NHTSA ID Number: 10128378
Manufacturer Communication Number: VW
WPP 06 2016
TSB/Document Date: 2018-02-05
Summary
This document identifies the warranty policies applicable for dealers.
vehicle misuse or neglect, as well as repairs that are (1) necessary for proper diagnosis of these
other conditions or (2) required to bring the vehicle up to factory specifications are not covered by
this warranty extension.
REPAIR PROCEDURE
Refer to Technical Bulletin Instance Number 2031583 for the applicable repair procedure.
VEHICLE ELIGIBILITY
To determine if a vehicle is eligible for the Engine Exhaust Flap Limited Warranty Extension, check the
VIN in ElsaPro > Vehicle Data. If the warranty extension is applicable to the vehicle, the "Enhanced
Coverage" section of the "Vehicle Data" screen in ElsaPro will be populated with the warranty
extension parameters.
SAGA WARRANTY CLAIM TYPE AND SERVICE NUMBER
Dealers must use the following claim type and service number when submitting warranty claims for the
Engine Exhaust Flap Limited Warranty Extension.
Claim Type:
110
Service Number:
2671
Volkswagen of America, Inc.
TABLE OF CONTENTS
INDEX
SEARCH
Warranty Policies and Procedures 06/16
FORWARD
BACK
PREVIOUS PAGE
NEXT PAGE
TABLE OF CONTENTS
INDEX
SEARCH
FORWARD
BACK
PREVIOUS PAGE
Policy Application from A to Z | Warranty Extensions
3.63.1.14
NEXT PAGE
Page 177
SECONDARY AIR PRESSURE SENSOR LIMITED WARRANTY EXTENSION
Volkswagen has extended the Emissions Control Systems Warranty for secondary air pressure sensor
replacement under specific conditions to 10 years or 120,000 miles, whichever occurs first, from the
vehicle’s original in-service date, for the following 2.5 L engine vehicles:
2009 MY Rabbit (A5) with Engine Codes CBUA and CBTA
2009 MY Jetta Wagon (A5) with Engine Codes CBUA and CBTA
2009 MY Jetta (A5) with Engine Codes CBUA and CBTA
2010 MY Jetta (A5) with Engine Code CBUA
2010 – 2012 MY Jetta SportWagen (A6) with Engine Code CBUA
2011 – 2012 MY Jetta (A6) with Engine Code CBUA
2012 MY Passat with Engine Code CBUA
2012 MY Beetle with Engine Code CBUA
2010 – 2012 MY Golf (A6) with Engine Code CBUA
Certain states have voluntarily adopted California-mandated emissions warranties only for vehicles
equipped to meet California’s Partial Zero Emissions Vehicle (PZEV) emissions requirements. These
vehicles can be identified by inspecting the Vehicle Emission Control Information Label located under
the hood. Because of this, the owner of a vehicle equipped to meet California’s PZEV emissions
requirements living in one of these states may have warranty rights that exceed the extended warranty
offering described in this bulletin. Owners should refer to the warranty information that came with their
vehicle for additional details as to whether or not this applies to their vehicle.
The vehicle’s original in-service date is defined as the date the vehicle was delivered to either the
original purchaser or the original lessee; or if the vehicle was first placed in service as a
"demonstrator" or "company" car, on the date such vehicle was first placed in service.
This warranty extension is fully transferable to subsequent owners.
WHAT IS THE PROBLEM
Volkswagen has determined that under specific conditions, certain deficiencies affecting the
secondary air pressure sensor could make the secondary air pressure sensor susceptible to degraded
performance. If this happens, the Malfunction Indicator Lamp (MIL) on the instrument cluster may
illuminate due to the presence of specific fault codes caused by a faulty secondary air pressure
sensor. (The MIL is part of the on-board diagnostic system. Please refer to the owner’s manual for
additional information about the MIL.) In some locales, an illuminated Malfunction Indicator Lamp
could cause the vehicle to fail an IM emissions inspection, and the vehicle registration application
could be denied. Volkswagen has not identified any vehicle drivability concerns related to this issue.
Please be aware that other conditions (unrelated to the issue described in this bulletin) may cause the
MIL in the vehicle to illuminate. Customers should be prepared to cover all diagnosis and repair costs
for these other, unrelated conditions.
Volkswagen of America, Inc.
TABLE OF CONTENTS
INDEX
SEARCH
Warranty Policies and Procedures 06/16
FORWARD
BACK
PREVIOUS PAGE
NEXT PAGE
TABLE OF CONTENTS
INDEX
SEARCH
FORWARD
BACK
NEXT PAGE
PREVIOUS PAGE
Policy Application from A to Z | Warranty Extensions
Page 178
WHAT DOES THIS WARRANTY EXTENSION COVER
This warranty extension covers only the diagnosis and replacement of the secondary air pressure
sensor.
WHAT IS NOT COVERED UNDER THIS WARRANTY EXTENSION
This warranty extension will not cover:
Any damage or malfunctions caused by installation of non-EPA or non-CARB certified parts, or
parts that alter the performance of the engine, engine controls, or exhaust system, such as the
installation of engine management components ("chipped" or "tuned" ECMs) not approved by
Volkswagen.
Other conditions unrelated to the secondary air pressure sensor that may cause the MIL to
illuminate. These conditions may require repairs that are needed for proper diagnosis of the
underlying condition. Any repairs that are (1) necessary for proper diagnosis of these other
conditions or (2) required to bring the vehicle’s emission system up to factory specifications are
not covered by this warranty extension.
Damage or malfunctions caused by outside influence, such as damage due to an accident, or
vehicle misuse or neglect, as well as repairs that are (1) necessary for proper diagnosis of these
other conditions or (2) required to bring the vehicle up to factory specifications are not covered by
this warranty extension.
REPAIR PROCEDURE
Refer to Technical Bulletin Instance Number 2028415 for the applicable repair procedure.
VEHICLE ELIGIBILITY
To determine if a vehicle is eligible for the Secondary Air Pressure Sensor Limited Warranty
Extension, check the VIN in ElsaPro > Vehicle Data. If the warranty extension is applicable to the
vehicle, the "Enhanced Coverage" section of the "Vehicle Data" screen in ElsaPro will be populated
with the warranty extension parameters.
SAGA WARRANTY CLAIM TYPE AND SERVICE NUMBER
Dealers must use the following claim type and service number when submitting warranty claims for the
Secondary Air Pressure Sensor Limited Warranty Extension.
Claim Type:
110
Service Number:
3.63.1.15
2666
FUEL INJECTOR LIMITED WARRANTY EXTENSION
Volkswagen has extended the Emissions Control Systems Warranty for fuel injector replacement
under specific conditions to 10 years or 120,000 miles, whichever occurs first, from the vehicle’s
original in-service date, for certain 2008 – 2012 Model Year Volkswagen 2.0 TFSI Engine vehicles with
engine codes CBFA and CCTA.
Volkswagen of America, Inc.
TABLE OF CONTENTS
INDEX
SEARCH
Warranty Policies and Procedures 06/16
FORWARD
BACK
PREVIOUS PAGE
NEXT PAGE
TABLE OF CONTENTS
INDEX
SEARCH
FORWARD
BACK
PREVIOUS PAGE
Policy Application from A to Z | Warranty Extensions
NEXT PAGE
Page 179
Certain states have voluntarily adopted California-mandated emissions warranties only for vehicles
equipped to meet California’s Partial Zero Emissions Vehicle (PZEV) emissions requirements. These
vehicles can be identified by inspecting the Vehicle Emission Control Information Label located under
the hood. Because of this, the owner of a vehicle equipped to meet California’s PZEV emissions
requirements living in one of these states may have warranty rights that exceed the extended warranty
offering described in this bulletin. Owners should refer to the warranty information that came with their
vehicle for additional details as to whether or not this applies to their vehicle.
The vehicle’s original in-service date is defined as the date the vehicle was delivered to either the
original purchaser or the original lessee; or if the vehicle was first placed in service as a
"demonstrator" or "company" car, on the date such vehicle was first placed in service.
This warranty extension is fully transferable to subsequent owners.
WHAT IS THE PROBLEM
Volkswagen has determined that a faulty fuel injector may cause minor misfire conditions and, in turn,
cause the Malfunction Indicator Lamp (MIL) on the instrument cluster to illuminate due to the presence
of specific fault codes caused by this component.
Please note that it is highly unlikely that the vehicle will experience an issue with multiple fuel injectors
at the same time.
The MIL is part of the on-board diagnostic system. Please refer to the owner’s manual for additional
information about the MIL. In some locales, an illuminated Malfunction Indicator Lamp could cause the
vehicle to fail an IM emissions inspection, and the vehicle registration application could be denied.
Please be aware that other conditions (unrelated to the issue described in this bulletin) may cause the
MIL in the vehicle to illuminate. Customers should be prepared to cover all diagnosis and repair costs
for these other, unrelated conditions.
WHAT DOES THIS WARRANTY EXTENSION COVER
This warranty extension covers only the diagnosis and replacement of a faulty fuel injector.
WHAT IS NOT COVERED UNDER THIS WARRANTY EXTENSION
This warranty extension will not cover:
Any damage or malfunctions caused by installation of non-EPA or non-CARB certified parts, or
parts that alter the performance of the engine, engine controls, or exhaust system, such as the
installation of engine management components ("chipped" or "tuned" ECMs) not approved by
Volkswagen.
Other conditions unrelated to a faulty fuel injector that may cause the MIL to illuminate. These
conditions may require repairs that are needed for proper diagnosis of the underlying condition.
Any repairs that are (1) necessary for proper diagnosis of these other conditions or (2) required to
bring the vehicle’s emission system up to factory specifications are not covered by this warranty
extension.
Damage or malfunctions caused by outside influence, such as damage due to an accident, or
vehicle misuse or neglect, as well as repairs that are (1) necessary for proper diagnosis of these
Volkswagen of America, Inc.
TABLE OF CONTENTS
INDEX
SEARCH
Warranty Policies and Procedures 06/16
FORWARD
BACK
PREVIOUS PAGE
NEXT PAGE
TABLE OF CONTENTS
INDEX
SEARCH
FORWARD
BACK
PREVIOUS PAGE
Policy Application from A to Z | Warranty Extensions
NEXT PAGE
Page 180
other conditions or (2) required to bring the vehicle up to factory specifications are not covered by
this warranty extension.
WARRANTY EXTENSION COVERAGE LIMITATIONS
The warranty and maintenance information that came with the owner’s vehicle contains information on
the limited warranties applicable to their Volkswagen model. Owners should read these limited
warranties carefully to determine their warranty rights and obligations, as this information also applies
to the coverage provided to them in this warranty extension.
REPAIR PROCEDURE
Refer to Technical Bulletin Instance Number 2033805 (01-13-14) for the applicable repair procedure.
VEHICLE ELIGIBILITY
To determine if a vehicle is eligible for the Fuel Injector Limited Warranty Extension, check the VIN in
ElsaPro > Vehicle Data. If the warranty extension is applicable to the vehicle, the "Enhanced
Coverage" section of the "Vehicle Data" screen in ElsaPro will be populated with the warranty
extension parameters.
SAGA WARRANTY CLAIM TYPE AND SERVICE NUMBER
Dealers must use the following claim type and service number when submitting warranty claims for the
Fuel Injector Limited Warranty Extension.
Claim Type:
Service Number:
110
2440
ADDITIONAL IMPORTANT INFORMATION
Warranty will only cover a defective fuel injector
The "comments" field of the warranty claim must include the applicable fault(s) supporting the
repair
Paperless GFF (or printed copy) must be available
3.63.1.16
INTAKE MANIFOLD LIMITED WARRANTY EXTENSION
Volkswagen has extended the Emissions Control Systems Warranty for the intake manifold under
specific conditions to 10 years or 120,000 miles, whichever occurs first, from the vehicle’s original inservice date, for certain 2008 – 2012 Model Year Volkswagen 2.0 TFSI Engine vehicles with engine
codes CBFA and CCTA.
Certain states have voluntarily adopted California-mandated emissions warranties only for vehicles
equipped to meet California’s Partial Zero Emissions Vehicle (PZEV) emissions requirements. These
vehicles can be identified by inspecting the Vehicle Emission Control Information Label located under
the hood. Because of this, the owner of a vehicle equipped to meet California’s PZEV emissions
requirements living in one of these states may have warranty rights that exceed the extended warranty
Volkswagen of America, Inc.
TABLE OF CONTENTS
INDEX
SEARCH
Warranty Policies and Procedures 06/16
FORWARD
BACK
PREVIOUS PAGE
NEXT PAGE
TABLE OF CONTENTS
INDEX
SEARCH
FORWARD
BACK
NEXT PAGE
PREVIOUS PAGE
Policy Application from A to Z | Warranty Extensions
Page 181
offering described in this bulletin. Owners should refer to the warranty information that came with their
vehicle for additional details as to whether or not this applies to their vehicle.
The vehicle’s original in-service date is defined as the date the vehicle was delivered to either the
original purchaser or the original lessee; or if the vehicle was first placed in service as a
"demonstrator" or "company" car, on the date such vehicle was first placed in service.
This warranty extension is fully transferable to subsequent owners.
WHAT IS THE PROBLEM
Volkswagen has determined that, under specific conditions, a faulty intake manifold may cause the
Malfunction Indicator Lamp (MIL) on the instrument cluster to illuminate due to the presence of specific
fault codes caused by this component.
The MIL is part of the on-board diagnostic system. Please refer to the owner’s manual for additional
information about the MIL. In some locales, an illuminated Malfunction Indicator Lamp could cause the
vehicle to fail an IM emissions inspection, and the vehicle registration application could be denied.
Please be aware that other conditions (unrelated to the issue described in this bulletin) may cause the
MIL in the vehicle to illuminate. Customers should be prepared to cover all diagnosis and repair costs
for these other, unrelated conditions.
WHAT DOES THIS WARRANTY EXTENSION COVER
This warranty extension covers only the diagnosis and replacement of a faulty intake manifold.
WHAT IS NOT COVERED UNDER THIS WARRANTY EXTENSION
This warranty extension will not cover:
Any damage or malfunctions caused by installation of non-EPA or non-CARB certified parts, or
parts that alter the performance of the engine, engine controls, or exhaust system, such as the
installation of engine management components ("chipped" or "tuned" ECMs) not approved by
Volkswagen.
Other conditions unrelated to a faulty intake manifold that may cause the MIL to illuminate. These
conditions may require repairs that are needed for proper diagnosis of the underlying condition.
Any repairs that are (1) necessary for proper diagnosis of these other conditions or (2) required to
bring the vehicle’s emission system up to factory specifications are not covered by this warranty
extension.
Damage or malfunctions caused by outside influence, such as damage due to an accident, or
vehicle misuse or neglect, as well as repairs that are (1) necessary for proper diagnosis of these
other conditions or (2) required to bring the vehicle up to factory specifications are not covered by
this warranty extension.
WARRANTY EXTENSION COVERAGE LIMITATIONS
The warranty and maintenance information that came with the owner’s vehicle contains information on
the limited warranties applicable to their Volkswagen model. Owners should read these limited
warranties carefully to determine their warranty rights and obligations, as this information also applies
to the coverage provided to them in this warranty extension.
Volkswagen of America, Inc.
TABLE OF CONTENTS
INDEX
SEARCH
Warranty Policies and Procedures 06/16
FORWARD
BACK
PREVIOUS PAGE
NEXT PAGE
TABLE OF CONTENTS
INDEX
SEARCH
FORWARD
BACK
NEXT PAGE
PREVIOUS PAGE
Policy Application from A to Z | Warranty Extensions
Page 182
REPAIR PROCEDURE
Refer to ElsaPro for the applicable repair procedure. Refer to Technical Bulletin Instance Number
2031075 for assistance in diagnosis.
VEHICLE ELIGIBILITY
To determine if a vehicle is eligible for the Intake Manifold Limited Warranty Extension, check the VIN
in ElsaPro > Vehicle Data. If the warranty extension is applicable to the vehicle, the "Enhanced
Coverage" section of the "Vehicle Data" screen in ElsaPro will be populated with the warranty
extension parameters.
SAGA WARRANTY CLAIM TYPE AND SERVICE NUMBER
Dealers must use the following claim type and service number when submitting warranty claims for the
Intake Manifold Limited Warranty Extension.
Claim Type:
Service Number:
1PT
2447
ADDITIONAL IMPORTANT INFORMATION
Warranty will only cover a defective intake manifold
The "comments" field of the warranty claim must include the applicable fault(s) supporting the
repair
Paperless GFF (or printed copy) must be available
3.63.1.17
TURBOCHARGER LIMITED WARRANTY EXTENSION
Volkswagen has extended the Emissions Control Systems Warranty for the turbocharger under
specific conditions to 10 years or 120,000 miles, whichever occurs first, from the vehicle’s original inservice date, for certain 2012 – 2013 Model Year Volkswagen Passat TDI engine vehicles with engine
code CKRA.
The vehicle’s original in-service date is defined as the date the vehicle was delivered to either the
original purchaser or the original lessee; or if the vehicle was first placed in service as a
"demonstrator" or "company" car, on the date such vehicle was first placed in service.
This warranty extension is fully transferable to subsequent owners.
WHAT IS THE PROBLEM
Volkswagen has determined that, under specific conditions, the turbocharger could malfunction and
may cause the Malfunction Indicator Lamp (MIL) on the instrument cluster to illuminate due to the
presence of specific fault codes caused by this component. Additionally, you may hear noise coming
from the turbocharger. This condition may also lead to reduced engine performance if the MIL-on
issue is not addressed.
Volkswagen of America, Inc.
TABLE OF CONTENTS
INDEX
SEARCH
Warranty Policies and Procedures 06/16
FORWARD
BACK
PREVIOUS PAGE
NEXT PAGE
TABLE OF CONTENTS
INDEX
SEARCH
FORWARD
BACK
NEXT PAGE
PREVIOUS PAGE
Policy Application from A to Z | Warranty Extensions
Page 183
The MIL is part of the on-board diagnostic system. Please refer to the owner’s manual for additional
information about the MIL. In some locales, an illuminated Malfunction Indicator Lamp could cause the
vehicle to fail a smog check inspection, and the vehicle registration application could be denied.
Please be aware that other conditions (unrelated to the issue described in this bulletin) may cause the
MIL in the vehicle to illuminate. Customers should be prepared to cover all diagnosis and repair costs
for these other, unrelated conditions.
WHAT DOES THIS WARRANTY EXTENSION COVER
This warranty extension covers only the diagnosis and replacement of a faulty turbocharger.
WHAT IS NOT COVERED UNDER THIS WARRANTY EXTENSION
This warranty extension will not cover:
Any damage or malfunctions caused by installation of non-EPA or non-CARB certified parts, or
parts that alter the performance of the engine, engine controls, or exhaust system, such as the
installation of engine management components ("chipped" or "tuned" ECMs) not approved by
Volkswagen.
Other conditions unrelated to a faulty turbocharger that may cause the MIL to illuminate. These
conditions may require repairs that are needed for proper diagnosis of the underlying condition.
Any repairs that are (1) necessary for proper diagnosis of these other conditions or (2) required to
bring the vehicle’s emission system up to factory specifications are not covered by this warranty
extension.
Damage or malfunctions caused by outside influence, such as damage due to an accident, or
vehicle misuse or neglect, as well as repairs that are (1) necessary for proper diagnosis of these
other conditions or (2) required to bring the vehicle up to factory specifications are not covered by
this warranty extension.
WARRANTY EXTENSION COVERAGE LIMITATIONS
The warranty and maintenance information that came with the owner’s vehicle contains information on
the limited warranties applicable to their Volkswagen model. Owners should read these limited
warranties carefully to determine their warranty rights and obligations, as this information also applies
to the coverage provided to them in this warranty extension.
REPAIR PROCEDURE
Refer to Technical Bulletin Instance Number 2036110 for the applicable repair procedure.
VEHICLE ELIGIBILITY
To determine if a vehicle is eligible for the Turbocharger Limited Warranty Extension, check the VIN in
ElsaPro > Vehicle Data. If the warranty extension is applicable to the vehicle, the "Enhanced
Coverage" section of the "Vehicle Data" screen in ElsaPro will be populated with the warranty
extension parameters.
Volkswagen of America, Inc.
TABLE OF CONTENTS
INDEX
SEARCH
Warranty Policies and Procedures 06/16
FORWARD
BACK
PREVIOUS PAGE
NEXT PAGE
TABLE OF CONTENTS
INDEX
SEARCH
FORWARD
BACK
PREVIOUS PAGE
Policy Application from A to Z | Warranty Extensions
NEXT PAGE
Page 184
SAGA WARRANTY CLAIM TYPE AND SERVICE NUMBER
Dealers must use the following claim type and service number when submitting warranty claims for the
Turbocharger Limited Warranty Extension.
Claim Type:
1PT
Service Number:
2130
3.63.1.18
DRIVER’S DOOR WIRING HARNESS LIMITED WARRANTY EXTENSION FOR MY 2005 OR 2006
(A5) JETTA VEHICLES (VIN RANGE FROM 1K_5M000001 TO 1K_6M759703)
The New Vehicle Limited Warranty for the driver’s door wiring harness for Model Year 2005 or 2006
(A5) Jetta vehicles, VIN range from 1K_5M000001 to 1K_6M759703, is extended to 8 ½ years or
100,000 miles, whichever occurs first, from the vehicle’s original in-service date. The vehicle’s original
in-service date is defined as the date the vehicle was delivered to either the original purchaser or the
original lessee; or if the vehicle was first placed in service as a "demonstrator" or "company" car, on
the date such vehicle was first placed in service.
EXTENDED WARRANTY PARAMETERS
The extension will cover the repair or replacement, by an authorized Volkswagen dealer, of the
driver’s door wiring harness (VWGoA part number 1K5971120H or 1K5971120G) installed in the
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: VW WPP 06 2016
Replacement Service Bulletin Number:
MFR Communication Date: 2016-06-30
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.