray is for hard to reach areas that Castrol Open Gear Lubricant 3330 cannot lubricate. Castrol Gear Spray protects
gears from excessive wear, rust and corrosion. It eliminates the need for messy pails, brushes, paddles and grease guns. Castrol Open Gear Spray is
effective on most open gear machinery and equipment.

CASTROL SAF AM 80W-90
SAE

80W-90

Gear Lubricants

CASTROL WORM GEAR LUBRICANT

CASTROL SYN-GEAR LUBRICANTS

AGMA #
ISO GRADE

SAE

75W-90

80W-140

Castrol Syn-Gear Lubricants are heavy-duty synthetic oils that provide cold weather performance and stability under higher than normal operating
temperatures. Castrol Syn-Gear Lubricants meet API GL-5, API MT-1 (75W-90), SAE J2360 (Formerly MIL-PRF-2105E), Dana SHAES 429 Rev. A,
Dana SHAES 256 Rev. C (75W-90), Meritor 076-N (75W-90), 076-M (80W-140) and Mack GO-J Plus (75W-90). Accepted by Eaton Corporation
as alternatives to their Eaton Roadranger Lubricants.

7 Comp
460

8 Comp
680

8A Comp
1000

Castrol Worm Gear Lubricant excels in industrial worm gears where high starting loads are experienced. It is compounded to provide extra lubricity
and friction modification under heavy loads and temperatures.

CASTROL AP GEAR LUBRICANT
SAE

80W-90

85W-140

Castrol AP Gear Lubricant is a multi-purpose, thermally stable gear lubricant for use in manual transmissions and transaxles where manufacturers
specify an API GL-5, API MT-1 (80W-90), Mack GO-J or SAE J2360 (formerly MIL-PRF-2105E) lubricant. Castrol AP Gear Lubricant is acceptable for
use by many manufacturers including but not limited to BMW, Dodge, Eaton, Ford Motor Company, General Motors and Rockwell International.
Castrol AP Gear Lubricant is J2360 (Formerly MIL-PRF-2105E) approved.

CASTROL ISOLUBE
ISO GRADE

150

220

320

NOTES

460

Castrol Isolube is a synthetic lubricant with technically advanced chemistry that excels in applications requiring optimum oxidation control and
thermal stability, consistent anti–wear performance and low carbon-forming tendencies. Castrol Isolube provides excellent performance in circulating
oil and gear set applications and in compressors.

1 800 255 4417

www.castrol.com/us

castrol_product_cataloge.qxp:castrol_product_catalog

11/2/07

12:34 PM

Page 4

Greases 5

4 Hydraulic Fluids

Hydraulic Fluids

CASTROL PARADENE R & O

CASTROL DUAL RANGE HV

Castrol Paradene R & O is a premium quality rust and oxidation inhibited lubricant with excellent water separation ability. Castrol Paradene R & O is
tailored to meet the needs of non anti-wear hydraulic and circulating systems, as well as non-EP gear oil applications.

ISO
FORMER GRADE

22
–

ISO
32
–

46
(5W-20)

68
100
(15W-30) (GD)

CASTROL BLUE HYDRAULIC PLUS
32
(LIGHT)

46
(10)

68
(20)

32

46

68

100

150

220

320

460

Castrol Paradene AW combines high viscosity index base oil with foam, rust and corrosion inhibitors. It is blended in a wide range of viscosities
to meet requirements for rotary air compressors and anti-wear hydraulic and circulating systems. It provides outstanding long-term performance
and protection.

CASTROL ANVOL SWX FM
ISO GRADE

46

Greases
NLGI

CASTROL PARADENE AW
22

Castrol Premium Fluid 200 is a clear red, water glycol based fluid for hydraulic systems that require a fire resistant fluid with a viscosity of 200 SUS @ 100°F.

CASTROL PYROPLEX GOLD

100
(30)

Castrol Blue Hydraulic Plus meets the requirements of most manufacturers’ hydraulic equipment. Castrol Blue Hydraulic Plus offers excellent
hydrolytic stability in the presence of water and is very stable when used in hydraulic systems using vane and piston pumps. It is recommended
for use in hydraulic and circulating systems, enclosed gears, plain and anti-friction bearings including electric motors.

ISO

22

CASTROL PREMIUM FLUID 200

Castrol Dual Range HV is an exceptional quality, multi-viscosity hydraulic fluid designed for the most severe environments and applications in
construction and mining machinery under varying ambient conditions. Castrol Dual Range HV contains anti-wear additives and viscosity index
improvers which will remain in grade after maximum shear conditions.

ISO
FORMER GRADE

10

68

Castrol Anvol SWX FM is an HFDU polyol ester-type hydraulic fluid as defined by ISO 6743/4 and ISO 12922(1). It meets the requirements for
Factory Mutual Category 1 Classification. Castrol Anvol SWX FM provides a safe working environment, improved system reliability and ready
biodegradability. Formulated to work in high-pressure hydraulic systems up to 7500 psi, Castrol Anvol SWX FM provides gear, vane and piston
pumps with protection against wear equivalent to that of mineral oils. Castrol Anvol SWX FM is used in areas of the manufacturing industry
where there is high risk of fire such as hot strip mills, coil handling facilities, pipe mills and continuous casters. (1) per ISO 6743 / 4 and ISO 12922:1999 /
Corrigendum 1:2001 (E), these are classified as synthetic fluids free of water, but of other composition than HFDR (Phosphate Ester).

1

2

Castrol Pyroplex Gold is a super high performance, semi-synthetic, aluminum complex grease that excels in heavily-loaded equipment where
extreme operating conditions prevail. It contains a high level of synthetic solids, including 6% molybdenum disulfide, hydro-activated polymers
coupled with an aluminum complex thickener and carefully selected semi-synthetic base fluids. It provides optimum “stay-in-place” ability in wet
or humid environments.

CASTROL PYROPLEX BLUE
NLGI

0

1*

2

Castrol Pyroplex Blue protects plain and anti-friction bearings under severe conditions where water, dust and pressure are present. It is designed to
operate in wet environments over a wide temperature range. Castrol Pyroplex Blue’s unique multifunctional solid lubricant additive actually builds
tack and adhesion when exposed to moisture and resists washout. Ideal for hinge and bucket pins, Castrol Pyroplex Blue's affinity for metal surfaces
is enhanced and lubricating film strength increases where high temperature performance, rust protection and extreme pressure properties are
required. *Meets NLGI specification GC-LB.

CASTROL PYROPLEX RED
NLGI

1

2

Castrol Pyroplex Red is a multi-purpose grease designed to operate over a wide temperature range. Its lithium complex base plus extreme pressure
additives exhibit good water resistance and mechanical stability in high temperature applications. It is suitable for disc brake bearings. Castrol
Pyroplex Red exceeds NLGI specification GC-LB.

CASTROL CARELUBE HTG – BIODEGRADABLE HYDRAULIC OIL

CASTROL PYROPLEX PROTECTION ES

ISO

NLGI

32

Castrol Carelube HTG is formulated from natural vegetable oils to be more environmentally acceptable than traditional hydraulic oils. It is
invaluable where leakage could cause soil or water contamination. Castrol Carelube HTG features a naturally high viscosity index base oil
(200 Vl) and can be considered where ISO 22, 32, 46 and 68 viscosity grades are specified within its operating range of 0° to 175°F. Castrol
Carelube HTG has demonstrated low toxicity, naturally high lubricity and anti-wear properties and delivers exceptional stay-in-grade performance
over its operating range.

CASTROL AERIAL LIFT FLUID
KV RATING

CASTROL HYALINE
10

22

2

Castrol Pyroplex Protection ES is a specially formulated synthetic, lithium complex grease designed for extended service performance in challenging
on-highway applications. It provides corrosion resistance, extreme pressure performance, enhanced hydroactivation technology for performance in
wet conditions and “stay-in-place” ability with outstanding mobility through all seasons.

CASTROL SHL 00
NLGI

00

Castrol SHL 00 is a synthetic, semi-fluid lubricant that provides excellent wheel end system lubrication, minimal leakage and exceptionally long
service. It delivers low- and high-end temperature performance with extreme pressure and anti-wear additives.

30

Castrol Aerial Lift Fluid is a specially formulated multi-viscosity hydraulic fluid. It displays noted performance in mobile lift applications where
extremes of temperature are encountered and system operation, reliability, dielectric strength and protection are mandatory. Castrol Aerial Lift
fluid has superior thermal, hydrolytic and oxidation stability.

ISO GRADE

1

32

150

220

320

460

CASTROL CONTRACTOR’S SPECIAL
NLGI

1

2

Castrol Contractor's Special contains 3% molybdenum disulfide. It is formulated to offer high temperature and heavy-duty performance with good
pumpability and shear stability. Castrol Contractor's Special excels in heavy-duty applications such as bucket pins and articulating joints where a
tough, durable lubricating film is mandatory.

Castrol Hyaline lubricants are highly refined paraffinic mineral oils for industrial applications where extreme pressure, anti-wear or rust and oxidation
inhibitors are not required.

CASTROL LT HYDRAULIC OIL
ISO GRADE

15

Castrol LT Hydraulic Oil is a special fluid suitable for hydraulic and lubrication applications involving very low or extreme temperature variation. It
can be used where wide temperature variations prevail or under special hydraulic conditions such as hydraulic equipment that travels in and out of
freezers, tilt truck cabs, electrical service equipment (cherry pickers) etc. (Please verify the OEM recommendation for the exact type of fluid required
before utilizing this product.)

NOTES

1 800 255 4417

www.castrol.com/us

castrol_product_cataloge.qxp:castrol_product_catalog

11/2/07

12:34 PM

Page 6

Specialty Products/Coolant/Antifreeze 7

6 Greases/Compressor Lubricants/Specialty Products
CASTROL HD LITHIUM
NLGI

000

CASTROL NON-DETERGENT MOTOR OIL
00

0

1

2

Castrol HD Lithium is a lithium 12-hydroxy stearate, multi-purpose, extreme pressure grease that exhibits excellent low and high temperature
performance, good water resistance and high shock load capacity. It excels in ball joint suspensions, universal joints, steering gears, anti-friction
bearings, plain bearings, slides, ways and jibs.

CASTROL FIFTH WHEEL GREASE
NLGI

2

Castrol Fifth Wheel Grease has been designed specifically for fifth wheel applications (on-highway vehicles) where stay-in-place performance is critical
under all weather conditions. Castrol Fifth Wheel Grease’s graphite/moly formulation and high percent tackifiers give it a true affinity for metal surfaces.

SAE GRADE

10W

20W-20

30

40

50

Castrol Non-Detergent Motor Oil is formulated from paraffinic base oils, which give it excellent fluidity at low temperatures, anti-foam protection
and high temperature stability. It meets the requirements of API SB.

CASTROL GT POWER STEERING FLUID
Castrol GT Power Steering Fluid has a carefully tested additive package which assures good performance. It contains a unique friction modifier to
reduce power steering pump “squeal.” Castrol GT Power Steering Fluid is approved by leading manufacturers, including GM/Saginaw, Ford and
Chrysler where applicable.

CASTROL RAILROAD ENGINE OIL

CASTROL OPEN GEAR 800

SAE GRADE

NLGI

Castrol Railroad Engine Oil is a high ash, railroad diesel engine oil that combines dispersant additives and inhibitors with a sustained high alkalinity to
provide excellent engine cleanliness and reduced maintenance costs. It meets the requirements for Electro-Motive Division (EMD) of General Motors,
MI-12009L (American Locomotive Company), General Electric, LMOA Generation III, IV and V and API CF/CF-2.

1

Castrol Open Gear 800 is a synthetic lubricant that quiets noisy gears, increases gear life, lowers lubrication costs and extends service intervals. It can
be used in industrial open gears, dipper sticks and cables and drill bit couplings

CASTROL ROCK DRILL OIL

Compressor Lubricants

ISO GRADE (FORMER GRADE)

CASTROL ISOLUBE
ISO GRADE

32

46

68

100

Castrol Isolube is a synthetic compressor fluid that excels in applications requiring optimum oxidation control and thermal stability, consistent antiwear performance and low carbon forming tendencies. It provides excellent performance in circulating oil applications and compressors engaged
in severe field and industrial conditions.

CASTROL PARADENE R & O
ISO

32

46

100

Castrol Paradene R & O is a premium quality rust and oxidation inhibited lubricant with excellent water separation ability. It is generally
recommended for rotary vane or rotary screw compressors.

CASTROL SYNCOM
ISO GRADE

32

46

68

100

150

Castrol Syncom is a high performance synthetic lubricant that is suitable for use in many types of air compressors to include reciprocating (piston)
and rotary compressors (sliding vane and cylindrical screw).

CASTROL AMMONIA COMPRESSOR OIL
ISO GRADE

68 (50 former grade)

Castrol Ammonia Compressor Oil has the low temperature performance and oxidation resistance necessary for the proper lubrication of industrial
refrigerating ammonia compressors. CAUTION: Ammonia compressor oil is not recommended for systems where sulfur dioxide (SO2) or Freon 11,
12, or 22 is the refrigerant.

CASTROL CHAIN & BAR OIL
ISO GRADE

100

Castrol Chain & Bar Oil is a specially refined lubricant for chains, bar guides and sprockets. Castrol Chain & Bar Oil contains a tackiness agent to
reduce throw-off.